Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PM2.5”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Quantifying PM2.5-Meteorology Sensitivities in a Global Climate Model

Climate change can influence fine particulate matter concentrations (PM2.5) through changes in air pollution meteorology. Knowledge of the extent to which climate change can exacerbate or alleviate air pollution in the future is needed for robust climate and air pollution policy decision-making. To examine the influence of climate on PM2.5, we use the Geophysical Fluid Dynamics Laboratory Coupled Model version 3 (GFDL CM3), a fully-coupled chemistry-climate model, combined with future emissions and concentrations provided by the four Representative Concentration Pathways (RCPs). For each of the RCPs, we conduct future simulations in which emissions of aerosols and their precursors are held at 2005 levels while other climate forcing agents evolve in time, such that only climate (and thus meteorology) can influence PM2.5 surface concentrations. We find a small increase in global, annual mean PM2.5 of about 0.21 micro-g/cu m3 (5%) for RCP8.5, a scenario with maximum warming. Changes in global mean PM2.5 are at a maximum in the fall and are mainly controlled by sulfate followed by organic aerosol with minimal influence of black carbon. RCP2.6 is the only scenario that projects a decrease in global PM2.5 with future climate changes, albeit only by -0.06 micro-g/cu m (1.5%) by the end of the 21st century. Regional and local changes in PM2.5 are larger, reaching upwards of 2 micro-g/cu m for polluted (eastern China) and dusty (western Africa) locations on an annually averaged basis in RCP8.5. Using multiple linear regression, we find that future PM2.5 concentrations are most sensitive to local temperature, followed by surface wind and precipitation. PM2.5 concentrations are robustly positively associated with temperature, while negatively related with precipitation and wind speed. Present-day (2006-2015) modeled sensitivities of PM2.5 to meteorological variables are evaluated against observations and found to agree reasonably well with observed sensitivities (within 10e50% over the eastern United States for several variables), although the modeled PM2.5 is less sensitive to precipitation than in the observations due to weaker convective scavenging. We conclude that the hypothesized "climate penalty" of future increases in PM2.5 is relatively minor on a global scale compared to the influence of emissions on PM2.5 concentrations.

PM2.5↗

Satellite-Assisted Particulate Matter (SAPM) for the Models, In situ, and Remote sensing of Aerosols (MIRA) Working Group

Models, In situ, and Remote sensing of Aerosols (MIRA) is an international working group that aims to foster collaborations amongst these three major aerosol specialties. It consists of a collection of interdisciplinary and independently funded projects/topics with clearly-defined goals. Currently there are four MIRA topic areas, including Satellite-Assisted Particulate Matter (SAPM), which is focused specifically on fine particulate matter (PM2.5). The study of PM2.5 is important due to its significant contribution to air pollution and resultant, adverse human health effects. The goal of the SAPM topic group is to conduct and provide intercomparisons of various methods and techniques to obtain surface PM2.5 estimates assisted by satellite remote sensors, global aerosol models, and in situ aerosol measurements. Some benefits of space-based/model-assisted PM2.5 retrievals include providing PM2.5 approximations in regions with poor in situ ground station coverage and a means for assessing spatial/temporal PM2.5 variations on regional and/or global scales. Furthermore, benefits of spaceborne lidar/model-assisted PM2.5 retrievals include providing nighttime PM2.5 estimates and characterization of near-surface aerosol vertical structure. SAPM is seeking international datasets of mass scattering/absorption coefficient and aerosol hygroscopic properties for different aerosol species, as well as ground-based in situ PM2.5 measurements. In this poster presentation, we give an overview of SAPM, and show results from three recent/ongoing PM2.5 studies. These efforts involve deriving surface PM2.5 concentrations from two spaceborne lidars, the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) and Cloud-Aerosol Transport System (CATS), and investigating key variables that impact the estimation of PM2.5 from model simulated aerosol optical depth (AOD) using the Goddard Earth Observing System (GEOS) model.

