Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PARTITION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Data for Glucose Assimilation Rate Determines the Partition of Flux at Pyruvate Between Lactic Acid and Ethanol in Saccharomyces cerevisiae

Engineered Saccharomyces cerevisiae expressing a lactic acid dehydrogenase can metabolize pyruvate into lactic acid. However, three pyruvate decarboxylase (PDC) isozymes drive most carbon flux toward ethanol rather than lactic acid. Deletion of endogenous PDCs will eliminate ethanol production, but the resulting strain suffers from C2 auxotrophy and struggles to complete a fermentation. Engineered yeast assimilating xylose or cellobiose produce lactic acid rather than ethanol as a major product without the deletion of any PDC genes. We report here that sugar flux, but not sensing, contributes to the partition of flux at the pyruvate branch point in S. cerevisiae expressing the Rhizopus oryzae lactic acid dehydrogenase (LdhA). While the membrane glucose sensors Snf3 and Rgt2 did not play any direct role in the option of predominant product, the sugar assimilation rate was strongly correlated to the partition of flux at pyruvate: fast sugar assimilation favors ethanol production while slow sugar assimilation favors lactic acid. Applying this knowledge, we created an engineered yeast capable of simultaneously converting glucose and xylose into lactic acid, increasing lactic acid production to approximately 17 g L−1 from the 12 g L−1 observed during sequential consumption of sugars. This work elucidates the carbon source-dependent effects on product selection in engineered yeast.

Conversion↗
DOE OSTI2026

Evapotranspiration partitioning estimates from 8 methods from 47 NEON sites, 2019-2021

This dataset provides daily estimates of evapotranspiration (ET) and the transpiration-to-evapotranspiration ratio (T/ET) across 47 terrestrial National Ecological Observatory Network (NEON) sites spanning diverse environmental and biome conditions in the United States across three years of data (2019-2021). Daily ET is reported in both energy units (MJ m⁻² day⁻¹) and equivalent water depth (mm day⁻¹), assuming a constant latent heat of vaporization of 2.45 MJ/kg. The primary method uses a hybrid recurrent neural network–Penman–Monteith framework (RNN-PM), which integrates physically based surface energy balance constraints with data-driven learning to partition ET into transpiration and evaporation components. Model inputs include in situ meteorological observations (air temperature, vapor pressure deficit, wind speed, and radiation) combined with satellite-derived land surface temperature, leaf area index, and soil moisture. For benchmarking and uncertainty assessment, T/ET estimates from seven additional models are included: Priestley-Taylor Jet Propulsion Laboratory (PT-JPL), Penman-Monteith (P-M), Two-Source Energy Balance (TSEB), Support Vector Regression (SVR), and Categorical Boosting (CatBoost), among others—spanning empirical, machine-learning, and process-based approaches (see methods section or linked publication for detailed descriptions). Data Package Contents: The dataset a csv files containing daily ET and T/ET estimates for each site and model, along with associated metadata files these variables. Data can be accessed using common spreadsheet software (e.g., Microsoft Excel, LibreOffice) or programming environments such as R or Python. Together, these data support cross-site comparisons of ecosystem water use, evaluation of ET partitioning methods, and development of improved land–atmosphere exchange models.

EARTH SCIENCE > ATMOSPHERE↗
DOE OSTI2020

Higher spin partition functions via the quasinormal mode method in de Sitter quantum gravity

In this note we compute the 1-loop partition function of spin- s s fields on Euclidean de Sitter space S^{2n+1} S 2 n + 1 using the quasinormal mode method. Instead of computing the quasinormal mode frequencies from scratch, we use the analytic continuation prescription L_{\text{AdS}}\to iL_{\text{dS}} L AdS → i L dS , appearing in the dS/CFT correspondence, and Wick rotate the normal mode frequencies of fields on thermal \text{AdS}_{2n+1} AdS 2 n + 1 into the quasinormal mode frequencies of fields on de Sitter space. We compare the quasinormal mode and heat kernel methods of calculating 1-loop determinants, finding exact agreement, and furthermore explicitly relate these methods via a sum over the conformal dimension. We discuss how the Wick rotation of normal modes on thermal \text{AdS}_{2n+1} AdS 2 n + 1 can be generalized to calculating 1-loop partition functions on the thermal spherical quotients S^{2n+1}/\mathbb{Z}_{p} S 2 n + 1 / ℤ p . We further show that the quasinormal mode frequencies encode the group theoretic structure of the spherical spacetimes in question, analogous to the analysis made for thermal AdS in [1-3] .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Randomized Cholesky Preconditioning for Graph Partitioning Applications

