Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Numerical simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Quantitative Voltammetry Measurements of High-Concentration Actinides in Molten Chloride Fuel Salts

Molten chloride mixtures containing high concentrations of UCl 3 (i.e., >70 wt%) are candidates for next-generation molten salt reactor (MSR) fuel salts that enable new plant optimization and fuel cycle strategies. MSR licensing, however, is contingent on the development of effective material control and accounting (MC&A) practices for these salts. To close this gap, we have developed an electroanalytical approach that enables accurate in situ measurements of uranium concentrations in these highly loaded fuel salts. This methodology uses a multielectrode array voltammetry sensor combined with digital simulations that account for non-idealities such as uncompensated resistance effects. The theory-based numerical simulations of voltammetry responses yielded correction factors that are agnostic of electrochemical cell geometry and produced consistent voltammetry peak current results when correcting for varying amounts of ohmic resistance. In doing so, we have demonstrated accurate concentration measurements for UCl 3 in LiCl-KCl-UCl 3 across a range of mass fractions between 55 and 72.3 wt% at 550 °C.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Sensitivity of the Shallow‐To‐Deep Convective Transition to Moisture and Wind Shear in the Amazon

Deep convection is the primary influence on weather and climate in tropical regions. However, understanding and simulating the shallow‐to‐deep (STD) convective transition has long been challenging. Here, we conduct high‐resolution numerical simulations to assess the environmental controls on the evolution of isolated convection in the Amazon during the wet season. The large‐scale forcing derived through a constrained variational analysis approach for the GoAmazon2014/5 Experiment is used in the simulations. Through sensitivity experiments, we examine the relative importance of moisture and wind shear in controlling the shallow‐to‐deep convective transition for isolated convective events. Convection exhibits the greatest sensitivity to humidity within the lowest 1.5 km, where a 4 mm reduction in column water vapor nearly suppresses ice water formation on deep convective days. In contrast, a reduction in column water vapor in the free troposphere by a factor of two or more is necessary to produce a comparable impact on convection. Increasing low‐level wind speed from 6 to 9 m s -1 enhances afternoon deep convection, raising the cloud ice mixing ratio by approximately 25%. Conversely, upper‐level wind shear reveals the weakest correlation with daytime convection in our simulations. Our results help characterize the role of moisture and wind shear on the STD transition and our understanding of the underlying mechanisms.

environmental controls↗
DOE OSTI2025

Observation and Simulation of Methane Plumes During the Morning Boundary Layer Transition

Abstract Methane (CH 4 ) contributes significantly to global warming. However, accurate identification of CH 4 sources for reducing CH 4 emissions is often hampered by inadequate accuracy and spatiotemporal coverage of CH 4 detection, and lack of accurate CH 4 forward modeling used in top‐down inversion systems. In this study, a field experiment was conducted in Pampa, Texas using two CH 4 sensors (LI‐COR and OGI camera) to detect CH 4 releases. We investigated whether high‐resolution simulations using the Weather Research and Forecasting (WRF) model with greenhouse gases (WRF‐GHG) could accurately simulate the CH 4 plumes in the presence of evolving atmospheric boundary layer from sunrise to noon. CH 4 plumes showed substantial variation in time. At a release rate of ∼17.5 kg hr −1 , the maximum enhancement of CH 4 measured by LI‐COR was 2.6 ppm at sunrise (7:36 a.m.), 250 m from the release location. Within half an hour after sunrise, this enhancement decreased to 0.3–0.4 ppm. The enhancement was 0.2 ppm by 10:00 a.m. and further dropped to less than 0.1 ppm after 11:30 a.m. Due to the low temperature at sunrise, the OGI camera failed to detect the CH 4 plume. The WRF‐GHG large‐eddy simulation (LES) with 32 m grid spacing successfully reproduced these CH 4 enhancements. In situ measurements together with numerical simulations illustrate the impact of the transition from a stable boundary layer in the early morning to a convective boundary layer at noon on the dispersion of CH 4 plumes. Additionally, CH 4 plumes from a cattle farm in Oklahoma are briefly examined using the same modeling approach.

