SEARCH · Engineering Papers

Results for “Nonisothermal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

NASA NTRS1980

Thermal /Soret/ diffusion effects on interfacial mass transport rates

It is shown that thermal (Soret) diffusion significantly alters convective mass transport rates and important transition temperatures in highly nonisothermal flow systems involving the transport of 'heavy' species (vapors or particles). Introduction of the Soret transport term is shown to result in mass transfer effects similar to those of 'suction' and a homogeneous chemical 'sink'. It is pointed out that this analogy provides a simple method of correlating and predicting thermal diffusion effects in the abovementioned systems.

Rosner, D. E.↗

NASA NTRS1982

Non-isothermal effects on SO2 absorption by water droplets. I - Model development. II - Results and discussion

An analytic model of SO2 absorption in a falling water droplet is developed and a simulation of SO2 washout is performed. Nonisothermic effects on drop growth, droplet physical parameters, reaction rates, and multicomponent diffusion are treated in the model. The gas-liquid interface is assumed to be at equilibrium, and interfacial resistance is negligible. Raindrops are simulated as falling from a 2 km height through an atmospheric region containing SO2. The droplets decrease in size from evaporation and cooling, and their slightly basic pH aids SO2 absorption. The simulation indicates higher SO2 absorption at higher altitudes, and desorption may occur at ground level. Isothermal effects are concluded to be significant, and quantification of effects will depend on further modelling.

Reda, M.↗

NASA NTRS1981

Laminar free convection boundary layer heat transfer over non-isothermal surface

Accurate heat transfer results are provided for the case of nonisothermal objects. A steady, laminar, free convection boundary layer flow over two-dimensional or rotationally symmetrical bodies of nonuniform surface temperature situated in an ambient fluid of undisturbed temperature is considered analytically. The surface heat flux is given in terms of the Nusselt number and wall derivatives of universal functions for Prandtl numbers of 0.72 and 100 are provided. The method is shown to be valid up to a temperature/radius ratio of 130 deg.

Lin, F. N.↗

NASA NTRS1981

Collapse and fragmentation of rotating, adiabatic clouds

A numerical hydrodynamics code has been used to calculate the collapse of rotating, adiabatic clouds. The three-dimensional nature of the calculation allows the clouds to fragment in the dynamic collapse phase. Clouds with adiabatic exponent of 7/5 and initial cos(2 phi) density variations fragment into binary systems if the initial ratio of thermal to gravitational energy is small (about 0.05). Clouds with higher thermal energy, however, damp the density variation and form near-equilibrium ellipsoids, with ratios of rotational to gravitational energy less than the critical value for dynamic growth of nonaxisymmetry in Maclaurin spheroids. Even with an adiabatic pressure law, dynamic fragmentation of a collapsing cloud is possible, implying for star formation theory that the low thermal energy fragments produced in isothermal collapse calculations may undergo a subsequent dynamic fragmentation in the nonisothermal regime.

Boss, A. P.↗

NASA NTRS1982

Chemorheology of reactive systems: Finite element analysis

The equations which govern the nonisothermal flow of reactive fluids are outlined, and the means by which finite element analysis is used to solve these equations for the sort of arbitrary boundary conditions encountered in industrial practice are described. The performance of the computer code is illustrated by several trial problems, selected more for their value in providing insight to polymer processing flows than as practical production problems. Although a good deal remains to be learned as to the performance and proper use of this numerical technique, it is undeniably useful in providing better understanding of today's complicated polymer processing problems.

Douglas, C.↗

NASA NTRS1983

Simplified method for nonlinear structural analysis

A simplified inelastic analysis computer program was developed for predicting the stress-strain history of a thermomechanically cycled structure from an elastic solution. The program uses an iterative and incremental procedure to estimate the plastic strains from the material stress-strain properties and a simulated plasticity hardening model. The simplified method was exercised on a number of problems involving uniaxial and multiaxial loading, isothermal and nonisothermal conditions, and different materials and plasticity models. Good agreement was found between these analytical results and nonlinear finite element solutions for these problems. The simplified analysis program used less than 1 percent of the CPU time required for a nonlinear finite element analysis.

