Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Structural Phase Separation and Enhanced Superconductivity in La 1.875 Ba 0.125 CuO 4 Under Uniaxial Strain

Strain engineering has attracted significant attention in recent years due to its capability in tuning lattice and electronic structures of quantum materials. Using moderate uniaxial compressive strain, structural phase separation is induced in the low-temperature phase of x = 1/8 La 2-x Ba x CuO 4 (LBCO) single crystals. These structures are low temperature tetragonal (LTT), low temperature less orthorhombic (LTLO), and a plastically deformed nano-domain structure (PDNS), comprised of few-nanometer-sized orthorhombic domains within an amorphous matrix. These three structures exhibit distinct superconducting behaviors. The volume fraction of the LTT structure is suppressed with increasing strain, while its superconducting transition temperature increases and broadens. The LTLO structure exhibits a sharp superconducting transition above 32 K, which increases up to ≈ 36 K at maximum strain. The PDNS phase exhibits a very broad superconducting transition and persists even after removing the strain. This study illustrates the sensitivity of superconductivity to the structure of the LBCO sample near its stripe instability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1975

Thermodynamics and phase separation of dense fully-ionized hydrogen-helium fluid mixtures

The free energy of a hydrogen-helium fluid mixture is evaluated for the temperatures and densities appropriate to the deep interior of a giant planet such as Jupiter. The electrons are assumed to be fully pressure-ionized and degenerate. In this regime, an appropriate first approximation to the ionic distribution functions can be found by assuming hard sphere interactions. Corrections to this approximation are incorporated by means of the perturbation theory of Anderson and Chandler. Approximations for the three-body interactions and the nonlinear response of the electron gas to the ions are included. It is predicted that a hydrogen-helium mixture, containing 10% by number of helium ions, separates into hydrogen-rich and helium-rich phases below about 8000 K, at the pressures relevant to Jupiter (4-40 Megabars). It is also predicted that the alloy occupies less volume per ion than the separated phases. The equations of state and other thermodynamic derivatives are tabulated. Implications of these results are discussed.

Stevenson, D. J.↗
DOE OSTI2025

Competing pair density wave and uniform 𝑑-wave superconductivity in phase-separated 214 cuprates at the 1/8 anomaly

Compelling evidence exists for electronic phase separation in cuprate high-𝑇𝑐 superconductors, emerging near 1/8 hole doping. At these dopings and low temperatures, intertwined charge and spin stripes coexist with more uniformly doped regions in the two-dimensional (2D) copper-oxide planes. Each region is capable of developing superconducting pairing, either as a pair density wave (PDW) within the stripes or as a uniform 𝑑-wave condensate (𝑑-SC) in the more homogeneous regions. Using neutron scattering on single crystals of La1.875−𝑦⁢Nd𝑦⁢Sr0.125⁢CuO4, we demonstrate that the onset temperatures for spin stripe order (𝑇𝑁) and superconductivity (𝑇𝑐) merge as the average ordered moment vanishes in LSCO (𝑦=0), whereas Nd doping stabilizes static stripe order and suppresses 𝑇𝑐. Because the spin stripes possess the same in-plane periodicity (8⁢𝑎) as the PDW and establish the framework within which the PDW resides, the stabilization of spin stripe order enhances PDW correlations. Thus, the competition between 𝑑-wave pairing in the uniform regions and PDW pairing in the stripe-ordered regions can be controlled by the Nd concentration in La1.875−𝑦⁢Nd𝑦⁢Sr0.125⁢CuO4, allowing the superconducting 𝑇𝑐 to vary by nearly an order of magnitude at a fixed 1/8-hole doping.

