SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The frame synchronization performance characteristics are defined that can be measured under actual operating conditions. The frame synchronization process is explained, and test data on the performance of frame synchronizers and frame synchronization codes are presented. The application of frame synchronization methods in specific cases is considered in the light of code selection, frame length, and data recovery.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
One loop provides error signal which adjusts voltage controlled oscillator. Second loop multiplies input signal with generated in-phase signal. Both signals are integrated over bit period. First loop detects null which indicates lockup, and second loop emphasizes impact signal information.
Automatic method for selection of proper guard band eliminates human error and speeds up calibration process. There is also an option which allows a single channel to be calibrated, independently of other channels. Entire system is designed on 3- by 4-inch printed-circuit cards and may be used with any pulse code modulation system.
Digital receiver improves discrimination between information signals and noise and provides order to magnitude reduction in systematic distortion. Receiver combines advantages of band-limiting prefilter and high-amplitude thresholds to provide asynchronous discrimination between information signals and spurious signals.
The performance of a gigabit pulse-code modulation fiber system has been investigated as a function of laser temperature. The bit error rate shows an improvement for temperature in the range of -15 C to -35 C. A tradeoff seems possible between relaxation oscillation, rise time, and signal-to-noise ratio.
Described is the design and evaluation of a microprocessor based digital filter. The filter was made to investigate the feasibility of a digital replacement for the analog pre-sampling filters used in telemetry systems at the NASA Ames-Dryden Flight Research Facility (DFRF). The digital filter will utilize an Intel 2920 Analog Signal Processor (ASP) chip. Testing includes measurements of: (1) the filter frequency response and, (2) the filter signal resolution. The evaluation of the digital filter was made on the basis of circuit size, projected environmental stability and filter resolution. The 2920 based digital filter was found to meet or exceed the pre-sampling filter specifications for limited signal resolution applications.
The technical feasibility for providing significantly enhanced heat transport and storage as well as improved thermal control has been investigated during several Small Business Innovative Research (SBIR) programs for NASA, the United States Air Force (USAF), and the Strategic Defense Initiative Organization (SDIO) using microencapsulated phase change materials (PCMs) in both aqueous and nonaqueous two-component slurries. In the program for SDIO, novel two-component coolant fluids were prepared and successfully tested at both low (300 K) and intermediate temperatures (460 to 700 K). The two-component fluid slurries of microencapsulated PCMs included organic particles in aqueous and nonaqueous liquids, as well as microencapsulated metals that potentially could be carried by liquid metals or used as powdered heat sinks. Simulation and experimental studies showed that such active cooling systems could be designed and operated with enhancements of heat capacity that exceeded 10 times or 1000 percent that for the base fluid along with significant enhancement in the fluid's heat capacity. Furthermore, this enhancement provided essentially isothermal conditions throughout the pumped primary coolant fluid loop. The results suggest that together with much higher fluid thermal capacity, greater uniformity of temperature is achievable with such fluids, and that significant reductions in pumping power, system size, and system mass are also possible.
An innovative concept of using paraffin phase change material with a melting point of 28 C to make Optical Communication type of payload thermally self-sufficient for operation in the Orion Crew Module is presented. It stores the waste heat of the payload and permits it to operate for about one hour by maintaining its temperature within the maximum operating limit. It overcomes the problem of relying on the availability of cold plate heat sink in the Orion Crew Module.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Evaluate the long-term performance of composite materials in space by exposing them to the actual space environment and analyzing changes in their interfacial properties, using the International Space Station (ISS) and the MISSE for experimentation. This research could assist in the design of future spacecraft, assessing risk and enhancing safety and reliability of spacecraft structural materials for space exploration.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Understanding different thermal performance aspects of phase change material heat exchangers (PCM-HX) is critical for designing future energy-efficient thermal energy storage systems. This paper presents an experimental performance analysis of a vertically oriented annular finned-tube PCM-HX in a cylindrical container tested under six different melting and solidification test conditions, varied by heat transfer fluid’s (HTF) inlet temperatures and flow directions. The PCM-HX structure with 20 evenly spaced fins was 3D printed in aluminum, and the PCM-HX container was 285 mm in height. The PCM-HX average porosity was 89.7%, where the PCM mass was 246.4 g. Water served as the HTF, and a PCM with a nominal phase change temperature of 35 °C was selected. Instead of opaque conventional insulation sheets, a combination of air-and-argon-filled see-through insulation cylinders was assembled with the PCM-HX to visualize the phase-change phenomena, while minimizing the uncertainties due to heat loss. In total, there were 78 T-type thermocouples installed in the test section which allows a more precise assessment of thermal mass and heat loss, which are often neglected in similar studies found in the literature. We validated the reliability of the test facility as the repeated test results had negligible deviations under the same test conditions. The energy balances between the estimated theoretical and experimentally calculated PCM storage, considering heat loss and thermal mass, were within ±9% deviation for all test conditions. From the experimental investigations, we made several following observations. It was found that the melting pattern of the finned-tube PCM-HX with small gaps between the container wall and the fins was largely affected by the HTF flow directions, unlike the typical straight annular tube PCM-HX. For effective charging and discharging processes, a combination of upward melting and downward solidification is recommended to shorten the test duration. However, an upward solidification should be considered to minimize the cavity formation between the fins caused by the PCM volume contraction during the solidification process.
