Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NEW CHALLENGES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Study on Conversion from an Existing Alternating Current Medium-Voltage Line to a Direct Current Line: A Case of Load or Source Expansion

Simultaneous increase of power generation through renewable systems and load due owing to the rapid growth in electrified road transportation systems, leads to new challenges in the design, operation, and protection of distribution-level electrical power systems. This paper addresses challenges related to the integration of new sources or loads to a distribution grid through long alternating current lines. The International Council on Large Electric Systems medium-voltage benchmark model developed for North America was used for simulation studies. Use cases were developed to illuminate the issues related to long alternating current lines and the usefulness of medium-voltage direct current lines in a distribution network.

Jaldanki, Sreenivasa↗

Key directions for research and development of superconducting radio frequency cavities

Radio frequency superconductivity is a cornerstone technology for many future HEP particle accelerators and experiments from colliders to proton drivers for neutrino facilities to searches for dark matter. While the performance of superconducting RF (SRF) cavities has improved significantly over the last decades, and the SRF technology has enabled new applications, the proposed HEP facilities and experiments pose new challenges. To address these challenges, the field continues to generate new ideas and there seems to be a vast room for improvements. In this paper we discuss the key research directions that are aligned with and address the future HEP needs.

43 PARTICLE ACCELERATORS↗

Current Trends in the Detection of Sociocultural Signatures: Data-Driven Models

The harvesting of behavioral data and their analysis through evidence-based reasoning enable the detection of sociocultural signatures in their context to support situation awareness and decision making. Harvested data are used as training materials from which to infer computational models of sociocultural behaviors or calibrate parameters for such models. Harvested data also serve as evidence input that the models use to provide insights about observed and future behaviors for targets of interest. The harvested data is often the result of assembling diverse data types and aggregating them into a form suitable for analysis. Data need to be analyzed to bring out the categories of content that are relevant to the domain being addressed in order to train or run a model. If, for example, we are modeling the intent of a group to engage in violent behavior using messages that the group has broadcasted, then these messages need to be processed to extract and measure indicators of violent intent. The extracted indicators and the associated measurements (e.g. rates or counts of occurrence) can then be used to train/calibrate and run computational models that assess the propensity for violence expressed in the source message. Ubiquitous access to the Internet, mobile telephony and technologies such as digital photography and digital video have enabled social media application platforms such as Facebook, YouTube, and Twitter that are altering the nature of human social interaction. The fast increasing pace of online social interaction introduces new challenges and opportunities for gathering sociocultural data. Challenges include the development of harvesting and processing techniques tailored to new data environments and formats (e.g. Twitter, Facebook), the integration of social media content with traditional media content, and the protection of personal privacy. As these and other challenges are addressed, a new wealth of behavioral data and data analysis methods becomes available that are shaping social computing as a strongly data-driven experimental discipline with an increasingly stronger impact on the decision-making process of groups and individuals alike. In this chapter, we review current advances and trends in the detection of sociocultural signatures. Specific embodiments of the issues discussed are provided with respect to the assessment of violent intent and sociopolitical contention. We begin by reviewing current approaches to the detection of sociocultural signatures in these domains. Next, we turn to the review of novel data harvesting methods for social media content. Finally, we discuss the application of sociocultural models to social media content, and conclude by commenting on current challenges and future developments.

Sanfilippo, Antonio P.↗

Challenges in the 1990's for astronaut training simulators

New challenges for the simulation community at the Johnson Space Center both in near and long terms are considered. In the near term, the challenges of supporting an increasing flight rate, maintaining operations while replacing obsolete subsystems, and incorporating forthcoming changes to the Space Shuttle are discussed, and focus is placed on a change of forward flight-deck instruments from electro-mechanical devices to electronic displays. Training astronauts for complex concurrent missions involving multiple spacecraft and geographically dispersed ground facilities is considered to be foremost of the long-term challenges, in addition to the tasks of improving the simulator reliability and the operational efficiency of the facilities.

Brown, Patrick M.↗

JPL's Approach for Helping Flight Project Managers Meet Today's Management Challenges

All across NASA project managers are facing tough new challenges. NASA has imposed increased oversight and the number of projects at Centers such as JPL has exploded from a handful of large projects to a much greater number of smaller ones. Experienced personnel are retiring at increasing rates and younger, less experienced managers are being rapidly promoted up the ladder. Budgets are capped, competition among NASA Centers and Federally Funded Research and Development Centers (FFRDCs) has increased significantly and there is no longer any tolerance to cost overruns. On top of all this, implementation schedules have been reduced by 25 to 50% to reduce run-out costs, making it even more difficult to define requirements, validate heritage assumptions and make accurate cost estimates during the early phases of the life-cycle.JPL's executive management, under the leadership of the Associate Director for Flight Projects and Mission Success, have attempted to meet these challenges by improving operations in five areas: (1) increased standardization, where it is judged to have significant benefit; (2) better balance and more effective partnering between projects and the line management; (3) increased infrastructure support; (4) improved management training; and (5) more effective review and oversight.