Travis D. Toth↗

Historical and Future Changes in Air Pollutants from CMIP6 Models

Poor air quality is currently responsible for large impacts on human health across the world. In addition, the air pollutants ozone (O3) and particulate matter less than 2.5 µm in diameter (PM2.5) are also radiatively active in the atmosphere and can influence Earth's climate. It is important to understand the effect of air quality and climate mitigation measures over the historical period and in different future scenarios to ascertain any impacts from air pollutants on both climate and human health. The Coupled Model Intercomparison Project Phase 6 (CMIP6) presents an opportunity to analyse the change in air pollutants simulated by the current generation of climate and Earth system models that include a representation of chemistry and aerosols (particulate matter). The shared socio-economic pathways (SSPs) used within CMIP6 encompass a wide range of trajectories in precursor emissions and climate change, allowing for an improved analysis of future changes to air pollutants. Firstly, we conduct an evaluation of the available CMIP6 models against surface observations of O3 and PM2.5. CMIP6 models consistently overestimate observed surface O3 concentrations across most regions and in most seasons by up to 16 ppb, with a large diversity in simulated values over Northern Hemisphere continental regions. Conversely, observed surface PM2.5 concentrations are consistently underestimated in CMIP6 models by up to 10 µg m−3, particularly for the Northern Hemisphere winter months, with the largest model diversity near natural emission source regions. The biases in CMIP6 models when compared to observations of O3 and PM2.5 are similar to those found in previous studies. Over the historical period (1850–2014) large increases in both surface O3 and PM2.5 are simulated by the CMIP6 models across all regions, particularly over the mid to late 20th century, when anthropogenic emissions increase markedly. Large regional historical changes are simulated for both pollutants across East and South Asia with an annual mean increase of up to 40 ppb for O3 and 12 µg m−3 for PM2.5. In future scenarios containing strong air quality and climate mitigation measures (ssp126), annual mean concentrations of air pollutants are substantially reduced across all regions by up to 15 ppb for O3 and 12 µg m−3 for PM2.5. However, for scenarios that encompass weak action on mitigating climate and reducing air pollutant emissions (ssp370), annual mean increases in both surface O3 (up 10 ppb) and PM2.5 (up to 8 µg m−3) are simulated across most regions, although, for regions like North America and Europe small reductions in PM2.5 are simulated due to the regional reduction in precursor emissions in this scenario. A comparison of simulated regional changes in both surface O3 and PM2.5 from individual CMIP6 models highlights important regional differences due to the simulated interaction of aerosols, chemistry, climate and natural emission sources within models. The projection of regional air pollutant concentrations from the latest climate and Earth system models used within CMIP6 shows that the particular future trajectory of climate and air quality mitigation measures could have important consequences for regional air quality, human health and near-term climate. Differences between individual models emphasise the importance of understanding how future Earth system feedbacks influence natural emission sources, e.g. response of biogenic emissions under climate change.

Air pollutants↗

Future Fire Impacts on Smoke Concentrations, Visibility, and Health in the Contiguous United States

Fine particulate matter (PM2.5) from U.S. anthropogenic sources is decreasing. However, previous studies have predicted that PM2.5 emissions from wildfires will increase in the midcentury to next century, potentially offsetting improvements gained by continued reductions in anthropogenic emissions. Therefore, some regions could experience worse air quality, degraded visibility, and increases in population-level exposure. We use global climate model simulations to estimate the impacts of changing fire emissions on air quality, visibility, and premature deaths in the middle and late 21st century. We find that PM2.5 concentrations will decrease overall in the contiguous United States (CONUS) due to decreasing anthropogenic emissions (total PM2.5 decreases by 3% in Representative Concentration Pathway [RCP] 8.5 and 34% in RCP4.5 by 2100), but increasing fire-related PM2.5 (fire-related PM2.5 increases by 55% in RCP4.5 and 190% in RCP8.5 by 2100) offsets these benefits and causes increases in total PM2.5 in some regions. We predict that the average visibility will improve across the CONUS, but fire-related PM2.5 will reduce visibility on the worst days in western and southeastern U.S. regions. We estimate that the number of deaths attributable to total PM2.5 will decrease in both the RCP4.5 and RCP8.5 scenarios (from 6% to 4–5%), but the absolute number of premature deaths attributable to fire-related PM2.5 will double compared to early 21st century. We provide the first estimates of future smoke health and visibility impacts using a prognostic land-fire model. Our results suggest the importance of using realistic fire emissions in future air quality projections.