Hu, Xiao‐Ming [Center for Analysis and Prediction ↗
DOE OSTI2024

Data-Efficient Dimensionality Reduction and Surrogate Modeling of High-Dimensional Stress Fields

Tensor datatypes representing field variables like stress, displacement, velocity, etc., have increasingly become a common occurrence in data-driven modeling and analysis of simulations. Numerous methods [such as convolutional neural networks (CNNs)] exist to address the meta-modeling of field data from simulations. As the complexity of the simulation increases, so does the cost of acquisition, leading to limited data scenarios. Modeling of tensor datatypes under limited data scenarios remains a hindrance for engineering applications. Here, in this article, we introduce a direct image-to-image modeling framework of convolutional autoencoders enhanced by information bottleneck loss function to tackle the tensor data types with limited data. The information bottleneck method penalizes the nuisance information in the latent space while maximizing relevant information making it robust for limited data scenarios. The entire neural network framework is further combined with robust hyperparameter optimization. We perform numerical studies to compare the predictive performance of the proposed method with a dimensionality reduction-based surrogate modeling framework on a representative linear elastic ellipsoidal void problem with uniaxial loading. The data structure focuses on the low-data regime (fewer than 100 data points) and includes the parameterized geometry of the ellipsoidal void as the input and the predicted stress field as the output. The results of the numerical studies show that the information bottleneck approach yields improved overall accuracy and more precise prediction of the extremes of the stress field. Additionally, an in-depth analysis is carried out to elucidate the information compression behavior of the proposed framework.

artificial intelligence↗
DOE OSTI2025

Multiphysics simulation of recent experiments on alkali‐silica reaction expansion in reinforced concrete members

Alkali‐silica reaction (ASR) is an important degradation process that causes volumetric expansion and damage in concrete, and is affected significantly by the local temperature, moisture and stress conditions that often vary across the regions of a structure. Numerical simulation is essential to predict the progression and effects of ASR on the performance of structures. Because of the interactions between thermal and moisture transport and mechanical deformation, it is important for numerical models to represent all these physical phenomena and the coupling between them. Simulations of ASR in reinforced concrete (RC) structures are further complicated by the need to capture interactions between concrete and embedded reinforcing bars. Here, this paper describes the implementation of a scalable, coupled‐physics ASR model for simulating RC structures and assesses the ability of that model to predict ASR‐induced expansion in recent laboratory tests on RC block and beam specimens. These laboratory tests and the simulation approach were selected because of their applicability to RC structural‐scale simulations. This validation study helps builds confidence the ability of this approach to model ASR expansion in large, complex RC structures, which is a current high‐priority need.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Problem-tailored Simulation of Energy Transport on Noisy Quantum Computers

The transport of conserved quantities like spin and charge is fundamental to characterizing the behavior of quantum many-body systems. Numerically simulating such dynamics is generically challenging, which motivates the consideration of quantum computing strategies. However, the relatively high gate errors and limited coherence times of today's quantum computers pose their own challenge, highlighting the need to be frugal with quantum resources. In this work we report simulations on quantum hardware of infinite-temperature energy transport in the mixed-field Ising chain, a paradigmatic many-body system that can exhibit a range of transport behaviors at intermediate times. We consider a chain with L = 12 sites and find results broadly consistent with those from ideal circuit simulators over 90 Trotter steps, containing up to 990 entangling gates. To obtain these results, we use two key problem-tailored insights. First, we identify a convenient basis – the Pauli Y basis – in which to sample the infinite-temperature trace and provide theoretical and numerical justifications for its efficiency relative to, e.g., the computational basis. Second, in addition to a variety of problem-agnostic error mitigation strategies, we employ a renormalization strategy that compensates for global nonconservation of energy due to device noise. We discuss the applicability of the proposed sampling approach beyond the mixed-field Ising chain and formulate a variational method to search for a sampling basis with small sample-to-sample fluctuations for an arbitrary Hamiltonian. This opens the door to applying these techniques in more general models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Glaciation of mixed-phase clouds: insights from bulk model and bin-microphysics large-eddy simulation informed by laboratory experiment

