Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Passive and Active L-Band System and Observations During the 2007 CLASIC Campaign

This article describes the upgraded PALS instrument and the characteristics of data acquired from the Cloud Land Atmospheric Interaction Campaign (CLASIC) 2007. The data acquired over lake passes were used to remove the radiometer calibration bias. The calibrated radiometer data showed significant consistency with the L-band land emission model for soil surfaces published in the literature. We observed significant temporal (days) changes of a few dB in the radar data. The change of radar backscatter appeared to correlate well with the change of in-situ soil moisture or the soil moisture data derived from the PALS dual-polarized brightness temperatures. The radar vegetation index also correlated well with the vegetation opacity estimated from the radiometer data. The preliminary analyses suggest complementary information contained in the surface emissivity and backscatter signatures for the retrieval of soil moisture and vegetation water content.

Soil moisture↗
NASA NTRS2015

Unsteady Three-Dimensional Simulation of a Shear Coaxial GO2/GH2 Rocket Injector with RANS and Hybrid-RAN-LES/DES Using Flamelet Models

Historically, the analysis and design of liquid rocket engines (LREs) has relied on full‐scale testing and one‐dimensional empirical tools. The testing is extremely expensive and the one‐dimensional tools are not designed to capture the highly complex, and multi‐dimensional features that are inherent to LREs. Recent advances in computational fluid dynamics (CFD) tools have made it possible to predict liquid rocket engine performance, stability, to assess the effect of complex flow features, and to evaluate injector‐driven thermal environments, to mitigate the cost of testing. Extensive efforts to verify and validate these CFD tools have been conducted, to provide confidence for using them during the design cycle. Previous validation efforts have documented comparisons of predicted heat flux thermal environments with test data for a single element gaseous oxygen (GO2) and gaseous hydrogen (GH2) injector. The most notable validation effort was a comprehensive validation effort conducted by Tucker et al. [1], in which a number of different groups modeled a GO2/GH2 single element configuration by Pal et al [2]. The tools used for this validation comparison employed a range of algorithms, from both steady and unsteady Reynolds Averaged Navier‐Stokes (U/RANS) calculations, large‐eddy simulations (LES), detached eddy simulations (DES), and various combinations. A more recent effort by Thakur et al. [3] focused on using a state‐of‐the‐art CFD simulation tool, Loci/STREAM, on a two‐dimensional grid. Loci/STREAM was chosen because it has a unique, very efficient flamelet parameterization of combustion reactions that are too computationally expensive to simulate with conventional finite‐rate chemistry calculations. The current effort focuses on further advancement of validation efforts, again using the Loci/STREAM tool with the flamelet parameterization, but this time with a three‐dimensional grid. Comparisons to the Pal et al. heat flux data will be made for both RANS and Hybrid RANSLES/ Detached Eddy simulations (DES). Computation costs will be reported, along with comparison of accuracy and cost to much less expensive two‐dimensional RANS simulations of the same geometry.

Westra, Doug G.↗
NASA NTRS2018

Generation of Performance Model for the Aeolian Wind Tunnel (AWT) Rotor at Reduced Pressure