Aczel, Adam [ORNL] (ORCID:0000000319641943)↗
NASA NTRS2012

Microgravity Passive Phase Separator

A new invention disclosure discusses a structure and process for separating gas from liquids in microgravity. The Microgravity Passive Phase Separator consists of two concentric, pleated, woven stainless- steel screens (25-micrometer nominal pore) with an axial inlet, and an annular outlet between both screens (see figure). Water enters at one end of the center screen at high velocity, eventually passing through the inner screen and out through the annular exit. As gas is introduced into the flow stream, the drag force exerted on the bubble pushes it downstream until flow stagnation or until it reaches an equilibrium point between the surface tension holding bubble to the screen and the drag force. Gas bubbles of a given size will form a front that is moved further down the length of the inner screen with increasing velocity. As more bubbles are added, the front location will remain fixed, but additional bubbles will move to the end of the unit, eventually coming to rest in the large cavity between the unit housing and the outer screen (storage area). Owing to the small size of the pores and the hydrophilic nature of the screen material, gas does not pass through the screen and is retained within the unit for emptying during ground processing. If debris is picked up on the screen, the area closest to the inlet will become clogged, so high-velocity flow will persist farther down the length of the center screen, pushing the bubble front further from the inlet of the inner screen. It is desired to keep the velocity high enough so that, for any bubble size, an area of clean screen exists between the bubbles and the debris. The primary benefits of this innovation are the lack of any need for additional power, strip gas, or location for venting the separated gas. As the unit contains no membrane, the transport fluid will not be lost due to evaporation in the process of gas separation. Separation is performed with relatively low pressure drop based on the large surface area of the separating screen. Additionally, there are no moving parts, and there are no failure modes that involve fluid loss. A patent application has been filed.

Paragano, Matthew↗
NASA NTRS1981

Vapor-liquid phase separator permeability results

Continued studies are described in the area of vapor-liquid phase separator work with emphasis on permeabilities of porous sintered plugs (stainless steel, nominal pore size 2 micrometer). The temperature dependence of the permeability has been evaluated in classical fluid using He-4 gas at atmospheric pressure and in He-2 on the basis of a modified, thermosmotic permeability of the normal fluid.

Yuan, S. W. K.↗
NASA NTRS1995

Transport phenomena in the micropores of plug-type phase separators

This study numerically investigates the transport phenomena within and across a porous-plug phase separator. The effect of temperature differential across a single pore and of the sidewall boundary conditions, i.e., isothermal or linear thermal gradient, are presented and discussed. The effects are quantified in terms of the evaporation mass flux across the boundary and the mean surface temperature. A two-dimensional finite element model is used to solve the continuity, momentum, and energy equations for the liquid. Temperature differentials across the pore interface of 1.0, and 1.5 K are examined and their effect on evaporation flux and mean surface temperature is shown. For isothermal side boundary conditions, the evaporation flux across the pore is directly proportional and linear with Delta T. For the case of an imposed linear thermal gradient on the side boundaries, Biot numbers of 0.0, 0.15, and 0.5 are examined. The most significant effect of Biot number is to lower the overall surface temperature and evaporation flux.

Fazah, M. M.↗
DOE OSTI2025

Holistic Microstructure Control Strategies in Photopolymerization‐Induced Phase Separation of Acrylate Systems

Open porous materials, known for their large surface area and interconnected structures, are essential in various applications, including batteries, ion exchange, catalysis, filtration, and electronic waste recycling. A critical aspect of the functionality of porous membranes is the precise control of pore size and morphology. Photopolymerization-induced phase separation (photo-PIPS) offers a convenient and versatile methods for creating porous structures. However, controlling the porous morphology remains challenging due to the complex interplay between thermodynamics, polymerization kinetics, and monomer structures, which makes it difficult to establish the relationship between processing conditions and resulting morphology in photo-PIPS. Herein, a physics-based phase-field model capable of generating and characterizing the microstructures of porous materials based on both average and localized features is developed. Using the phase-field simulations as test bed, the effects of polarity, light intensity, and curing temperature, as well as the previously unexplored roles of chain transfer agents and substrates, on the morphology of the resulting porous microstructure are investigated. Experiments are performed to verify the results predicted by the simulations. This work lays out a comprehensive guide for designing PIPS-derived porous microstructures and offers practical engineering strategies for tailoring microstructure-level topology and size of pores for application-specific needs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Skyrmion-skyrmionium phase separation and laning transitions via spin-orbit torque currents