54 ENVIRONMENTAL SCIENCES↗

Methods for Characterizing Fine Particulate Matter Using Satellite Remote-Sensing Data and Ground Observations: Potential Use for Environmental Public Health Surveillance

This study describes and demonstrates different techniques for surfacing daily environmental / hazards data of particulate matter with aerodynamic diameter less than or equal to 2.5 micrometers (PM2.5) for the purpose of integrating respiratory health and environmental data for the Centers for Disease Control and Prevention (CDC s) pilot study of Health and Environment Linked for Information Exchange (HELIX)-Atlanta. It described a methodology for estimating ground-level continuous PM2.5 concentrations using B-Spline and inverse distance weighting (IDW) surfacing techniques and leveraging National Aeronautics and Space Administration (NASA) Moderate Resolution Imaging Spectrometer (MODIS) data to complement The Environmental Protection Agency (EPA) ground observation data. The study used measurements of ambient PM2.5 from the EPA database for the year 2003 as well as PM2.5 estimates derived from NASA s satellite data. Hazard data have been processed to derive the surrogate exposure PM2.5 estimates. The paper has shown that merging MODIS remote sensing data with surface observations of PM2.5 not only provides a more complete daily representation of PM2.5 than either data set alone would allow, but it also reduces the errors in the PM2.5 estimated surfaces. The results of this paper have shown that the daily IDW PM2.5 surfaces had smaller errors, with respect to observations, than those of the B-Spline surfaces in the year studied. However the IDW mean annual composite surface had more numerical artifacts, which could be due to the interpolating nature of the IDW that assumes that the maxima and minima can occur only at the observation points. Finally, the methods discussed in this paper improve temporal and spatial resolutions and establish a foundation for environmental public health linkage and association studies for which determining the concentrations of an environmental hazard such as PM2.5 with good accuracy levels is critical.

Al-Hamdan, Mohammad Z.↗

Developing Satellite-Assisted Particulate Matter (SAPM) Estimates over India for the MIRA Working Group

The Models, In Situ, and Remote Sensing of Aerosols (MIRA) Working Group is an international collective that encourages collaboration among researchers from these three atmospheric aerosol communities. MIRA currently comprises five interdisciplinary and independently funded Topic Groups, each with specific goals, and involves requests for additional scientific datasets. The Satellite-Assisted Particulate Matter (SAPM) Topic Group, as part of MIRA, focuses on studying particulate matter smaller than 2.5 microns in diameter (PM2.5) due to its significant contribution to air pollution and its harmful effects on human health. While the annual mean PM2.5 levels are typically low (~5-15 μg/m³) across most of the contiguous United States (CONUS), other countries experience much higher concentrations (e.g., India). SAPM aims to compare different methods and techniques for obtaining surface PM2.5 proxies using spaceborne passive and active remote sensors, aerosol models, and in situ measurements. Ultimately, SAPM aims to provide more extensive coverage of PM2.5 concentrations than what is currently available from in situ ground stations, which are limited in some parts of the CONUS and large regions worldwide. Current SAPM members are exploring PM2.5 estimation techniques using active sensors. This presentation offers an overview of these techniques and highlights the strengths and limitations of each approach. These techniques include 1) spaceborne lidar (CALIOP: Cloud-Aerosol Lidar with Orthogonal Polarization) alone, and 2) a combination of spaceborne lidar (CATS: Cloud Aerosol Transport System) and a global aerosol transport model (GEOS: Goddard Earth Observing System). Additionally, we present a case study featuring our SAPM research in India, a country with high levels of PM2.5 concentrations (i.e., state-level annual means of ~100-200 μg/m³). Consistent spatial patterns in PM2.5 over India are found from the in situ data, CALIOP-based, and CATS/model-based methods, with the highest concentrations found in northern India near New Delhi. The gridded PM2.5 analysis yields high R values between in situ and CATS/model (~0.7) and between in situ and CALIOP nighttime (~0.9), as well as good agreement between CATS/model and CALIOP nighttime PM2.5 estimates (R = ~0.8 and slope = ~0.9). For current and future efforts, the SAPM Topic Group is actively seeking new collaborators, especially those working with in situ aerosol measurements, and is interested in acquiring additional aerosol datasets to improve and validate the PM2.5 proxies.