The NASA Jet Propulsion Laboratory (JPL) designed the Mars Helicopter (MH) in collaboration with AeroVironment Inc., NASA Ames Research Center, and NASA Langley Research Center to explore the possibility of a vertical takeoff and landing (VTOL) Unmanned Aerial Vehicle (UAV) for flight on Mars. A 40-inch-diameter Aeolian Wind Tunnel (AWT) rotor, roughly approximating the proposed MH design by JPL, was tested in forward flight at Mars atmospheric pressure at the NASA Ames Planetary Aeolian Laboratory (PAL) in support of MH research efforts. This report describes the generation of the rotor model used to correlate with that experimental effort as reported by Ament and Koning. The 40-inch-diameter rotor was 3D-scanned and transformed into an airfoil deck. The scanned rotor airfoil sections are analyzed using C81 Generator (C81Gen) to generate the sectional aerodynamic coefficients for comprehensive analyses. A mid-fidelity computational fluid dynamics (CFD) simulation using Rotorcraft CFD (RotCFD) is pursued to efficiently estimate rotor hover and forward flight performance. Simulations at two pressures, 7 mbar (approximate Martian atmospheric pressure) and 1018 mbar (1 atmosphere), are performed to gain an understanding of the performance differences and Reynolds number effects observed. Experimental 1-atmosphere thrust for single- and dual-rotor isolated hover cases correlate well with the modeled rotor. Performance results at reduced pressure (7 mbar) show a drastic decrease in lift for equivalent RPMs tested at 1 atmosphere. Although this is primarily due to pressure reduction, Reynolds number effects also contribute to this decrease, as airfoil lift and drag coefficients are affected when compared with 1-atmosphere results. Further, simulated rotor power coefficient shows drastic increases at reduced pressures, attributed to laminar boundary layer separation, as described in Koning et al. for the MH rotor analysis. PAL experimental Martian Surface Wind Tunnel (MARSWIT) results are presented in the paper by Ament and Koning. The very low Reynolds number range is currently not well understood and presents various challenges for both experimentation and simulation.

Koning, Witold J. F.↗
NASA NTRSDate not supplied

VSLAM and Coplanar POSIT for Advanced Air Mobility Approach and Landing

Advanced Air Mobility (AAM) aircraft have many challenges for landing accurately and safely in urban, suburban, and rural environments. Localization in large and open rural environments could utilize GPS, but AAM aircraft in urban environments will encounter GPS degradation. Another challenge involves flight operation time, i.e., flying during the day or at night. There are different types of guidelines and landmarks at runways, heliports, and vertiports for daytime and nighttime applications. Tailoring feature detection methods for AAM approach and landing during the day and night pose different issues and challenges. It is easier to detect edges, lines, and other runway markers during the day than at night. Conversely, it is easier to detect landing light configurations and patterns at nighttime than daytime. Consequently, utilizing the same feature detector for daytime and nighttime operations may not be feasible. This paper focuses on vision-based precision approach and landing (PAL) and builds on previous work by comparing ORB SLAM, custom VSLAM, and coplanar pose from orthography and scaling with iterations (POSIT) for daytime and nighttime operations. Implementing high fidelity simulations with computer graphics and extracting video frames from flight test data provide promising results for AAM PAL applications.

Evan Kawamura↗
DOE OSTI2012

Omics Tools

The Omics Tools package provides several small trivial tools for work in genomics. This single portable package, the “omics.jar” file, is a toolbox that works in any Java-based environment, including PCs, Macs, and supercomputers. The number of tools is expected to grow. One tool (called cmsearch.hadoop or cmsearch.local), calls the external cmsearch program to predict non-coding RNA in a genome. The cmsearch program is part of the third-party Infernal package. Omics Tools does not contain Infernal. Infernal may be installed separately. The cmsearch.hadoop subtool requires Apache Hadoop and runs on a supercomputer, though cmsearch.local does not and runs on a server. Omics Tools does not contain Hadoop. Hadoop mat be installed separartely The other tools (cmgbk, cmgff, fastats, pal, randgrp, randgrpr, randsub) do not interface with third-party tools. Omics Tools is written in Java and Scala programming languages. Invoking the “help” command shows currently available tools, as shown below: schaumbe@gpint06:~/proj/omics$ java -jar omics.jar help Known commands are: cmgbk : compare cmsearch and GenBank Infernal hits cmgff : compare hits among two GFF (version 3) files cmsearch.hadoop : find Infernal hits in a genome, on your supercomputer cmsearch.local : find Infernal hits in a genome, on your workstation fastats : FASTA stats, e.g. # bases, GC content pal : stem-loop motif detection by palindromic sequence search (code stub) randgrp : random subsample without replacement, of groups randgrpr : random subsample with replacement, of groups (fast) randsub : random subsample without replacement, of file lines For more help regarding a particular command, use: java -jar omics.jar command help Usage: java -jar omics.jar command args

