Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mn”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Materials Data on Mn(PO5)2 by Materials Project

Mn(PO5)2 crystallizes in the monoclinic P2_1/c space group. The structure is two-dimensional and consists of one Mn(PO5)2 sheet oriented in the (-1, 0, 2) direction. Mn is bonded to six O atoms to form MnO6 octahedra that share corners with four equivalent PO4 tetrahedra. There is two shorter (1.91 Å) and four longer (1.92 Å) Mn–O bond length. P is bonded to four O atoms to form PO4 tetrahedra that share corners with two equivalent MnO6 octahedra. The corner-sharing octahedra tilt angles range from 39–46°. There are a spread of P–O bond distances ranging from 1.54–1.57 Å. There are five inequivalent O sites. In the first O site, O is bonded in a single-bond geometry to one P atom. In the second O site, O is bonded in a single-bond geometry to one P atom. In the third O site, O is bonded in a bent 150 degrees geometry to one Mn and one P atom. In the fourth O site, O is bonded in a single-bond geometry to one Mn atom. In the fifth O site, O is bonded in a distorted bent 120 degrees geometry to one Mn and one P atom.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Facet-specific oxidation of Mn(II) and heterogeneous growth of manganese (oxyhydr)oxides on hematite nanoparticles

It is recognized that different facets of minerals vary distinctively in their chemical reactivity with aqueous solutions. However, detailed molecular and atomistic understandings of these phenomena are relatively limited. This study investigated the interaction of aqueous Mn2+ and dissolved oxygen on various facets of two morphology-types of iron oxide (hematite) nanocrystals. These interactions result in the oxidation of manganese and the heterogeneous nucleation and growth of Mn(II)/Mn(III), and Mn(III) oxides. The nanoscale morphology and atomic structure of the manganese oxide products were characterized in detail. Our results, for the first time, directly demonstrate the facet-dependent oxidation of Mn 2+ and nucleation of Mn(II/III) oxides, followed by their epitaxial growth on hematite. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and electron diffraction measurements reveal the growth of MnOx nanowires on {012} facets of both hematite nanoplates (HNP) and hematite nanocubes (HNC), while the basal {001} facets on the HNP particles do not produce precipitates. The average oxidation state of the MnO x on HNP and HNC determined using electron energy-loss spectroscopy (EELS) show that both Mn(II) and Mn(III) are present. The facet-dependent oxidation of Mn 2+ may be attributed to adsorption-induced electron transfer (ET), and hematite {001} facets generally exhibiting weaker ability in the uptake of ions relative to {012} facets, and the bulk ET from {012} to {001} facets through the conduction band of hematite. Nevertheless, the mineral composition and growth mechanisms of MnOx catalyzed by HNP and HNC are similar. High-resolution TEM analysis reveals the presence of both hausmannite and manganite on HNP and HNC. The nanoscale observations and thermodynamic considerations indicate that the growth mechanisms/processes of MnO x include heterogeneous nucleation of hausmannite nanoparticles, crystallization by particle attachment, transformation from hausmannite to manganite, and self-catalyzed MnO x growth. It is possible that all of these processes are concurrent. The crystallographic relationship between the heterogeneously formed manganite with hematite, which has not been reported before, proves that hematite provides reaction sites and functions as an atomic template for the formation of MnO x nanowires. These findings advance our understanding of the redox chemistry and heterogeneous growth of minerals as controlled by the surficial structure of the substrate mineral. This has important geochemical implications as the catalytic growth of less common, highly reactive phases like MnO x are known to be consequential in complex natural and anthropogenic environments.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Local Modulation of Single-Atomic Mn Sites for Enhanced Ambient Ammonia Electrosynthesis

Rationally tuning the local structures of single-atomic active sites for the electrocatalytic N 2 reduction reaction (NRR) remains an urgent but worthwhile research topic. Herein, we accomplish the local modulation of single-atomic Mn sites and construct single Mn–O 3 N 1 sites anchored on porous carbon (Mn–O 3 N 1 /PC) by delicately controlling the Mn–O bonding conditions. Furthermore, the constructed structures are confirmed via the combination of atomic-scale imaging, Raman spectroscopy, synchrotron radiation-based soft and hard X-ray absorption spectroscopies, and X-ray photoelectron spectroscopy. The Mn–O 3 N 1 /PC catalyst yields an NH 3 yield rate of 66.41 μg h –1 mg cat. –1 (corresponding to 1.56 mg h –1 mg Mn –1 ) at -0.35 V versus reversible hydrogen electrode, which is about four times that on the control Mn–N 4 /PC catalyst. The enhanced NRR performance is ascribed to its unique geometry and electronic structures, which not only facilitate the adsorption and activation of the N 2 molecule but also lower the free energy change of the potential-determining step.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Interface‐Controlled Redox Chemistry in Aqueous Mn 2 ⁺/MnO₂ Batteries

