Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Quantum fluids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

CFD Analysis of RLUOB Zone 1 HEPA Filter Plenum and Testing Manifolds

The purpose of this computational fluid dynamics (CFD) analysis is to ensure that Camfil Farr’s upstream and downstream injection and sampling manifolds can meet or exceed the requirements outlined in the ASME AG-1 1997 a(2000) Code on Nuclear Air and Gas Treatment for the testing of HEPA and adsorbent filters. This paper will present a numerical simulation of airflow in the Radiological Laboratory Utility Office Building (RLUOB) zone 1 HEPA filter plenum and testing manifolds using the commercial CFD software ANSYS FLUENT 2020R1. The CFD analysis focuses on the investigation of the air flow distribution and air-aerosol mixing uniformity. The evaluation was done for all steps of the modeling process: grid generation, physics setup, simulation, and post-processing. The mass flow rate in each section of the zone 1 injection and sampling manifolds is also reported.

42 ENGINEERING↗
DOE OSTI2021

Direct numerical simulation of supercritical oxy-methane mixing layers with CO 2 substituted counterparts

Direct numerical simulations (DNS) of temporally developing, three dimensional, CH 4 /CO 2 , CH 4 /O 2 and CO 2 /O 2 mixing layers, are conducted at a supercritical pressure of 300 atm. To effectively model the supercritical regime, the employed formulation includes the compressible form of the governing equations, the cubic Peng-Robinson equation of state and a generalized formulation for heat and mass flux vectors derived from non-equilibrium thermodynamics and fluctuation theory. A linear inviscid stability analysis is also performed for each case, to determine its most unstable wavelength. Flow visualizations reveal the presence of high density gradient magnitude regions for all three mixing layers, with conditional averages indicating increased presence of heavier fluid species within these regions. No significant departures are observed from perfect gas behavior, with compressibility factors very close to unity for all three mixing cases. Applicability of presumed probability density function methods (PDF) is examined for the three supercritical mixing layers. An a priori analysis is also conducted to investigate various simplifying assumptions employed in modeling various subgrid scale (SGS) flux models. Two additional terms are identified in the large eddy simulations (LES) equations, the gradient of SGS contribution of pressure in the momentum equation and the gradient of SGS contribution of heat flux in energy equation, whose magnitudes are similar and comparable with their respective resolved terms. The performance of the scale similarity model to represent these additional terms is investigated. Lastly, the performance of Smagorinsky, gradient and scale similarity models are also investigated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Recurrent convolutional neural networks for modeling nonadiabatic dynamics of quantum-classical systems

Recurrent neural networks (RNNs) have recently been extensively applied to model the time evolution in fluid dynamics, weather predictions, and even chaotic systems due to their ability to capture temporal dependencies and sequential patterns in data. Here we present an RNN model based on convolutional neural networks for modeling the nonlinear nonadiabatic dynamics of hybrid quantum-classical systems. The dynamical evolution of the hybrid systems is governed by equations of motion for classical degrees of freedom and von Neumann equation for electrons. The Physics-Aware Recurrent Convolution (PARC) neural network structure incorporates a differentiator-integrator architecture that inductively models the spatiotemporal dynamics of generic physical systems. Here, we apply our RNN approach to learn the space-time evolution of a one-dimensional semiclassical Holstein model after an interaction quench. For shallow quenches (small changes in electron-lattice coupling), the deterministic dynamics can be accurately captured using a single-CNN-based recurrent network. In contrast, deep quenches induce chaotic evolution, making long-term trajectory prediction significantly more challenging. Nonetheless, we demonstrate that the PARC-CNN architecture can effectively learn the statistical climate of the Holstein model under deep-quench conditions.