Many driven binary systems can exhibit laning transitions when the two species have different mobilities, such as colloidal particles with opposite charges in electric fields. Another example is pedestrian or active-matter systems, where particles moving in opposite directions form a phase-separated state that enhances the overall mobility. In this work, we use atomistic simulations to demonstrate that mixtures of skyrmions and skyrmioniums also exhibit pattern formation and laning transitions. Skyrmions move more slowly and at a finite skyrmion Hall angle compared to skyrmioniums, which move faster and without a skyrmion Hall effect. At low drives, the system forms a partially jammed phase where the skyrmioniums are dragged by the surrounding skyrmions, resulting in a finite angle of motion for the skyrmioniums. At higher drives, the system transitions into a laned state, but unlike colloidal systems, the lanes in the skyrmion-skyrmionium mixture are tilted relative to the driving direction due to the intrinsic skyrmion Hall angle. In the laned state, the skyrmionium angle of motion is reversed when it aligns with the tilted lane structure. At even higher drives, the skyrmioniums collapse into skyrmions. Below a critical skyrmion density, both textures can move independently with few collisions, but above this density, the laning state disappears entirely, and the system transitions to a skyrmion-only state. We map out the velocity and Hall responses of the different textures and identify three distinct phases: partially jammed, laned, and skyrmion-only moving crystal states. In conclusion, we compare our results to recent observations of tilted laning phases in pedestrian flows, where chiral symmetry breaking in the particle interactions leads to similar behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Investigation of porous polydimethylsiloxane structures with tunable properties induced by the phase separation technique

This article reports the fabrication and characterization of porous polydimethylsiloxane (PDMS) structures developed by the solvent evaporationinduced phase separation technique. Here, ternary systems containing water/ tetrahydrofuran (THF)/PDMS with various concentrations are produced to form a stable solution. The porous PDMS structures are formed by removing the solvent (THF) and nonsolvent (water) phases during the stepping heat treatment procedure. The analytical ternary phase diagram is constructed based on the thermodynamic equilibrium state in the polymer solution to explain the stable/unstable formulations and the possible composition change path. The results show that the isolated pores with the adjustable pore size ranging from 330 to 1900 μm are obtained by tuning the water to the THF ratio. The mechanical properties of the porous PDMS structures are determined by conducting the tensile tests on the prepared dog bone-shaped specimens. A wide range of elastic modulus ranging between 0.49 and 1.05 MPa was achieved without affecting the density of the porous sample by adjusting the solvent and non-solvent content in the solution. It is shown that the flexibility of the porous structures can be improved by reducing the ratio of water to THF and decreasing the PDMS content. The porosity measurements reveal that the PDMS concentration is the major phase controlling the porosity of the structure, while the effect of water/THF is negligible.

42 ENGINEERING↗
DOE OSTI2023

Deposition-controlled phase separation in CuNb metallic alloys

Vapor co-deposited metal nanocomposites with immiscible components have shown to have several superior properties including mechanical performance, radiation tolerance, and enhanced functionalities. The morphology and structural design of these nanocomposites are important in determining the expression of these properties. The conditions used to deposit thin film nanocomposites are the governing factors in determining the final nanostructure. In this work, we link the effects of process gas pressure, substrate temperature, and sputtering target power on resultant Cu/Nb thin film nanostructures. Here, we find that for films with equiatomic phase fractions of Cu and Nb, inhomogeneous precipitate segregation dominated the structure at lower substrate temperature depositions while higher temperatures distributed the Cu and Nb phases more uniformly. Increasing process gas pressure during deposition lead to a spatially homogeneous, nanocrystalline structure of Cu/Nb. In situ annealing of this sample shows that the phase separated morphology of the two immiscible materials depends on the initial composition. Finally, compositions of Cu and Nb that were highly disparate lead to interface segregation of the minority phase. The morphological evolution observed in the Cu/Nb system is compatible with modified structural zone models for immiscible thin film systems.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Non-Solvent Induced Phase Separation Enables Designer Redox Flow Battery Electrodes

