Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Melting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Electrical conductivity measurements on silicate melts using the loop technique

A new method is described for measurement of the electrical conductivity of silicate melts under controlled oxygen partial pressure at temperatures to 1550 C. The melt samples are suspended as droplets on platinum-rhodium loops, minimizing iron loss from the melt due to alloying with platinum, and providing maximum surface exposure of the melt to the oxygen-buffering gas atmosphere. The latter provides extremely rapid equilibration of the melt with the imposed oxygen partial pressure. The loop technique involves a minimum of setup time and cost, provides reproducible results to within + or - 5% and is well suited to electrical conductivity studies on silicate melts containing redox cations.

Waff, H. S.↗
NASA NTRS1976

Compositional interrelationships of mare basalts from bulk chemical and melt inclusion studies

Petrographic and electron microprobe data (355 new analyses) are presented on melt inclusions and their host phases found in a reexamination of the Apollo thin section collection. In addition, occurrences of early armalcolite and ilmenite are described and new data are presented on quench-pyroxene compositions and melt inclusions in chromian ulvospinel. Compositional differences between mare basalt types and their melt inclusions are illustrated with plots of compositions normalized to a terrestrial lava composition, that of the 1965 Makaopuhi lava lake. The plots emphasize the fact that mare basalts are not significantly differentiated relative to the compositions that are possible as defined by the melt inclusion data. Distribution coefficients for Fe and Mg partitioning between trapped melt and host olivine and ilmenite are calculated and show a range about probable equilibrium values. It is suggested that the crystallization sequence olivine-ilmenite-plagioclase-pyroxene defined by the melt inclusion data may be the actual sequence which obtained generally for Apollo 11 and 17 mare basalts just prior to eruption.

Weiblen, P. W.↗
NASA NTRS1978

Petrogenesis of melt rocks, Manicouagan impact structure, Quebec

It is suggested, on the basis of previous theoretical studies of shock waves, that the Manicouagan melt formed in 1 or 2 s in a 5-km-radius hemisphere near the point of impact. The melt and the less shocked debris surrounding it flowed downward and outward for a few minutes until the melt formed a lining of a 5- to 8-km deep, 15- to 22-km-radius cavity. Extremely turbulent flow thoroughly homogenized the melt and promoted the incorporation and progressive digestion of debris that had been finely fragmented (but not melted) to grain sizes of less than one mm by the passage of the shock waves. The equilibration of clasts and melt, plagioclase nucleation, and readjustment of the crater floor are discussed.

Simonds, C. H.↗
NASA NTRS1977

The petrology and geochemistry of impact melts, granulites, and hornfelses from consortium breccia 61175

The matrix and 58 clasts from breccia 61175 were analyzed for major, minor, and trace elements. The matrix is anorthositic and has lithophile trace element abundances 20 to 40 times chondrite. Clasts comprise impact melt rocks, xenocryst and xenolith-free very high aluminum (VHA) and anorthositic basalts, anorthosite, anorthosite-norite-troctolite granulites, and hornfelses. The VHA and anorthositic basalts are considered to be impact melts, and the hornfelses were probably formed by incorporation of breccias or preexisting melt rocks into a melt sheet prior to cooling. The range of melt-rock lithophile trace element abundances might indicate more than one melt sheet.

Winzer, S. R.↗
NASA NTRS1977

Dynamical implications of the petrology and distribution of impact melt rocks

Petrographic and structural relations of rocks resulting from melting of target materials during impact indicate constraints that can be applied to theoretical models and experimental production of craters. Topics discussed in this context include the motion of shock melted material, the mixing of melts, the energies required for heating and melting the necessary volumes of target rocks, diameter to depth ratios, and the formation of structural modifications. The motion of shock melted material involves ejection of some of the lowermost parts of the target, incorporation of distant fragmental material, outward flow, settling into cracks after breccia formation, and completion in a short time span. Melts must be completed within tens of seconds to a couple of minutes after impact.

Phinney, W. C.↗
NASA NTRS1980

Lunar highland melt rocks - Chemistry, petrology and silicate mineralogy

A selected suite containing several of the largest samples of lunar highland melt rocks includes impact melt specimens (anorthositic gabbro, low-K Fra Mauro) and volcanic specimens (intermediate-K Fra Mauro). Although previous assumptions of LKFM volcanism have fallen into disfavor, no fatal arguments against this hypothesis have been presented, and the evidence of a possibly 'inherited igneous' olivine-plagioclase cosaturation provides cause for keeping a volcanic LKFM hypothesis viable. Comparisons of silicate mineralogy with melt rock compositions provide information on the specimen's composition and cooling history. Plagioclase-rock compositions can be matched to the experimentally determined equilibria for appropriate samples to identify melt rocks with refractory anorthitic clasts. Olivine-rock compositions indicate that melt rock vitrophyres precipitate anomalously Fe-rich olivine; the cause of this anomaly is not immediately evident. The Al-Ti and Ca-Fe-Mg zonation in pyroxene provide information on relative cooling rates of highland melt rocks, but Cr- and Al-content (where Al-rich low-Ca pyroxene cores are preserved in rapidly cooled samples) can be correlated with composition of the host rock.