Holstein model↗
DOE OSTI2022

Fluid structure interaction of a subaqueous pendulum: Analyzing the effect of wake correction via large eddy simulations

The dynamic behavior of a subaqueous cylindrical pendulum and corresponding flow dynamics are investigated. The objectives were twofold: (i) to examine whether the two-dimensional model equations sufficiently capture the three-dimensional dynamics and (ii) to investigate the emerging three-dimensional vortical flow structures. Large eddy simulations with two-way coupling fluid structure interaction were carried out using the immersed boundary method to simulate the motion of the pendulum and its interactions with the initially stagnant water. The resulting pendulum motion is compared against measured data obtained in a series of experimental tests to validate the simulation results and the model equations with and without wake corrections. An analysis of the flow vorticity revealed the development of a vortex ring during the first swing and the formation of tip vortices. The evolution of the vortex rings emerging from the motion of the subaqueous cylindrical pendulum was visualized using Q-criteria showing a reasonable agreement with vortical structures observed in the experiment using particle imaging velocimetry. The hydrodynamic moments acting on the simulated pendulum and the moments calculated from the model equations are analyzed. Using the insights from these numerical simulations, a modification of the wake correction is proposed to enhance the accuracy of the rate of decay and period. The transient effect of coherent flow on pendulum dynamics, especially the added mass effect, is discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Prospects of federated machine learning in fluid dynamics

Physics-based models have been mainstream in fluid dynamics for developing predictive models. In recent years, machine learning has offered a renaissance to the fluid community due to the rapid developments in data science, processing units, neural network based technologies, and sensor adaptations. So far in many applications in fluid dynamics, machine learning approaches have been mostly focused on a standard process that requires centralizing the training data on a designated machine or in a data center. In this article, we present a federated machine learning approach that enables localized clients to collaboratively learn an aggregated and shared predictive model while keeping all the training data on each edge device. We demonstrate the feasibility and prospects of such a decentralized learning approach with an effort to forge a deep learning surrogate model for reconstructing spatiotemporal fields. Our results indicate that federated machine learning might be a viable tool for designing highly accurate predictive decentralized digital twins relevant to fluid dynamics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Shear-induced lift force on spheres in a viscous linear shear flow at finite volume fractions

Several studies have shown a significant increase in drag on a distribution of solid spherical particles within a fluid with increasing particle volume fraction. As a result, many empirical drag laws accounting for the dependence on the Reynolds number and volume fraction can be found in the literature. This study investigates the possibility of a similar effect of the particle volume fraction on the mean hydrodynamic lift force on randomly distributed spherical particles in a linear shear flow. Particle-resolved direct numerical simulations are performed to evaluate the mean lift force, and the results are compared with the case of an isolated particle in a linear shear flow for the same Reynolds number and shear rate. The mean lift force acting on the particles appears to remain nearly the same as that on an isolated particle. However, due to the influence of neighboring particles, there is a substantial force variation in transverse directions on each individual particle, whose magnitude is comparable to the mean drag force. The distribution of drag force in a linear shear flow is shown to be nearly the same as in a uniform flow at the same volume fraction and Reynolds number. A simple stochastic model based on a Gaussian distribution is presented for the lift force variation, and its performance is compared to the prediction of the deterministic pairwise interaction extended point-particle model.

42 ENGINEERING↗
DOE OSTI2023

Superconducting valence bond fluid in lightly doped eight-leg $t-J$ cylinders

Superconductivity in doped quantum paramagnets has been a subject of long theoretical inquiry. In this work, we report a density matrix renormalization group study of lightly doped $t-J$ models on the finite-width square lattice (doped hole densities $δ$ = 1/12 and 1/8) with parameters for which previous studies have suggested that the undoped system in 2D is either a quantum spin liquid or a valence bond crystal. Our studies are performed on cylinders with width up to 8. Here, ground-state correlations are found to be nearly identical for the “doped quantum spin liquid” and “doped valence bond crystal.” Upon increasing the cylinder widths from 4 to 8, we observed a significant strengthening of the quasi-long-range superconducting correlations and a dramatic suppression of any “competing” charge density wave order. Extrapolating from the observed behavior of the width eight cylinders, we speculate that the system has a nodeless $d$-wave superconducting ground state in the 2D limit.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Corona splashing triggered by a loose monolayer of particles