Manganese dioxide (MnO 2 ) deposition/dissolution (Mn 2+ /MnO 2 ) chemistry, involving a two-electron-transfer process, holds promise for safe and eco-friendly large-scale energy storage. However, challenges like electrode/electrolyte interface environment fluctuations (H + and H 2 O activity), irreversible Mn degradation, and limited understanding of degradation mechanisms hinder the reversibility of the Mn 2+ /MnO 2 conversion. This study demonstrates a vanadyl/pervanadyl (VO 2+ /VO 2 + ) redox-mediated interface designed for high-energy Mn 2+ /MnO 2 batteries. Unlike flow systems, this work uncovers, for the first time, the mechanism of a static redox-mediated interface in regulating interfacial H + and H 2 O activities. Significantly, the VO 2+ /VO 2 + chemical redox mediation targets Mn 3+ intermediates, suppressing their hydrolysis and enabling 100% Mn 2+ /MnO 2 conversion. The redox-mediated interface enhances the Mn redox electron transfer process, achieving a stable ≈95% coulombic efficiency and ultrahigh capacity of 100 mAh cm −2 with an areal energy density of 111 mWh cm −2 , outperforming flow systems. The electrode also exhibits an average specific capacity of 593 mAh g −1 , approaching the theoretical limit of 616 mAh g −1 , and a specific energy density of 721 Wh kg −1 at high MnO 2 loadings (50–150 mg cm −2 ). Furthermore, the findings highlight the critical role of interfacial redox mediation in regulating H + and H 2 O activities and underscore the significance of interface dynamics.

Xue, Xinzhe [University of California, Santa Cruz,↗
DOE OSTI2025

Flux Upcycling of Degraded Layered Cathodes to LiNi x Mn y Co z O 2 (NMCs) with Gradient Transition Metal Distribution

The rising demand for lithium-ion batteries (LIBs) has intensified the need for efficient recycling methods to address both supply chain constraints and environmental impacts. Direct upcycling, distinguished by its ability to achieve both the structural and compositional integrity of cathode materials, has gained prominence as a sustainable alternative to conventional pyrometallurgical and hydrometallurgical processes. However, the current direct upcycling methods are typically limited by incorporating Li and/or Ni, significantly constraining the adaptability across diverse LiNi x Mn y Co z O 2 (NMCs). Here, in this study, a versatile molten salt approach is reported that expands the scope of direct upcycling by enabling simultaneous incorporation of Li, Ni, and Mn. This methodology facilitates flexible conversion among diverse NMC compositions, including non-stoichiometric Co/Mn systems such as upcycling degraded LiCoO 2 (D-LCO), LiNi 1/3 Mn 1/3 Co 1/3 O 2 (D-NMC111), LiNi 0.8 Mn 0.1 Co 0.1 O 2 (D-NMC811) to surface Mn enriched NMC111, LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC532), and NMC811, respectively. The gradient transition metal distribution in upcycled products, characterized by Mn-enriched outer layers and Co/Ni-enriched cores enhances the interfacial stability of NMC cathodes, addressing critical challenges in long-term performance and structural integrity. These results highlight the potential of flux methods for advancing the upcycling of spent cathodes and producing high-performance materials for next-generation LIBs applications.