Abstract. Mixed-phase clouds affect precipitation and radiation differently from liquid and ice clouds, posing greater challenges to their representation in numerical simulations. Recent laboratory experiments using the Pi Cloud Chamber explored cloud glaciation conditions based on increased injection of ice-nucleating particles. In this study, we use two approaches to reproduce the results of the laboratory experiments: a bulk scalar mixing model and large-eddy simulation (LES) with bin microphysics. The first approach assumes a well-mixed domain to provide an efficient assessment of the mean cloud properties for a wide range of conditions. The second approach resolves the energy-carrying turbulence, the particle size distribution, and their spatial distribution to provide more details. These modeling approaches enable a separate and detailed examination of liquid and ice properties, which is challenging in the laboratory. Both approaches demonstrate that, with an increased ice number concentration, the flow and microphysical properties exhibit the same changes in trends. Additionally, both approaches show that the ice integral radius reaches the theoretical glaciation threshold when the cloud is subsaturated with respect to liquid water. The main difference between the results of the two approaches is that the bulk model allows for the complete glaciation of the cloud. However, LES reveals that, in a dynamic system, the cloud is not completely glaciated as liquid water droplets are continuously produced near the warm lower boundary and subsequently mixed into the chamber interior. These results highlight the importance of the ice mass fraction in distinguishing the mixed-phase clouds and ice clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Score-Based Physics-Informed Neural Networks for High-Dimensional Fokker–Planck Equations

The Fokker-Planck (FP) equation is a foundational partial differential equation (PDE) in stochastic processes involving Brownian motions. However, the curse of dimensionality (CoD) poses a formidable challenge when dealing with high-dimensional FP equations. Although Monte Carlo simulation and (vanilla) Physics-Informed Neural Networks (PINNs) have shown the potential to tackle CoD, both methods exhibit significant numerical errors in high dimensions when dealing with the probability density function (PDF) associated with Brownian motion. The point-wise PDF values tend to decrease exponentially as dimensionality increases, surpassing the precision of numerical simulations and resulting in substantial errors. In addition, due to its massive sampling, Monte Carlo fails to offer fast sampling. Modeling the logarithm likelihood (LL) via vanilla PINNs transforms the FP equation into a notoriously difficult Hamilton-Jacobi-Bellman (HJB) equation, which is impractical for PINN learning, whose error grows rapidly with dimension. To this end, we propose a novel approach utilizing a score-based solver to fit the score function in stochastic differential equations (SDEs). The score function, defined as the gradient of the LL, plays a fundamental role in inferring LL and PDF and enables fast SDE sampling, offering an effective means to overcome the CoD. Three fitting methods, Score Matching (SM), Sliced Score Matching (SSM), and Score-PINN, are introduced, each contributing unique advantages in computational complexity, accuracy, and generality. The proposed score-based SDE solver operates in two stages: first, employing score matching or Score-PINN to acquire the score function; and second, solving the LL via an ordinary differential equation (ODE) using the obtained score function. Comparative evaluations across these methods showcase varying trade-offs. The proposed methodology is evaluated across diverse SDEs, including anisotropic Ornstein-Uhlenbeck processes, geometric Brownian motion, and Brownian motion with varying eigenspace. We also test various distributions, including Gaussian, Log-normal, Laplace, and Cauchy distributions. The numerical results demonstrate the score-based SDE solver’s stability, speed, and performance across different experimental settings, solidifying its potential as a solution to CoD for high-dimensional FP equations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Understanding Recombination Pathways of CdSeTe/CdTe Devices Using Temperature Dependence of Fill Factor

Understanding the temperature dependence of photovoltaic parameters is critical for identifying performance limiting mechanisms in CdTe-based solar cells. In this study, we investigate the temperature dependence of fill factor (FF(T)) in CdSeTe/CdTe solar cells using a combination of experimental current density-voltage (JV) measurements and numerical simulations. The measured FF(T) exhibits a nonlinear response with temperature, peaking at moderate temperature values (10–30°C). Through numerical modeling, we reveal that this peaking behavior in FF(T) arises when the dominant recombination mechanism transitions from bulk to interface with increasing temperature. This transition is primarily driven by low hole mobility (0.6–1.2 cm2/V·s), while electron mobility, interface recombination velocities, and carrier lifetime also contribute to the effect. Our findings demonstrate that FF(T) analysis is a promising diagnostic tool for distinguishing recombination pathways and guiding the optimization of thin-film CdTe solar cells under real-world conditions.

