Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nonuniform temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Magnetic correlations on the full chains of ortho-II YBa 2 ⁢Cu 3⁢ O 6.5

We propose that the NMR line shape on the chain Cu in the stoichiometric high-T c superconductor ortho-II YBa 2 ⁢Cu 3 ⁢O 6.5 is determined by the magnetization induced on Cu near O vacancies due to strong magnetic correlations in the chains. An unrestricted Hartree-Fock calculation of a coupled chain-plane Hubbard model with nearest-neighbor d-wave pairing interaction shows that the broadening of NMR lines is consistent with disorder-induced magnetization at low temperatures. In addition, we give a possible explanation of the anomalous bimodal line shape observed at high temperatures in terms of nonuniform Cu valence in the chains. The proximity between chains and CuO plane induces anisotropic magnetization on the planar Cu and broadens the plane NMR lines in accordance with that of the chain lines, in agreement with experiment. Here, we discuss implications of the model for other experiments on underdoped YBa 2 ⁢Cu 3⁢ O 7–δ .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal microwave emission from a random inhomogeneous layer over a homogeneous medium using the method of invariant imbedding

The paper studies thermal microwave emission from an inhomogeneous slab of a random medium, with possible nonuniform absorption, scattering, and temperature profiles, bounded by different dielectrics on both sides. The invariant imbedding method is used to cast the boundary value problem of the radiative transfer equations into an initial value problem at zero slab thickness. As a numerical example, the angular and polarization variations of brightness temperatures for ice over water are considered.

Tsang, L.↗

V/STOL status from the engine technology viewpoint

Directions for designs and powerplant configurations for V/STOL aircraft are explored. The Harrier is the only V/STOL aircraft in service, having performed for over 12 yr. Rolls-Royce has studied engines with powered lift separation from forward propulsion, and engines with composite lift/propulsion modes, resulting in concentration on vectored thrust using rotating or deflected nozzles. The necessity for higher combat performance creates a need for higher specific thrust for supersonic flight (Mach 2), which is achievable with plenum chamber burning. The core flows are exhausted through separate nozzle systems for independent control. Intake in a V/STOL follows a short path and results in nonuniform flow, and testing is described to account for the effects of nonuniform static pressures and temperatures.

Lewis, G. M.↗

Einstein observations of the Vela supernova remnant - The spatial structure of the hot emitting gas

Spatially resolved (aproximately 1 arcmin) X-ray maps of the Vela supernova remnant have been constructed in two spectral bands, 0.2-1.0 keV and 0.8-2.0 keV, from a series of 36 separate observations with the Imaging Proportional Counter of the Einstein Observatory. The maps exhibit substantial structure on all angular scales. Spectral analysis shows that the emission from the remnant can be consistently described as thermal radiation from hot gas which is nonuniform in density and temperature, but which is in approximate pressure equilibrium. It is found that p/k is approximately 3-4 x 10 to the 5th/cu cm K. The soft X-ray emission exhibits a high degree of correlation with the optical filamentary structure, in the sense that the most prominent filaments either tightly surround or are coincident with the brightest X-ray regions. This suggests that the softest X-radiation may originate in 'warm' gas which is evaporated from the denser clouds responsible for the optical and ultraviolet filaments. Such an interpretation is quantitatively investigated, and shown to be only marginally consistent with the observations.

Kahn, S. M.↗

A direct algorithm for convective adjustment of the vertical temperature profile for an arbitrary critical lapse rate

An efficient direct algorithm of convective adjustment for an arbitrary critical value of the vertical temperature lapse rate gamma is proposed. The algorithm provides an exact and unique solution of a standard convective adjustment problem for models with temperature specified either on nonuniformly spaced levels or for layers of different thicknesses in pressure, sigma, or other vertical coordinate related to pressure. The algorithm may be recommended for use either directly in atmospheric models not explicitly including a hydrologic cycle with prescribed gamma, or as a part of more complicated parameterizations of moist convection, where gamma may be calculated depending on relative humidity.

Akmaev, Rashid A.↗

Variability of Neptune's 12.2-micron ethane emission feature

It is presently shown that the ratio of ethane emission to methane emission in Neptune's 7-14 micron spectrum increased by a factor of 1.47 +/- 0.11 in the period between 1985 and 1991, and that the 12.2-micron ethan feature (rather than that of methane at 7.7 microns) is implicated in the greater part of that change. It is speculated that this variation is due either to a nonuniform increase in stratospheric temperature, or (more likely) to an increase in the ethane concentration by over 15 percent.

Hammel, H. B.↗

Determination of boundary shape of cooled porous region

The shape of a cooled porous wall section is found that will provide a uniform surface temperature, as dictated by material limitations, when the surface is subjected to spatially nonuniform heating. In the analysis, local temperatures and pressures in the porous material are expressed in terms of a potential function. From the imposed thermal conditions, this potential function is governed by the dual constraints of both its value and its normal derivative being specified along the heated surface. The unknown shape of this surface is obtained by meeting these dual conditions. The analytical method uses a generalized conformal mapping procedure that includes a curved boundary. The coolant flow can be compressible or incompressible, and its viscosity can depend on temperature.