lithium -ion batteries↗
DOE OSTI2025

A Review of Medium-Mn, Low-Density Steels for Transportation Applications

Low-density steels constitute a broad and complex alloy space (Fe–Mn–Al–C) suitable for a variety of applications. In particular, there has been growing interest in duplex (ferrite + austenite) or multiphase (+ martensite, carbides) low-density steels as a lightweight, advanced high-strength steel (AHSS) for vehicle applications, spurred by extensive decarbonization efforts. Medium-Mn (med-Mn) (3 to 12 wt pct) steels with 3.5 to 10 wt pct Al additions have decreased densities, presenting an interesting opportunity for high-specific strength, intrusion-resistant, and energy-absorbing sheet components with reduced alloying contents compared to high-Mn grades like austenitic Fe–Mn–Al–C or twinning-induced plasticity steels. Compared to leaner med-Mn steels, the physical metallurgy of med-Mn, low-density steels (MMLS) is complex and distinguished by increased δ-ferrite fractions and austenite stacking fault energies, decreased martensite start temperatures, and modified phase transformation windows. Mechanical properties of MMLS are comparable to 3rd generation AHSS, attributable to the unique, multiphase microstructures, and the array of strengthening mechanisms that can be accessed. Despite this, challenges and unknowns remain with respect to their industrial implementation, and new processing routes may need to be developed. Here, this review aims to highlight the composition effects, processing methods, microstructural evolution, deformation behavior, and application properties geared toward manufacturing and performance, altogether assessing the potential of MMLS for transportation applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Enhanced negative thermal expansion of boron-doped Fe 43 Mn 28 Ga 28.97 B 0.03 alloy

Enhanced negative thermal expansion (NTE) properties are achieved by introducing a little amount of boron in the Fe 43 Mn 28 Ga 28.97 B 0.03 alloy. As a result, this alloy shows a giant NTE coefficient of alpha(1) = -79.7 x 10 -6 K -1 in a wide temperature range from 277 K to 136 K. Compared to the NTE characteristics in Fe 43 Mn 28 Ga 29 , the NTE operation temperature window has expanded by 74% with the corresponding coefficient of thermal expansion increased by 57% within the NTE temperature window for the boron-doped Fe 43 Mn 28 Ga28.97B0.03. Additionally, in-situ synchrotron high-energy X-ray diffraction results suggest that by boron substitution, the large unit cell volume change across martensitic transformation and the wide phase transition temperature interval are responsible for the pronounced NTE behavior in Fe 43 Mn 28 Ga 28.97 B 0.03 . Moreover, for the Fe 43 Mn 28 Ga 28.97 B 0.03 NTE material, the compressive strength and strain are significantly improved compared with that of Fe 43 Mn 28 Ga 29 . The present study indicates that Fe 43 Mn 28 Ga 28.97 B 0.03 with enhanced NTE across martensitic transformation may be used for practical application as thermal-expansion compensators.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tunable structural and magnetic properties of NiAs-type Mn x Sb (1.00≤x≤1.30) compounds

Mn-based alloys can exhibit a variety of magnetic properties related to their tunable exchange interactions. Here, structural and magnetic properties of hexagonal NiAs-type Mn x Sb (1.00≤x≤1.30) compounds are studied with a combination of X-ray diffraction, neutron diffraction, and magnetic measurements. It is found that the magnetization, Curie temperature, and magnetocrystalline anisotropy of Mn x Sb compounds can be tuned by controlling Mn concentration and doping at interstitial (2d) sites. With increasing Mn concentration, magnetic moments of Mn atoms decrease and deviate gradually from the ab-plane to the c-axis for 1.20≤x≤1.22 at room temperature, which leads to a decrease of the Curie temperature T c and the spin reorientation temperature T SR . By doping with nonmagnetic elements, a substantial room-temperature magnetocaloric effect without magnetic hysteresis was achieved for Mn 1.12 Zr 0.1 Sb compound, which is highly beneficial to the practical magnetic refrigeration application.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Spectroscopic characterization of Mn 2+ and Cd 2+ coordination to phosphorothioates in the conserved A9 metal site of the hammerhead ribozyme

Phosphorothioate modifications have widespread use in the field of nucleic acids. As substitution of sulfur for oxygen can alter metal coordination preferences, the phosphorothioate metal-rescue experiment is a powerful method for identifying metal coordination sites that influence specific properties in a large RNAs. The A9/G10.1 metal binding site of the hammerhead ribozyme (HHRz) has previously been shown to be functionally important through phosphorothioate rescue experiments. While an A9-S Rp substitution is inhibitory in Mg 2+ , thiophilic Cd 2+ rescues HHRz activity. Mn 2+ is also often used in phosphorothioate metal-rescue studies but does not support activity for the A9-S Rp HHRz. Here, we use EPR, electron spin-echo envelope modulation (ESEEM), and X-ray absorption spectroscopic methods to directly probe the structural consequences of Mn 2+ and Cd 2+ coordination to R p and S p phosphorothioate modifications at the A9/G10.1 site in the truncated hammerhead ribozyme (tHHRz). The results demonstrate that while Cd 2+ does indeed bind to S in the thio-substituted ligand, Mn 2+ coordinates to the non–sulfur oxo group of this phosphorothioate, regardless of isomer. Computational models demonstrate the energetic preference of Mn—O over Mn—S coordination in metal-dimethylthiophosphate models. In the case of the tHHRz, the resulting Mn 2+ coordination preference of oxygen in either R p or S p A9 phosphorothioates differentially tunes catalytic activity, with Mn—O coordination in the A9-S Rp phosphorothioate enzyme being inhibitory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Magnetic properties of ferrimagnetic Mn 3 Si 2 Se 6

