Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Modernization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

A Human Factors Engineering Process to Support Human-System Interface Design in Control Room Modernization

The primary objective of the United States (U.S.) Department of Energy (DOE) Light Water Reactor Sustainability (LWRS) program is to sustain operation of the existing commercial nuclear power plants (NPPs) through a multi-pathway approach in conducting research and development (R&D). The Advanced Instrumentation, Information, and Control (II&C) System Technologies pathway conducts targeted R&D to address aging and reliability concerns with legacy instrumentation and control (I&C) and other information systems in existing U.S. NPPs. Control room modernization is an important part following this pathway, and human factors experts at Idaho National Laboratory (INL) have been involved in conducting R&D to support migration of new digital main control room (MCR) technologies from legacy analog and legacy digital I&C. This paper describes a human factors engineering (HFE) process that supports human-system interface (HSI) design in MCR modernization activities, particularly with migration of old digital to new digital I&C. The process described in this work is an expansion from the LWRS Report INL/EXT-16-38576, and is a requirements-driven approach that aligns with NUREG-0711 requirements. The work described builds upon the existing literature by adding more detail around key tasks and decisions to make when transitioning from HSI Design into Verification and Validation (V&V). The overall objective of this process is to inform HSI design and elicit specific, measurable, and achievable human factors criteria for new digital technologies. Upon following this process, utilities should have greater confidence with transitioning from HSI design into V&V.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2020

Utilities Find Success Using NREL's ADMS Test Bed for Grid Modernization

The National Renewable Energy Laboratory (NREL) and the U.S. Department of Energy's (DOE's) Office of Electricity have developed a vendor-neutral, advanced distribution management system (ADMS) test bed to accelerate grid modernization efforts for utilities using an ADMS. NREL has partnered with utilities to demonstrate three grid modernization use cases.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

All Hazards Approach to Grid Modernization

Resilience hazards for electric power systems are on the rise, exacerbated by both a rise in extreme weather events and manmade physical and cyber attacks. At the same time, grid modernization challenges plague the United States, covering everything from increased electrification and ambitious renewable energy targets to aging infrastructure and regulation that lags behind today’s challenges. This talk will cover an all-hazards risk based approach that addresses both rising resilience and grid modernization challenges. Examples of this approach taken for national laboratory research projects will be discussed, including a deep dive into a project that addressed black start, resynchronization, distributed control, and cybersecurity challenges for an operational microgrid up to sub-transmission voltages. As takeaways from this project are translated from demonstration scale to real-world exercises, key lessons are noted on the translation from research into practice and how this can inform risk-based research moving forward

17 WIND ENERGY↗
DOE OSTI2022

Domain-Specific Type-Safe APIs for Hierarchical Scientific Data with Modern C++

General-purpose library application programming interfaces (APIs) for self-describing hierarchical scientific data storage, such as the HDF5 and NetCDF libraries, are traditionally of runtime nature. Runtime errors for entry existence and data types are typically caught later in the development process of higher-level application-specific APIs. In this paper, we propose exploiting modern C++ metaprogramming features to add compile-time type-safety to improve the interaction with a well-defined metadata-rich scientific schema in domain-specific hierarchical datasets. We tackle two aspects of common use: (i) direct data access, (ii) flexible “in-memory” index models for efficient search and data processing. The proposed APIs use C++17’s template type auto deduction features, C++11’s enum class for type-safety and C-style preprocessor macros for generative templated code. We showcase the pros and cons of our initial work on the standard NeXus schema used for annotating and storing experimental neutron scattering data at several facilities around the world on top of HDF5. Extendable compile-time type-safe APIs are a desirable feature that could be indexed by any modern integrated development environment (IDE). Hence, such APIs can help ease the learning curve for domain scientists using a less error-prone software interaction to enhance the findability of their data without resorting to a domain-specific language (DSL).

