Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NEAR IR WAVELENGTHS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

ERTS-1 observes algal blooms in Lake Erie and Utah Lake

During late summer when the surface waters of Lake Erie reach their maximum temperature an algal bloom is likely to develop. Such phenomena have been noticed on other shallow lakes using ERTS-1 and characterize eutrophic conditions. The concentration of the algae into long streamers provides additional information on surface circulations. To augment the ERTS-1 MSS data of Lake Erie an aircraft was flown to provide correlative thermal-IR and additional multiband photographs. The algal bloom is highly absorptive in the visible wavelengths but reverses contrast with the surrounding water in the near-IR bands. The absorption of shortwave energy heats the dark brown algal mass, providing a hot surface target for the thermal-IR scanner.

Strong, A. E.↗
DOE OSTI2020

Near-field probing of strong light-matter coupling in single IR antennae

Quantum well intersubband polaritons are traditionally studied in large scale ensembles, over many wavelengths in size.In this presentation, we demonstrate that it is possible to detect and investigate intersubband polaritons in a single sub-wavelength nanoantenna in the IR frequency range. We observe polariton formation using a scattering-type near-fieldmicroscope and nano-FTIR spectroscopy. In this work, we will discuss near-field spectroscopic signatures of plasmonic antennae withand without coupling to the intersubband transition in quantum wells located underneath the antenna. Evanescent fieldamplitude spectra recorded on the antenna surface show a mode anti-crossing behavior in the strong coupling case. Wealso observe a corresponding strong-coupling signature in the phase of the detected field. We anticipate that this near-fieldapproach will enable explorations of strong and ultrastrong light-matter coupling in the single nanoantenna regime,including investigations of the elusive effect of ISB polariton condensation.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Imaging Domain Walls in van der Waals Ferroelectrics Using Tip-Enhanced Second Harmonic Generation

van der Waals ferroelectrics have captured significant interest for applications in novel memory and neuromorphic computing devices. Within these materials, interfaces between regions of different ferroelectric polarizations (i.e., domain walls) exhibit distinctive behaviors. Characterization of these behaviors remains a challenge, as domain wall thickness resides at the nanoscale. Using tip-enhanced second harmonic generation (TESHG), we demonstrate nanoscale imaging of domain walls in 2D ferroelectric α-In 2 Se 3 . With a narrow-band near-IR laser, we take advantage of high-wavelength, off-resonant signal enhancement to generate robust and reproducible TESHG. In conclusion, a 16 nm spatial resolution is achieved, and we identify spectral features suggesting that nonlocal effects from domain walls persist nanometers into adjacent domains.

Mantilla, Alexander B. C. [Washington State Univ.,↗
DOE OSTI2022

Selective Thermal Emission with Radiation and Adsorption in Annuli (STERADIAN): An Advanced Heat Exchanger Concept for Supercritical CO 2 Power Cycles

One of the key limitations affecting ability to achieve the efficiency and cost saving advantages of a supercritical CO 2 (scCO 2 ) power cycle resides with the primary heat exchanger where costs can exceed 50% of the plant capital budget depending on design. This project established the foundational groundwork for a new type of heat exchanger optimized to take advantage of radiative heat transfer to scCO 2 . Selective thermal emission coatings were designed and tested that radiated more light tuned to the 4.2 µm infrared absorption band of CO 2 . Coating design utilized principles of nanophotonic bandgap theory to design a selective emitter that has: 1) low emissivity in the visible band, 2) near 100% effective emissivity in the mid-IR wavelength between 4 and 4.5 µm wavelength, and 3) strong suppression of far-IR light emission that will maximize radiative heat transfer efficiency to scCO 2 . Computational fluid dynamics simulations show that an advanced heat exchanger implementing this selective thermal emitter coating is 25 to as much as 40% smaller than conventional heat exchanger designs.

14 SOLAR ENERGY↗
NASA NTRS2017

Thermal Design and Analysis of the Optical Telescope Assembly for the Gondola for High Altitude Planetary Science

The NASA Gondola for High Altitude Planetary Science (GHAPS) project is an effort to design, build, and fly a balloon-borne platform for planetary science missions. GHAPS observations will be in the 300 nm to 5 micron wavelength region covering UV, visible, and near-mid IR. The primary element of the project is the Optical Telescope Assembly (OTA). It is a one meter aperture narrow-field-of-view telescope that contains the primary and secondary mirrors, the support system/metering structure, a secondary mirror focusing system, baffles, and insulation. This paper presents the thermal design and analysis that has been done to support the design of the OTA. A major part of the thermal analysis was bounding the flight environment for the six potential Columbia Scientific Balloon Facility launch sites. These analyses were used to give input into the Structural Thermal Optical Performance (STOP) analysis of the telescope. Also the analysis was used to select heater sizes for the few OTA associated electronic components. Currently the telescope is scheduled to have its first flight in 2019.