In nature, high-speed raindrops often impact and spread on particulate surfaces (e.g., soil, plant leaves with spores or pollen). We study the dynamics of droplet impact on a loosely packed monolayer of particles by combining experimental and mathematical approaches. We find that the presence of mobile particles lowers the critical impact velocity at which the droplet exhibits corona splashing, as the particle area fraction is systematically increased. We rationalize this experimental observation by considering the jamming of frictional particles at the spreading rim. Elucidating the splashing transition of the drop on a particulate bed can lead to a better understanding of soil loss and erosion from falling raindrops

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Geometry and dynamics of passive scalar structures in compressible turbulent mixing

We present a structure-based numerical analysis of passive scalar mixing in decaying homogeneous isotropic turbulence (DHIT) and shock-turbulence interaction canonical configurations. The analysis focuses on the temporal evolution of ensembles of passive scalar structures, initialized as spheres of different sizes relative to the Taylor microscale. An algorithm is introduced to track the evolution of each individual structure and the interactions with other structures in the ensemble, relating changes in the surface geometry and the underlying physical processes (turbulent transport, scalar dissipation, and shock compression). The tracking algorithm is applied to datasets from shock-capturing direct numerical simulations of DHIT, with Taylor microscale Reynolds number Re λ =40 and turbulence Mach number M t =0.2 ⁠, and STI cases in which the turbulence is processed by a shock wave at Mach numbers M = 1.5 and 3.0. Temporal surface convolution increases for initially larger structures, resulting in a higher probability of locally hyperbolic geometries where breakup into smaller structures occurs. Shock-induced deformation of the structures amplifies breakup processes, enhancing mixing, particularly for larger structures. Mixing enhancement by the shock is manifested as an amplification of the surface-averaged scalar gradient, which increases for initially larger structures. The alignment between the scalar gradient and the most extensional strain-rate eigendirection on the scalar isosurfaces also increases across the shock. Larger magnitudes of the scalar gradient and its alignment with the most compressive strain-rate eigendirection correlate with flatter surface regions. Shock-induced structure compression increases the area coverage of flat regions, where the amplification of scalar gradient is localized.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

A constitutive model for sheared dense fiber suspensions

Here we propose a constitutive model to predict the viscosity of fiber suspensions, which undergoes shear thinning, at various volume fractions, aspect ratios, and shear stresses/rates. We calibrate the model using the data from direct numerical simulation and prove the accuracy by predicting experimental measurements from the literature. We use a friction coefficient decreasing with the normal load between the fibers to quantitatively reproduce the experimentally observed shear thinning in fiber suspensions. In this model, the effective normal contact force, which is directly proportional to the bulk shear stress, determines the effective friction coefficient. A rise in the shear stress reduces the effective friction coefficient in the suspension. As a result, the jamming volume fraction increases with the shear stress, resulting in a shear thinning in the suspension viscosity. Moreover, we extend the model to quantify the effects of fiber volume fraction and aspect ratio in the suspension. We calibrate this model using the data from numerical simulations for the rate-controlled shear flow. Once calibrated, we show that the model can be used to predict the relative viscosity for different volume fractions, shear stresses, and aspect ratios. The model predictions are in excellent agreement with the available experimental measurements from the literature. The findings of this study can potentially be used to tune the fiber size and volume fraction for designing the suspension rheology in various applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Posterior comparison of model dynamics in several hybrid turbulence model forms

Hybrid turbulence models that can accurately reproduce unsteady three-dimensional flow physics across the entire range of grid scales and turbulence dynamics from Reynolds-averaged Navier–Stokes (RANS), through large-eddy simulation (LES), down to direct numerical simulations (DNS) are of increasing interest to the turbulence modeling community. However, despite decades of research and development, the basic tasks of eliminating poor-performing hybrid RANS-LES models and accelerating adoption of superior models through well-designed validation and verification have yet to occur. As a step in this direction, in this work we evaluate thirteen different hybrid RANS-LES models via systematic grid refinement of decaying homogeneous isotropic turbulence. We further derive a novel mathematical framework for assessing the energy partitioning dynamics of each Hybrid RANS-LES model, wherein model-to-model variations in energy partitioning can be interpreted as different feedback mechanisms operating on a low-dimensional nonlinear dynamical system. We found that model forms similar to the flow simulation methodology—also often termed very-large eddy simulation—are dynamically inconsistent with DNS at all resolutions. Additionally, we found a strong dynamical similarity in the feedback mechanisms of all models related to detached eddy simulation and partially averaged Navier–Stokes that is inherent to their general model forms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Axion structure formation – II. The wrath of collapse