Godoy, William↗
DOE OSTI2016

Modernization of the Control Systems of High-Frequency, Brush-Free, and Collector Exciters of Turbogenerators

Methods of modernizing the regulation systems of electric machinery exciters with high-frequency, brush-free, and collector exciters by means of microprocessor technology are examined. The main problems of modernization are to increase the response speed of a system and to use a system stabilizer to increase the stability of the power system.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

The genomic footprints of wild Saccharum species trace domestication, diversification, and modern breeding of sugarcane

Sugarcane is a major crop of unclear origins due to its complex polyploid interspecific genome. We analyzed genome ancestries using whole-genome sequence data from 390 representative accessions based on repeated k-mers and chloroplast phylogeny. The results provided evidence that Saccharum officinarum was domesticated in the New Guinea region from the S. robustum wild species and revealed that its genome is a mosaic involving different S. robustum subgroups. We discovered a wild Saccharum contributor to most modern cultivars, likely originating from East Melanesia. We highlighted two early centers of sugarcane diversification associated with human transport, one in continental Asia through hybridization with different S. spontaneum subgroups and one in the Melanesian and Polynesian islands via hybridization with the discovered ancestor and Miscanthus. Finally, we revealed the genome ancestry of modern cultivars, highlighting untapped wild Saccharum diversity as a source of alleles for breeding programs.

Garsmeur, Olivier [CIRAD, Montpellier (France). Ag↗
DOE OSTI2023

Code modernization strategies for short-range non-bonded molecular dynamics simulations

Modern HPC systems are increasingly relying on greater core counts and wider vector registers. Thus, applications need to be adapted to fully utilize these hardware capabilities. One class of applications that can benefit from this increase in parallelism are molecular dynamics simulations. In this paper, we describe our efforts at modernizing the ESPResSo++ simulation package for molecular dynamics by restructuring its particle data layout for efficient memory accesses and applying vectorization techniques to benefit the calculation of short-range non-bonded forces, which results in an overall three times speedup and serves as a baseline for further optimizations. We also implement fine-grained parallelism for multi-core CPUs through HPX, a C++ runtime system which uses lightweight threads and an asynchronous many-task approach to maximize concurrency. Our goal is to evaluate the performance of an HPX-based approach compared to the bulk-synchronous MPI-based implementation. This requires the introduction of an additional layer to the domain decomposition scheme that defines the task granularity. On spatially inhomogeneous systems, which impose a corresponding load-imbalance in traditional MPI-based approaches, we demonstrate that by choosing an optimal task size, the efficient work-stealing mechanisms of HPX can overcome the overhead of communication resulting in an overall 1.4 times speedup compared to the baseline MPI version.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Fe-bearing phases in modern lacustrine microbialites from Mexico

Transition metal ions impurities in microbialites have been previously suggested as paleoenvironmental and/or paleobiological proxies. However, how metals are incorporated into microbialites remains poorly known. Here, in order to assess the distribution and speciation of Fe in modern microbialites, we conducted bulk X-ray diffraction, infrared spectroscopy, X-ray absorption near-edge structure (XANES) spectroscopy, electron microscopy and X-ray microscopy analyses on samples collected from shallow depths in five alkaline lakes in Mexico: Lake Alchichica, Lake La Preciosa, Lake Atexcac, Lake La Alberca de Los Espinos and Lake Pátzcuaro. A range of Fe contents were measured in these microbialites, from low (~0.12 wt.%) to relatively high (~2.2 wt.%). Fe was distributed heterogeneously in microbialites, mostly localized as hotspots or sometimes arranged as discrete laminae. Fe was mostly trivalent in all microbialites and was incorporated into diverse authigenic phases, the proportion of which varied among microbialites. Authigenic phases included Fe-bearing Mg-phyllosilicates such as kerolite and/or stevensite, i.e. (Mg,Fe(II),Fe(III)) 3 Si 4 O 10 (OH) 2 ·nH 2 O and Fe-Mg layered double hydroxides (LDH), i.e. pyroaurite [Mg(II) 6 Fe(III) 2 (CO 3 )(OH) 16 ·4H 2 O] and/or iowaite [Mg(II) 6 Fe(III) 2 Cl 2 (OH) 16 ·4H 2 O], together with Fe-(oxyhydr)oxides. Carbonate phases were negligible carriers of Fe in all lakes. Iowaite/pyroaurite phases, which have often been found as low temperature alteration products in serpentinites, were surprisingly observed in Lake Alchichica, whereas Fe-bearing kerolite/stevensite was present in Lake La Preciosa, Lake Atexcac, Lake La Alberca de Los Espinos and Lake Pátzcuaro. Fe present in these shallow water microbialites may be originated from groundwater seepage derived from adjacent Fe-rich volcanic rocks. We suggest that the occurence of iowaite/pyroaurite vs authigenic Fe-bearing kerolite/stevensite depends on the orthosilicic acid concentration in the lakes. Pyroaurite/iowaite may form and stay preserved in Lake Alchichica because of the low [H 4 SiO 4 ] as well as high alkalinity, [Mg 2+ ], [CO 3 2- ], [Cl-] and pH (~9) prevailing in this lake, while in other lakes, where [H 4 SiO 4 ] is higher (above ~0.4 mM), Fe-bearing kerolite or smectite phases are formed. Overall, the message carried by the Fe-bearing mineral phases in these modern microbialites is multifold: Fe-bearing phases within microbialites may contain some information on environmental conditions (e.g., [H 4 SiO 4 ]) as well as on geochemical processes implicated during their formation (e.g., seepage of anoxic Fe-bearing groundwater). Considering the reactivity of pyroaurite/iowaite and kerolite/stevensite and their possible transformation into diverse mineral phases upon microbial activity, burial and diagenesis, a careful appraisal of Fe speciation using a similar combination of bulk and microscopy analyses is required in order to better assess the origin of Fe in ancient microbialites.