Travis D Toth↗

Temporal and Spatial Variations in Fine and Coarse Particles in Seoul, Korea

Concentrations of fine (PM2.5) and coarse particles (PM10 -2.5), whose diameters are less 2.5 µm, and between 2.5 and 10 µm, respectively, at ambient air monitoring stations in Seoul between 2002 and 2008 were analyzed. Effects of Asian dust are mainly manifested as concentration spikes of PM10 - 2.5 but were considerable on PM2.5 levels in 2002 when Asian dust storms were the strongest. Excluding the effects of Asian dust, annual average PM2.5 showed a downward trend. Despite a similarity in year - to - year variations, PM10- 2.5, mostly affected by fugitive dust emissions, and CO and NO2, primarily affected by motor vehicle emissions, did not show a decrease. PM2.5 along with CO and NO2 had the highest values during the morning rush hour. PM10 - 2.5 peak lagged about one hour behind that of PM2.5 because of fugitive dust emissions despite an increasing mixing height. On high PM2.5 days, PM2. 5 peaks occurred two hours later than usual as the effects of secondary formation became more important. A test for the spatial variabilities shows that PM10 - 2.5, which is known to be greatly influenced by local effects, is lower in its correlation coeffic ient and higher in its coefficient of divergence (COD, which serves as an indicator for spatial variability) than PM2.5, albeit that the difference between the two is small. The average COD of PM2.5 among monitoring stations was about 0.2 but was lowered t o 0.13 when considering high PM2.5 days only, which signifies that spatial uniformity increases significantly.

Fugitive dust↗

Air Pollution Scenario over Pakistan: Characterization and Ranking of Extremely Polluted Cities using Long-Term Concentrations of Aerosols and Trace Gases

Pakistan ranks third in the world in terms of mortality attributable to air pollution, with aerosol mass concentrations (PM2.5) consistently well above WHO (World Health Organization) air quality guidelines (AQG). However, regulation is dependent on a sparse network of air quality monitoring stations and insufficient ground data. This study utilizes long-term observations of aerosols and trace gases to characterize and rank the air pollution scenarios and pollution characteristics of 80 selected cities in Pakistan. Datasets used include (1) the Aqua and Terra (AquaTerra) MODIS (Moderate Resolution Imaging Spectroradiometer) Level 2 Collection 6.1 merged Dark Target and Deep Blue (DTB) aerosol optical depth (AOD) retrieval products; (2) the CAMS (Copernicus Atmosphere Monitoring Service) reanalysis PM1, PM2.5, and PM10 data; (3) the MERRA-2 (Modern-Era Retrospective analysis for Research and Applications, Version 2) reanalysis PM2.5 data, (4) the OMI (Ozone Monitoring Instrument) tropospheric vertical column density (TVCD) of nitrogen dioxide (NO2), and VCD of sulfur dioxide (SO2) in the Planetary Boundary Layer (PBL), (5) the VIIRS (Visible Infrared Imaging Radiometer Suite) Nighttime Lights data, (6) MODIS Collection 6 Version 2 global monthly fire location data (MCD14ML), (7) population density, (8) MODIS Level 3 Collection 6 land cover types, (9) AERONET (AErosol RObotic NETwork) Version 3 Level 2.0 data, and (10) ground-based PM2.5 concentrations from air quality monitoring stations. Potential Source Contribution Function (PSCF) analyses were performed by integrating with ground-based PM2.5 concentrations and the NOAA (National Oceanic and Atmospheric Administration) HYSPLIT (Hybrid Single-Particle Lagrangian Integrated Trajectory) air parcel back trajectories to identify potential pollution source areas which are responsible for extreme air pollution in Pakistan. Results show that the ranking of the top polluted cities depends on the type of pollutant considered and the metric used. For example, Jhang, Multan, and Vehari were characterized as the top three polluted cities in Pakistan when considering AquaTerra DTB AOD products; for PM1, PM2.5, and PM10 Lahore, Gujranwala, and Okara were the top three; for tropospheric NO2 VCD Lahore, Rawalpindi, and Islamabad and for PBL SO2 VCD Lahore, Mirpur, and Gujranwala. The results demonstrate that Pakistan’s entire population has been exposed to high PM2.5 concentrations for many years, with a mean annual value of 54.7 μg/cu. m, over all Pakistan from 2003 to 2020. This value exceeds Pakistan’s National Environmental Quality Standards (Pak-NEQS, i.e., <15 μg/cu. m annual mean) for ambient air defined by the Pakistan Environmental Protection Agency (Pak-EPA) as well as the WHO Interim Target-1 (i.e., mean annual PM2.5 <35 μg/cu. m). The spatial analyses of the concentrations of aerosols and trace gases in terms of population density, nighttime lights, land cover types, and fire location data, and the PSCF analysis indicate that Pakistan’s air quality is strongly affected by anthropogenic sources inside of Pakistan, with contributions from surrounding countries. Statistically significant positive (increasing) trends in PM1, PM2.5, PM10, tropospheric NO2 VCD, and SO2 VCD were observed in ~89%, ~67%, ~48%, 91%, and ~88% of the Pakistani cities (80 cities), respectively. This comprehensive analysis of aerosol and trace gas levels, their characteristics in spatio-temporal domains, and their trends over Pakistan, is the first of its kind. Results will be helpful to the Ministry of Climate Change (Government of Pakistan), Pak-EPA, SUPARCO (Pakistan Space and Upper Atmosphere Research Commission), policymakers, and the local research community to mitigate air pollution and its effects on human health.