oversights↗

Proceedings of the Workshop on the Spectrophotometric Dating of Stars and Galaxies

In the past decade, we have seen an avalanche of new observational results from space observatories and ground-based observatories. These observations have revealed young globular clusters in the cores of merger galaxies, elliptical galaxies at redshifts up to z=1.5, and starburst galaxies at high redshift. Analyses of the detailed spectra or color- magnitude diagrams of these systems promise to give a new understanding of evolutionary processes and to provide a check on cosmological ages. At the same time, these new spectro-photometric data present new challenges to current methods of spectral analysis and modeling.At the Workshop, we will discuss these new opportunities and challenges on spectro-photometric dating of stars and galaxies.

Hubeny, Ivan↗

A Persistent Simulation Environment for Autonomous Systems

The age of Autonomous Unmanned Aircraft Systems (AUAS) is creating new challenges for the accreditation and certification requiring new standards, policies and procedures that sanction whether a UAS is safe to fly. Establishing a basis for certification of autonomous systems via research into trust and trustworthiness is the focus of Autonomy Teaming and TRAjectories for Complex Trusted Operational Reliability (ATTRACTOR), a new NASA Convergent Aeronautics Solution (CAS) project. Simulation Environments to test and evaluate AUAS decision making may be a low-cost solution to help certify that various AUAS systems are trustworthy enough to be allowed to fly in current general and commercial aviation airspace. NASA is working to build a peer-to-peer persistent simulation (P3 Sim) environment. The P3 Sim will be a Massively Multiplayer Online (MMO) environment were AUAS avatars can interact with a complex dynamic environment and each other. The focus of the effort is to provide AUAS researchers a low-cost intuitive testing environment that will aid training for and assessment of decisions made by autonomous systems such as AUAS. This presentation focuses on the design approach and challenges faced in development of the P3 Sim Environment is support of investigating trustworthiness of autonomous systems.

Kelley, Benjamin N.↗

Correlation between macro- and nano-scopic measurements of carbon nanostructured paper elastic modulus

Extensive work has been done in order to determine the bulk elastic modulus of isotropic samples from force curves acquired with atomic force microscopy. However, new challenges are encountered given the development of new materials constructed of one-dimensional anisotropic building blocks, such as carbon nanostructured paper. In the present work, we establish a reliable framework to correlate the elastic modulus values obtained by amplitude modulation atomic force microscope force curves, a nanoscopic technique, with that determined by traditional macroscopic tensile testing. In order to do so, several techniques involving image processing, statistical analysis, and simulations are used to find the appropriate path to understand how macroscopic properties arise from anisotropic nanoscale components, and ultimately, being able to calculate the value of bulk elastic modulus.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Passive Thermal Control Challenges for Future Exploration Missions

This slide presentation reviews the importance of developing passive thermal control for the future exploration missions envisioned in President Bush's call for human exploration of the Moon and Mars. Included in the presentation is a review of the conditions that make the thermal control very challenging on the Moon and Mars. With the future miniaturization of electronics components, power density and the associated challenges of electronics heat dissipation will provide new challenges. There is a challenge for improvement in modeling and analysis of thermal control systems, and for improved facilities to support testing of thermal-vacuum systems.

Rickman, Steven L.↗

The Impact of Behind-the-Meter Heterogeneous Distributed Energy Resources on Distribution Grids: Preprint

The increasing integration of distributed energy resources (DERs) on the electric grid brings new challenges and opportunities for utility grid operations. With the rapid deployment of DERs, there is emerging interest in integrating these controllable devices with utility operations at all levels for monitoring and management. Different types of DERs such as Photovoltaics (PV), energy storage, electric vehicles (EVs), etc. have varying effects on the grid based on how and where they are deployed. Again, the DER deployment and its impact are network-dependent, while the traditional electric grids were not designed to host DERs. To understand the challenges with increasing behind-the-meter (BTM) DERs and to identify the needs in deploying advanced controls, a comprehensive grid impact study is indispensable. This paper investigates the impacts of integrating a mix of DERs in the utility distribution network in Colorado, U.S. Firstly, BTM DERs at the residential scale including distributed PV; battery energy storage systems (BESS); heating, ventilation, and air-conditioning (HVAC) load; electric water heater (EWH) load; and EVs are modeled. The impacts of integrating these resources on the distribution network are evaluated by conducting time-series simulations for different scenarios considering different days to capture the worst-case conditions. Monte Carlo simulations are conducted to generate the realistic EV charging profile. The voltage issues, substation transformer loadings, and critical nodes in the network are identified with the incorporation of uncoordinated EV charging loads and other DER in the network. This analysis helps visualize the DER impact on the grid, identify the challenges, and provides an insight into the new distribution management and control needs to enable reliable and resilient distribution grid operations. Additionally, further analysis is performed to estimate the daily residential electricity cost with the inclusion of DERs under time-of-use tariffs. The result shows the daily residential electricity cost reduced by 20:7% on average with DERs compared to the case without DERs.

