Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA PRODUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Enhanced production of ECR plasma by using pulse mode microwaves on a large bore ECRIS with permanent magnets

In order to enhance the efficiency of an electron cyclotron resonance (ECR) plasma for a broad and dense ion beam source at low pressure, the magnetic field configuration is constructed by all permanent magnets. By using the pulse mode, we aim at the generation of plasma with parameters that cannot be achieved in the CW mode at microwave frequencies of 11-13GHz, under the constraint of the same average incident microwave powers. It is found that the total beam currents are increased by the pulse mode operation compared with the case of the CW mode. According to probe measurements of the ECR plasma, it is found that the electron density in the pulse mode is larger than that in the CW mode, while the electron temperatures in the pulse mode are lower than that in the CW mode. These results are discussed from the viewpoint of relaxation times obtained on plasma parameters and ECR efficiency. The cause of the beam current increment and operational windows spread due to the pulse mode are also discussed on these parameters suitable to production of molecular/cluster ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Emission characteristics and dynamics of the stagnation layer in colliding laser produced plasmas

The expansion dynamics of ion and neutral species in laterally colliding laser produced aluminum plasmas have been investigated using time and space resolved optical emission spectroscopies and spectrally and angularly resolved fast imaging. The emission results highlight a difference in neutral atom and ion distributions in the stagnation layer where, at a time delay of 80 ns, the neutral atoms are localized in the vicinity of the target surface (<1 mm from the target surface) while singly and doubly charged ions lie predominantly at larger distances, <1.5 and <2 mm, respectively. The imaging results show that the ions were found to form a well defined, but compressed, stagnation layer at the collision front between the two seed plasmas at early times ({Delta}t<80 ns). On the other hand, the excited neutrals were observed to form a V-shaped emission feature at the outer regions of the collision front with enhanced neutral emission in the less dense, cooler regions of the stagnation layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-Charge, Multi-MeV Electron Bunches Accelerated in Moderate Laser-Plasma Interaction Regime

Experiments, and simulations have shown that quasi-monoenergetic electron bunches can be accelerated from the background electron plasma population up to relativistic energies. Theoretical work indicated that with a proper choice of laser, plasma, and injection parameters the acceleration of electron bunches with small energy spread and short bunch length can occur in moderate intensity regime. Here we present the results of an experiment on electron acceleration carried out at the IPCF-CNR's Intense Laser Irradiation Laboratory in Pisa, within a wide national collaboration leaded by INFN named PLASMONX. High-charge, multi-MeV electron bunches were accelerated in moderated intensity regime by focusing the laser beam on a laminar gaseous target produced by a supersonic gas-jet. The laser-gas interaction was studied via interferometry, and Thomson scattering while the electron bunches were detected and characterised using a phosphor screen coupled with a magnetic spectrometer or a dosimetric detector. In some cases highly collimated electron bunches with moderate energy spread were observed, while the generation of high-charge, MeV energies electron bunches were obtained with high reproducibility for each gases tested.

43 PARTICLE ACCELERATORS↗

Radiofrequency conical emission from femtosecond filaments in air

We show that the broadband conical emission associated with filaments in air extends down to the radiofrequency region. This rf emission which originates from the longitudinal oscillation of charged ions formed during filamentation is strongly enhanced by the presence of a longitudinal static electric field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Application of microplasma discharge in a spark gap for high repetitive switching

The electrical breakdown in a spark gap for repetitive switching has been a long research interest. For this purpose, microplasma discharge is implemented in the spark gap which is further integrated inside a coaxial transmission line. This work addresses important physical properties and insights of the microplasma discharge, to be optimized, such as plasma generation in a spark channel, dielectric recovery process, and residual plasma in the postspark discharge period. Although understanding the microplasma discharge is the primary goal, considerable attention has been focused on an external circuit scheme to drive the discharge system at a high repetition rate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Extreme water state produced by underwater wire-array electrical explosion

The generation of an extreme water state (130 GPa, 5000 K, and 3.4 g/cm{sup 3}) which is characterized as dense plasma at the axis of a converging shock wave is reported. A 4 kJ pulse generator was used to explode a 40 Cu-wire array, generating a cylindrical shock wave. The measured shock wave trajectory and energy deposited into the water flow were used in hydrodynamic simulations coupled with the equation of state to determine the water parameters. The temperature estimated using the emission data of water in the vicinity of the implosion axis agrees with the simulation results, indicating shock wave symmetry in such extreme conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma diagnostics for investigating extreme ultraviolet light sources