O'Connor, Brian↗
NASA NTRS2000

Tunable Single-Frequency Near IR Lasers for DIAL Applications

Tunable single-frequency sources in the 2-4 micron wavelength region are useful for remote DIAL measurements of chemicals and pollutants. We are developing tunable single-frequency transmitters and receivers for both direct and coherent detection lidar measurement applications. We have demonstrated a direct-diode-pumped PPLN-based OPO that operates single frequency, produces greater than 10 mW cw and is tunable over the 2.5 - 3.9 micron wavelength region. This laser has been used to injection seed a pulsed PPLN OPO, pumped by a 1.064 micron Nd:YAG laser, producing 50-100 microJoule single-frequency pulses at 100 Hz PRF near 3.6 micron wavelength. In addition, we have demonstrated a cw Cr:ZnSe laser that is tunable over the 2.1 - 2.8 micron wavelength region. This laser is pumped by a cw diode-pumped Tm:YALO laser and has produced over 1.8 W cw. Tm- and Tm, Ho-doped single-frequency solid-state lasers that produce over 50 mW cw and are tunable over approximately 10 nm in the 2 -2.1 micron band with fast PZT tuning have also been demonstrated. A fast PZT-tunable Tm, Ho:YLF laser was used for a direct-detection column content DIAL measurement of atmospheric CO2. Modeling shows that that all these cw and pulsed sources are useful for column-content coherent DIAL measurements at several km range using topographic targets.

Henderson, Sammy W.↗
NASA NTRS1998

Semi-Annual Status Report

This 6 month period continued the effort on absolute spectrally continuous stellar calibration begun in January 1991. The Midcourse Space Experiment (MSX) DCATT team has continued its analysis and intercomparisons of the Spatial Infrared Imaging Telescope (SPIRIT-III) ground calibration, the on-orbit stellar calibration (using our stellar spectra), and the on-orbit observations of the MIT Lincoln Labs. "emissive spheres". All three approaches are in very good agreement, at about the +/-3% level (absolute). This demonstrates the consistency of our overall calibration scheme and validates the context in which Infrared Space Observatory (ISO) and MSX data also reside. Final "globalization" of the overall MSX calibration is in progress, combining calibrations by stars, by the "emissive spheres" experiments, and by the NIST-traceable ground calibration. The work in support of the Infrared Telescope Satellite (IRTS) continues. I am currently calculating the contribution of diffuse starlight to the background in "dark" regions of the sky observed by the IRTS Near-IR Spectrometer. To accomplish this I am using the SKY model with a new extended wavelength capability, covering the 1.00-2.00 micron region for the first time. These calculations, together with models of the zodiacal light, will be used to seek the presence of a cosmic near-IR background. Papers VIII and IX in the calibration series appeared in this 6 month period. These describe our results on asteroid thermal nodes and anticipate the eventual production of a new network of stellar calibrators, numbering over 400 and extending over the whole sky. These will be constructed as stellar "templates", building on the legacy of our series of calibration papers. The first analyses of star counts from MSX are under way using SKY.

Cohen, Martin↗
NASA NTRS1977

Far-infrared emission from compact sources in NGC 2264 and the Rosette Nebula

The paper reports the discovery of far-IR emission at 53, 100, and 175 microns from two sources (one in NGC 2264 and another near the Rosette Nebula) associated with molecular clouds but not with any detectable radio continuum emission. The maximum source diameters are estimated to be 20 arcsec, and the spectra of both objects are shown to be broader than that of a 'typical' H II region. It is found that both objects are unresolved at all the IR wavelengths observed, have relatively wide IR spectra, are located at or near the apices of fan-shaped cometary nebulae, have colors between 50 and 200 microns that are among the coolest of any observed far-IR sources, and have luminosities that are an order of magnitude less than the weakest sources observed near compact H II regions. A cylindrically symmetric source model is considered in which a 'hole' in the dust distribution around the central source provides the visible luminosity of the nearby nebula and the dust temperature decreases rapidly with distance. It is suggested that the central sources are probably pre-main-sequence stellar objects with masses of 5 to 10 solar masses and luminosities of a few thousand suns.