Snyder, A.↗

Temperature trends in the midlatitude summer mesosphere

[1] Here, we have performed trend studies in the mesosphere in the period 1961–2009 with Leibniz-Institute Middle Atmosphere (LIMA) model driven by European Centre for Medium-Range Weather Forecasts reanalysis below approximately 40 km and adapts temporal variations of CO 2 and O 3 according to observations. Temperatures in the mesosphere/lower thermosphere vary nonuniformly with time, mainly due to the influence of O 3 . In this report we analyze the contribution of varying concentrations of CO 2 and O 3 to the temperature trend in the mesosphere. It is important to distinguish between trends on pressure altitudes, z p , and geometrical altitudes, zgeo, where the latter includes the effect of shrinking due to cooling at lower heights. For the period 1961–2009, temperature trends on geometrical and pressure altitudes can differ by as much as -0.9 K/dec in the mesosphere. Temperature trends reach approximately -1.3±0.11 K/dec at z p ~60 km and -1.8±0.18 K/dec at z geo ~70 km, respectively. CO 2 is the main driver of these trends in the mesosphere, whereas O 3 contributes approximately one third, both on geometrical and pressure heights. Depending on the time period chosen, linear temperature trends can vary substantially. Altitudes of pressure levels in the mesosphere decrease by up to several hundred meters. We have performed long-term runs with LIMA applying twentieth century reanalysis dating back to 1871. Again, trends are nonuniform with time. Since the late nineteenth century, temperatures in the mesosphere have dropped by approximately 5–7 K on pressure altitudes and up to 10–12 K on geometrical altitudes.

54 ENVIRONMENTAL SCIENCES↗

A comparison of laboratory measured temperatures with predictions for a spar/skin type aircraft structure

A typical spar/skin aircraft structure was heated nonuniformly in a laboratory and the resulting temperatures were measured. The heat transfer NASTRAN computer program was used to provide predictions. Calculated temperatures based on a thermal model with conduction, radiation, and convection features compared closely to measured spar temperatures. Results were obtained without the thermal conductivity, specific heat, or emissivity with temperature. All modes of heat transfer (conduction, radiation, and convection) show to affect the magnitude and distribution of structural temperatures.

Jenkins, J. M.↗

Effects of Tangential Edge Constraints on the Postbuckling Behavior of Flat and Curved Panels Subjected to Thermal and Mechanical Loads

A parametric study of the effects of tangential edge constraints on the postbuckling response of flat and shallow curved panels subjected to thermal and mechanical loads is presented. The mechanical loads investigated are uniform compressive edge loads and transverse lateral pressure. The temperature fields considered are associated with spatially nonuniform heating over the panels, and a linear through-the-thickness temperature gradient. The structural model is based on a higher-order transverse-shear-deformation theory of shallow shells that incorporates the effects of geometric nonlinearities, initial geometric imperfections, and tangential edge motion constraints. Results are presented for three-layer sandwich panels made from transversely isotropic materials. Simply supported panels are considered in which the tangential motion of the unloaded edges is either unrestrained, partially restrained, or fully restrained. These results focus on the effects of the tangential edge restraint on the postbuckling response. The results of this study indicate that tangentially restraining the edges of a curved panel can make the panel insensitive to initial geometric imperfections in some cases.

Lin, W.↗

Dispersion relation and instability for an anisotropic nonuniform flowing plasma

A generalized formula for wave instability is developed for an anisotropic nonuniform plasma with finite flows and temperatures. Six-moment fluid equations are solved to give the analytic expression for wave instability in arbitrarily nonuniform plasmas. The analytic formula explicitly states the dependence of wave instability on the nonuniformities of number density, flow velocity, and anisotropic or isotropic pressure. The accuracy of the formalism is verified by a numerical calculation of implicit dispersion relations in complex Fourier space. The analysis shows that nonuniformity plays a critical role in plasma instability, while the flow velocity and anisotropic pressures determine the growth rate of the instability. Lastly, the instability diagram and associated instability criterion for anisotropy-driven instability are introduced as applications of the formalism.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The inner region of the unstable boundary layer over hilly prairie for temperature and humidity

The analytical treatment of wind-speed, temperature, and humidity data above nonuniform surfaces is utilized to test the Monin-Obukhov similarity at the inner region of the atmospheric boundary layer. The data profiles are analyzed, and independent measurements of the surface fluxes of sensible heat and water vapor are incorporated into the analysis. It is shown that the mean profiles of the potential temperature and specific humidity can be described using the Monin-Obukhov similarity functions in an area with unstable conditions.