58 GEOSCIENCES↗
DOE OSTI2026

Composition and persistence of soil organic matter along eroding and depositional transects in buried vs. modern soil layers: A case of the Brady paleosol at Wauneta, Nebraska

Paleosols form when soils are buried through deposition by aeolian, colluvial, alluvial or other processes. Burial of former topsoil isolates soil organic matter (SOM) from surface conditions, allowing carbon to accumulate and potentially remain stable for millennia. In this study, SOM composition, distribution, and persistence were analyzed in the Brady Soil of Nebraska, USA to compare SOM spatial variability in modern and buried soils, as well as the impact of erosional exposure on SOM stability. The Brady Soil, formed as a surface soil during the Pleistocene-Holocene transition and now a paleosol buried up to 6 m deep (or more) by loess deposition during the Holocene, was sampled along burial (up to 5.8 m depth) and erosional (up to 1.8 m depth) transects to compare SOM dynamics in different geomorphic settings. Fourier Transform Infrared Spectroscopy (FTIR) and Fourier Transform ion cyclotron resonance mass spectrometry (FTICR-MS) were used to analyze SOM composition, while δ 13 C isotope analyses identified SOM sources and radiocarbon values were used to estimate turnover rates. Results confirmed a vegetation shift from C3 to C4 plants after Brady Soil formation, reflecting warming climatic conditions. Increasing SOM age and decreasing δ 13 C and δ 15 N values with depth indicated slowing of decomposition rate in buried soils. Higher pH in the Brady Soil suggested greater base cation content, supporting SOM stabilization through organo-mineral associations and aggregate formation. However, exposure of the Brady Soil due to surface erosion caused faster SOM turnover. This result suggested susceptibility of buried SOM to losses via decomposition upon erosional exposure, possibly accelerated by priming in response to modern SOM inputs. These findings highlight the potential loss of carbon stocks in buried soils under future climate change, as shifts in soil physicochemical properties may destabilize long-preserved SOM.

Environmental sciences↗
DOE OSTI2020

Historic and modern approaches for discovery of abandoned wells for methane emissions mitigation in Oil Creek State Park, Pennsylvania

Hundreds of oil wells were drilled along Oil Creek in Pennsylvania in the mid-16 1800s, birthing the modern oil industry. No longer in operation, many wells are now classified as abandoned, and, due to their age, their locations are either unknown or inaccurately recorded. These historic well sites present environmental, safety, and economic concerns in the form of possible methane leaks and physical hazards. Airborne magnetic and LiDAR surveys were conducted in the Pioneer Run watershed in Oil Creek State Park to find abandoned wells in a historically significant but physically challenging location. Wells were drilled in this area prior to modern geolocation and legal documentation. Although a large number of old wells were abandoned summarily without remediation of the site, much of the land area within Oil Creek State Park is now covered in trees and dense underbrush, which can obscure wellheads. The thick vegetation and steep terrain limited the possibility of ground-based surveys to easily find well sites for methane emissions studies. The data from remote sensing surveys were used to corroborate potential well locations from historic maps and photographs. Potential well sites were verified in a ground-based field survey and monitored for methane emissions. Two historic photographs documenting oil activity in the late 1800s were georeferenced using a combination of magnetic and LiDAR data. LiDAR data, which were more useful in georeferencing and in field verification, identified 290 field locations in the Pioneer Run watershed, 86% of which were possible well sites. Sixty-two percent of the ground-verified wells remained unplugged and comprised the majority of leaking wells. The mean methane emissions factor for unplugged wells was 0.027 ± 0.099 kg/day, lower than other Appalachian Basin methane emissions estimates. LiDAR was used for the first time, in combination with an airborne magnetic survey, to reveal underground oil industry features and inform well identification and remediation efforts in difficult-to-navigate regions. In the oldest oil fields, where well casing has been removed or wood conductor casing was installed, historic photographs provide additional lines of evidence for oil wells where ground disturbances have concealed surface features. Identification of well sites is necessary for mitigation efforts, as unplugged wells emit methane, a potent greenhouse gas.