Graph partitioning has emerged as an area of interest due to its use in various applications in computational research. One way to partition a graph is to solve for the eigenvectors of the corresponding graph Laplacian matrix. This project focuses on the eigensolver LOBPCG and the evaluation of a new preconditioner: Randomized Cholesky Factorization (rchol). This proconditioner was tested for its speed and accuracy against other well-known preconditioners for the method. After experiments were run on several known test matrices, rchol appears to be a better preconditioner for structured matrices. This research was sponsored by National Nuclear Security Administration Minority Serving Institutions Internship Program (NNSA-MSIIP) and completed at host facility Sandia National Laboratories. As such, after discussion of the research project itself, this report contains a brief reflection on experience gained as a result of participating in the NNSA-MSIIP.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

A Higher Order, Stable Partitioned Scheme for Fluid-Structure Interaction Problems

Although still a very active area of research with many open questions, there exist highly-accurate and efficient algorithms for numerically estimating solutions to the equations of fluid motion. Similarly, great strides have been made in numerically modeling the motion of solids. However, there exist many practical applications where one must solve both fluid and structure in tandem. There is a gap in the literature for high order unconditionally stable partitioned algorithms for problems of this type. We investigate a new partitioned scheme which shows promise in filling this gap. We use a finite-element-based model with an added mass approach on problems coupling the Euler beam equation with the incompressible Navier-Stokes equations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Springtime Drought Shifts Carbon Partitioning of Recent Photosynthates in 10-Year Old Picea mariana Trees, Causing Restricted Canopy Development

Springtime bud-break and shoot development induces substantial carbon (C) costs in trees. Drought stress during shoot development can impede C uptake and translocation. This is therefore a channel through which water shortage can lead to restricted shoot expansion and physiological capacity, which in turn may impact annual canopy C uptake. We studied effects of drought and re-hydration on early season shoot development, C uptake and partitioning in five individual 10-year old Picea mariana [black spruce] trees to identify and quantify dynamics of key morphological/physiological processes. Trees were subjected to one of two treatments: (i) well-watered control or (ii) drought and rehydration. We monitored changes in morphological [shoot volume, leaf mass area (LMA)], biochemical [osmolality, non-structural carbohydrates (NSC)] and physiological [rates of respiration (R d ) and light-saturated photosynthesis ( A sat )] processes during shoot development. Further, to study functional compartmentalization and use of new assimilates, we 13 C-pulse labeled shoots at multiple development stages, and measured isotopic signatures of leaf respiration, NSC pools and structural biomass. Shoot water potential dropped to a minimum of −2.5 MPa in shoots on the droughted trees. Development of the photosynthetic apparatus was delayed, as shoots on well-watered trees broke-even 14 days prior to shoots from trees exposed to water deficit. R d decreased with shoot maturation as growth respiration declined, and was lower in shoots exposed to drought. We found that shoot development was delayed by drought, and while rehydration resulted in recovery of A sat to similar levels as shoots on the well-watered trees, shoot volume remained lower. Water deficit during shoot expansion resulted in longer, yet more compact (i.e., with greater LMA) shoots with greater needle osmolality. The 12 C: 13 C isotopic patterns indicated that internal C partitioning and use was dependent on foliar developmental and hydration status. Shoots on drought-stressed trees prioritized allocating newly fixed C to respiration over structural components. In conclusion, temporary water deficit delayed new shoot development and resulted in greater LMA in black spruce. Since evergreen species such as black spruce retain active foliage for multiple years, impacts of early season drought on net primary productivity could be carried forward into subsequent years.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Quantitative measurements of reactive oxygen species partitioning in electron transfer flavoenzyme magnetic field sensing

