Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Microwave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Parasitic Modulation of Microwave Signals by a Hypersonic Plasma Layer

During hypersonic flight, compressional and viscous heating of the air can form a plasma layer which encases the aircraft. If the boundary layer becomes turbulent, then the electron density fluctuations can effect a parasitic modulation in microwave signals transmitted through the plasma. We developed an approach for studying the interaction of microwave signals with a turbulent, hypersonic plasma layer. The approach affords a great deal of flexibility in both the plasma layer model and the antenna configuration. We then analyzed a situation in which microwaves, transmitted from a rectangular aperture antenna, propagate through a turbulent plasma layer to a distant receiver. We characterized the first-and second-order statistics of the computed parasitic modulation and quantified the depolarization of the signal. The amplitude fluctuations are lognormally distributed at low frequencies and Rice-distributed at high frequencies. Fluctuations in the copolarized phase and amplitude of the far-field signal are strongly anticorrelated. Here, we used a multioutput Gaussian process (MOGP) to model these quantities. The efficacy of the MOGP model is demonstrated by recovering the time evolution of the copolarized phase given the copolarized amplitude and occasional measurements of the phase.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Microwave-Assisted Preparation of Luminescent Inorganic Materials: A Fast Route to Light Conversion and Storage Phosphors

Luminescent inorganic materials are used in several technological applications such as light-emitting displays, white LEDs for illumination, bioimaging, and photodynamic therapy. Usually, inorganic phosphors (e.g., complex oxides, silicates) need high temperatures and, in some cases, specific atmospheres to be formed or to obtain a homogeneous composition. Low ionic diffusion and high melting points of the precursors lead to long processing times in these solid-state syntheses with a cost in energy consumption when conventional heating methods are applied. Microwave-assisted synthesis relies on selective, volumetric heating attributed to the electromagnetic radiation interaction with the matter. The microwave heating allows for rapid heating rates and small temperature gradients yielding homogeneous, well-formed materials swiftly. Luminescent inorganic materials can benefit significantly from the microwave-assisted synthesis for high homogeneity, diverse morphology, and rapid screening of different compositions. The rapid screening allows for fast material investigation, whereas the benefits of enhanced homogeneity include improvement in the optical properties such as quantum yields and storage capacity.

59 BASIC BIOLOGICAL SCIENCES↗

Predicting Solar Cell Performance from Terahertz and Microwave Spectroscopy

Abstract Mobilities and lifetimes of photogenerated charge carriers are core properties of photovoltaic materials and can both be characterized by contactless terahertz or microwave measurements. Here, the expertise from fifteen laboratories is combined to quantitatively model the current‐voltage characteristics of a solar cell from such measurements. To this end, the impact of measurement conditions, alternate interpretations, and experimental inter‐laboratory variations are discussed using a (Cs,FA,MA)Pb(I,Br) 3 halide perovskite thin‐film as a case study. At 1 sun equivalent excitation, neither transport nor recombination is significantly affected by exciton formation or trapping. Terahertz, microwave, and photoluminescence transients for the neat material yield consistent effective lifetimes implying a resistance‐free JV‐curve with a potential power conversion efficiency of 24.6 %. For grainsizes above ≈20 nm, intra‐grain charge transport is characterized by terahertz sum mobilities of ≈32 cm 2 V −1 s −1 . Drift‐diffusion simulations indicate that these intra‐grain mobilities can slightly reduce the fill factor of perovskite solar cells to 0.82, in accordance with the best‐realized devices in the literature. Beyond perovskites, this work can guide a highly predictive characterization of any emerging semiconductor for photovoltaic or photoelectrochemical energy conversion. A best practice for the interpretation of terahertz and microwave measurements on photovoltaic materials is presented.