CdTe photovoltaics↗
DOE OSTI2025

JHTDB-wind: a web-accessible large-eddy simulation database of a wind farm with virtual sensor querying

This paper introduces JHTDB-wind (https://turbulence.idies.jhu.edu/datasets/windfarms, last access: 11 November 2025), a publicly accessible database containing large-eddy simulation (LES) data from wind farms. Building on the framework of the Johns Hopkins Turbulence Database (JHTDB), which hosts direct numerical simulation (DNS) and some LES datasets of canonical turbulent flows, JHTDB-wind stores the 4D space–time history of the flow and provides users the ability to access and query the data via a web-based virtual sensor interface. The initial dataset comprises LES results from a large wind farm with 10×6 turbines, modeled using a filtered actuator line method, under conventionally neutral atmospheric conditions. These data comprise 1 h (hour) of flow field data (velocity, pressure, potential temperature deviation, subgrid-scale (SGS) eddy viscosity, and turbine forces, approximately 15 TB (terabytes) and wind turbine data – including both turbine-level operational quantities and blade-level aerodynamic quantities (approximately 1.3 TB) – stored in Zarr and Parquet formats, respectively. Data retrieval is facilitated by the giverny Python package, allowing remote users to query the database in Python or MATLAB (C and Fortran support are available for flow field data). This paper details the simulation setup and demonstrates data access through examples that analyze wind farm flow structures and turbine performance. The framework is extensible to future datasets, including the JHTDB-wind diurnal cycle simulation analyzed in Xiao et al. (2025).

17 WIND ENERGY↗
DOE OSTI2025

A High-Order Discontinuous Galerkin Spectral Element Method for Compressible Reacting Flows

High-order methods have recently been shown to be an effective tool for high-fidelity flow computations like direct numerical simulations and large eddy simulations due to their strong balance between accuracy and computational cost. In this work, a high-order discontinuous Galerkin spectral element method (DGSEM) is developed to solve the chemically reactive Euler equations encountered in high-speed combustion. To handle the disparate length and time scales associated with these equations, we develop a novel method which combines the spectral accuracy of the SEM with the flexibility of DG approach. Thus, the framework is well suited to capture turbulence in smooth regions of the flow, while maintaining numerical stability in the presence of shocks. The numerical method is implemented within the spectral element solver Nek5000. Validation cases are conducted for both non-reactive and reactive discontinuous flows to demonstrate the solver capability. In particular, canonical one-dimensional and two-dimensional detonation simulations are performed and the high-order numerical results are validated against available literature data.

computational fluid dynamics (CFD)↗
DOE OSTI2024

Modeling Microwave-Enhanced Chemical Vapor Infiltration Process for Preventing Premature Pore Closure

The chemical vapor infiltration (CVI) process involves infiltrating a porous preform with reacting gases that undergo chemical transformation at high temperatures to deposit the ceramic phase within the pores, ultimately leading to a dense composite. The conventional CVI process in composite manufacturing needs to follow an isothermal approach to minimize temperature differences between the external and internal surfaces of the preform, ensuring that reactive gases infiltrate internal pores before external surfaces seal. Here, this study addresses the challenge of premature pore closure in CVI processes through microwave heating. A frequency-domain microwave solver is developed in OpenFOAM to investigate volumetric heating mechanisms within the preform. Through numerical studies, we demonstrate the capability of microwave heating of creating an inside-out temperature inversion. This inversion accelerates reactions proximal to the preform center, effectively mitigating the risk of premature external pore closure and ensuring uniform densification. The results reveal a significant enhancement in temperature inversion when high-permittivity reflectors are incorporated to generate resonant waves. This microwave heating strategy is then coupled with high-fidelity direct numerical simulation (DNS) of reacting flow, enabling the analysis of resulting densification processes. The DNS includes detailed chemistry and realistic diffusion coefficients. The numerical results can be used to estimate the impact of microwave-induced temperature inversion on densification in productions.