Latent heat thermal energy storage (LHTES) using phase change material (PCM) has attracted increased attention as a viable solution for overcoming the mismatch between energy supply and demand for renewable energy-based systems. PCM-embedded heat exchangers (PCM-HX) have the potential to significantly improve thermal performance due to high storage capacity and low temperature variation during the phase change process. Most models for simulating LHTES heat transfer use Computational Fluid Dynamics (CFD) simulations, which have high computational costs resulting from considering the complex and time-dependent physics relevant to PCM-HXs. In this paper, a Generalized Resistance Capacitance-based Model (GRCM) was developed to predict the thermal performance of arbitrary PCM-HXs in a computationally efficient manner without compromising modeling accuracy. The GRCM is exercised for three case studies: (i) verification for a single-slabbed finned PCM-HX, (ii) verification and validation for a copper foam/paraffin composite PCM-HX, and (iii) validation for a straight tube annular finned PCM-HX. The copper foam PCM-HX uses an electric heater at the top of HX, while the other two configurations utilize water as heat transfer fluid. For the single-slabbed finned PCM-HX melting case, the mean deviation in average PCM temperature predicted by the GRCM compared to the CFD model was between 0.56 – 0.73 K, with maximum temperature deviation of 2.68 K. For the HTF outlet temperature, the validation results showed that GRCM prediction matches very well with experimental data, with mean temperature deviation of 0.24 K during melting case, while for solidification case was 0.34 K. These results showcase the GRCM’s capability for accurately reproducing the thermal characteristics of PCM-HXs with considerably lower computational effort.
A polarization consistent framework, where dielectric screening is affected consistently in polarizable continuum model (PCM) calculations, is employed for the study of solvation energies. The computational framework combines a screened range-separated-hybrid functional (SRSH) with PCM calculations, SRSH-PCM, where dielectric screening is imposed in both PCM self-consistent reaction field (SCRF) iterations and the electronic structure Hamiltonian. We begin by demonstrating the impact of modifying the Hamiltonian to include such dielectric screening in SCRF iterations by considering the solutions of electrostatically embedded Hartree–Fock (HF) exact exchange equations. Long-range screened HF-PCM calculations are shown to capture properly the linear dependence of gap energy of frontier orbitals on the inverse of the dielectric constant, whereas unscreened HF-PCM orbital energies are fallaciously semi-constant with respect to the dielectric constant and, therefore, inconsistent with the ionization energy gaps. Similar trends affect density functional theory (DFT) calculations that aim to achieve predictive quality. Importantly, the dielectric screened calculations are shown to significantly affect DFT- and HF PCM-based solvation energies, where screened solvation energies are smaller compared to the unscreened values. Importantly, SRSH-PCM, therefore, appears to reduce the tendency of DFT-PCM to overestimate solvation energies, where we find the effect to increase with the dielectric constant and the polarity of the molecular solute, trends that enhance the quality of DFT-PCM calculations of solvation energy. Understanding the relationship of dielectric screening in the Hamiltonian and DFT-PCM calculations can ultimately benefit on-going efforts for the design of predictive and parameter free descriptions of solvation energies.