Plasma temperature and density diagnostics are crucial for lithographic applications of extreme ultraviolet light sources. One widely used technique employs line intensity ratios of successively charged ion states to determine the ion temperature (T{sub ionz}). This work comprises a detailed ''stress-test'' of the applied technique, where space and time resolved emission in laser-produced plasmas were studied, using a Nd:yttrium aluminum garnet laser pulse incident on an aluminum target in the 26.5-32.5 nm range. Detailed hydrodynamic simulations also investigate the dependency of ion temperature on electron density and the charge states for various line combinations (Al VI/V, Al VII/VI, Al VIII/VII, Al IX/VIII, and Al X/IX).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modeling of the plasma generated in a rarefied hypersonic shock layer

In this study, a rigorous numerical model is developed to simulate the plasma generated in a rarefied, hypersonic shock layer. The model uses the direct simulation Monte Carlo (DSMC) method to treat the particle collisions and the particle-in-cell (PIC) method to simulate the plasma dynamics in a self-consistent manner. The model is applied to compute the flow along the stagnation streamline in front of a blunt body reentering the Earth's atmosphere at very high velocity. Results from the rigorous DSMC-PIC model are compared directly to the standard DSMC modeling approach that uses the ambipolar diffusion approximation to simulate the plasma dynamics. It is demonstrated that the self-consistent computation of the plasma dynamics using the rigorous DSMC-PIC model captures many physical phenomena not accurately predicted by the standard modeling approach. These computations represent the first assessment of the validity of the ambipolar diffusion approximation when predicting the rarefied plasma generated in a hypersonic shock layer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamics of C{sub 2} formation in laser-produced carbon plasma in helium environment

We investigated the role of helium ambient gas on the dynamics of C{sub 2} species formation in laser-produced carbon plasma. The plasma was produced by focusing 1064 nm pulses from an Nd:YAG laser onto a carbon target. The emission from the C{sub 2} species was studied using optical emission spectroscopy, and spectrally resolved and integrated fast imaging. Our results indicate that the formation of C{sub 2} in the plasma plume is strongly affected by the pressure of the He gas. In vacuum, the C{sub 2} emission zone was located near the target and C{sub 2} intensity oscillations were observed both in axial and radial directions with increasing the He pressure. The oscillations in C{sub 2} intensity at higher pressures in the expanding plume could be caused by various formation zones of carbon dimers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The effect of excitation wavelength on dynamics of laser-produced tin plasma

We investigated the effect of the excitation wavelength on the density evolution of laser-produced tin plasmas, both experimentally and numerically. For producing plasmas, Sn targets were excited with either 10.6 {mu}m CO{sub 2} laser or 1.06 {mu}m Nd:yttrium aluminum garnet laser; both are considered to be potential excitation lasers for extreme ultraviolet lithography laser-produced plasma light sources. The electron density of the plasma during the isothermal expansion regime was estimated using an interferometric technique. The Stark broadening of isolated singly-ionized emission was employed for deducing the density during the plasma adiabatic expansion regime. Our results indicate that the excitation source wavelength determines the initial density of the plasma, as well the plume expansion dynamics. Numerical simulation using HEIGHTS simulation package agrees well with the experimentally measured density profile.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cavity formation in a liquid Sn droplet driven by laser ablation pressure for an extreme ultraviolet light source target

An in situ approach to the formation of cavities in liquid Sn droplets for the purpose of increasing ion density from Sn plasma produced by a CO{sub 2} laser is investigated. Two-dimensional hydrodynamic simulations, treating the laser as a pulsed pressure source, are compared both spatially and temporally to experimental shadowgraphs for verification of cavity formation. It is shown that a 15 ns pulse from a 1.064 {mu}m laser with intensity of 2 x 10{sup 10} W/cm{sup 2} creates a cavity approximately 300 {mu}m wide and 100 {mu}m deep in approximately 1.4 {mu}s. The presence of the cavity enhances the conversion of laser energy to 13.5 nm radiation from the plasma.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Time-resolved gas temperature evolution in pulsed Ar-N{sub 2} microwave discharge

