Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “O”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Effects of mechanically alloying Al 2 O 3 and Y 2 O 3 additives on the liquid phase sintering behavior and properties of SiC

In order to improve the sintering of SiC, mixtures of Al 2 O 3 and Y 2 O 3 powders are commonly included as sintering additives. The aim of this work was to use mechanically alloyed Al 2 O 3 –Y 2 O 3 mixtures as sintering additives to promote liquid phase sintering of SiC using spark plasma sintering. The results showed that milling reduced the particle size of the powders and led to the formation of complex oxide phases (YAP, YAM, and YAG) at low temperatures. As the ball milling time increased, the mass loss of specimens sintered with mechanically alloyed Al 2 O 3 –Y 2 O 3 mixtures decreased, and accordingly the relative density increased. However, the hardness and flexural strength of sintered SiC specimens first increased and then decreased. Because the specimens prepared with oxides milled for a long time contained too much YAG/YAP and accordingly too much liquid at sintering temperature. This negatively affected the mechanical properties of the SiC specimens because of the increased volume of the complex oxide phases, which have inferior mechanical properties to SiC, in the sintered specimens. In conclusion, when the ball milling time was 6h, the hardness (24.02 GPa) and flexural strength (655.61 MPa) of the SiC specimens reached maximum values.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Time dependent chlorination of CeO 2 , La 2 O 3 and Nd 2 O 3 by ZrCl 4 dissolved in eutectic LiCl–KCl

Partial chlorination of CeO 2 , La 2 O 3 , and Nd 2 O 3 was achieved using ZrCl 4 dissolved in molten LiCl-KCl at 450°C over a period of 4-5 hr. ZrCl 4 was pre-volatilized into an argon stream to maintain a constant vapor pressure for equilibration with the salt. This approach was effective at maintaining the ZrCl 4 concentration at the solubility limit of 1.3 mol% in the molten salt throughout the duration of two of the chlorination experiments and within about 60% of the solubility limit in the third experiment. Based on the analysis of salt samples, fractional conversion after four hours of reaction for CeO 2 , and five hours for La 2 O 3 , and Nd 2 O 3 were calculated to be 0.97, 0.28, and 0.65 respectively. Assuming a shrinking core diffusion-limited model, the diffusivity of ZrCl 4 through the hypothesized ZrO 2 layer was calculated for the chlorination of CeO 2 , La 2 O 3 , and Nd 2 O 3 were 1.76 x 10 -10 cm 2 /sec, 7.85 x 10 -12 cm 2 /sec, and 7.42 x 10 -12 cm 2 /sec, respectively. Given the extremely low values calculated for diffusivity, it was concluded that the process is chemical reaction rate limited and that a complete reaction of each rare earth oxide could be achieved. Furthermore, a chemically controlled shrinking core model was shown to also fit the experimental data closely.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Optimizing feed modulation for coupled methane and NO x conversion over Pd-Pt/Mn 0.5 Fe 2.5 O 4 /Al 2 O 3 monolith catalyst

Here the impacts of feed modulation (frequency, amplitude) and catalyst design (composition and architecture) parameters are reported for the conversion of methane and NO x over a dual-layer Pt+Pd/Al 2 O 3 + Mn 0.5 Fe 2.5 O 4 /Al 2 O 3 monolith. CH 4 and NO x conversion data show that the dual-layer catalyst outperforms single-layer samples having the same catalyst loadings, with and without spinel. Close proximity of the PGM and MFO functions in the mixed-layer catalyst lowers the CH 4 conversion at high temperature while separating the PGM and spinel layers with an intermediate Al 2 O 3 layer does not. Methane conversion enhancement is linked to its nonmonotonic dependence on O 2 . The performance gains are tied to a transient activity spike that occurs during the lean-to-rich feed transition when water is present in the feed. The transient spike is attributed to the removal of CO and H 2 products via reactions with stored O 2 in the spinel, eliminating inhibition of methane steam reforming.

03 NATURAL GAS↗
DOE OSTI2024

An experimental, theoretical and kinetic modeling study of the N 2 O-H 2 system: Implications for N 2 O + H

The reaction of N 2 O with His the key step in consumption of nitrous oxide in thermal processes. The major product channel is N 2 + OH, while NH + NO constitute minor products. In addition, a pathway involving HNNO, initiated by N 2 O + H (+M)$\rightleftarrows$HNNO (+M) (R3, R4), has been inferred from experiment and theory by Burke and coworkers. At longer reaction times, the reaction may reach partial equilibration, and in addition to k 3 and k 4 the importance of this channel depends on the thermodynamic properties of HNNO and its consumption reactions, mainly HNNO + H. In the present work, we re-examined the thermochemistry of HNNO and calculated rate constants and branching fractions for the HNNO + H reaction. Experiments on the N 2 O-H 2 system were conducted in a high-pressure flow reactor at 100 atm as a function of temperature (600-925 K) and stoichiometry and explained in terms of an updated chemical kinetic model. The results support the importance of the HNNO pathway, which results in inhibition of N 2 O consumption and formation of NH 3 . In addition, selected literature results on the N 2 O-H 2 system are re-examined and the implications for the other product channels of N 2 O + H, in particular NH + NO, are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Local Structural Disorder in Metavanadates MV 2 O 6 (M = Zn and Cu) Synthesized by the Deep Eutectic Solvent Route: Photoactive Oxides with Oxygen Vacancies