Schaumberg, Andrew↗
DOE OSTI2011

LONG-TERM TRANSIT TIMING MONITORING AND REFINED LIGHT CURVE PARAMETERS OF HAT-P-13b

We present 10 new transit light curves of the transiting hot Jupiter HAT-P-13b, obtained during two observational seasons by three different telescopes. When combined with 12 previously published light curves, we have a sample consisting of 22 transit light curves, spanning 1041 days across four observational seasons. We use this sample to examine the recently observed large-amplitude transit timing variations (TTVs) by Pal et al. and give refined system parameters. We find that the transit times are consistent with a linear ephemeris, with the exception of a single transit time, from UT 2009 November 5, for which the measured mid-transit time significantly deviates from our linear ephemeris. The nature of this deviation is not clear, and the rest of the data do not show any significant TTVs.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2022

Progress in Time-Series Soil Moisture Retrieval Using L- and S-Band Radar Backscatter

L- and S-band observations from NASA's Passive/Active L/S band (PALS) sensor from the SMEX02 campaign were used to estimate soil moisture. The retrieval process is based on the “alpha approximation” method. This method utilizes a time-series of normalized radar backscatter measurements as well as ancillary information to estimate soil moisture over the Walnut Creek watershed. The resulting retrieved soil moistures are compared to in-situ soil moisture measurements at multiple test sites within the watershed. The calculations show reasonable results for both L- and S-band and provide further insight into the use of L- and S-bands for the upcoming NASA/ISRO mission.

Soil moisture↗
DOE OSTI2024

Tailoring the Gating Effect of Organic Cage via a Porous Liquid Approach

Porous liquids (PLs) represent a new frontier in material design combining the merits of solid porous host and liquid phase in gas separation and catalysis. Herein, the PL construction approach is harnessed to tailor the gating effect of organic cages toward enhanced gas separation. A type-II fluorinated PL (F-PL) is developed via liquifying a fluorinated organic cage (F-cage) by a fluorinated ionic liquid (F-IL). The F-cage is featured by a small window size (≈5.1 Å), high surface area, good stability under highly ionic conditions, and abundant fluorine moieties. The F-IL possesses high steric hindrance (bulky cation) and structure similarity with the F-cage (fluorinated alkyl chain in the anion). The existing status structure integrity of F-cage in F-IL upon F-PL formation is illustrated via spectroscopy and X-ray-based techniques. The existence of rigid voids in F-PL is illustrated by positron annihilation lifetime spectroscopy (PALS) and the improved gas uptake capacity than F-IL via pressure-swing CO 2 uptake isotherms (0–40) bar. Further, the comparison of the gas uptake behavior (CO 2 , N 2 , CH 4 , and Xe) of F-PL and F-cage, combining the computational simulation, highlights that the PL construction can be leveraged to tune the window size of porous scaffolds, leading to enhanced gas selectivity.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Detection and Mitigation of Radionuclides in the Environment: Toward a Clean Ecosystem

This research describes a straightforward approach to producing surface-engineered nanomaterials for the detection and mitigation of radionuclides generated in nuclear facilities. Here, a micelle forming surfactant ligand, namely cetyltrimethylammonium bromide (CTAB), was engineered on the surface of iron oxide nanoparticles and explored for the removal of radioactive materials, such as pertechnetate (TcO 4 – ), from aqueous environments. A series of analytical tools were employed to characterize the nanocomposite materials, such as SEM, EDS, UV-Vis spectroscopy, DLS, and PALS, and evaluated for their ability to capture a model analyte, perrhenate (ReO 4 – ) ions. The iron oxide magnetic nanoparticles retain their magnetic properties after surface functionalization and can be easily manipulated and collected with a magnet. Therefore, these nanocomposite materials can be used to remotely remediate environments by scavenging and collecting radionuclide species at the desired location.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2014