Muhammad Bilal↗

Providing Satellite-Assisted Particulate Matter (SAPM) Estimates for the Models, In situ, and Remote sensing of Aerosols (MIRA) Working Group

The Models, In situ, and Remote sensing of Aerosols (MIRA) Working Group is an international forum that promotes collaboration amongst researchers of these three atmospheric aerosol communities. MIRA currently consists of a collection of five interdisciplinary and independently funded Topic groups with focused goals and generally involve requests for additional scientific datasets. Participants of the MIRA Satellite-Assisted Particulate Matter (SAPM) Topic group study particulate matter with diameters smaller than 2.5 microns (PM2.5), because of its substantial role in air pollution and the resulting negative impacts on human health. SAPM seeks to provide intercomparisons of different methods and techniques for obtaining surface PM2.5 proxies using spaceborne passive and active remote sensors, aerosol models, and in situ observations. The ultimate motivation of SAPM is to provide greater PM2.5 coverage than in situ ground stations, which are limited in some areas of the contiguous United States and large regions throughout the globe. In this poster presentation, we provide an overview of the PM2.5 estimation techniques applied by current SAPM team members, as well as the strengths and limitations of each technique. These approaches include spaceborne lidar (Cloud-Aerosol Lidar with Orthogonal Polarization) only, combined spaceborne lidar (Cloud Aerosol Transport System) and a model (Goddard Earth Observing System), and using aerosol optical depth (AOD) from a spaceborne passive remote sensor (Moderate Resolution Imaging Spectroradiometer) to explore city trends in AOD and relate those to city trends in PM2.5. Also in this poster presentation, we highlight results of our SAPM study of India, a country characterized by high levels of PM2.5 concentrations. We show the temporal and spatial variability of PM2.5 over India derived using various approaches and validation with ground-based in situ PM2.5 observations. The SAPM Topic group actively seeks additional collaborators, including those working with in situ aerosol measurements, and is interested in aerosol datasets to improve and/or validate the PM2.5 estimates.

Travis D Toth↗

Recent intensification of winter haze in China linked to foreign emissions and meteorology

Wintertime aerosol pollution in Northern China has increased over the past several decades as anthropogenic emissions in China have increased, and has increased dramatically since the beginning of the 21st century, but the causes and their quantitative contributions remain uncertain. Here we use an aerosol source tagging capability implemented in a global aerosol-climate model to assess long-term trends of PM2.5 (particulate matter less than 2.5 µm in diameter) in Northern China. Our analysis suggests that increasing PM2.5 concentrations due to local emission increases within China were obscured (~13%) by foreign emission reductions between 1980–2000. As foreign emissions stabilized during 2000-2014, their counteracting effect almost disappeared, uncovering China’s pollution potential from domestic emission increases. The meteorology dominated PM2.5 trend during 1990–1996 and also uncovered the pollution potential due to decadal variations in winds. The stabilized foreign emissions together with changing meteorology explain a quarter of the larger increasing trend of PM2.5 since the beginning of the 21st century. Future foreign emissions are not expected to help hiding China’s pollution, reductions in local emissions are the efficient way to improve future air quality in Northern China.