Porous carbonaceous electrodes are performance-defining components in redox flow batteries (RFBs), where their properties impact the efficiency, cost, and durability of the system. The overarching challenge is to simultaneously fulfill multiple seemingly contradictory requirements—i.e., high surface area, low pressure drop, and facile mass transport—without sacrificing scalability or manufacturability. Here, non-solvent induced phase separation (NIPS) is proposed as a versatile method to synthesize tunable porous structures suitable for use as RFB electrodes. The variation of the relative concentration of scaffold-forming polyacrylonitrile to pore-forming poly(vinylpyrrolidone) is demonstrated to result in electrodes with distinct microstructure and porosity. Tomographic microscopy, porosimetry, and spectroscopy are used to characterize the 3D structure and surface chemistry. Flow cell studies with two common redox species (i.e., all-vanadium and Fe2+/3+) reveal that the novel electrodes can outperform traditional carbon fiber electrodes. It is posited that the bimodal porous structure, with interconnected large (>50 µm) macrovoids in the through-plane direction and smaller (<5 µm) pores throughout, provides a favorable balance between offsetting traits. Although nascent, the NIPS synthesis approach has the potential to serve as a technology platform for the development of porous electrodes specifically designed to enable electrochemical flow technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Rapid macrovoid characterization in membranes prepared via nonsolvent-induced phase separation: A comparison between 2D and 3D techniques

Optimizing the performance of asymmetric membranes prepared via nonsolvent-induced phase separation (NIPS) requires a quantitative understanding of how processing variables influence membrane morphology. Presently, the most useful structural quantification techniques require 3D visualization of the membrane structure and are best suited for studies seeking detailed information on small datasets. This study proposes and validates a rapid and accurate technique for quantifying macroporosity (i.e., D m ), a simple descriptor of sublayer macrovoid content in asymmetric membranes D m . values measured from segmented cross-sectional imaging performed via X-ray computed tomography (XCT) and scanning electron microscopy (SEM) are presented and compared for three asymmetric membranes prepared from commercial polymers. Importantly, analyses of 3D XCT membrane reconstructions reveal that D m is described by a single, centralized mean, which demonstrates that macrovoid content is spatially homogenous. Thus, D m can be approximated from limited sampling of the 2D cross-sectional membrane structure via SEM. A proposed 2D SEM sampling method provides D m estimates within ±6% of corresponding 3D XCT values with 30 independent measurements for the three membranes. Further sensitivity is achieved using complementary descriptors such as macrovoid count density (i.e., C m ). This technique is thus a useful tool for characterizing macroporosity from a broad selection of membrane samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1996

Growth and Morphology of Phase Separating Supercritical Fluids

The scientific objective is to study the relation between the morphology and the growth kinetics of domains during phase separation. We know from previous experiments performed near the critical point of pure fluids and binary liquids that there are two simple growth laws at late times. The 'fast' growth appears when the volumes of the phases are nearly equal and the droplet pattern is interconnected. In this case the size of the droplets grows linearly in time. The 'slow' growth appears when the pattern of droplets embedded in the majority phase is disconnected. In this case the size of the droplets increases in proportion to time to the power 1/3. The volume fraction of the minority phase is a good candidate to determine this change of behavior. All previous attempts to vary the volume fraction in a single experimental cell have failed because of the extreme experimental difficulties.