14 SOLAR ENERGY↗

Microwave Annealing for Fast and Effective Hydrogen Activation in Polycrystalline Silicon Passivating Contacts

Hydrogenation is a crucial step in the fabrication of high-efficiency silicon solar cells. In this study, the effectiveness of hydrogen activation is demonstrated via microwave annealing of hydrogen-rich dielectrics coated on poly-Si passivating contacts. This method is compared with conventional hydrogenation techniques, such as annealing in N2 in the presence of a hydrogen-rich source (such as hydrogenated aluminum oxide (AlOx:H), hydrogenated silicon nitride (SiNy:H), or a AlOx:H/SiNy:H stack). Key improvements observed include a reduction in J0 from 30 to <5 fA cm-2, an increase in iVoc from 690 to >730 mV, and an enhancement in effective lifetime (teff) from 0.6 to ~3.5 milliseconds on phosphorus-doped poly-Si/SiO2 passivating contact samples. With a very short annealing time of ~1-2 min, the samples passivated by AlOx:H, SiNy:H, or the stack show similar performance to samples subjected to 30 min of nitrogen annealing. Photoluminescence (PL) spectra corroborate the findings regarding the hydrogenation of the poly-Si layer and the c-Si substrate, with an increase in PL intensity after microwave annealing. Ultimately, this work suggests that microwave annealing could be a promising addition, offering flexibility to traditional firing hydrogenation processes.

hydrogenation↗

Microwave-enhanced catalytic ammonia synthesis under moderate pressure and temperature

In this study, an alternative approach based on microwave-enhanced ammonia synthesis for Haber-Bosch process was carried out under moderate pressure of 0.1–0.65 MPa and temperature range of 280–400 °C over a stable CsRu/CeO 2 catalyst. The ammonia production rate is significantly improved under microwave conditions. At 0.65 MPa and 320 °C, maximum ammonia production rate was achieved at H 2 /N 2 ratio of 1/1. Stable performance was obtained in a 6-cycles of startup-shutdown operation for cumulative on-line time of 80 h. The work demonstrates the potential of microwave catalytic technology for the distributed ammonia synthesis using renewable power having intermittent nature of energy supply.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intuitive study on the effect of support morphology over Cs-Ru/CeO 2 catalyst for microwave-initiated ammonia synthesis

Microwave-initiated ammonia synthesis is a potential candidate to the current Haber-Bosch process that can operate from stranded renewable energy source. Our previous studies indicated Cs-Ru/CeO 2 is a promising catalyst for microwave-assisted ammonia synthesis and the morphology of CeO 2 significantly affects the catalytic performance. In this paper, CeO 2 support with distinct morphologies nanorod, nanoparticle, and microstructure, is studied comprehensively at ambient pressure and low temperature under microwave irradiation. Moreover, CeO 2 nanorods of various sizes were synthesized at different timing (24, 36, and 48 h). Nanorods synthesized at 36 h exhibited superior activity associated to high dispersion and small Ru particle size.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microwave-Assisted Reactive CO 2 Capture with the SrCO 3 -Graphite System

This study details the initial development of a microwave heat-driven reactive CO 2 capture (RCC) process using the SrO/SrCO 3 cycle and graphitic carbon to absorb ppm-levels of CO 2 from humidified room temperature air and selectively convert it into CO. By combining first-principles density functional theory (DFT) simulations with thermogravimetric analysis (TGA) and X-ray diffraction (XRD) verification, it is demonstrated that SrO spontaneously absorbs moisture to generate Sr(OH) 2 followed by Sr(OH) 2 *1H 2 O, which then can spontaneously react with atmospheric levels of CO 2 to form SrCO 3 . The resulting SrCO 3 can then react with solid carbon at elevated temperatures to selectively produce CO and regenerate SrO. Graphitic carbon is an excellent microwave absorber that can quickly generate temperatures approaching 1000 °C and then cool to room temperature within minutes, potentially allowing for integration with intermittent electricity. It is shown that using microwaves to selectively heat a mixture of graphitic carbon and SrCO 3 produced CO with 85 ± 3% selectivity and stable performance over ten cycles. The rapid heating for release and room temperature CO 2 uptake processes appeared to prevent performance loss from particle sintering typically observed with traditional thermal systems. In conclusion, these results demonstrate a new RCC approach that adds to the growing number of potential technologies available for converting CO 2 to useful chemicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deactivation of Mo/H-ZSM-5 in Microwave-Assisted and Thermal-Driven Methane Dehydroaromatization