27 ARPA - Advanced Research Projects Agency-Energy↗

The Impact of Behind-the-Meter Heterogeneous Distributed Energy Resources on Distribution Grids

The increasing integration of distributed energy resources (DERs) on the electric grid brings new challenges and opportunities for utility grid operations. With the rapid deployment of DERs, there is emerging interest in integrating these controllable devices with utility operations at all levels for monitoring and management. To understand the challenges with increasing behind-the-meter (BTM) DERs and to identify the needs in deploying advanced controls, a comprehensive grid impact study is indispensable. This paper presents the analysis which help visualize the DER impact on the grid, identify the challenges and provides an insight into the new distribution management and control needs to enable reliable and resilient grid operations.

27 ARPA - Advanced Research Projects Agency-Energy↗

Integrated Avionics System (IAS)

As spacecraft designs converge toward miniaturization and with the volumetric and mass constraints placed on avionics, programs will continue to advance the 'state of the art' in spacecraft systems development with new challenges to reduce power, mass, and volume. Although new technologies have improved packaging densities, a total system packaging architecture is required that not only reduces spacecraft volume and mass budgets, but increase integration efficiencies, provide modularity and scalability to accommodate multiple missions. With these challenges in mind, a novel packaging approach incorporates solutions that provide broader environmental applications, more flexible system interconnectivity, scalability, and simplified assembly test and integration schemes. This paper will describe the fundamental elements of the Integrated Avionics System (IAS), Horizontally Mounted Cube (HMC) hardware design, system and environmental test results. Additional information is contained in the original extended abstract.

Hunter, D. J.↗

Conference on Nutrition in Space and Related Waste Problems

As part of a continuing process man constantly seeks new habitats. In the late 1950's, he ventured into a vast and challenging new habitat, extraterrestrial space. Extending the realm of human life has always been a challenge to man, and inherent to all successful extensions of man into new domains is his ability to provide the essentials for life itself, his nutrition and controlled use of metabolic products. The provision of these essential requirements has always been a challenge and a motivating force in maintaining and extending human life on Earth. This challenge has now been extended beyond the Earth. As illustrated in this volume, many men and women of vision who continually devote their energies to feeding man on Earth have accepted the additional challenge of nutrition in space. They have already made inroads into the new problem of nutrition and waste handling in space and have already collected much physiological, psychological, toxicological, and pathological data related to space nutrition, feeding and elimination. They have elucidated man-machine interactions and the effects of these interactions on alimentation and elimination requirements in space. Thus light has been shed on specific research and development programs needed to establish requirements for nutrition and handling of metabolic wastes during manned space missions of 20 days' to 3 years' duration. These initial accomplishments have entailed the considerable efforts of many people and the knowledge and experience in nutrition and feeding gained by the Space Science Board of the National Academy of Sciences. This volume clearly represents the ability of scientists, engineers, and administrators to attack a problem as it arises; it clearly demonstrates the capability of the scientific and engineering communities to combine efforts, mobilize quickly, and devote their talents to a national need

Space environment↗

CMS distributed data analysis with CRAB3

The CMS Remote Analysis Builder (CRAB) is a distributed workflow management tool which facilitates analysis tasks by isolating users from the technical details of the Grid infrastructure. Throughout LHC Run 1, CRAB has been successfully employed by an average of 350 distinct users each week executing about 200,000 jobs per day.CRAB has been significantly upgraded in order to face the new challenges posed by LHC Run 2. Components of the new system include 1) a lightweight client, 2) a central primary server which communicates with the clients through a REST interface, 3) secondary servers which manage user analysis tasks and submit jobs to the CMS resource provisioning system, and 4) a central service to asynchronously move user data from temporary storage in the execution site to the desired storage location. Furthermore, the new system improves the robustness, scalability and sustainability of the service.Here we provide an overview of the new system, operation, and user support, report on its current status, and identify lessons learned from the commissioning phase and production roll-out.