Hegseth, John↗
DOE OSTI2023

Engineering Redox Flow Battery Electrodes with Spatially Varying Porosity Using Non‐Solvent‐Induced Phase Separation

Redox flow batteries (RFBs) are a promising electrochemical platform for efficiently and reliably delivering electricity to the grid. Within the RFB, porous carbonaceous electrodes facilitate electrochemical reactions and distribute the flowing electrolyte. Tailoring electrode microstructure and surface area can improve RFB performance, lowering costs. Electrodes with spatially varying porosity may increase electrode utilization and provide surface area in reaction‐limited zones; however, the efficacy of such designs remains an open area of research. Herein, a non‐solvent‐induced phase‐separation (NIPS) technique that enables the reproducible synthesis of macrovoid‐free electrodes with well‐defined across‐thickness porosity gradients is described. The monotonically varying porosity profile is quantified and the physical properties and surface chemistries of porosity‐gradient electrodes are compared with macrovoid‐containing electrode, also synthesized by NIPS. Then, the electrochemical and fluid dynamic performance of the porosity‐gradient electrodes is evaluated, exploring the effect of changing the direction of the porosity gradient and benchmarking against the macrovoid‐containing electrode. Lastly, the performance is examined in a vanadium RFB, finding that the porosity‐gradient electrode outperforms the macrovoid electrode, is independent of gradient direction, and performs favorably compared to advanced electrodes in the contemporary literature. It is anticipated that the approach motivates further exploration of microstructurally tailored electrodes in electrochemical systems.

25 ENERGY STORAGE↗
DOE OSTI2021

Self-Assembly and Phase Separation for Transport: A brief argument for the continued exploration of liquid crystal flows and electrodeposition in micro-gravity

Phase separation, interfacial tension gradients, and molecular self-assembly are all phenomena frequently observed when manipulating soft condensed matter systems on Earth. Depending on the system these processes can also be quite predictable. For instance, on Earth water droplets placed on hydrophobic surfaces will have contact angles > 90° with limited spread, contrary to their wetting behavior on hydrophilic surfaces. However, in an environment that is in a constant state of free-fall, where the gravitational field is reduced by 10%, such as on the International Space Station (ISS), buoyancy and its effect on fluid convection also become negligible. Fluid flow and phase behavior become less predictable. Thus, continuing the prior example, even if water droplets still remain in contact with a surface in microgravity (µg), the interface between the air and droplets will still remain significantly curved, appearing almost as if they were placed over completely nonwetting surfaces (Fig. 1a). Moreover, the negligible opposing buoyant force would also mean that if immiscible liquid droplets of a less dense character, or air bubbles even (Fig. 1b), were to be suspended within a larger water drop, these immiscible droplets or air bubbles would not migrate toward any one direction unless either artificially propelled by an external force or internal reaction inducing flow.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Automated and High-Throughput Phase Separation Control for Supramolecular Polymer Blends Enabled by Machine Learning

Supramolecular polymer blends (SPBs) offer tunable morphologies that dictate their macroscopic properties, yet their rational design is limited by the absence of predictive structure−morphology models. Here, we introduce a data-driven highthroughput workflow that integrates modular polymer synthesis, robotic formulation, automated morphology characterization, and machine learning (ML) for accelerated SPB discovery. Using a plug-and-play synthetic strategy, 33 hydrogen-bonding endfunctional homopolymers were prepared and orthogonally combined to generate 260 SPBs in 1 day. A fully automated atomic force microscopy (AFM) pipeline enabled systematic imaging, producing 2340 morphology data sets with minimal human intervention. Domain spacings were extracted through complementary imageprocessing methods and used to train ML models. A support vector regression (SVR) model accurately predicted target phase-separation sizes (50, 100, and 150 nm), which were experimentally validated. This work demonstrates the power of coupling high-throughput experimentation with ML to accelerate morphology discovery and provides one of the first large-scale experimental data sets for supramolecular polymer systems.

ML-guided polymer design↗