An enhanced droplet-based liquid microjunction surface sampling system coupled with HPLC-ESI-MS/MS for spatially resolved analysis

Droplet-based liquid microjunction surface sampling coupled with high-performance liquid chromatography (HPLC)-electrospray ionization (ESI)-tandem mass spectrometry (MS/MS) for spatially resolved analysis provides the possibility of effective analysis of complex matrix samples and can provide a greater degree of chemical information from a single spot sample than is typically possible with a direct analysis of an extract. Described here is the setup and enhanced capabilities of a discrete droplet liquid microjunction surface sampling system employing a commercially available CTC PAL autosampler. The system enhancements include incorporation of a laser distance sensor enabling unattended analysis of samples and sample locations of dramatically disparate height as well as reliably dispensing just 0.5 μL of extraction solvent to make the liquid junction to the surface, wherein the extraction spot size was confined to an area about 0.7 mm in diameter; software modifications improving the spatial resolution of sampling spot selection from 1.0 to 0.1 mm; use of an open bed tray system to accommodate samples as large as whole-body rat thin tissue sections; and custom sample/solvent holders that shorten sampling time to approximately 1 min per sample. Lastly, the merit of these new features was demonstrated by spatially resolved sampling, HPLC separation, and mass spectral detection of pharmaceuticals and metabolites from whole-body rat thin tissue sections and razor blade (“crude”) cut mouse tissue.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Effect of Cobalt Oxide Nanoparticles on the Nano-scale Free Volume and Optical Properties of Biodegradable CMC/PVA Films

Chemically prepared cobalt oxide nanoparticles (NPs) were added to biodegradable carboxymethyl cellulose (CMC) (20%)/polyvinyl alcohol (PVA) (80%) blend films. The structural properties of these films were investigated by X-ray diffraction, Fourier transformation infrared spectroscopy (FTIR) and differential thermal analysis (DTA). Co{sub 3}O{sub 4}/(CMC + PVA) films show a semi-crystalline structure and the degree of crystallinity decreases with adding Co{sub 3}O{sub 4} NPs. FTIR confirms the good interaction between the blend chains and Co{sub 3}O{sub 4} NPs. The melting temperature T{sub m} for CMC/PVA is about 212 °C then decreased with increasing Co{sub 3}O{sub 4} content, due to some decrease in the ordered association of the blend which results in a decrease in the blend crystallinity. Positron annihilation lifetime spectroscopy (PALS) measurements were carried out with a conventional fast–fast coincidence spectrometer. It was found that ortho-positronium lifetime τ{sub 3} and free volume V{sub f} increase while o-Ps intensity I{sub 3} still constant as Co{sub 3}O{sub 4} concentration increases. This is because adding Co{sub 3}O{sub 4} NPs encourages the formation of o-Ps. The swelling ratio SR% as a function of Co{sub 3}O{sub 4} concentration was also studied and its value increases with Co{sub 3}O{sub 4} addition. The optical study illustrated the decrease of the transmittance T of the films from 87 to 35.5% with increasing Co{sub 3}O{sub 4} content from 0 to 0.9 wt%. Also, both the direct and indirect optical band gaps of the films red-shifted from 4.05 to 3.75 eV and 3.3 to 2.75 eV, respectively. The influence of Co{sub 3}O{sub 4} on the refractive index of the films is also reported.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

Suppression of NF-κB activation by PDLIM2 restrains hepatic lipogenesis and inflammation in high fat diet induced mice