A better understanding of catalyst deactivation is needed to improve catalyst design and performance in microwave-enhanced methane dehydroaromatization (MDA). Here, this study investigates the deactivation of a molybdenum supported H-ZSM-5 zeolite (Mo/H-ZSM-5) catalyst in MDA under microwave-heated conditions, comparing its performance to that of the same catalyst under conventional heating. While the microwave-assisted (MW) process achieved higher benzene yields, the catalyst experienced faster deactivation due to the selective and rapid deposition of coke within the pores of the zeolite, as confirmed through Brunauer–Emmett–Teller (BET), X-ray diffraction (XRD), ammonia-temperature programmed desorption (NH 3 -TPD), thermal gravimetric analysis (TGA), temperature programmed oxidation (TPO), and X-ray photoelectron spectroscopy (XPS) analyses. The quantification of total coke content via TGA/TPO and surface carbon (XPS) revealed that nearly twice as much coke was deposited on the catalyst under MW conditions compared to that on the conventionally heated material, and the coke exhibited a more conductive and graphitic nature. The accelerated deactivation rates were attributed to the formation of hot spots in the MW system, leading to enhanced coupling with coke formed in situ during the reaction and resulting in increased Mo reduction. Observations indicated that the CO activation used to carburize the catalyst prior to the reaction is not advantageous in the MW heating environment. The presence of large amounts of Mo oxides at elevated temperatures (through hot spots) exposed to methane leads to instability under the reaction conditions. Optimizing the activation environment and improvement of the Mo dispersion within the pores are potential strategies to improve catalyst stability.

Mo/H-ZSM-5 zeolite↗

On-Chip Single-Layer Integration of Diamond Spins with Microwave and Plasmonic Channels

On-chip scalable integration represents a major challenge for practical quantum devices. One particular challenge is to implement on-chip optical readout of spins in diamond. This readout requires simultaneous application of optical and microwave fields along with the efficient collection of fluorescence. These requirements are typically met using bulk optical components and dedicated microwave lines. Here, we experimentally demonstrate an on-chip integrated interface for diamond nitrogen vacancy (NV) spin-state preparation and readout, implemented in a planar single layer with only one patterning step. A nanodiamond with NV centers is positioned inside a v-groove waveguide milled in a thick gold film. The gold film carries the microwave control signal, while the v-groove acts as a fluorescence collector and, potentially, as an integrated pump filter. Hence, the device dimensions and fabrication complexity are substantially reduced. Our approach fosters further development of ultracompact nanoscale quantum sensors and quantum information processing devices on a monolithic platform.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unidirectional microwave transduction with chirality selected short-wavelength magnon excitations

Nonreciprocal magnon propagation has recently become a highly potential approach of developing chip-embedded microwave isolators for advanced information processing. However, it is challenging to achieve large nonreciprocity in miniaturized magnetic thin-film devices because of the difficulty of distinguishing propagating surface spin waves along the opposite directions when the film thickness is small. In this work, we experimentally realize unidirectional microwave transduction with sub-micrometer-wavelength propagating magnons in a yttrium iron garnet (YIG) thin-film delay line. We achieve a non-decaying isolation of 30 dB with a broad field-tunable bandpass frequency range up to 14 GHz. The large isolation is due to the selection of chiral magnetostatic surface spin waves with the Oersted field generated from the coplanar waveguide antenna. Increasing the geometry ratio between the antenna width and YIG thickness drastically reduces the nonreciprocity and introduces additional magnon transmission bands. Furthermore, our results pave the way for on-chip microwave isolation and tunable delay line with short-wavelength magnonic excitations.