Biological magnetic field sensing that gives rise to physiological responses is of considerable importance in quantum biology. The radical pair mechanism (RPM) is a fundamental quantum process that can explain some of the observed biological magnetic effects. In magnetically sensitive radical pair (RP) reactions, coherent spin dynamics between singlet and triplet pairs are modulated by weak magnetic fields. The resulting singlet and triplet reaction products lead to distinct biological signaling channels and cellular outcomes. A prevalent RP in biology is between flavin semiquinone and superoxide (O 2 •–) in the biological activation of molecular oxygen. This RP can result in a partitioning of reactive oxygen species (ROS) products to form either O 2 •– or hydrogen peroxide (H 2 O 2 ). Here, we examine magnetic sensing of recombinant human electron transfer flavoenzyme (ETF) reoxidation by selectively measuring O 2 •– and H 2 O 2 product distributions. ROS partitioning was observed between two static magnetic fields at 20 nT and 50 μT, with a 13% decrease in H 2 O 2 singlet products and a 10% increase in O 2 •– triplet products relative to 50 µT. RPM product yields were calculated for a realistic flavin/superoxide RP across the range of static magnetic fields, in agreement with experimental results. For a triplet born RP, the RPM also predicts about three times more O 2 •– than H 2 O 2 , with experimental results exhibiting about four time more O 2 •– produced by ETF. The method presented here illustrates the potential of a novel magnetic flavoprotein biological sensor that is directly linked to mitochondria bioenergetics and can be used as a target to study cell physiology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Energy Partition in Collisionless Counterstreaming Plasmas

Fast, counterstreaming plasma outflows drive magnetic field amplification, plasma heating, and particle acceleration in numerous astrophysical environments, from supernova remnant shocks to active galactic nuclei jets. Understanding how, in the absence of Coulomb collisions, energy is redistributed between the different plasma species remains a fundamental open question. We use three-dimensional, fully kinetic simulations to investigate energy partition in weakly magnetized counterpropagating plasmas. Our results reveal a complex interplay between different processes, where at early times the Weibel instability drives a first stage of magnetic field amplification and at late times the kinking of current filaments drives a second amplification stage via a dynamo-type mechanism. Electrons are heated primarily during the latter phase through magnetic pumping. By the time the flows thermalize, we observe that the final temperature ratio T e /T i and energy partition depend on the ion-to-electron mass ratio. For electron–proton flows, the electron thermal energy only reaches up to a few percent of the initial ion kinetic energy.

Marret, Alexis [SLAC National Accelerator Laborato↗
DOE OSTI2024

Tailorable Multi–Modular Pore–Space–Partitioned Vanadium Metal–Organic Frameworks for Gas Separation

Currently, few porous vanadium metal-organic frameworks (V-MOFs) are known and even fewer are obtainable as single crystals, resulting in limited information on their structures and properties. Here this work demonstrates remarkable promise of V-MOFs by presenting an extensible family of V-MOFs with tailorable pore geometry and properties. The synthesis leverages inter-modular synergy on a tri-modular pore-partitioned platform. New V-MOFs show a broad range of structural features and sorption properties suitable for gas storage and separation applications for C 2 H 2 /CO 2 , C 2 H 6 /C 2 H 4 , and C 3 H 8 /C 3 H 6 . The c/a ratio of the hexagonal cell, a measure of pore shape, is tunable from 0.612 to 1.258. Other tunable properties include pore size from 5.0 to 10.9 Å and surface area from 820 to 2964 m 2 g –1 . With C 2 H 2 /CO 2 selectivity from 3.3 to 11 and high uptake capacity for C 2 H 2 from 65.2 to 182 cm 3 g –1 (298K, 1 bar), an efficient separation is confirmed by breakthrough experiments. The near-record high uptake for C 2 H 6 (166.8 cm 3 g –1 ) contributes to the promise for C 2 H 6 -selective separation of C 2 H 6 /C 2 H 4 . The multi-module pore expansion enables transition from C 3 H 6 -selective to more desirable C 3 H 8 -selective separation with extraordinarily high C 3 H 8 uptake (254.9 cm 3 g –1 ) and high separation potential (1.25 mmol g –1 ) for C 3 H 8 /C 3 H 6 (50:50 v/v) mixture.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Ultrastable Carboxyl–Functionalized Pore–Space–Partitioned Metal–Organic Frameworks for Gas Separation