The physical properties of Mn 3 Si 2 Se 6 have been investigated using single crystals grown by iodine-assisted vapor transport. Additionally, the material possesses a ferrimagnetic ground state and the properties are similar to those in the isostructural compound Mn 3 Si 2 Se 6 . Furthermore, in these trigonal materials, the dominant magnetic exchanges are antiferromagnetic and intrinsically frustrated, leading to a variety of competing ground states. In Mn 3 Si 2 Se 6 , the Curie temperature is TC = 67(1)K, which is slightly lower than that of Mn 3 Si 2 Se 6 where TC = 78K. The anisotropy field is also smaller in the selenide relative to the telluride. In both materials, short-range correlations likely exist well-above TC. Neutron single crystal diffraction data on Mn 3 Si 2 Se 6 suggest a collinear ferrimagnetic structure with the moments tilting out of the ab-plane in zero-field. Finally, the magnetization of vapor grown Mn 3 Si 2 Se 6 is shown for comparison; these vapor grown crystals do not show a sharp onset of magnetic anisotropy above 300K as was previously observed for melt grown Mn 3 Si 2 Se 6 crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Electronic, structural and magnetic properties of Mn (1+x) Pt (1-x) Sb

Electronic and magnetic properties of half-metallic Heusler alloys can be modified by tuning their chemical compositions. We have carried out a combined theoretical and experimental investigation of Mn (1+x) Pt (1-x) Sb (0 ≤ x ≤ 0.5) alloys. Our first-principles calculations indicate that the stoichiometric MnPtSb exhibits nearly half-metallic band structure, but a robust half-metallicity can be achieved in Mn-rich compositions Mn (1+x) Pt (1-x) Sb (0 ≤ x ≤ 0.5) with x = 0.25 and higher in their cubic structures. In addition, while MnPtSb exhibits ferromagnetic alignment, Mn (1+x) Pt (1-x) Sb are ferrimagnetic for all non-zero values of x. We have also synthesized cubic MnPtSb and Mn 1.25 Pt 0.75 Sb alloys using arc melting and annealing. The magnetic properties of these alloys are consistent with our theoretical predictions. Furthermore, these results indicate that the Mn-rich Mn (1+x) Pt (1-x) Sb alloys have potential for spin-transport-based devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Distribution of Mn Oxidation States in Grassland Soils and Their Relationships with Soil Pores

Manganese (Mn) is known to be an active contributor to processing and cycling of soil organic carbon (C), yet the exact mechanisms behind its interactions with C are poorly understood. Plant diversity in terrestrial ecosystems drives feedback links between plant C inputs and soil pores, where the latter, in turn, impact the redox environment and Mn. This study examined associations between soil pores (>36 μm Ø) and Mn within intact soils from two grassland ecosystems, after their >6-year implementation in a replicated field experiment. In this work, we used μ-XRF imaging and XANES spectroscopy to explore spatial distribution patterns of Mn oxidation states, combined with X-ray computed microtomography and 2D zymography. A high plant diversity system (restored prairie) increased soil C and modified spatial distribution patterns of soil pores as compared to a single species system (monoculture switchgrass). In switchgrass, the abundance of oxidized and reduced Mn oxidation states varied with distance from pores consistently with anticipated O 2 diffusion, while in the soil from restored prairie, the spatial patterns suggested that biological activity played a greater role in influencing Mn distributions. Based on the findings, we propose a hypothesis that Mn transformations promote C gains in soils of high plant diversity grasslands.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Tuning the Morphology and Electronic Properties of Single-Crystal LiNi 0.5 Mn 1.5 O 4-δ : Exploring the Influence of LiCl–KCl Molten Salt Flux Composition and Synthesis Temperature