Metavanadates MV 2 O 6–δ (M = Zn and Cu) are synthesized by using a deep eutectic solvent (DES), a mixture of hydrogen bond donor and acceptor, as a reaction medium. Dissolution of stable binary metal oxides in a DES followed by a heat treatment yields phase-pure vanadates. According to in situ powder X-ray diffraction, ternary phases (α-Zn 2 V 2 O 7 and β-Cu 2–x V 2 O 7 , x ~ 0.27) are intermediates in the reaction pathway taken. Identifying a polymorphic phase transformation temperature for CuV 2 O 6 as well as the narrow temperature range between formation and decomposition for both metavanadates allows for tackling the challenge of the synthesis of these materials. The oxygen vacancy introduced by the DES route is accompanied by the formation of reduced V 4+ and Cu + in the oxide matrix, based on X-ray photoelectron spectroscopy. These oxygen vacancies modify the vibrational modes in the corresponding Raman spectra and are also responsible for broad optical absorptions in the 1.8–1.1 eV range. The optical band gaps of the materials are found at 1.8 eV (CuV 2 O 6 ) and 2.2 eV (ZnV 2 O 6 ), approximately 0.1–0.3 eV below the values reported in the literature. The reduced band gaps and sub-band gap photon absorption are key features of the oxygen-deficient metavanadates. Surface photovoltage spectroscopy reveals that all the synthesized vanadates are n-type materials with electrons as the majority charge carriers, and photoelectrochemical measurements confirm photoanodic currents for methanol oxidation. Furthermore, these results provide insight into the synthesis and structure–property relationship of the metavanadates for their potential use as photoanodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The Deep Eutectic Solvent Precipitation Synthesis of Metastable Zn 4 V 2 O 9

A precipitation method involving a deep eutectic solvent (DES)–a mixture of hydrogen bond donor and acceptor–is used to synthesize a ternary metal oxide. Without toxic reagents, precipitates consisting of Zn 3 (OH) 2 V 2 O 7 ·nH 2 O and Zn 5 (OH) 6 (CO 3 ) 2 are obtained by simply introducing deionized H 2 O to the DES solution containing dissolved ZnO and V 2 O 5 . Manipulation of the synthetic conditions demonstrates high tunability in the size/morphology of the two-dimensional nanosheets precipitated during the dynamic equilibrium process. According to differential scanning calorimetry and high-temperature powder X-ray diffraction, Zn 3 V 2 O 8 and ZnO obtained by the annealing of the precipitate are intermediates in the reaction pathway toward metastable Zn 4 V 2 O 9 . Intimate mixing of the metal precursors achieved by the precipitation method allows access to the metastable zinc-rich vanadate with unusually rapid heat treatment. Furthermore, the UV–vis and surface photovoltage spectra reveal the presence of sub-band gap states, stemming from the reduced vanadium (V 4+ ) center. Photoelectrochemical measurements confirm weak photoanodic currents for water and methanol oxidation. For the first time, this work shows the synthesis of a metastable oxide with the DES-precipitation route and provides insight into the structure–property relationship of the zinc-rich vanadate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Theoretical Investigation of the Hydrogenation of Cyclohexene Catalyzed by Supported Single-Atom Sites on Redox Noninnocent LiMn 2 O 4 and Li 2 Mn 2 O 4 Surfaces

Here, the tuning of catalyst activity via stereoelectronic modulation of the active-site structure remains a grand challenge in heterogeneous catalysis. In homogeneous catalysis, the redox noninnocent ligands can be introduced to organometallic fragments to donate electrons to the metal center and fine-tune the catalytic activity. Analogously, lithium-ion battery materials, such as lithium manganese oxide (LMO), lithium titanium oxides (LTO), etc., can serve as redox noninnocent catalyst support to modulate the electronic structures of the active site via lithiation, hence tuning the catalytic activity of supported active sites. Experimentally, the Ni single-atom site was supported on LiMn 2 O 4 via oxidative grafting and exhibited no catalytic activity toward the hydrogenation of cyclohexene. After introducing additional Li into the catalyst support forming Li 2 Mn 2 O 4 , the Ni single-atom site becomes active, with the catalytic rates increasing as a function of the lithiation for Li/Mn ratios >0.9. In this paper, density functional theory (DFT) calculations are performed to study the Ni site structure via X-ray absorption near edge structure (XANES) simulations and investigate the electronic properties of Ni single-atom site before and after the addition of intercalated lithium in the LMO spinel structure. Furthermore, the study of the reaction mechanism is also carried out to understand the thermodynamically and kinetically favored pathways. XANES simulation suggests that the Ni single-atom site is likely to stay in the Li channel of the spinel support structure and form an octahedral structure. After Li intercalation, the Ni site becomes less positively charged, indicating the partial reduction of the Ni site. The simulated reaction energy profile over the LiMn 2 O 4 support exhibits high-energy barriers (1.07 eV) for the hydrogenation of cyclohexene; however, the Li 2 Mn 2 O 4 support is able to better stabilize low-coordinated ion sites and improve ion mobility, leading to lower overall energy barriers (0.64 eV). The reduced and low-coordinated ion site, thus, can better stabilize the reaction intermediates and promote hydrogenation reaction. Similarly, other transition metal ions (Fe, Co, and Cu) are also considered over the LiMn 2 O 4 and Li 2 Mn 2 O 4 catalyst supports for hydrogenation reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