02 PETROLEUM↗
DOE OSTI2021

Modernizing the active neutron collar poison rod correction using simulations to enhance PWR fresh fuel verification

The declared inventory of 235 U in fresh, low enriched uranium, nuclear fuel assemblies is routinely verified by nuclear safeguards inspectorates using the UNCL (Uranium Neutron Collar – Light Water Reactor Fuel) nondestructive assay instrument. The trend in modern fuels is towards higher initial enrichment, which in turn requires a larger number of burnable poison pins with higher Gadolinia concentration to hold down the initial reactivity. UNCL assay error for modern fuel assemblies typically exceeds 10%. The traditional algorithm used to correct the response for burnable poison content needs revision to achieve accuracy comparable to the $\sigma_\text{R}$ of 4.5% expected for poison-free assemblies. Here we review the problem and use a large set of 287 Monte Carlo simulations based on an experimentally benchmarked model corresponding to the 16×16 PWR array used in Brazilian Angra type II and III fuel. Simulated relative responses are used to evaluate the functional form of the poison correction and determine parameters optimal for 16×16 PWR assemblies. This update is conducted using between 4–24 Gadolinia pins ranging 2–11 wt% Gd 2 O 3 with assemblies having mean enrichments ranging 2.5%–5%. Experimental validation of the updated coefficients using seven measurements shows bias is reduced by an order of magnitude and $\sigma_\text{R}$R reduced from 10% to less than 2%. Two updated sets of coefficients are provided, the most accurate of which is directly useable in the existing analysis code (INCC) in use by inspectorate at fuel fabrication facilities.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Critical material content in modern conventional U.S. vehicle electronics

Critical materials (CM) are vital to modern technology. Components of modern vehicles can be recycled to recover and reuse the CMs to help ensure a supply of these materials. Electronic components from a 2015 GMC Sierra truck (21 components) and 2016 Toyota Camry sedan (10 components) were analyzed for CMs. The components were processed via size reduction, aqua regia leaching and dissolution, and final solutions were analyzed for metal content. It was found that most electronic components of both vehicles contain CM. The most concentrated CM in the components were Sn, Nb, and Tb. Nd and Co were found in several of the magnetic components. CM economic value was found to be low compared to the overall value of the components, and the CM content would not allow for a viable pathway for recycling. Remanufacturing of components may be a more economic option of reuse in the future.

2015 GMC Sierra↗
DOE OSTI2025

Applying Gaussian Process Machine Learning and Modern Probabilistic Programming to Satellite Data to Infer CO 2 Emissions

Satellite data provides essential insights into the spatiotemporal distribution of CO 2 concentrations. However, many atmospheric inverse models fail to adequately incorporate the spatial and temporal correlations inherent in satellite observations and often lack rigorous methods for estimating parameters like spatial length scales. We introduce an inference model that processes the spatiotemporal covariance in satellite data and estimates hyperparameters such as covariance length scales. Our approach uses the Gaussian process (GP) machine learning (ML) and modern probabilistic programming languages (PPLs) to perform atmospheric inversions of emissions from satellite data. We develop a GP ML inversion system based on modern PPLs and the GEOS-Chem chemical transport model, simulating atmospheric CO 2 concentrations corresponding to the Orbiting Carbon Observatory-2/3 (OCO-2/3) data for July 2020. In our supervised learning framework, we treat the GEOS-Chem simulated data set as the target, with predictors derived by scaling the target with sector-specific factors hidden from the GP machine. Our results show that the GP model, combined with GPU-enabled PPLs, effectively retrieves true emission scaling factors and infers noise levels concealed within the data. This suggests that our method could be applied over larger areas with more complex covariance structures, enabling comprehensive analysis of the spatiotemporal patterns observed in OCO-2/3 and similar satellite data sets.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2015