36 MATERIALS SCIENCE↗

Generating and Sustaining Microplasma with Microwaves (Final Report)

Plasma can be generated in spaces ranging in size from astronomical down to the microscopic. The physics that describes the gas breakdown is different at each size scale. The dominant physical phenomenon also depends on the type of electromagnetic field that drives the breakdown – static, AC, RF, microwave, visible. This project, staffed by undergraduate researchers and their mentor, focused on plasma generated in the size range of 10 to 500 micrometers using microwave energy. This project was motivated by the prior observation that plasma can only be generated in microgaps when the gas is above a certain gap-dependent pressure, here called the transition pressure. A microwave-driven microgap was designed and constructed in this project and then used to measure the electric field required to initiate plasma over a wide range of pressures from 0.1 Torr to 760 Torr (1 atmosphere).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Exploration of Electronic and Magnetic Properties of Ceria for Applications of Microwave Assisted Catalysis

This was presented at APS Global Physics Summit 2025 in Anaheim, CA. This study focuses on characterizing how vacancies and other dopants influence the electronic and magnetic properties of ceria and exploring the potential mechanisms by which these properties affect or control its catalytic behavior under microwave radiation. By examining ceria’s electronic response to external electromagnetic fields, specifically magnetic fields within the microwave range, the work aims to uncover insights into how microwaves might optimize catalytic effects. The study also includes a comparative analysis of different functionals to refine understanding of ceria’s electronic behavior and catalytic efficacy in these applications.

ammonia synthesis↗

The Effect of Metal Promoters in an Mo-Supported HZSM-5 Catalyst for Microwave-Assisted Methane Dehydroaromatization to Aromatics

Microwave (MW)-assisted methane dehydroaromatization (MDHA) using an Mo-supported HZSM-5 catalyst (Mo/HZ5) can convert methane into value-added aromatic products in modular microwave reactor systems, enabling producers to generate revenue from an otherwise wasted resource. Modifying the local environments of active Mo species with metal promoters potentially regulates the reaction/deactivation pathways and improves the heating properties of the Mo/HZ5 under microwaves. Herein, metal promoters (M), including monovalent K+ and bivalent Co2+ and Ni2+, were incorporated to form M-Mo/HZ5 and their MDHA performance was investigated.

metal promoters↗

Microwave-Assisted Activation of Mo/HZSM5 in Methane Dehydroaromatization

Natural gas flaring is a significant challenge for oil and gas producers. One viable option to mitigate flaring is the conversion of natural gas into valuable chemicals. Applying microwave energy to heterogenous catalyst materials offers advantages in terms of higher rates and product selectivities in comparison to traditional thermal systems which can be designed for on-demand chemical production in modular reactor systems. Methane dehydroaromatization (MDHA) produces transportable, liquid aromatic products directly from natural gas, which is ideal for remote production but is hindered by low thermodynamic yields and rapid deactivation. The stability and performance of the Mo/ZSM5 catalyst is often determined by the state and nature of Mo in the catalyst, which in turn is dictated by the temperature and gaseous environment during catalyst activation. In this study, the Mo/HZSM5 catalyst was activated under three different heating modes (thermal, microwave E-field, and microwave H-field) and four different gas environments (CO, He, CH4+H2, and H2). All the activated catalysts were characterized using different tools and performance evaluated in MDHA.