Harvey, P. M.↗
NASA NTRS2013

The WIRED Survey. IV. New Dust Disks from the McCook & Sion White Dwarf Catalog

We have compiled photometric data from the Wide-field Infrared Survey Explorer All Sky Survey and other archival sources for the more than 2200 objects in the original McCook & Sion Catalog of Spectroscopically Identified White Dwarfs. We applied color-selection criteria to identify 28 targets whose infrared spectral energy distributions depart from the expectation for the white dwarf photosphere alone. Seven of these are previously known white dwarfs with circumstellar dust disks, five are known central stars of planetary nebulae, and six were excluded for being known binaries or having possible contamination of their infrared photometry. We fit white dwarf models to the spectral energy distributions of the remaining ten targets, and find seven new candidates with infrared excess suggesting the presence of a circumstellar dust disk. We compare the model dust disk properties for these new candidates with a comprehensive compilation of previously published parameters for known white dwarfs with dust disks. It is possible that the current census of white dwarfs with dust disks that produce an excess detectable at K-band and shorter wavelengths is close to complete for the entire sample of known WDs to the detection limits of existing near-IR all-sky surveys. The white dwarf dust disk candidates now being found using longer wavelength infrared data are drawn from a previously underrepresented region of parameter space, in which the dust disks are overall cooler, narrower in radial extent, and/or contain fewer emitting grains.

Dwarf↗
NASA NTRS2006

Adaptive Nulling for the Terrestrial Planet Finder Interferometer

Deep, stable starlight nulls are needed for the direct detection of Earth-like planets and require careful control of the intensity and phases of the beams that are being combined. We are testing a novel compensator based on a deformable mirror to correct the intensity and phase at each wavelength and polarization across the nulling bandwidth. We have successfully demonstrated intensity and phase control using a deformable mirror across a 100nm wide band in the near-IR, and are in the process of conducting experiments in the mid-IR wavelengths. This paper covers the current results and in the mid-IR.

amplitude and phase correction↗
NASA NTRS1990

CCD imaging of Neptune at methane-band wavelengths

Ground-based CCD imaging of Neptune in the near-IR clearly shows discrete cloud features. The brightest cloud features on Neptune are confined to latitudes from about 30 to 50 deg (in both hemispheres). Fainter enhanced regions are sometimes seen at even higher latitudes. Imaging obtained prior to 1986 showed bright clouds in both northern and southern midlatitudes, giving Neptune the appearance of having a dark equatorial belt. But since 1986, only the southern hemisphere has shown clouds; no bright features have been seen in the northern hemisphere. The equatorial region is not significantly darker than the northern midlatitudes. Discrete features are most obvious in the strongest methane band (8900 A), but brightness asymmetry is seen in weaker methane bands (7270 and 6190 A). Disk-integrated photometry obtained from the 1986 and 1987 imaging was calibrated absolutely with the same flux standard. In both years, variability at 8900 A was dominated by scattered light from a single bright cloud feature. The amplitude of the variability was a factor of two higher in 1987. The brightness of the less active hemisphere appears relatively constant between the two years, although some variability is seen on this hemisphere in 1987.

Hammel, H. B.↗
NASA NTRS2005

Near Infrared Spectra of Mixtures Relevant to Icy Satellites

We will present near IR spectra of ice mixtures and review the differences between spectra of mixtures and those of pure solids: the creation of new features, weakening and shifting of bands, dependence on concentration, and changes with temperature. The forbidden CO2 (2nu3) overtone at 2.134 microns (4685/cm) is absent from the spectrum of pure CO2, but present in all of the following mixtures: H2O/CO2 = 5 and = 25, H2O:CH3OH:CO2 = 100:2.5:1, and CH3OH:CO2 = 5. Also, in mixtures of H2O and any other material, we see a feature at 1.89 microns (5290/cm) that is possibly related to the "dangling OH" feature at 2.73 microns (3360/cm). The features of a material in H2O are generally weaker and shifted to longer wavelength in comparison to the pure substance. For example, the largest near-IR absorption of pure solid CH4 is located at 2.324 microns (4303/cm) but is broader and at slightly longer wavelength in samples mixed with H2O. The degree of shifting and weakening depends on the ratio of the mixture. The mixture mentioned above was at a ratio of H2O/ CH4 = 3. When the ratio rises to H2O/ CH4 = 87, the CH4 feature at 2.324 microns is shifted to shorter wavelength and is much broader and weaker. In CH4/ H2O mixtures the peaks shift to higher frequency and become increasingly broad, but this trend is reversible on re-cooling, even though the phase transitions of H2O are irreversible. In short, mixtures created in the lab produce spectra that are very different from modeled combinations of end member species. Recent Cassini VIMS observations show the CO2 fundamental at 4.255 microns (2350/cm) on Iapetus [l] and at 4.26 microns (2347/cm) on Phoebe [2], while Galileo NIMS observed it at 4.25 microns (2353/cm) on Ganymede [3]. Since pure CO2 is located at 4.266 (2344/cm), the CO2 must be mixed with something else to produce the shift. A mixture of CH3OH:CO2 = 5 at 90 K shifts the fundamental to 4.262 microns (2346/cm). The shifts in the feature between satellites could indicate variations in concentration and temperature, or the introduction of a new compound, encouraging further lab investigation.