Yang, Yang↗

Simulations of Sulfate-Nitrate-Ammonium (SNA) aerosols during the extreme haze events over Northern China in 2014

Extreme haze events have occurred frequently over China in recent years. Although many studies have investigated the formation mechanisms associated with PM2.5 for heavily polluted regions in China based on observational data, adequately predicting peak PM2.5 concentrations is still challenging for regional air quality models. In this study, we evaluate the performance of one configuration of the Weather Research and Forecasting model coupled with chemistry (WRF-Chem) and use the model to investigate the sensitivity of heterogeneous reactions on simulated peak sulfate, nitrate, and ammonium concentrations in the vicinity of Beijing during four extreme haze episodes in October 2014 over the North China Plain. The highest observed PM2.5 concentration of 469 μg m-3 occurred in Beijing. Comparisons with observations show that the model reproduced the temporal variability in PM2.5 with the highest PM2.5 values on polluted days (defined as days in which observed PM2.5 is greater than 75 μg m-3), but predictions of sulfate, nitrate, and ammonium were too low on days with the highest observed concentrations. Observational data indicate that the sulfur/nitric oxidation rates are strongly correlated with relative humidity during periods of peak PM2.5; however, the model failed to reproduce the highest PM2.5 concentrations due to missing heterogeneous reactions. As the parameterizations of those reactions is not well established yet, estimates of SO2-to-H2SO4 and NO2/NO3-to-HNO3 reaction rates that depend on relative humidity were applied which improved the simulation of sulfate, nitrate, and ammonium enhancement on polluted days in terms of both concentrations and partitioning among those species. Sensitivity simulations showed that the extremely high heterogeneous reaction rates and also higher emission rates than those reported in the emission inventory

Chen, Dan↗

TPSAS-NF1676L-35847-DND

Aerosols, especially particulate matter with aerodynamic diameters smaller than 2.5 ?m (PM2.5), contribute to air pollution and negatively impact human health. Past studies have estimated PM2.5 concentrations through the use of aerosol optical thickness (AOT) datasets from passive satellite sensors like MODIS and MISR. However, a major limitation of using passive AOTs for PM2.5 applications is that they are column-integrated, while PM2.5 is a surface measurement. In this study, we employ a bulk-mass-modeling-based method to directly derive PM2.5 concentrations over the contiguous United States (CONUS) using two years (2008-2009) of daytime and nighttime near-surface aerosol extinction retrievals from the NASA Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) instrument, bulk mass extinction efficiencies, and model-based hygroscopicity. Results reveal that CALIOP-derived PM2.5 agrees reasonably well with ground-based PM2.5 observations from the U.S. Environmental Protection Agency (EPA), implying this method exhibits some merit in monitoring PM2.5 concentrations from CALIOP data. The newly developed method is then applied to CALIOP aerosol extinction retrievals using nearly the entire CALIOP data record (2007-2018), and an initial trend analysis is conducted. Results from various sensitivity studies are also shown, including those of surface layer height and assumed aerosol type.

Travis D Toth↗

Biochemical Conversion of Herbaceous Biomass to Renewable Diesel: Biorefinery Marginal Air Quality Impacts and Comparison to Feedstock Production