Isoreticular chemistry, which enables property optimization by changing compositions without changing topology, is a powerful synthetic strategy. One of the biggest challenges facing isoreticular chemistry is to extend it to ligands with strongly coordinating substituent groups such as unbound –COOH, because competitive interactions between such groups and metal ions can derail isoreticular chemistry. It is even more challenging to have an isoreticular series of carboxyl-functionalized MOFs capable of encompassing chemically disparate metal ions. Furthermore, with the simultaneous introduction of carboxyl functionalization and pore space partition, a family of carboxyl-functionalized materials is developed in diverse compositions from homometallic Cr 3+ and Ni 2+ to heterometallic Co 2+ /V 3+ , Ni 2+ /V 3+ , Co 2+ /In 3+ , Co 2+ /Ni 2+ . Cr-MOFs remain highly crystalline in boiling water. Unprecedentedly, one Cr-MOF can withstand the treatment cycle with 10m NaOH and 12m HCl, allowing reversible inter-conversion between unbound –COOH acid form and –COO – base form. These materials exhibit excellent sorption properties such as high uptake capacity for CO 2 (100.2 cm 3 g –1 ) and hydrocarbon gases (e.g., 142.1 cm 3 g –1 for C 2 H 2 , 110.5 cm 3 g –1 for C 2 H 4 ) at 1 bar and 298K, high benzene/cyclohexane selectivity (up to ≈40), and promising separation performance for gas mixtures such as C 2 H 2 /CO 2 and C 2 H 2 /C 2 H 4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Evapotranspiration Partitioning Using Flux Tower Data in a Semi-Arid Ecosystem

Information about evapotranspiration (ET) and its components, that is, evaporation and transpiration, is crucial for a wide range of water and ecosystem management applications. However, partitioning ET into its two components is often challenging because of their spatiotemporal variabilities and lack of process understanding. This study developed a machine learning (ML) framework to shed light on ET processes and assess the relative importance of different drivers by incorporating hydrometeorology and biomass productivity variables. The Shapley Additive Explanations (SHAP) approach was applied to enhance explainability and rank the importance of ET drivers and their components. A total of 62 variables covering hydrometeorological and biomass productivity dimensions were considered from the Reynolds Creek Critical Zone Observatory (CZO) station in Idaho. The variable importance assessment identified the leading drivers individually for evaporation, transpiration and ET (soil water content for evaporation, vapour pressure deficit for transpiration and soil water content for ET). The results further highlighted the value of combining hydrometeorological and biomass productivity variables to achieve better predictability of ET processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Enhancing Mechanical Properties of Carbon–Silicon Steel through Two–Stage Quenching and Partitioning with Bainitic Transformation: Ultimate Tensile Strength of 1875 MPa and Total Elongation of 8.03%

To achieve the desired microstructural properties, the ongoing development and innovation in new structural steels require novel thermal processing. This study aims to improve the mechanical properties of a commercial spring carbon–silicon steel by tailoring its microstructure through a process involving quenching and partitioning (Q&P) followed by bainitic transformation. A two–stage Q&P process is proposed to generate a nanoscale dispersion of stable retained austenite and carbides within the tempered martensite and bainite microstructure. The resulting tensile properties demonstrate a yield strength of 1280 MPa, an ultimate tensile strength of 1875 MPa, and a total elongation of 8.03%. These values surpass those of conventional spring 9254 steel, highlighting the effectiveness of the thermal treatment design. Microstructure analysis reveals the presence of tempered martensite, bainite sheaves, nanoscale carbides, and aggregates of retained austenite. Moreover, the resulting body–centered cubic matrix exhibits minimal lattice tetragonality of ≈1.0051, coupled with stable retained austenite featuring a carbon concentration of ≈3.42 ± 0.5 wt%, resulting in outstanding strength–ductility properties. In conclusion, these findings indicate that the proposed two–stage Q&P process, followed by bainitic transformation, significantly enhances the mechanical properties of carbon–silicon steels, making it a promising candidate for high–performance spring applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Revisiting a Drag Partition Model For Canopy-Like Roughness Elements