Brutsaert, Wilfried↗

Temperature control to reduce capacity mismatch in parallel-connected lithium ion cells

The temperature and capacity of individual cells affect the current distribution in a battery pack. Non uniform current distribution among parallel-connected cells can lead to capacity imbalance and premature aging. This paper develops models that calculate the current in parallel-connected cells and predict their capacity fade. The model is validated experimentally for a nonuniform battery pack at different temperatures. The paper also proposes and validates the hypothesis that temperature control can reduce capacity mismatch in parallel-connected cells. Three Lithium Iron Phosphate cells, two cells at higher initial capacity than the third cell, are connected in parallel. The pack is cycled for 1500 Hybrid Electric Vehicles cycles with the higher capacity cells regulated at 40 C and the lower capacity cell at 20 C. As predicted by the model, the higher capacity and temperature cells age faster, reducing the capacity mismatch by 48% over the 1500 cycles. A case study shows that cooling of low capacity cells can reduce capacity mismatch and extend pack life.

25 ENERGY STORAGE↗

Coulomb explosion of a heated cluster

Coulomb explosion of a charged, nonuniform, and spherically symmetric cluster with a finite ion temperature is investigated. The spatial distributions of the density and mean velocity of accelerated ions, as well as their energy spectra, are obtained and analyzed as functions of the initial temperature. It is shown that taking into account the finite ion temperature eliminates singularities emerging during a Coulomb explosion of a spatially nonuniform cold cluster due to multistream ion motion that arises after breaking the velocity profile of the cluster ions. The characteristic temperature is found above which the spatial distribution and energy spectrum of the expanding ions become regular.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reaction Pathways and Energy Consumption in NH 3 Decomposition for H 2 Production by Low Temperature, Atmospheric Pressure Plasma

Pathways for NH 3 decomposition to N 2 and N 2 H 4 by atmospheric pressure nonthermal plasma are analyzed using a combination of molecular beam mass spectrometry measurements and zero-dimensional kinetic modeling. Experimental measurements show that NH 3 conversion and selectivity towards N 2 formation scale monotonically with the specific energy input into the plasma with ~ 100% selectivity to N 2 formation achieved at specific energy inputs above 0.12 J cm −3 (3.1 eV (molecule NH 3 ) −1 ). The kinetic model recovers these trends, although it underpredicts N 2 selectivity at low specific energy input. These discrepancies can be explained by the underestimation of reaction rate coefficients for reactions that consume N 2 H x species in collisions with H radicals and/or radial nonuniformities in power deposition, gas temperature, and species concentrations that are not represented by the plug flow approximation used in the model. The kinetic model shows that N 2 formation proceeds through N 2 H x decomposition pathways rather than NH x decomposition pathways in low temperature, atmospheric pressure plasma. Higher selectivity toward N 2 production can be achieved by operating at higher NH 3 conversion and with a higher gas temperature. Furthermore, the high energy cost of NH 3 decomposition by atmospheric pressure nonthermal plasma found in this work (25–50 eV (molecule NH 3 converted) −1 ; 17–33 eV (molecule H 2 formed) −1 ) is a result of the energy requirement for electron-impact dissociation of NH 3 and the significant re-formation of NH 3 by three-body recombination reactions between NH 2 and H.

Nonthermal plasma↗

Spatial nonuniformity of electron energy in a microwave atmospheric-pressure microplasma

The characteristics of the electron energy in a microwave atmospheric-pressure argon microplasma are investigated by a spatially resolved optical emission spectroscopy. By adding tiny amount of xenon (<1 ppm) as tracer gas into the argon discharge, it is found that the spatial distribution of the electrons with energy >8.3 eV is quite different from that of the electrons with energy >11.5 eV. Spatial distribution of the population ratio between 4p and 5p levels of Ar atom is also determined. Furthermore, with a collisional-radiative model, it is found that the spatial variation of this population ratio is mainly attributed to the spatial nonuniformity of the effective electron temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Laser-Matter Interaction on Molten Pool Flow and Keyhole Dynamics

Laser-induced keyholing occurs in additive manufacturing and welding processes, but the keyhole dynamics have not been well understood. A multiphase and multiphysics numerical model is used to predict the keyhole shapes recorded in the experimental observations and to predict transient and nonuniform distributions of laser absorption, temperature, and flow velocity in the process. When compared against data from a state-of-the-art dynamic x-ray radiography technique, good agreement is found for the keyhole shapes and fluctuation of the gas-liquid interface, thereby validating the simulation method. A detailed discussion is then given to elucidate the effects of laser absorption on the dynamic behavior of the front and rear keyhole walls. In conclusion, a quantitative comparison of different driving forces on the keyhole is also given to evaluate their significance to the keyhole dynamics.

42 ENGINEERING↗

Large format long-wavelength infrared narrow-band, multi-band, and broad-band QWIP focal plane arrays

A 640x512 pixel, long-wavelength cutoff, narrow-band quantum well infrared photodetector focal pllay array, a four-band QWIP FPA in 4-16 um spectral region, and a broad-band QWIP FPA having 15.4 mum cutoff have been demonstrated. In this paper we discuss the detector designs, dark currents, quantum efficiencies, responsivities, detectivities, noise equivalent differential temperatures, the effect of FPA nonuniformity on performance, and the operabilities of these QWIP FPAs.

Mumolo, J. M.↗