Temporal evolution of the gas temperature (T{sub g}) in a pulsed microwave surfaguide discharge is studied by measuring the N{sub 2} rotational temperature. We found that at high power applied per pulse, gas temperature grows linearly, and saturates after about 150 {mu}s. This effect is absent at low power values, or at short pulse durations. Observed T{sub g} behavior correlates with time-resolved measurements of the N{sub 2} vibrational temperature, as well as with N emission lines. Consequently, T{sub g} time behavior was related to N atoms production in plasma. Using obtained T{sub g} growth rates, the effective power used for plasma heating is determined.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

One-dimensional radiation-hydrodynamic scaling studies of imploding spherical plasma liners

One-dimensional radiation-hydrodynamic simulations are performed to develop insight into the scaling of stagnation pressure with initial conditions of an imploding spherical plasma shell or ''liner.'' Simulations reveal the evolution of high-Mach-number (M), annular, spherical plasma flows during convergence, stagnation, shock formation, and disassembly, and indicate that cm- and {mu}s-scale plasmas with peak pressures near 1 Mbar can be generated by liners with initial kinetic energy of several hundred kilo-joules. It is shown that radiation transport and thermal conduction must be included to avoid non-physical plasma temperatures at the origin which artificially limit liner convergence and, thus, the peak stagnation pressure. Scalings of the stagnated plasma lifetime ({tau}{sub stag}) and average stagnation pressure (P{sub stag}, the pressure at the origin, averaged over {tau}{sub stag}) are determined by evaluating a wide range of liner initial conditions. For high-M flows, {tau}{sub stag} {approx} {Delta}R/v{sub 0}, where {Delta}R and v{sub 0} are the initial liner thickness and velocity, respectively. Furthermore, for argon liners, P{sub stag} scales approximately as v{sub 0}{sup 15/4} over a wide range of initial densities (n{sub 0}) and as n{sub 0}{sup 1/2} over a wide range of v{sub 0}. The approximate scaling P{sub stag} {approx} M{sup 3/2} is also found for a wide range of liner-plasma initial conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dependence of the Performance of the Long Pulse RF Driven Negative Ion Source on the Magnetic Filter Field

In the long pulse RF source the plasma drift caused by the magnetic filter field leads to different plasma parameters close to the top and bottom halves of the plasma. In order to investigate the effect of the plasma density on the extracted currents, the bottom grid halve was covered and the direction of the drift was converted by changing the polarity of the magnets. The asymmetry of the plasma density was measured by H{sub {beta}} spectroscopy. By biasing the plasma grid the asymmetry could be enlarged, but the current of co-extracted electrons could be minimized in a similar way for both polarities. The extracted currents of H{sup -} ions as well as of the electrons, however, depend only weakly on the direction of the drift i. e. on the plasma densities. The results indicate that the source performance is determined to a greater degree by the plasma sheath close to the plasma grid which is not yet accessible by diagnostics.

07 ISOTOPE AND RADIATION SOURCES↗

Corona Discharge in Nuclear Excited Dusty Plasma

We considered the possibility of using a corona discharge in a nuclear excited dusty plasma to provide the stability of well ordered dusty plasma structures from a fissionable material and to accomplish a more efficient conversion of nuclear energy into radiation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct measurement of energetic electron flow in Q-shu University experiment with steady-state spherical tokamak

In magnetized plasmas, the presence of a significant number of energetic electrons has been observed but quantitative characteristics of these electrons are proving difficult to investigate. A Langmuir probe offers a means to provide quantitative measurement of these energetic electrons that takes into account electron emissions (secondary electron emission and electron reflection) from the probe tips and sheath expansion around the probe tips caused by a considerable negative potential. In this paper, these effects are experimentally confirmed and an analytical means to measure energetic electron characteristics are proposed. An analysis of plasmas produced by a high frequency wave is then applied leading to the successful detection of an asymmetric flow of energetic electrons. The estimated electron temperature and current density were approximately 4-5 keV and 2-3 kA/m{sup 2}.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Gd plasma source modeling at 6.7 nm for future lithography

Plasmas containing gadolinium have been proposed as sources for next generation lithography at 6.x nm. To determine the optimum plasma conditions, atomic structure calculations have been performed for Gd{sup 11+} to Gd{sup 27+} ions which showed that n = 4 - n = 4 resonance transitions overlap in the 6.5-7.0 nm region. Plasma modeling calculations, assuming collisional-radiative equilibrium, predict that the optimum temperature for an optically thin plasma is close to 110 eV and that maximum intensity occurs at 6.76 nm under these conditions. The close agreement between simulated and experimental spectra from laser and discharge produced plasmas indicates the validity of our approach.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