Turbulent flows over a large surface area (S) covered by n obstacles experience an overall drag due to the presence of the ground and the protruding obstacles into the flow. The drag partition between the roughness obstacles and the ground is analyzed using an analytical model proposed by Raupach (Boundary-Layer Meteorol 60:375-395, 1992) and is hereafter referred to as R92. The R92 is based on the premise that the wake behind an isolated roughness element can be described by a shelter area A and a shelter volume V. The individual sizes of A and V without any interference from other obstacles can be determined from scaling analysis for the spread of wakes. To upscale from an individual roughness element to n/S elements where wakes may interact, R92 adopted a background stress re-normalizing instead of reducing A or V with each element addition. This work demonstrates that R92’s approach results in a linear background stress reduction in A and V only when the ratio of n/S is small, due to a low probability of wake interactions. This probabilistic nature suggests that up-scaling from individual to multiple roughness elements can be re-formulated using stochastic averaging methods proposed here. The two approaches are shown to recover R92 under plausible conditions. An alternative scaling for the shelter volume is also proposed here using thermodynamic arguments of work and dissipation though the final outcome remains similar to R92. Comparisons between R92 and available data spanning more than two decades after R92 on blocks and vegetation-like roughness elements confirm the practical utility of R92. The agreement between R92 and this updated databases of experiments and simulations confirm the potential use of R92 in large-scale models provided that the relevant parameters accommodate certain features of the roughness element type (cube versus vegetation-like) and, to a lesser extent, their configuration throughout S. Last, a comparison between R92 and models based on first-order closure principles with constant mixing length suggests that R92 can outperform such models when evaluated across a wide range of roughness densities.

canopy turbulence↗
DOE OSTI2021

A parallel evolutionary multiple-try metropolis Markov chain Monte Carlo algorithm for sampling spatial partitions

We develop an Evolutionary Markov Chain Monte Carlo (EMCMC) algorithm for sampling spatial partitions that lie within a large, complex, and constrained spatial state space. Our algorithm combines the advantages of evolutionary algorithms (EAs) as optimization heuristics for state space traversal and the theoretical convergence properties of Markov Chain Monte Carlo algorithms for sampling from unknown distributions. Local optimality information that is identified via a directed search by our optimization heuristic is used to adaptively update a Markov chain in a promising direction within the framework of a Multiple-Try Metropolis Markov Chain model that incorporates a generalized Metropolis-Hastings ratio. We further expand the reach of our EMCMC algorithm by harnessing the computational power afforded by massively parallel computing architecture through the integration of a parallel EA framework that guides Markov chains running in parallel.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Low-lying states and total internal partition sums of CH

The electronic structure and spin-orbit states of the CH radical have been systematically investigated using multi-reference configuration interaction (MRCI) and single-reference coupled-cluster (CC) methods. These calculations were performed in conjunction with large correlation-consistent basis sets of quadruple-, quintuple-, and sextuple-ζ quality. To achieve high accuracy, electronic energies for all states were extrapolated to the complete basis set (CBS) limit, enabling the detailed construction of potential energy curves and determination of reliable spectroscopic constants. Spin-orbit coupling effects were explicitly incorporated, and vibrational energy levels were computed via Numerov analysis. Furthermore, the resulting values exhibit good to excellent agreement with available experimental data. Dipole moment and transition dipole moment curves were evaluated to assess the opacity characteristics of CH, revealing that transitions such as Χ 2 Π (u′′ = 0) → Α 2 Δ (u′ = 0), Χ 2 Π (u′′ = 0) → Β 2 Σ − (u′ = 0), Χ 2 Π (u′′ = 0) → C 2 Σ + (u′ = 0), and Χ 2 Π (u′′ = 0) → D 2 Σ + (u′ = 3) are particularly probable. Finally, the total internal partition function sum (TIPS) of CH was computed over a broad temperature range (10–30,000 K) based on our high-accuracy ab initio results.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Adsorbate Partition Functions via Phase Space Integration: Quantifying the Effect of Translational Anharmonicity on Thermodynamic Properties