97 MATHEMATICS AND COMPUTING↗

International Space Station Water Balance Operations

In November 2008, the Water Regenerative System racks were launched aboard Space Shuttle flight, STS-126 (ULF2) and installed and activated on the International Space Station (ISS). These racks, consisting of the Water Processor Assembly (WPA) and Urine Processor Assembly (UPA), completed the installation of the Regenerative (Regen) Environmental Control and Life Support Systems (ECLSS), which includes the Oxygen Generation Assembly (OGA) that was launched 2 years prior. With the onset of active water management on the US segment of the ISS, a new operational concept was required, that of water balance . In November of 2010, the Sabatier system, which converts H2 and CO2 into water and methane, was brought on line. The Regen ECLSS systems accept condensation from the atmosphere, urine from crew, and processes that fluid via various means into potable water, which is used for crew drinking, building up skip-cycle water inventory, and water for electrolysis to produce oxygen. Specification (spec) rates of crew urine output, condensate output, O2 requirements, toilet flush water, and drinking needs are well documented and used as the best guess planning rates when Regen ECLSS came online. Spec rates are useful in long term planning, however, daily or weekly rates are dependent upon a number of variables. The constantly changing rates created a new challenge for the ECLSS flight controllers, who are responsible for operating the ECLSS systems onboard ISS from Mission Control in Houston. This paper reviews the various inputs to water planning, rate changes, and dynamic events, including but not limited to: crew personnel makeup, Regen ECLSS system operability, vehicle traffic, water storage availability, and Carbon Dioxide Removal Assembly (CDRA), Sabatier, and OGA capability. Along with the inputs that change the various rates, the paper will review the different systems, their constraints, and finally the operational challenges and means by which flight controllers manage this new concept of "water balance."

Tobias, Barry↗

Before the Battlefield: Competition Spurs Warfighter Innovations

In an effort funded by the Defense Threat Reduction Agency’s (DTRA) Joint Science and Technology Office, Pacific Northwest National Laboratory’s Dr. Lauren Charles and Mr. Michael Henry run an Intern-based Biosurveillance Ecosystem (BSVE) Web Application Development Contest. The competition topics target specific gaps in data collection, integration, analysis, and visualization of essential information needed for situational awareness of chemical and biological threats. The 10-week long summer internship program leverages the creativity and talent of graduate students as well as exposes bright, young professionals to the field of biosurveillance. For this past summer’s competition, Dr. Charles decided to try something different. She devised a new way to inspire innovation and gain higher quality results for the development of novel applications to aid in chemical and biological situational awareness. To this end, Dr. Charles developed and instantiated an Innovation Bootcamp Program aimed at training the student interns how to work effectively in interdisciplinary teams and quickly tackle new challenging problems while still producing top quality products. This new program was founded on three main components for success: people, tools, and application.

Innovation, Innovation, Biosurveillance, Intern Co↗

Some Challenges in the Design of Human-Automation Interaction for Safety-Critical Systems

Increasing amounts of automation are being introduced to safety-critical domains. While the introduction of automation has led to an overall increase in reliability and improved safety, it has also introduced a class of failure modes, and new challenges in risk assessment for the new systems, particularly in the assessment of rare events resulting from complex inter-related factors. Designing successful human-automation systems is challenging, and the challenges go beyond good interface development (e.g., Roth, Malin, & Schreckenghost 1997; Christoffersen & Woods, 2002). Human-automation design is particularly challenging when the underlying automation technology generates behavior that is difficult for the user to anticipate or understand. These challenges have been recognized in several safety-critical domains, and have resulted in increased efforts to develop training, procedures, regulations and guidance material (CAST, 2008, IAEA, 2001, FAA, 2013, ICAO, 2012). This paper points to the continuing need for new methods to describe and characterize the operational environment within which new automation concepts are being presented. We will describe challenges to the successful development and evaluation of human-automation systems in safety-critical domains, and describe some approaches that could be used to address these challenges. We will draw from experience with the aviation, spaceflight and nuclear power domains.

systems engineering↗

Fiber-Based Laser Transmitter at 1.57 Micrometers for Remote Sensing of Atmospheric Carbon Dioxide from Satellites

Over the past 20 years, NASA Goddard has successfully developed space-based lidar for remote sensing studies of the Earth and planets. The lidar in all missions to date have used diode pumped Nd:YAG laser transmitters. Recently we have been concentrating work on developing integrated path differential absorption (IPDA) lidar to measure greenhouse gases, with the goal of measurements from space. Due to the absorption spectrum of CO2 a fiber-based master oscillator power amplifier (MOPA) laser with a tunable seed source is an attractive laser choice. Fiber-based lasers offer a number of potential advantages for space, but since they are relatively new, challenges exist in developing them. In order to reduce risks for new missions using fiber-based lasers, we developed a 30- month plan to mature the technology of a candidate laser transmitter for space-based CO2 measurements to TRL-6. This work is also intended to reduce development time and costs and increase confidence in future mission success.

Fiber Lasers↗