Highlights: • PDLIM2 deficiency promotes HFD-induced mice obesity and insulin resistance. • PDLIM2 deficiency promotes hepatic dyslipidemia in HFD-induced mice. • PDLIM2 deficiency intensifies HFD-induced hepatic inflammation. • Reducing NF-κB activation attenuates PDLIM2 deficiency-exacerbated inflammation and dyslipidemia in PAL-treated primary hepatocytes. Non-alcoholic fatty liver disease (NAFLD) is characterized by hepatic steatosis, insulin resistance, dyslipidemia and a systemic pro-inflammatory response, a leading cause of cirrhosis and hepatocellular carcinoma. Here, we showed that PDZ-LIM domain-containing protein 2 (PDLIM2) was an effective suppressor of steatohepatitis. After 16 weeks on a high fat diet (HFD), obesity, insulin resistance, hepatic dyslipidemia and inflammation were markedly aggravated in PDLIM2-knockout (KO) mice. PDLIM2 deletion resulted in lipid accumulation in liver tissue samples of HFD-induced mice, as evidenced by the significant increase of hepatic TG and TC through reducing the expression of lipogenesis- and transcriptional regulators of lipid metabolism-related genes and enhancing fatty acid oxidation-associated molecules. In addition, PDLIM2-ablation promoted the expression of pro-inflammatory cytokines by activating nuclear factor kappa-B (NF-κB) signaling pathway, as supported by the remarkable increase of phosphorylated IKKβ, IκBα and NF-κB expressions in liver of HFD-fed mice. Of note, the in vitro study demonstrated that PDLIM2 ablation-enhanced inflammatory response and disorder of lipid metabolism were abrogated by suppressing NF-κB activity. Collectively, the findings could lead to the development of potential therapeutic strategy to prevent NAFLD and associated metabolic disorders by targeting PDLIM2.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Suppressing Irf2bp2 expressions accelerates metabolic syndrome-associated brain injury and hepatic dyslipidemia

Highlights: • Irf2bp2 deletion promotes HFD-induced metabolic syndrome and cognitive dysfunction in mice. • Irf2bp2 knockout aggravates brain injury in HFD-fed mice. • Irf2bp2 ablation alleviates oxidative stress and inflammation in brain of HFD-fed mice. • Suppressing Irf2bp2 expressions exacerbate inflammatory response in PAL- or LPS-treated BV2 cells. Increasing studies indicate that high fat diet (HFD) induces neuroinflammation in animal models with obesity, yet the pathology of it is unclear. Interferon Regulatory Factor 2 Binding Protein 2 (Irf2bp2) is a key regulator of macrophage polarization, playing an essential role in regulating inflammatory response. This study investigated the effects of Irf2bp2 on HFD-induced brain injury, and explored the possible molecular mechanisms using wild type (WT) and Irf2bp2 knockout (KO) mice. The results indicated that HFD-increased body weight of mice was further elevated by Irf2bp2-knockout. In addition, Irf2bp2-deletion accelerated HFD-induced metabolic syndrome, as evidenced by the promoted fasting glucose and insulin levels. In the results of behavioral measurements, Irf2bp2-knockout intensified cognitive deficit in HFD-fed mice by using Y-maze, passive avoidance, and morris water maze (MWM) tests. Further, Irf2bp2-deficiency accelerated the activation of astrocytes and microglia cells, as evidenced by the promoted expressions of glial fibrillary acidic protein (GFAP) and Iba-1 in hippocampus and hypothalamus of HFD-fed mice. HFD for 16 weeks induced oxidative stress in serum and brain of mice, as proved by the up-regulated malondialdehyde (MDA) levels and down-regulated superoxide dismutase (SOD) activity, which were significantly enhanced due to Irf2bp2 knockout. Moreover, HFD-triggered systematic and central nervous inflammation by increasing the release of interleukin 1β (IL-1β) and tumor necrosis factor (TNF)-α, accompanied with elevated p-nuclear factor-κB (NF-κB) expressions. Notably, HFD-induced inflammation was significantly exacerbated by Irf2bp2 deletion. Intriguingly, HFD-induced dyslipidemia in liver of mice was further aggravated by Irf2bp2 suppression. Our in vitro results verified the effects of Irf2bp2-inhibition on the promotion of inflammatory response in BV2 cells and lipid dysfunction in primary hepatocytes. Therefore, the findings above suggested that inhibiting Irf2bp2 expression provided a potential therapeutic approach for the prevention of metabolic syndrome-associated central nervous injury.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Evaluation of adsorption and mechanical strength of 13X zeolite mixtures with phyllosilicate binders using molecular dynamics simulation and positron annihilation spectroscopy