Kaufman, A.↗

NASA NTRS1983

On some flow characteristics of conventional and excited jets

Improved correlations of jet centerline velocity and static temperature decay data for convergent nozzles are developed. From these empirical correlations, a relationship was devised by which the static temperature decay for a nonisothermal jet plume can be determined from cold-flow jet centerline velocity decay data or prediction. This relationship is shown to apply as well to jet plumes for various nozzle shapes. It is assumed, by analogy, that this relationship also applies to acoustically excited jet plumes. Jet plume spreading with and without excitation is discussed. Finally, the radial velocity and temperature profiles for conventional and enhanced mixing jet flows are shown and their implication for excited flows is discussed.

Vonglahn, U. H.↗

NASA NTRS1984

A simplified method for elastic-plastic-creep structural analysis

A simplified inelastic analysis computer program (ANSYPM) was developed for predicting the stress-strain history at the critical location of a thermomechanically cycled structure from an elastic solution. The program uses an iterative and incremental procedure to estimate the plastic strains from the material stress-strain properties and a plasticity hardening model. Creep effects are calculated on the basis of stress relaxation at constant strain, creep at constant stress or a combination of stress relaxation and creep accumulation. The simplified method was exercised on a number of problems involving uniaxial and multiaxial loading, isothermal and nonisothermal conditions, dwell times at various points in the cycles, different materials and kinematic hardening. Good agreement was found between these analytical results and nonlinear finite element solutions for these problems. The simplified analysis program used less than 1 percent of the CPU time required for a nonlinear finite element analysis.

Kaufman, A.↗

NASA NTRS1984

Development of a simplified procedure for cyclic structural analysis

Development was extended of a simplified inelastic analysis computer program (ANSYMP) for predicting the stress-strain history at the critical location of a thermomechanically cycled structure from an elastic solution. The program uses an iterative and incremental procedure to estimate the plastic strains from the material stress-strain properties and a plasticity hardening model. Creep effects can be calculated on the basis of stress relaxation at constant strain, creep at constant stress, or a combination of stress relaxation and creep accumulation. The simplified method was exercised on a number of problems involving uniaxial and multiaxial loading, isothermal and nonisothermal conditions, dwell times at various points in the cycles, different materials, and kinematic hardening. Good agreement was found between these analytical results and nonlinear finite-element solutions for these problems. The simplified analysis program used less than 1 percent of the CPU time required for a nonlinear finite-element analysis.

Kaufman, A.↗

NASA NTRS1984

On some flow characteristics of conventional and excited jets

Von Glahn, U. H.↗

NASA NTRS1984

Angular momentum transfer by gravitational torques and the evolution of binary protostars

The efficiency of angular momentum transport by gravitational torques is investigated semianalytically for two idealized models. The first model, a rotating ellipsoid embedded within another ellipsoid, is compared with numerical results for the fission instability of a radpidly-rotating polytrope. The fission instability is aborted by the rapid transfer of angular momentum outward by gravitational torques. The global rates of angular momentum transfer by gravitational torques in rotating gas clouds such as the presolar nebula are shown to be comparable to the rates assumed to be appropriate for transfer by turbulent stresses. The second model is a binary system embedded within a rotating ellipsoid. The binary orbital angular momentum decreases significantly when the phase angle with the ellipsoid is constant; the binary separation may then decrease by a factor of 100 within about an orbital period. For a variable phase angle, little secular loss of orbital angular momentum occurs. Binaries which form in the isothermal regime of the theory of hierarchical fragmentation will not undergo orbital decay, whereas very close binaries composed of nonisothermal fragments may decay and merge into single objects.

Boss, A. P.↗

NASA NTRS1982

Dilution zone mixing studies

The objectives and status of a project to investigate various aspects of the jet in a confined cross flow problem are outlined. The experiments performed thus far dealt primarily with a single row of jets mixing into an isothermal flow in a constant cross section duct. Variations in the mixing were observed as a function of jet to mainstream momentum ratio, orifice size, and spacing. The current experiments examine perturbations of this problem characteristic to gas turbine combustion chambers, namely: flow area convergence, nonisothermal mainstream flow, and opposed in line and staggered injection. An empirical model was developed to describe the observed temperature distributions. The current interactive code provides a 3-D pictorial representation of the temperature, as given by these correlations, for any user specified downstream location, flow, and orifice parameters.

