SEARCH · Engineering Papers
Results for “Nanomaterial”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Computational approaches to delivery of anticancer drugs with multidimensional nanomaterials
Not Available
Quantitative evaluation of released nanomaterials from carbon nanotube epoxy nanocomposites during environmental exposure and mechanical treatment
Not provided.
Combustion synthesis of Eu 2 O 3 nanomaterials with tunable phase composition and morphology
Combustion reactions in europium nitrate – acetylacetone – 2-methoxyethanol solutions and gels were investigated to produce europium (III) oxide (Eu 2 O 3 ) nanocrystalline materials and thin films. Thermal analyses of solutions indicated that the 2-methoxyethanol solvent also acts as a fuel in the absence of acetylacetone. Adding acetylacetone increases the overall heat of the reaction. Thermal analysis results revealed that the slow oxidation of unburned hydrocarbon residues follows the primary combustion reaction. Time-temperature profile measurements of the bulk combustion synthesis process in air and nitrogen atmospheres enabled the extraction of the maximum reaction temperature and the heating and cooling rates in the combustion zone. Several direct correlations exist between measured combustion parameters and the phase composition of the products. Combustion in air results in mixed-phase cubic and monoclinic nanocrystalline Eu 2 O 3 . Increasing the acetylacetone concentration in solutions increases the synthesis temperature and decreases the quantity of cubic Eu 2 O 3 . Here, the reaction of solutions in a nitrogen atmosphere or diluted with Eu 2 O 3 provides control of the product phase composition and reduces the quantity of the monoclinic phase. Transmission electron microscopy imaging shows that the Eu 2 O 3 end products are highly porous aggregates of nanocrystalline particles. Electrospraying of reactive solutions onto different substrates followed by short annealing makes the preparation of Eu 2 O 3 materials with diverse morphologies possible.
Strategies for Post-Synthetic Functionalization of Mesoporous Carbon Nanomaterial Surfaces
Most widely used carbon-based materials feature a bulk framework tolerant of extreme pH and temperature conditions while maintaining physical robustness, electrical conductivity, and biological relevance due to its inherent nontoxicity. At the nanoscale, the study of porous carbons has been of interest because of the enhanced accessible surface area relative to nonporous analogues. The evolution of synthetic techniques has developed structural allotropes with tunable internal pore diameter averages spanning from sub-nanometer to micron-plus sizes. Within the mesopore range, surface chemical phenomena abide by a kinetic-limited ruleset (ignoring the effects of bulk diffusion, as they do not pertain to this size regime). Further, mesopores provide sufficient volume and surface area for hosting guest species, including metal nanoparticles (MNP), polymers, small organics, and enzymes. These two unique features of mesoporous carbon (MC) drive interest in surface modifications to create new physicochemical functionality to these systems and their hosted species. As a result, the evolution of surface modification techniques has been scattered to disparate niches across the literature. This review compiles the array of elegant methods by which these carbon systems are topically engineered.
Contact-dewatered cellulose nanomaterials for reinforced biopolymer composites
Not Available
Direct ink writing of shear exfoliated two-dimensional nanomaterial- elastomeric multifunctional nanocomposite
Direct ink writing (DIW) of polymer nanocomposites with high loadings of two-dimensional (2D) nanofillers (graphene and hexagonal boron nitride (hBN)) is challenging because of potential clogging, use of hazardous solvents, and agglomeration. Here, in this work, a shear exfoliation and sieving method to prepare DIW ink with high loading of nanofillers produced from low-cost bulk layered materials such as graphite and bulk hBN powder for successful DIW printing without the use of any solvents, binders, or plasticizers. The single-step exfoliation technique resulted in a composite with substantial layer reduction along the c-axis, as confirmed by SEM, TEM, XRD, and Raman analysis. Incorporating exfoliated graphene (40 wt%) increased viscosity by ∼6 orders of magnitude due to enhanced particle–matrix interactions, leading to pronounced yield stress behavior and a yield stress of approximately 1598 Pa, which enabled excellent shape retention during extrusion. Using the DIW technique, porous structures such as desalination membranes, self-sensing bone scaffolds, thermal management coating, and serpentine strain sensors were fabricated. When tested in a direct contact membrane distillation setup, the fabricated membrane demonstrated a promising permeate flux of 21.85 Lm −2 h −1 and a salt rejection of 74.3 %. The fabricated serpentine sensor exhibited stable signal variations under cyclic tensile loading, with a working range of 0–200 % strain and a maximum gauge factor of 43,735. A cell culture test using the printed bone scaffold demonstrated promising cell attachment and proliferation. The DIW printed hBN nanocomposite exhibited reversible shape change under heat, demonstrating potential 4D printing capability and efficient thermal management when exposed to high heat or flame.
Synthesis of high-surface-area mesoporous SnO2 nanomaterials using carbon template
Not Available
Nanomaterials Synthesis Discovery via Parallel Electrochemical Deposition
Not Available
Current Status on the Manufacturing of Nanomaterials for Proton Exchange Membrane Energy Systems by Vapor-Based Processes
Development of novel technologies for catalyst synthesis and membrane electrode assembly (MEA) fabrication is of primary importance for further improvement of the performance and economics of proton exchange membrane fuel cells (PEMFCs) and proton exchange membrane water electrolyzers (PEMWEs). While the traditional manufacturing methods are time-consuming, energy intensive, and require many processing steps, the new vapor-based methods provide many benefits including the development of improved catalysts and catalyst supports, deposition of uniform thin films, reduction of catalyst loading, and minimizing the number of manufacturing steps. Recent publications in the field identified spray pyrolysis, reactive spray deposition technology, chemical vapor deposition, and atomic layer deposition as advanced vapor-based catalyst synthesis and deposition methods used for fabrication of MEAs for PEMFCs and PEMWEs. Here, the MEAs fabricated via vapor-based processes have shown significant performance improvements in comparison to the state-of-the-art MEAs, which are attributed to better catalyst distribution, improved catalyst supports, and controlled, uniform catalyst layer microstructures. This review provides an overview of the vapor-based synthesis and deposition methods currently being used for the development of PEM-based devices. The advantages and disadvantages of these methods are critically compared and discussed while the outlook for future development is provided.
Anisotropic Gold Nanomaterial Synthesis Using Peptide Facet Specificity and Timed Intervention
Not Available
Titania Nanomaterials for Sarin Decomposition: Understanding Fundamentals
Not provided.