A new method for computing anharmonic thermophysical properties for adsorbates on metal surfaces is presented. Classical Monte Carlo phase space integration is performed to calculate the partition function for the motion of a hydrogen atom on Cu(111). Here, a minima-preserving neural network potential energy surface is used within the integration routine. Two different sampling schema for generating the training data are presented, and two different density functionals are used. The results are benchmarked against direct state counting results by using discrete variable representation. The phase space integration results are in excellent quantitative agreement with the benchmark results. Additionally, both the discrete variable representation and the phase space integration results confirm that the motion of H on Cu(111) is highly anharmonic. The results were applied to calculate the free energy of dissociative adsorption of H 2 and the resulting Langmuir isotherms at 400, 800, and 1200 K in a partial pressure range of 0–1 bar. It shows that the anharmonic effects lead to significantly higher predicted surface site fractions of hydrogen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Partitioning of Seven Different Classes of Antibiotics into LPS Monolayers Supports Three Different Permeation Mechanisms through the Outer Bacterial Membrane

The outer membrane (OM) of Gram-negative (G-) bacteria presents a barrier for x classes of antibacterial agents. Lipopolysaccharide (LPS), present in the outer leaflet of the OM, is stabilized by divalent cations and is considered to be the major impediment for antibacterial agent permeation. However, the actual affinities of major antibiotic classes toward LPS have not yet been determined. In the present work, we use Langmuir monolayers formed from E. coli Re and Rd types of LPS to record pressure-area isotherms in the presence of antimicrobial agents. Our observations suggest three general types of interactions. Firstly, some antimicrobials demonstrated no measurable interactions with LPS. This lack of interaction in the case of cefsulodin, a third-generation cephalosporin antibiotic, correlates with its low efficacy against G- bacteria. Ampicillin and ciprofloxacin also show no interactions with LPS, but in contrast to cefsulodin, both exhibit good efficacy against G- bacteria, indicating permeation through common porins. Secondly, we observe substantial intercalation of the more hydrophobic antibiotics novobiocin, rifampicin, azithromycin, and telithromycin into relaxed LPS monolayers. These largely re-partition back to the subphase with monolayer compression. We find that the hydrophobic area, charge, and dipole all show correlations with both the mole fraction of antibiotic retained in the monolayer at the monolayer-bilayer equivalence pressure and the efficacies of these antibiotics against G- bacteria. Thirdly, amine-rich gentamicin and the cationic antimicrobial peptides polymyxin B and colistin show no hydrophobic insertion but are instead strongly driven into the polar LPS layer by electrostatic interactions in a pressure-independent manner. Their intercalation stably increases the area per molecule (by up to 20%), which indicates massive formation of defects in the LPS layer. These defects support a self-promoted permeation mechanism of these antibiotics through the OM, which explains the high efficacy and specificity of these antimicrobials against G- bacteria.

lateral pressure↗
DOE OSTI2025

Real-Time Measurements of Gas-Phase Medium-Chain Chlorinated Paraffins Reveal Daily Changes in Gas-Particle Partitioning Controlled by Ambient Temperature

Chlorinated paraffins (CPs) are synthetic polychlorinated n-alkanes produced as mixtures of a range of C x Cl y H 2x–y+2 formulas. CPs have numerous industrial applications but are toxic, long-lived, and environmentally ubiquitous with environmental releases occurring throughout their production, use, and disposal. Short-chain chlorinated paraffins (SCCPs, C 10–13 ) have been regulated by the United States Environmental Protection Agency since 2009 and by the Stockholm Convention since 2017. SCCP regulation is expected to cause increased production of medium-chain chlorinated paraffins (MCCPs; C 14–17 ), which are currently under consideration for Stockholm Convention regulations. Thus, there is a need to improve the understanding of MCCP environmental transport, distribution, and fate. Existing measurements are limited in their spatial and temporal coverage. Measurements of CP atmospheric loading are particularly scarce. Historically, these measurements have required long sampling times, obscuring the temporal behavior of atmospheric CPs. We report real-time in situ measurements of 18 gas-phase MCCPs. These measurements were made in the United States Southern Great Plains with nitrate ion chemical ionization mass spectrometry (NO 3 –CIMS). Here, the estimated average lower-limit concentration of MCCPs is on the order of single-digit ng/m 3 . MCCP diel behavior is partially explained by gas-particle partitioning with implications for MCCP transport and lifetimes.

54 ENVIRONMENTAL SCIENCES↗