ABSTRACT The first paper in this series showed that quantum chromodynamic axion dark matter, as a highly correlated Bose fluid, contains extra-classical physics on cosmological scales. The source of the derived extra-classical physics is exchange–correlation interactions induced by the constraints of symmetric particle exchange and interaxion correlations from self-gravitation. The paper also showed that the impact of extra-classical physics on early structure formation is marginal, as the exchange–correlation interaction is inherently non-linear. This paper continues the study of axion structure formation into the non-linear regime, considering the case of full collapse and virialization. The N-body method is chosen to study the collapse, and its algorithms are derived for a condensed Bose fluid. Simulations of isolated gravitational collapse are performed for both Bose and cold dark matter fluids using a prototype N-body code. Unique Bose structures are found to survive even the most violent collapses. Bose post-collapse features include dynamical changes to global structures, creation of new broad sub-structures, violations of classical binding energy conditions, and new fine structures. Effective models of the novel structures are constructed and possibilities for their observation are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Temporal dynamics of the alignment of the turbulent stress and strain rate

We report that the flux of energy between scales in turbulence can be cast as the result of the interaction between a turbulent stress and a rate of strain. Efficient energy transfer requires that these two tensors be oriented properly relative to each other, but previous work has shown that the instantaneous alignment between them is poor. Here, we consider the temporal dynamics of this alignment in a direct numerical simulation of isotropic turbulence. We show that the orientation of the stress lags behind that of the strain rate, both at a single location and along trajectories. However, the timescale of the reorientation of the stress in these cases does not follow the expected dynamical scaling with length scale. To capture the proper dynamical scaling, we reformulate the energy flux between scales using the right Cauchy-Green strain tensor and the second Piola-Kirchhoff stress tensor. Our results highlight the key role played by the deformation of fluid elements in the physics of the energy cascade, and suggest that their irreversible deformation is a Lagrangian manifestation of the cascade's broken time-reversal symmetry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Semiconductor Nanostructures by Scientific Design (Final Technical Report)

We developed and used quantum simulation techniques to predict structural, electronic, optical and thermal properties affecting the scientific design of semiconductor nanostructures. We focused on the study of surfaces and interfaces at the nanoscale, in particular embedding and solvation of semiconductor nanoparticles, and provided a microscopic description of nanostructured materials in realistic environments, directly comparable with experimental conditions. We addressed three major problems: (i) the design of realistic structural models of integrated nanostructures, e.g. quantum dots embedded in solid matrices and nanostructures immersed in fluids; (ii) the development of efficient and accurate calculations to describe the excited state properties of nanostructures, beyond standard Density Functional Theory, so as to understand and predict electronic properties involved in renewable energy applications, for example solar conversion devices. In particular we developed and used methods based on a many body perturbation theory. (iii) the development of calculations of heat transport properties of nanostructured materials, for thermoelectric applications, including predictive calculations of thermal and electrical conductivity and of Seebeck coefficients. Specifically, we developed and used methods based on the Boltzmann transport equation and molecular dynamics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Competition between excitonic insulators and quantum Hall states in correlated electron–hole bilayers

Excitonic insulators represent a unique quantum phase of matter that enables the study of exotic quantum bosonic states. Strongly coupled electron–hole bilayers, which host stable dipolar exciton fluids with an exciton density that can be adjusted electrostatically, offer an ideal platform to investigate correlated excitonic insulators. On the basis of electron–hole bilayers made of MoSe2/hexagonal boron nitride/WSe2 heterostructures, here we study the behaviour of excitonic insulators in a perpendicular magnetic field. We report the observation of excitonic quantum oscillations in both Coulomb drag signals and electrical resistance at low to medium magnetic fields. Under a strong magnetic field, we identify multiple quantum phase transitions between the excitonic insulator phase and the bilayer quantum Hall insulator phase. These findings underscore the interplay between the electron–hole interactions and Landau-level quantization, and enable further exploration of quantum phenomena in composite bosonic insulators.