There is growing interest in developing zeolites with novel internal structures that have optimal adsorptive capacity and high mechanical strength, while offering advantages, such as being light weight. We integrate computational and experimental methods to explore the effect of binder/zeolite types, and weight percentages on the mechanical strength of 13X zeolite and adsorption capacities of N 2 , H 2 O, and CO 2 for additive manufacturing (AM) applications with the goal of maximizing both adsorption and strength. Zeolite 13X mixtures and phyllosilicate binders (either bentonite or kaolin) are combined using molecular dynamics (MD) simulations to create structures with various binder/zeolite weight percentages. Further, adsorption capabilities and mechanical strength are assessed using the grand canonical Monte Carlo (GCMC) and ReaxFF modules, respectively. Our modeling shows that an optimized zeolite/binder ratio for N 2 adsorption is around 15 wt% for kaolin and roughly 10 wt% for bentonite. The resulting parameters can be applied to facilitate macro-scale computational fluid dynamics (CFD) and finite element method (FEM) simulations of an AM zeolite structure. We also performed Positron Annihilation Lifetime Spectroscopy (PALS) measurements on zeolite samples to explore the effect of changes in the internal volume. The results show an inverse relationship between the free volume and the solid loading and adding a binder changes the morphology of the zeolite-binder compound and decreases open-volume area significantly.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Palliative Radiation Therapy for Advanced Head and Neck Carcinomas: A Phase 2 Study

Purpose: Incurable head and neck cancer is hard to manage with usual palliative care. Radiation therapy (RT) in this setting is sometimes omitted because there is an apprehension that the side effects in the head and neck region might counterbalance the benefits. The objective of this phase 2 study was to evaluate whether highly conformal RT could improve the therapeutic ratio with this comprehensive Quality of Life (QOL) and toxicity evaluation. Methods and Materials: Patients from 2 academic centers, deemed unfit for radical treatment because of their poor medical condition or advanced cancer stage by an experienced tumor board, were offered 25 Gy in 5 daily intensity modulated RT fractions over 1 week to the symptomatic tumor volume. QOL was evaluated with the European Organization for Research and Treatment of Cancer QLQ-C15-PAL and QLQ-H&N35 questionnaires, and toxicities with the Common Terminology Criteria for Adverse Events version 4.0. Survival and time to tumor progression were calculated with the Kaplan-Meier method. Results: Thirty-two patients were recruited, of whom 66% had at least T4, N3, or M1 disease. The QOL questionnaires completion rate was 86%. Eighty-eight percent of patients received the planned dose. The median overall survival and progression-free survival times were, respectively, 6.5 and 3.2 months. No grade 4 or 5 toxicity was seen. Only 13% of patients had any grade 3 toxicities, and 17% of patients reported no toxicity at all. The QOL was equal or improved, and head and neck symptoms remained equal to or lower than the baseline values for most patients at up to 6 months. Eighty-five percent of patients would have chosen to receive this RT regimen again when asked. Conclusions: This palliative RT regimen was highly tolerable and effective in preserving or improving self-reported QOL in most patients for up to 6 months, which corresponds to this population's median overall survival. Given the minimal side effects, intensification could be considered to achieve longer locoregional control.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2016

Effects of quench rate and natural ageing on the age hardening behaviour of aluminium alloy AA6060