Holdeman, J. D.↗

NASA NTRS1985

Viscoplastic constitutive relationships with dependence on thermomechanical history

Experimental evidence of thermomechanical history dependence in the cyclic hardening behavior of some common high-temperature structural alloys is presented with special emphasis on dynamic metallurgical changes. The inadequacy of formulating nonisothermal constitutive equations solely on the basis of isothermal testing is discussed. A representation of thermoviscoplasticity is proposed that qualitatively accounts for the observed hereditary behavior. This is achieved by formulating the scalar evolutionary equation in an established viscoplasticity theory to reflect thermomechanical path dependence. To assess the importance of accounting for thermomechanical history dependence in practical structural analyses, two qualitative models are specified: (1) formulated as if based entirely on isothermal information; (2) to reflect thermomechanical path dependence using the proposed thermoviscoplastic representation. Predictions of the two models are compared and the impact the calculated differences in deformation behavior may have on subsequent lifetime predictions is discussed.

Robinson, D. N.↗

NASA NTRS1985

Spectral constraints on models of gas in clusters of galaxies

The HEAO 1A2 spectra of clusters of galaxies are used to determine the temperature profile which characterizes the X-ray emitting gas. Strong evidence of nonisothermality is found for the Coma, A85, and A1795 clusters. Properties of the cluster potential which binds the gas are calculated for a range of model parameters. The typical binding mass, if the gas is adiabatic, is 2-4E14 solar masses and is quite centrally concentrated. In addition, the Fe abundance in Coma is .26 + or - .06 solar, less than the typical value (.5) found for rich clusters. The results for the gas in Coma may imply a physical description of the cluster which is quite different from what was previously believed.

Henriksen, M. J.↗

NASA NTRS1984

Vibrational and rotational excitation of CO in comets Nonequilibrium calculations

Ultraviolet observations of atomic carbon in cometary comae show that carbon-bearing compounds must comprise a significant fraction (approximately equal to or greater than 10 percent) of the volatiles. One likely source is CO. This compound is an important constituent of at least some cometary nuclei, even though it may not be the ultimate source of atomic carbon in all comets. Feldman (1983) has suggested that the relative abundance of CO may be one of the few fundamental characteristics which distinguish one comet from another. The present investigation is, therefore, concerned with the vibrational and rotational excitation of the CO molecule in cometary comae. Two previously neglected factors are taken into account in the study. The fractional populations of CO as solutions to time-dependent differential equations are derived, and a nonisothermal and cold kinetic temperature profile for the inner coma is considered.

Chin, G.↗

NASA NTRS1985

A simplified method for elastic-plastic-creep structural analysis

Kaufman, A.↗

NASA NTRS1984

Crystallization of calcia-gallia-silica glasses

A thermal image furance is presently used to study the critical cooling rate for glass formation, and the kinetics of crystallization, of the compositions 18.4CaO-(81.6-X)Ga2O3-XSiO2, where X = 3, 6, 9, and 13.8. Crystallization was studied nonisothermally, and the data were analyzed in light of the Avrami (1939) equation. Critical cooling rate and crystallization activation energy are both found to decrease with increasing silica content, and the results obtained by the present technique are noted to agree with those obtained on the basis of differential thermal analysis measurements.

Ray, C. S.↗

NASA NTRS1984

Analysis of cure in composites processing

Finite element analysis is a general numerical tool for solving the field equations of engineering practice, and this paper demonstrates its use in modeling the nonisothermal cure of pultruded composite material. A very simple grid is used in this case to model a narrow strip of material, and this grid is then solved using a time-stepping transient algorithm to simulate the passage of the strip along the pultruder die. As time proceeds, heat is conducted into the strip from the heated boundaries at the die walls, and cure proceeds at a rate dependent on the local temperature. The computer model can be used to minimize the time needed for sufficient cure, and helps avoid such processing errors as undercure or thermal degradation.

Aylward, L.↗