Single-crystal materials have played a unique role in the development of high-performance cathode materials for Li batteries due to their favorable chemomechanical stability. The molten salt synthesis method has become one of the most prominent techniques used to synthesize single-crystal layered and spinel materials. In this work, the molten salt synthesis method is used as a technique to tune both the morphology and Mn 3+ content of high-voltage LiNi 0.5 Mn 1.5 O 4 (LNMO) cathodes. The resulting materials are thoroughly characterized by a suite of analytical techniques, including synchrotron X-ray core-level spectroscopy, which are sensitive to the material properties on multiple length scales. Furthermore, the multidimensional characterization allows us to build a materials library according to the molten salt phase diagram as well as to establish the relationship among synthesis, material properties, and battery performance. The results of this work show that the Mn 3+ content is primarily dependent on the synthesis temperature and increases as the temperature is increased. Additionally, the particle morphology is mostly dependent on the composition of the molten salt flux, which can be tailored to obtain well-defined octahedrons enclosed by (111) facets, plates with predominant ($11\tilde{2}$) facets, irregularly shaped particles, or mixtures of these. The electrochemical measurements indicate that the Mn 3+ content has a larger contribution to the battery performance of LNMO than do morphological characteristics and that a significant amount of Mn 3+ could become detrimental to the battery performance. However, with similar Mn 3+ contents, morphology still plays a role in influencing the battery cycle life and rate performance. The insights of molten salt synthesis parameters on the formation of LNMO, with deconvolution of the roles of Mn 3+ and morphology, are crucial to continuing studies in the rational design of LNMO cathode materials for high-energy Li batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Independent Mutation of Two Bridging Carboxylate Ligands Stabilizes Alternate Conformers of the Photosynthetic O 2 -Evolving Mn 4 CaO 5 Cluster in Photosystem II

The O 2 -evolving Mn 4 CaO 5 cluster in Photosystem II is ligated by six carboxylate residues. One of these is D170 of the D1 subunit. This carboxylate bridges between one Mn ion (Mn4) and the Ca ion. A second carboxylate ligand is D342 of the D1 subunit. This carboxylate bridges between two Mn ions (Mn1 and Mn2). D170 and D342 are located on opposite sides of the Mn 4 CaO 5 cluster. Recently, it was shown that the D170E mutation perturbs both the intricate networks of H-bonds that surround the Mn 4 CaO 5 cluster and the equilibrium between different conformers of the cluster in two of its lower oxidation states, S 1 and S 2 , while still supporting O 2 evolution at approx. 50% the rate of wild-type. In this study, we show that the D342E mutation produces much the same alterations to the cluster’s FTIR and EPR spectra as D170E, while still supporting O 2 evolution at approx. 20% the rate of wild-type. Furthermore, the double mutation, D170E + D342E, behaves similarly to the two single mutations. We conclude that D342E alters the equilibrium between different conformers of the cluster in its S 1 and S 2 states in the same manner as D170E and perturbs the H-bond networks in a similar fashion. This is the second identification of a Mn 4 CaO 5 metal ligand whose mutation influences the equilibrium between the different conformers of the S 1 and S 2 states without eliminating O 2 evolution. Finally, this finding has implications for our understanding of the mechanism of O 2 formation in terms of catalytically active/inactive conformations of the Mn 4 CaO 5 cluster in its lower oxidation states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Transition Metal Dissolution Mechanisms and Impacts on Electronic Conductivity in Composite LiNi 0.5 Mn 1.5 O 4 Cathode Films

The high-voltage LiNi 0.5 Mn 1.5 O 4 (LNMO) spinel cathode material offers high energy density storage capabilities without the use of costly Co that is prevalent in other Li-ion battery chemistries (e.g., LiNi x Mn y Co z O 2 (NMC)). Unfortunately, LNMO-containing batteries suffer from poor cycling performance because of the intrinsically coupled processes of electrolyte oxidation and transition metal dissolution that occurs at high voltage. In this work, we use operando electron paramagnetic resonance (EPR) and nuclear magnetic resonance (NMR) spectroscopies to demonstrate that transition metal dissolution in LNMO is tightly coupled to HF formation (and thus, electrolyte oxidation reactions as detected with operando and in situ solution NMR), indicative of an acid-driven disproportionation reaction that occurs during delithiation (i.e., battery charging). Leveraging the temporal resolution (s-min) of magnetic resonance, we find that the LNMO particles accelerate the rate of LiPF 6 decomposition and subsequent Mn 2+ dissolution, possibly due to the acidic nature of terminal Mn-OH groups. X-ray photoemission electron microscopy (XPEEM) provides surface-sensitive and localized X-ray absorption spectroscopy (XAS) measurements, in addition to X-ray photoelectron spectroscopy (XPS), that indicate disproportionation is enabled by surface reconstruction upon charging, which leads to surface Mn 3+ sites on the LNMO particle surface that can disproportionate into Mn 2+ (dissolved) and Mn 4+ (s) . During discharge of the battery, we observe high quantities of metal fluorides (in particular, MnF 2 ) in the cathode electrolyte interphase (CEI) on LNMO as well as the conductive carbon additives in the composite. Electronic conductivity measurements indicate that the MnF 2 decreases film conductivity by threefold compared to LiF, suggesting that this CEI component may impede both the ionic and electronic properties of the cathode. Ultimately, to prevent transition metal dissolution and the associated side reactions in spinel-type cathodes (particularly those that operate at high voltages like LNMO), the use of electrolytes that offer improved anodic stability and prevent acid byproducts will likely be necessary.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Anomalous transport due to Weyl fermions in the chiral antiferromagnets Mn 3 X, X = Sn, Ge