This study assesses the air quality impacts of an advanced biorefinery that produces renewable diesel blendstock (RDB) from lignocellulosic biomass via aerobic respiration (Davis et al. 2022) by estimating fine particulate matter (PM2.5) impacts from biorefinery emissions. It continues a prior analysis that used a geospatial assessment to identify source regions for biomass feedstocks and studied the impact of feedstock production emissions on air quality (Thind et al. 2022). Thind et al. (2022) identified RDB biorefineries that can use corn stover feedstocks of 2,000; 5,200; and 9,100 dry metric tons per day (DMT/day), based in Iowa, and suggested 7 unique counties can serve as hosts for a biorefinery that draws biomass feedstock from neighboring counties. Given 13 unique county-biorefinery size combinations and two waste lignin end uses at the biorefinery (lignin as a fuel for electricity generation and lignin for pellet production), the air-quality-related sustainability aspects of each of these 26 scenarios are assessed by estimating the annual average impacts of biorefinery emissions on the dispersion and formation of secondary PM2.5 in the atmosphere using a novel reduced-complexity air quality model called the Intervention Model for Air Pollution (InMAP). The 26 biorefinery design combinations help capture how a biorefinery's emissions of air pollutants and their resulting impact on local and regional air quality are influenced by the magnitude of production scale, lignin utilization strategy, and location of a proposed biorefinery. Methods developed in Thind et al. (2022) are applied to estimate the constraints on primary PM2.5 and secondary PM2.5 precursor emissions based on compliance with U.S. Environmental Protection Agency's (EPA's) annual primary National Ambient Air Quality Standard (NAAQS) of PM2.5 (i.e.12.0 micrograms per cubic meter (microgram/m3)) at downwind receptors of a biorefinery. Incremental PM2.5 concentrations caused by the emission of biorefining corn stover into RDB are assessed and compared to those of corn stover production. To illuminate which upstream supply chain stage of renewable diesel production contributes most to air quality impacts, marginal PM2.5 concentrations are compared between both stages at multiple downwind air quality monitor locations. In addition, through a hotspot analysis, we identify the primary contributing factors of emissions within the feedstock production and biorefinery stage operations. In doing so, we provide insights for improving the air pollutant emission-related sustainability of advanced lignocellulosic biofuel production.

09 BIOMASS FUELS↗

Retrieving Particulate Matter Concentrations over the Contiguous United States Using CALIOP Observations

Using twelve years (2007-2018) of NASA Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) near-surface 532 nm aerosol extinction retrievals, multi-year mean and trends of particulate matter (PM) concentrations are derived over the contiguous United States (CONUS). Different from past studies that use column integrated aerosol optical thickness, here only near-surface CALIOP aerosol extinction is used for deriving near-surface PM with aerodynamic diameters less than 2.5 µm (PM2.5) concentrations using an innovative, bulk-mass-modeling-based method. Compared against ground based PM2.5 measurements from the U.S. Environmental Protection Agency (EPA), an encouraging relationship between CALIOP-derived PM2.5 and EPA-observed PM2.5 (Deming slope = 0.89; RMSE = 3.42 µg/m3; mean bias = -1.00 µg/m3) is found using combined daytime/nighttime CALIOP data. Also, comparable trends in PM2.5 concentrations from the EPA and daytime and nighttime CALIOP data are found for most of the eastern CONUS and imply that air quality is generally improving over this region for the study period. Over the western CONUS, a seasonal analysis reveals that PM2.5 trends are positive during the more active wildfire season (June through November) but negative for other months. This study suggests that lidar data show promise in their use for obtaining PM2.5 estimates and provides motivation to further explore aerosol extinction-based PM concentration retrievals in anticipation of future space-based lidar missions.

CALIOP↗

Modeling Air Pollutant Emissions in the Provincial Level Road Transportation Sector in Korea: A Case Study of the Zero-Emission Vehicle Subsidy

South Korea has been suffering from high PM2.5 pollution. Previous studies have contributed to establishing PM2.5 mitigation policies but have not considered provincial features and sector-interactions. In that sense, the integrated assessment model (IAM) could complement the shortcomings of previous studies. IAM, capable of analyzing PM2.5 pollution levels at the provincial level in Korea, however, has not been developed yet. Hence, this study (i) expands on IAM which can represent provincial-level spatial resolution in Korea (GCAM-Korea) with air pollutant emissions modeling which focuses on the road transportation sector and (ii) examines the zero-emission vehicles (ZEVs) subsidy policy’s effects on PM2.5 mitigation using the expanded GCAM-Korea. Simulation results show that PM2.5 emissions decrease by 0.6–4.1% compared to the baseline, and the Seoul metropolitan area contributes 38–44% to the overall PM2.5 emission reductions. As the ZEVs subsidy is weighted towards the light-duty vehicle 4-wheels (LDV4W) sector, various spillover effects are found: ZEVs’ share rises intensively in the LDV4W sector leading to an increase in its service costs, and at the same time, driving bus service costs to become relatively cheaper. This, in turn, drives an increase in bus service demand and emissions discharge. Furthermore, this type of impact of the ZEVs subsidy policy does not reduce internal combustion engine vehicles (ICEVs) in freight trucks, although diesel freight trucks are a major contributor to PM2.5 emissions and also to NOx.