42 ENGINEERING↗
DOE OSTI2025

A machine-learning approach to measure 3D sample properties from 2D Transmission Electron Microscopy images

Transmission Electron Microscopy (TEM) is a powerful tool for the characterization of materials at the nanoscale; however, its inherent two-dimensional (2D) nature poses significant challenges to accurately measure three-dimensional (3D) properties. We introduce a supervised machine-learning model that predicts 3D structural information, such as sample thickness and curvature, from a series of conventional 2D TEM images. The model, a U-Net convolutional neural network, is trained on a large synthetic dataset generated from dynamical diffraction simulations that model TEM’s complex, nonlinear image formation, accounting for sample thickness and curvature. This physically realistic framework enables exploration of a broad parameter space impractical to sample experimentally. We demonstrate that the trained model has accurate predictions for experimental single-crystal silicon samples, achieving performance comparable to established measurement techniques. This work highlights the critical role of robust, simulation-based training in overcoming the limitations of real-world imaging artifacts and inconsistent sample geometries. By integrating machine learning with numerical simulations, we offer an efficient and scalable framework for quantitative TEM analysis, paving the way for more sophisticated 3D characterization of complex materials.

Dynamical diffraction↗
DOE OSTI2025

Predicting nonequilibrium Green’s function dynamics and photoemission spectra via nonlinear integral operator learning

Understanding the dynamics of nonequilibrium quantum many-body systems is an important research topic in a wide range of fields across condensed matter physics, quantum optics, and high-energy physics. However, numerical studies of large-scale nonequilibrium phenomena in realistic materials face serious challenges due to intrinsic high-dimensionality of quantum many-body problems and the absence of time-invariance. The nonequilibrium properties of many-body systems can be described by the dynamics of the correlator, or the Green's function of the system, whose time evolution is given by a high-dimensional system of integro-differential equations, known as the Kadanoff–Baym equations (KBEs). The time-convolution term in KBEs, which needs to be recalculated at each time step, makes it difficult to perform long-time numerical simulation. In this paper, we develop an operator-learning framework based on recurrent neural networks (RNNs) to address this challenge. We utilize RNNs to learn the nonlinear mapping between Green's functions and convolution integrals in KBEs. By using the learned operators as a surrogate model in the KBE solver, we obtain a general machine-learning scheme for predicting the dynamics of nonequilibrium Green's functions. Besides significant savings per each time step, the new methodology reduces the temporal computational complexity from $O(N_t^3)$ to $O(N_t)$ where N t is the number of steps taken in a simulation, thereby making it possible to study large many-body problems which are currently infeasible with conventional KBE solvers. Through various numerical examples, we demonstrate the effectiveness of the operator-learning based approach in providing accurate predictions of physical observables such as the reduced density matrix and time-resolved photoemission spectra. Moreover, our framework exhibits clear numerical convergence and can be easily parallelized, thereby facilitating many possible further developments and applications.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Deep Multi-Agent Reinforcement Learning for Real-World Signalized Traffic Corridor Control

Signalized traffic control problem has been addressed recently with deep Reinforcement Learning (RL) approaches involving diverse state, action, and reward structures. While significant progress has been noted in the literature, open challenges still remain in the areas of adaptive signal phase timing, coordination in a multi-intersection corridor setting, and consideration of real-world traffic conditions. In the context of deep RL-based problem framing, extensions are needed that enable adaptive signal phase timings in an intersection agent's action space, computationally efficient information sharing among neighboring signalized intersection agents along a corridor, and experimentation in realistic simulation environments. In this paper, we develop a deep Advantage Actor Critic (A2C) multi-agent RL (MARL) approach capturing the research extensions above and apply it within a real-world calibrated Aimsun Next traffic corridor simulation model based on traffic data from the City of Coral Gables, Florida. For a multi-intersection corridor control setting, our numerical simulation experiments with a decentralized A2C MARL algorithm applied at different time periods led to a total average corridor travel delay reduction (expressed in seconds/mile averaged over vehicles) from 4.9% to 19.9% compared to state-of-the-art actuated control.