The recent discoveries of strikingly large zero-field Hall and Nernst effects in antiferromagnets Mn 3 X(X = Sn, Ge) have brought the study of magnetic topological states to the forefront of condensed matter research and technological innovation. These effects are considered fingerprints of Weyl nodes residing near the Fermi energy, promoting Mn 3 X(X = Sn, Ge) as a fascinating platform to explore the elusive magnetic Weyl fermions. In this review, we provide recent updates on the insights drawn from experimental and theoretical studies of Mn 3 X(X = Sn, Ge) by combining previous reports with our new, comprehensive set of transport measurements of high-quality Mn 3 Sn and Mn 3 Ge single crystals. In particular, we report magnetotransport signatures specific to chiral anomalies in Mn 3 Ge and planar Hall effect in Mn 3 Sn, which have not yet been found in earlier studies. The results summarized here indicate the essential role of magnetic Weyl fermions in producing the large transverse responses in the absence of magnetization.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

The striking influence of oxophilicity differences in heterometallic Mo–Mn oxide cluster reactions with water

Mixed-metal oxides have proven to be effective catalysts for the hydrogen evolution reaction, often outperforming either of the binary metal oxides. The reactivity of Mn x MoO y - (x = 1, 2; y = 3, 4) clusters toward H 2 O was investigated via time-of-flight mass spectrometry with clear evidence of cluster oxidation and corresponding H 2 production, specifically for Mn x MoO 3 - (x = 1, 2) clusters. Unlike previously studied MoxOy- clusters, which assumed a broad distribution of stoichiometries (typically x ≤ y ≤ 3x), both MnMoOy- and Mn 2 MoO y - preferentially formed y = 3 and 4 compositions in significant quantities under our source conditions. The electronic and molecular structures of the Mn x MoO y (x = 1, 2; y = 3, 4) anion and neutral clusters were probed with anion photoelectron spectroscopy and analyzed with supporting density functional theory calculations. Our studies suggest that both metal centers are involved in initial cluster–water complex formation, while Mo is the center that undergoes oxidation; hence, reactivity terminates when Mo is saturated in its highest oxidation state of +6. Across these four clusters, Mn remains relatively reduced and is stable in a high-spin electronic configuration. The preferential reactivity of water molecules toward the Mo center rather than Mn is rationalized by the much lower relative oxophilicity of Mn.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

First-principles insight into all-optical spin switching in the half-metallic Heusler ferrimagnet Mn 2 RuGa

All-optical spin switching (AOS) represents a new frontier in magnetic storage technology—spin manipulation without a magnetic field—but its underlying working principle is not well understood. Many AOS ferrimagnets such as GdFeCo are amorphous and renders the high-level first-principles study unfeasible. The crystalline half-metallic Heusler Mn 2 RuGa presents an opportunity. Here we carry out hitherto the comprehensive density functional investigation into the material properties of Mn 2 RuGa, and introduce two concepts—the spin anchor site and the optical active site—as two pillars for AOS in ferrimagnets. In Mn 2 RuGa, Mn(4a) serves as the spin anchor site, whose band is below the Fermi level and has a strong spin moment, while Mn(4c) is the optical active site whose band crosses the Fermi level. Our magneto-optical Kerr spectrum and band structure calculation jointly reveal that the delicate competition between the Ru-4d and Ga-4p states is responsible for the creation of these two sites. Furthermore these two sites found here not only present a unified picture for both Mn 2 RuGa and GdFeCo, but also open the door for future applications. Specifically, we propose a Mn 2 Ru x Ga-based magnetic tunnel junction where a single laser pulse can control magnetoresistance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