Quench sensitivity in Al–Mg–Si alloys has been largely attributed to the solute loss at the heterogeneous nucleation sites, primarily dispersoids, during slow cooling after extrusion. As such, the number density of dispersoids, the solute type and concentration are considered to be the key variables for the quench sensitivity. In this study, quench sensitivity and the influence of natural ageing in a lean Al–Mg–Si alloy, AA6060, which contains few dispersoids, have been investigated by hardness measurement, thermal analysis, transmission electron microscopy (TEM) and positron annihilation lifetime spectroscopy (PALS). It is shown that the quench sensitivity in this alloy is associated with the degree of supersaturation of vacancies after cooling. Due to vacancy annihilation and clustering during natural ageing, the quench sensitivity is more pronounced after a short natural ageing time (30 min) compared to a longer natural ageing time (24 h). Therefore, prolonged natural ageing not only leads to an increase in hardness, but can also have a positive effect on the quench sensitivity of lean Al–Mg–Si alloys. - Highlights: • Significant quench sensitivity observed in AA6060 alloy after 30 min natural ageing • Prolonged natural ageing increased hardness and reduced QS. • Low dispersoid density leads to insignificant QS from non-hardening precipitates. • Vacancy supersaturation identified as a contributor to QS.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Synthesis and characterization of aluminophosphate glasses with unique blue emission

Highlights: • Unique blue emission from aluminophosphate glass due to the phosphorus defect. • Tune the blue emission intensity by addition of SiO{sub 2}, ZnF{sub 2}, or Li{sub 2}O to the base glass. • Study the structural defects in the glass by PALS. • Energy transfer from phosphorus defect to Mn{sup 2+} in Mn-doped aluminophosphate glass. - Abstract: The aluminophosphate glasses were prepared by the melting-quenching technique and their optical and structural properties were investigated. The 56P{sub 2}O{sub 5}-20Al{sub 2}O{sub 3} glass exhibits unique blue emission at 406 nm due to the phosphorus defect in the glass matrix. Addition of SiO{sub 2}, ZnF{sub 2}, or Li{sub 2}O to 56P{sub 2}O{sub 5}-20Al{sub 2}O{sub 3} glass matrix has different influence on formation of phosphorus defect resulting in different intensities of blue emission at 406 nm, though SiO{sub 2}, ZnF{sub 2} or Li{sub 2}O mostly enters the glass network as modifier. Structural analysis of P{sub 2}O{sub 5}-Al{sub 2}O{sub 3} based aluminophosphate glasses by positron annihilation lifetime spectroscopy indicates that values of positron lifetimes and the corresponding intensities may be connected with the sizes and number of structural defects. Under excitation of 251 nm, a broad blue emission band and a red emission band were observed in the Mn-doped 56P{sub 2}O{sub 5}-20Al{sub 2}O{sub 3}-15SiO{sub 2}-10ZnF{sub 2} glass, indicating the operation of energy transfer from the phosphorus defect to octahedrally coordinated Mn in the glass host.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Structural, optical and photocatalytic properties of zinc oxides obtained from spent alkaline batteries

Highlights: • Zinc oxides were synthetized using spent alkaline batteries as raw materials. • Both prepared samples present the wurzite structure and exhibits good optical properties. • The decrease in lattice parameters and the narrow band gap are associated with the formation of oxygen vacancies. • Recovered zinc oxides were active for photodegradation of methylene blue by UV irradiation. • The photocatalytic was correlates to the bulk/surface defects ratio. - Abstract: The structural, optical and photocatalytic properties of two zinc oxides prepared from spent alkaline batteries were analysed. After leaching the anode of alkaline batteries, zinc was precipitated from the leachate liquor by introducing oxalic acid (O-ZnO) or sodium carbonate (C-ZnO). The structure of ZnO samples were analysed by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), S{sub BET}, DRS-UV-vis spectroscopy and positron annihilation lifetime spectroscopy (PALS). Both oxides present the ZnO wurzite structure and similar morphology. C-ZnO presents a cell lower lattice parameters and bang gap energy (2.99 eV) than O-ZnO (3.05 eV), possibly due to higher concentration of oxygen vacancies. The photocatalytic activity in the degradation of methylene blue (MB) of O-ZnO (achieving 70% MB degradation at 90 min) was superior to C-ZnO, due to its higher surface area and degree of crystallinity and lower bulk/surface defects ratio.

36 MATERIALS SCIENCE↗