Shuvo, Salman S. [BATTELLE (PACIFIC NW LAB)]↗
DOE OSTI2024

Modeling a Strain and Piezo Potentials in an InAs/GaAs Quantum Dot

We investigated the single-electron spectrum of an InAs/GaAs quantum dot (QD) using an effective potential model developed in previous studies. Our objective was to explore the limits of applicability of this model. We conducted numerical simulations, introducing a piezoelectric potential as a perturbation to the effective potential. The profile of this additional potential was derived from theoretical numerical studies presented in the literature. We analyzed the impact of variations in this profile within the framework of the perturbation theory. Our findings indicate that within a variation range of 25%, the effective potential model remains applicable.

42 ENGINEERING↗
DOE OSTI2024

Self-similar Reynolds-averaged mechanical–scalar turbulence models for Rayleigh–Taylor mixing induced by power-law accelerations in the small Atwood number limit

Analytical self-similar solutions to two-, three-, and four-equation Reynolds-averaged mechanical–scalar turbulence models describing turbulent Rayleigh–Taylor mixing driven by a temporal power-law acceleration are derived in the small Atwood number (Boussinesq) limit. The solutions generalize those previously derived for constant acceleration Rayleigh–Taylor mixing for models based on the turbulent kinetic energy K and its dissipation rate ε, together with the scalar variance S and its dissipation rate χ [O. Schilling, “Self-similar Reynolds-averaged mechanical–scalar turbulence models for Rayleigh–Taylor, Richtmyer–Meshkov, and Kelvin–Helmholtz instability-induced mixing in the small Atwood number limit,” Phys. Fluids 33, 085129 (2021)]. The turbulent fields are expressed in terms of the model coefficients and power-law exponent, with their temporal power-law scalings obtained by requiring that the self-similar equations are explicitly time-independent. Mixing layer growth parameters and other physical observables are obtained explicitly as functions of the model coefficients and parameterized by the exponent of the power-law acceleration. Values for physical observables in the constant acceleration case are used to calibrate the two-, three-, and four-equation models, such that the self-similar solutions are consistent with experimental and numerical simulation data corresponding to a canonical (i.e., constant acceleration) Rayleigh–Taylor turbulent flow. The calibrated four-equation model is then used to numerically reconstruct the mean and turbulent fields, and turbulent equation budgets across the mixing layer for several values of the power-law exponent. Finally, the reference solutions derived here can be used to understand the model predictions for strongly accelerated or decelerated Rayleigh–Taylor mixing in the large Reynolds number limit.

42 ENGINEERING↗
DOE OSTI2024

A second-order-in-time, explicit approach addressing the redundancy in the low-Mach, variable-density Navier-Stokes equations

A novel algorithm for explicit temporal discretization of the variable-density, low-Mach Navier-Stokes equations is presented here in this study. Recognizing there is a redundancy between the mass conservation equation, the equation of state, and the transport equation(s) for the scalar(s) which characterize the thermochemical state, and that it destabilizes explicit methods, we demonstrate how to analytically eliminate the redundancy and propose an iterative scheme to solve the resulting transformed scalar equations. The method obtains second-order accuracy in time regardless of the number of iterations, so one can terminate this subproblem once stability is achieved. Hence, flows with larger density ratios can be simulated while still retaining the efficiency, low cost, and parallelizability of an explicit scheme. The temporal discretization algorithm is used within a pseudospectral direct numerical simulation which extends the method of Kim, Moin, and Moser for incompressible flow to the variable-density, low-Mach setting, where we demonstrate stability for density ratios up to ~25.7.

97 MATHEMATICS AND COMPUTING↗