Roh, Minyoung↗

Global Estimates and Long-Term Trends of Fine Particulate Matter Concentrations (1998-2018)

Exposure to outdoor fine particulate matter (PM2.5) is a leading risk factor for mortality. We develop global estimates of annual PM2.5 concentrations and trends for 1998–2018 using advances in satellite observations, chemical transport modeling, and ground-based monitoring. Aerosol optical depths (AODs) from advanced satellite products including finer resolution, increased global coverage, and improved long-term stability are combined and related to surface PM2.5 concentrations using geophysical relationships between surface PM2.5 and AOD simulated by the GEOS-Chem chemical transport model with updated algorithms. The resultant annual mean geophysical PM2.5 estimates are highly consistent with globally distributed ground monitors (R2 = 0.81; slope = 0.90). Geographically weighted regression is applied to the geophysical PM2.5 estimates to predict and account for the residual bias with PM2.5 monitors, yielding even higher cross validated agreement (R2 = 0.90–0.92; slope = 0.90–0.97) with ground monitors and improved agreement compared to all earlier global estimates. The consistent long-term satellite AOD and simulation enable trend assessment over a 21 year period, identifying significant trends for eastern North America (−0.28 ± 0.03 μg/m3/yr), Europe (−0.15 ± 0.03 μg/m3/yr), India (1.13 ± 0.15 μg/m3/yr), and globally (0.04 ± 0.02 μg/m3/yr). The positive trend (2.44 ± 0.44 μg/m3/yr) for India over 2005–2013 and the negative trend (−3.37 ± 0.38 μg/m3/yr) for China over 2011–2018 are remarkable, with implications for the health of billions of people.

Melanie S. Hammer↗

PM 2.5 Concentrations over Major Metropolitan Regions Inferred from Airborne High Spectral Resolution Lidar Measurements Using Machine Learning Regression

We use measurements of near-surface aerosol backscatter, extinction, and depolarization acquired by four NASA Langley Research Center airborne High Spectral Resolution Lidars (HSRLs) to develop a machine learning regression methodology to infer PM2.5 concentrations at the surface and aloft. These airborne HSRL measurements were acquired over major metropolitan regions in the United States and Asia during more than 170 flights since 2010. Hourly surface PM2.5 measurements from the EPA air quality system and similar networks in other countries acquired within 10 km and 15 minutes of these near-surface HSRL measurements are used to train models that compute PM2.5 concentrations from the HSRL measurements. We examine several regression methods and find that exponential Gaussian Process algorithms consistently give the best performance in terms of the lowest root-mean-square (RMS) errors and the highest correlations. Model performance varies significantly depending on various combinations of HSRL aerosol measurements (e.g., aerosol backscatter, extinction, depolarization, backscatter color ratios, lidar ratios, aerosol optical thickness) and retrievals (e.g., mixed layer height, aerosol type) used in the regressions. Models that use near-surface measurements of aerosol backscatter and aerosol intensive properties such as depolarization, backscatter color ratio, and lidar ratio typically give the best performance with RMS errors around 4 mg/m3 and correlation coefficients above 0.9. HSRL measurements were often acquired when the aircraft flew systematic “raster-scan” patterns for several hours over these cities. These flight patterns enabled measurements of the spatial, temporal, and vertical variabilities in the distributions of aerosol backscatter and aerosol intensive properties and allowed us to derive the corresponding variabilities in PM2.5 concentrations. We present examples of such variabilities over urban areas in the United States as well as Asia. We describe also how the distribution of surface PM2.5 varies with aerosol type and use these retrievals to examine model simulations of surface PM2.5 in these metropolitan regions. We also discuss how this methodology may be applied to measurements from satellite lidars such as CALIOP on CALIPSO and ATLID on EarthCARE.

lidar↗