Mastrapa, Rachel M. E.↗
DOE OSTI2025

Characterization of High Speed Optical and Magnetic Interactions in Superconducting Nanowire Single Photon Detectors

Single-photon detectors are essential tools for quantum photonics. The ideal single photon detector would exhibit a quantum efficiency (QE) of 100% (i.e. no false negatives), zero dark photon counts per second (i.e. no false positives), zero dead time (i.e. the detector is capable of detecting one photon immediately after another), and zero jitter (i.e. the electrical signal produced by the detector perfectly reproduces the timing of the input photon signal). Commercially available avalanche photodiodes (APDs) have generally performed reasonably well for visible wavelengths but they perform poorly at longer wavelengths. For wavelengths spanning the near- ultraviolet (UV) to the mid- infrared (IR), superconducting nanowire single photon detectors (SNSPDs) can exhibit quantum efficiencies exceeding 90% with dark count rates and timing jitter roughly an order of magnitude less than is typically seen in APDs. While SNSPDSs are now commercially available from several small businesses, fundamental questions about the nature of photon interactions with superconducting nanostructures remain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1973

Optical space astronomy and goals of the large space telescope.

Optical astronomy now means the study of EM radiation in the very near IR and vacuum UV in addition to the visible wavelengths. Practical constraints presently define the IR limit at about 11000 A, where photoemissive cathodes become ineffective, and the UV limit at 912 A, where the hydrogen of the interstellar medium limits the view to very nearby objects. Salient events of the first decade of optical space astronomy are discussed together with the orbiting astronomical observatories. Particular attention is given to the large space telescope (LST) project, taking into account the physical characteristics of the LST and the scientific program.

O'Dell, C. R.↗
NASA NTRS1986

Intensified-CCD focal plane detector for space applications A second generation

An intensified-CCD detector system developed for space applications from commercially available components is described. This detector uses components which are readily available and are mechanically, thermally, and optically coupled to produce the final compact system. The CCD is cooled using a Peltier-effect thermoelectric cooler to reduce thermal noise. The image is formed on the photocathode of a proximity-focused image intensifier and is transferred fiber-optically from the intensifier to the CDD. Various photocathode and window materials are used to optimize the system for use within the wavelength range extending from the far UV to the near IR. The basic design, including the image intensifier, intensifier-CCD interface, CCD array, cooling, electronics, and mounting, and the detector performance are described in detail.

Torr, M. R.↗
NASA NTRS1988

Non-destructive plant health sensing using absorption spectroscopy

The sensor group of the 1988 EGM 4001 class, working on NASA's Controlled Ecological Life Support Systems (CELSS) project, investigated many different plant health indicators and the technologies used to test them. The project selected by the group was to measure chlorophyll levels using absorption spectroscopy. The spectrometer measures the amount of chlorophyll in a leaf by measuring the intensity of light of a specific wavelength that is passed through a leaf. The three wavelengths of light being used corresponded to the near-IR absorption peaks of chlorophyll a, chlorophyll b, and chlorophyll-free structures. Experimentation showed that the sensor is indeed measuring levels of chlorophyll a and b and their changes before the human eye can see any changes. The detector clamp causes little damage to the leaf and will give fairly accurate readings on similar locations on a leaf, freeing the clamp from having to remain on the same spot of a leaf for all measurements. External light affects the readings only slightly so that measurements may be taken in light or dark environments. Future designs and experimentation will concentrate on reducing the size of the sensor and adapting it to a wider range of plants.

Bledsoe, Jim↗
NASA NTRS1993

Groundbased imaging spectroscopy of Mars in the near-infrared - Preliminary results

The initial results of a NIR spectral imaging study conducted from Mauna Kea Observatory during the 1990 opposition are presented. The study's main goals were to determine whether it is possible to map and monitor subtle variations in surface and atmospheric components on Mars from ground-based observations and to constrain Mars surface and airborne dust composition. Small variations near 2.3 microns include both atmospheric (CO) and surface/dust mineral absorption, although the data cannot yet accurately discriminate these components or assess their relative contributions. The present data set, even after preliminary calibration steps, demonstrates the potential of the Mars imaging spectroscopic observations in the near-IR. Focused ground-based telescopic studies in selected wavelength regions accompanied by detailed high spectral resolution atmospheric modeling will allow the mapping and monitoring of surface minerals, atmospheric aerosols, and atmospheric trace gases.

Bell, James F., III↗