Review of modern double beta decay experiments

The review of modern experiments on search and studying of double beta decay processes is done. Results of the most sensitive current experiments are discussed. The main attention is paid to EXO-200, KamLAND-Zen, GERDA-I and CUORE-0 experiments. Modern values of T{sub 1/2}(2ν) and best present limits on neutrinoless double beta decay and double beta decay with Majoron emission are presented. Conservative limits on effective mass of a Majorana neutrino (〈m{sub ν}〉 < 0.46 eV) and a coupling constant of Majoron to neutrino (〈g{sub ee}〉 < 1.3 · 10{sup −5}) are obtained. Prospects of search for neutrinoless double beta decay in new experiments with sensitivity to 〈m{sub ν}〉 at the level of ∼ 0.01-0.1 eV are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Impacts of Modern IT on LCLS-II Experiment Control Systems

Modern information technology (IT) is a broad term with vague and somewhat arbitrary boundaries which can depend on any given novice or subject matter expert’s notional understanding. For the purposes of this article, IT can be understood as standards in communication, computational power, and storage. Additionally, impacts of modern IT extend beyond its products of hardware and software to include associated work practices and engineering processes.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Phosphate Availability Modulates Root Exudate Composition and Rhizosphere Microbial Community in a Teosinte and a Modern Maize Cultivar

Domestication and breeding have affected interactions between plants and their microbiomes in ways that are only beginning to be understood but may have important implications for recruitment of rhizosphere microorganisms, particularly under stress conditions. We investigated the responses of a modern maize (Zea mays subsp. mays) cultivar and its wild relative, teosinte (Z. mays subsp. parviglumis), to different phosphate availabilities. We appraised responses of the plant-microbial holobiont to phosphate stresses by profiling root exudate metabolomes, and microbial communities in the root endosphere and rhizosphere. We also performed plate assays to quantify phosphate-solubilizing microorganisms from the rhizosphere. Although root exudate metabolite profiles were distinct between the teosinte and modern maize under high phosphate, both plants shifted exudate compositions in response to phosphate stress toward a common metabolite profile. Root and rhizosphere microbial communities also responded significantly to both plant type and the phosphate availability. A subset of bacterial and fungal taxa were differentially abundant under the different phosphate conditions, with each of the three conditions favoring different taxa. Both teosinte and maize rhizospheres harbored phosphate-solubilizing microorganisms under all growth conditions. These results suggest that the root exudation response to phosphate stress was conserved through the domestication of maize from teosinte, shifting exudation levels of specific metabolites. Although microbial communities also shifted, plate-based assays did not detect selective recruitment of phosphate solubilizers in response to phosphate availability.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Modern version of the uncited 1938 experiment that first observed DT fusion

Experiments are described, and results are provided, for the duplication of the first-ever triton-deuterium (colloquially referred to as DT) fusion experiment accidentally performed by A.J. Ruhlig in 1938, but forgotten in the published scientific literature. Here, we find that Ruhlig overestimated the ratio of the triton-deuterium over deuteron-deuterium neutron yields in his secondary reaction (Reaction-in-Flight) experiment compared to modern theoretical calculations and our duplication of his experiment using modern neutron detection methods. Nevertheless, Ruhlig’s observation provided the motivation for the application of DT fusion after World War II and its more recent importance in peaceful energy production at DT fusion facilities around the world. Additionally, the experimental technique used in the present work provides a novel approach for checking on low-energy triton stopping powers in deuterium containing compounds.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2018

Precise implications for real-space pair distribution function modeling of effects intrinsic to modern time-of-flight neutron diffractometers

Total scattering and pair distribution function (PDF) methods allow for detailed study of local atomic order and disorder, including materials for which Rietveld refinements are not traditionally possible (amorphous materials, liquids, glasses and nanoparticles). With the advent of modern neutron time-of-flight (TOF) instrumentation, total scattering studies are capable of producing PDFs with ranges upwards of 100–200 Å, covering the correlation length scales of interest for many materials under study. Despite this, the refinement and subsequent analysis of data are often limited by confounding factors that are not rigorously accounted for in conventional analysis programs. Furthermore, while many of these artifacts are known and recognized by experts in the field, their effects and any associated mitigation strategies largely exist as passed-down `tribal' knowledge in the community, and have not been concisely demonstrated and compared in a unified presentation. This article aims to explicitly demonstrate, through reviews of previous literature, simulated analysis and real-world case studies, the effects of resolution, binning, bounds, peak shape, peak asymmetry, inconsistent conversion of TOF to d spacing and merging of multiple banks in neutron TOF data as they directly relate to real-space PDF analysis. Suggestions for best practice in analysis of data from modern neutron TOF total scattering instruments when using conventional analysis programs are made, as well as recommendations for improved analysis methods and future instrument design.

36 MATERIALS SCIENCE↗