methane dehydroaromatization↗

Poly-Si Passivating Contacts Hydrogenation by Microwave Annealing

Hydrogenation is a crucial step in the fabrication of high-efficiency silicon solar cells. In this study, we demonstrate the for the first time effectiveness of hydrogen activation via microwave annealing of hydrogen-rich dielectrics coated on poly-Si passivating contacts. This method is compared with conventional hydrogenation techniques, such as annealing in N2 in the presence of a hydrogen-rich source (such as hydrogenated aluminum oxide (AlOx:H), hydrogenated silicon nitride (SiNy:H), or a AlOx:H/SiNy:H stack). Key improvements observed include a reduction in J0 from 30 to <5 fA/cm2, an increase in iVoc from 690 to >730 mV, and an enhancement in effective lifetime (teff) from 0.6 to ~3.5 milliseconds on phosphorus-doped poly-Si/SiO2 passivating contact samples. With a very short annealing time of ~1-2 minutes, the samples passivated by AlOx:H, SiNy:H, or the stack show similar performance to samples subjected to 30 minutes of nitrogen annealing. Photoluminescence (PL) spectra corroborate our findings regarding the hydrogenation of the poly-Si layer and the c-Si substrate, with an increase in PL intensity after microwave annealing. Ultimately, our work suggests that microwave annealing could be a promising addition, offering flexibility to traditional firing hydrogenation processes.

14 SOLAR ENERGY↗

Effect of Mo precursors in Microwave-assisted Methane Dehydroaromatization over Mo/HZSM5 catalysts

Natural gas flaring occurs in remote shale regions due to limited pipeline takeaway capacity. The conversion of the associated natural gas into aromatics in modular microwave reactors is a viable alternative to monetize the wasted gas. Microwaves offer rapid, selective heating in compact reactor systems that can enable on-demand chemical production at the well-site. Mo-HZSM-5 catalysts are widely used for aromatic production, but the location and nature of the active sites are still under debate. This study focuses on the use of 6 different Mo precursors to elucidate insights into the Mo properties that are desirable for BTX production. The catalysts were characterized by different methods (XPS, TPR, Raman, etc) to determine differences in Mo catalytic properties that may affect performance and understand these differences through performance testing under microwave at 700C for methane dehydroaromatization. Metal precursors that enable a better distribution of Mo into the pores and over the surface lead to improved benzene yield, whereas those that limited Mo to primarily the surface suffer rapid deactivation and low benzene yields. Additionally, strong Lewis acidity that arises from the sodium containing precursor drastically shifts the product selectivity towards dehydrogenation, which produces more ethylene and carbon. This catalyst had the highest deactivation constant of all catalysts tested.

gas flaring reduction↗

Negative Index Metamaterial Lens for Subwavelength Microwave Detection

Metamaterials are engineered periodic structures designed to have unique properties not encountered in naturally occurring materials. One such unusual property of metamaterials is the ability to exhibit negative refractive index over a prescribed range of frequencies. A lens made of negative refractive index metamaterials can achieve resolution beyond the diffraction limit. This paper presents the design of a metamaterial lens and its use in far-field microwave imaging for subwavelength defect detection in nondestructive evaluation (NDE). Theoretical formulation and numerical studies of the metamaterial lens design are presented followed by experimental demonstration and characterization of metamaterial behavior. Finally, a microwave homodyne receiver-based system is used in conjunction with the metamaterial lens to develop a far-field microwave NDE sensor system. A subwavelength focal spot of size 0.82λ was obtained. The system is shown to be sensitive to a defect of size 0.17λ × 0.06λ in a Teflon sample. Consecutive positions of the defect with a separation of 0.23λ was resolvable using the proposed system.

47 OTHER INSTRUMENTATION↗

High efficiency compact microwave sources using electrostatic potential depression

In this article, we report theoretical and design studies on the application of an electrostatic potential depression (EPD) on two types of traditional microwave sources, the klystron and the inductive output tube (IOT), both operating in the UHF band. Additionally, the EPD is implemented by a section of the metallic beam pipe on which a direct current (dc) negative high voltage is applied. Inside the EPD section, the modulated electron beam develops into bunches over a very short longitudinal distance, indicating a possible design approach for a compact device. With the application of an EPD, the peak value of the first harmonic current in a microwave tube can be further increased compared to that in a conventional design, suggesting higher circuit efficiency. As the electron beam leaves the EPD section, the reacceleration of the beam provides a longitudinal cooling effect. With the addition of an EPD, circuit power extraction efficiency above 80% is achieved in both the modified design of the IOT and the novel conceptual circuit design of the klystron.

42 ENGINEERING↗