Qi, Ruishi↗
DOE OSTI2020

Deformation of Lie–Poisson algebras and chirality

Linearization of a Hamiltonian system around an equilibrium point yields a set of Hamiltonian symmetric spectra: If λ is an eigenvalue of the linearized generator, -λ and $\barλ$ (hence, -$\barλ$) are also eigenvalues—the former implies a time-reversal symmetry, while the latter guarantees the reality of the solution. However, linearization around a singular equilibrium point (which commonly exists in noncanonical Hamiltonian systems) works out differently, resulting in breaking of the Hamiltonian symmetry of spectra; time-reversal asymmetry causes chirality. This interesting phenomenon was first found in analyzing the chiral motion of the rattleback, a boat-shaped top having misaligned axes of inertia and geometry [Z. Yoshida et al., Phys. Lett. A 381, 2772–2777 (2017)]. To elucidate how chiral spectra are generated, we study the three-dimensional Lie–Poisson systems and classify the prototypes of singularities that cause symmetry breaking. The central idea is the deformation of the underlying Lie algebra; invoking Bianchi’s list of all three-dimensional Lie algebras, we show that the so-called class-B algebras, which are produced by asymmetric deformations of the simple algebra s o ( 3 ) , yield chiral spectra when linearized around their singularities. The theory of deformation is generalized to higher dimensions, including the infinite-dimensional Poisson manifolds relevant to fluid mechanics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Anisotropic fluid dynamical simulations of heavy-ion collisions

We present VAH, a (3+1)–dimensional simulation that evolves the far-from-equilibrium quark-gluon plasma produced in ultrarelativistic heavy-ion collisions with anisotropic fluid dynamics. We solve the hydrodynamic equations on an Eulerian grid using the Kurganov–Tadmor algorithm in combination with a new adaptive Runge–Kutta method. Our numerical scheme allows us to start the simulation soon after the nuclear collision, largely avoiding the need to integrate it with a separate pre-equilibrium dynamics module. We test the code's performance by simulating on the Eulerian grid conformal and non-conformal Bjorken flow as well as conformal Gubser flow, whose (0+1)–dimensional solutions are precisely known. Finally, we compare non-conformal anisotropic hydrodynamics to second-order viscous hydrodynamics in central Pb+Pb collisions and find that the former's longitudinal flow profile responds more consistently to the fluid's gradients along the spacetime rapidity direction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Turbulent flow characteristics in an 84-pin rod bundle for typical and damaged spacer grids

Hexagonal rod bundles arranged in a tightly packed triangular lattice are extensively used for heat transfer and energy generation applications. Staggered spacer grids are used to maintain the structural integrity of gas-cooled fast reactor (GFR) fuel assemblies, while inducing localized turbulence in flow. Damage to these spacer grids results in a disruption of flow fields within these hexagonal fuel bundles. Experimental flow visualizations are critical to identify the differences in local flow properties that the structural damage may cause. This experimental research investigates the flow-field characteristics at a near-wall and center plane in a prototypical 84-pin GFR fuel assembly. Newly installed typical spacers and spacers subject to naturally occurring damage due to material degradation over prolonged experimentation were investigated. Velocity fields were acquired by utilizing the matched-index-of-refraction method to obtain time-resolved particle image velocimetry measurements for a Reynolds number of 12 000. Reynolds decomposition statistical results divulged differences in the time-averaged velocity, velocity fluctuations, flow anisotropy, and Reynolds stress distributions. Galilean decomposition demarcated the influence of spacer grid damage on the velocity fields. To extract turbulent structures and elucidate mechanisms of flow instabilities, proper orthogonal decomposition analysis was employed. Reduced order flow reconstructions enabled the application of vortex identification algorithms to determine the spatial and statistical characteristics of vortices generated. This research work provides unique experimental data on the spacer grid condition-dependent flow. The results offer a deeper understanding of fluid dynamics behavior to support GFR rod bundle design efforts and computational fluid dynamics model validation.

36 MATERIALS SCIENCE↗