Vaniman, D. T.↗
NASA NTRS1981

Influence of CO2 on melting of model granulite facies assemblages - A model for the genesis of charnockites

It is shown that partial melting studies at crustal pressures in SiO2-rich portions of the system KAlSiO4-Mg2SiO2-H2O-CO2 can be used in modeling the anatectic origin of charnockites. The univariant reaction phlogopite + sanidine + quartz + vapor = enstatite + liquid yields an SiO2-rich melt (granite analog) at 3 kbar; the vapor composition at the solidus is buffered to high H2O contents by virtue of the coexistence of phlogopite with its breakdown products. With higher pressures (8 and 15 kbar), the fluid phase is buffered to higher CO2 contents and the melt composition becomes enriched in K2O and MgO (charnockite analog). Melting relations are controlled through the expansion of the quartz liquidus field relative to the enstatite and sanidine fields with increasing pressure. It is noted that partial melts generated at the base of the crust in the presence of CO2-rich fluid will be of an alkaline nature and will crystallize enstatite at lower pressures. CO2-saturated melting of similar SiO2-rich bulk compositions (phlogopite-absent) through the reaction enstatite + sanidine + quartz + CO2 - liquid occurs at temperatures above 1000 C to about 15 kbar.

Wendlandt, R. F.↗
NASA NTRS1983

Lithification opf gas-rich chondrite regolith breccias by grain boundary and localized shock melting

The fine-grained matrices (less than 150 microns) of 14 gas-rich ordinary chondrile regolith breccias were studied in an attempt to decipher the nature of the lithification process that converted loose regolith material into consolidated breccias. It is found that there is a continuouos gradation in matrix textures from nearly completely clastic (class A) to highly cemented (class C) breccias in which the remining clasts are completely surrounded by interstitial, shock-melted material. It is concluded that this interstitial material is formed by shock melting in the porous regolith. In general, the abundances of solar-wind-implanted He-4 and Ne-20 are inversely correlated with the abundance of intenstitial, shock-melted, feldspathic material. Chondrites with the highest abundance of interstitial, melted material (class C) experienced the highest shock pressures and temperatures and suffered the most extensive degassing. It is this interstitial, feldspathic melt that lithifies and cements the breccias together; those breccias with very little interstitial melt (class A) are the most porous and least consolidated.

Bischoff, A.↗
NASA NTRS1985

Impact melt products of chondritic material

Experimental data concerning impact melting processes in chondritic material are reviewed. It is shown that a large variety of objects in chondritic meteorites could have formed as a result of impact melting, including: shock veins; metal-troilite mixtures; metal and sulfide nodules; melt pockets and vugs. The type of object produced in an impact melt is related to the interaction of the shock waves with the particular target rock. It is suggested that various iron meteorites (including groups IAB, IIICD, and IIE, as well as several ungrouped irons) were formed from individual melt pools in chondritic regoliths. The small-scale structure of impact-melted metallic Fe,Ni and troilite in Weston (H chondrite regolith breccia) is illustrated in a photograph.

Rubin, A. E.↗
NASA NTRS1985

Partially confined configuration for the growth of semiconductor crystals from the melt in zero-gravity environment

A novel partially confined configuration is proposed for the crystal growth of semiconductors from the melt, including those with volatile constituents. A triangular prism is employed to contain the growth melt. Due to surface tension, the melt will acquire a cylindrical-like shape and thus contact the prism along three parallel lines. The three empty spaces between the cylindrical melt and the edges of the prism will accommodate the expansion of the solidifying semiconductor, and in the case of semiconductor compounds with a volatile constituent, will permit the presence of the desired vapor phase in contact with the melt for controlling the melt stoichiometry. Theoretical and experimental evidence in support of this new type of confinement is presented.

Lagowski, J.↗
NASA NTRS1986

Microwave absorption measurements of melting spherical and nonspherical hydrometeors

Measurements were made of the absorption behavior of melting and freezing hydrometeors using resonant cavity perturbation techniques at a wavelength of 2.82 cm. Melting ice spheres with equivalent melted diameters between 1.15 and 2.00 mm exhibit a period of strong absorption during melting as predicted by prior theoretical calculations. However, the measured magnitude of the absorption peak exceeds the predicted value. Absorption measuremets of melting oblate and prolate ice ellipsoids also exhibit enhanced absorption during melting.

Hansman, R. J., Jr.↗
NASA NTRS1988

Tektites: Origin as melts produced by the impact of small projectiles onto dry targets

The formation of tektites in general and layered tektites in particular seems to require a very special kind of cratering event. Evidence for the formation of pools of melt free of unmelted clasts has not been reported for the well-studied terrestrial craters such as Manicouagan or Ries. It is suggested that large amounts of relict-free melt were produced only when a sizeable fraction of the cratered target consisted of dry, high-porosity materials such as aeolian sediments. Since dry, high-porosity target materials are always confined to the outer 100 to 200 m of the Earth, the fraction of melt produced melt is probably higher in small (radius 50 to 500 m) craters than in large (r greater than 1 km) craters. Another reason to infer that the Southeast Asian tektites were produced in a multitude of small craters is the wide distribution of layered tektites. The file spans at least 1200 km, which would require ballistic ejection at velocities greater than 2 km s(-1) if all melt was generated in a single crater. It seems impossible to devise a scenario that would lead to the deposition of primary melt as a crystal-free pool at a distance of 600 km from the crater.

Wasson, John T.↗
NASA NTRS1988

The surface morphology of crystals melting under solutions of different densities

Examples of solids melting beneath liquids are described for cases where the bulk liquid volume is stabilized against convection by a positive vertical temperature gradient, either with, or without local density inversion at the melting interface. The examples include ice melting beneath brine or methanol solutions and tin or lead melting under molten Sn-20 wt pct Pb or Pb-20 wt pct Sn, respectively. Without density inversion the melting is slow, purely diffusion controlled and the interfaces are smooth; with convection assisted melting the rate increases by some two orders of magnitude and the interfaces develop a rough profile - in the case of ice both irregular and quasi-steady state features are observed. The observations are discussed in terms of prevailing temperature and concentration gradients.

Fang, Dacheng↗
NASA NTRS1989

Chemistry and petrology of Apollo 17 highland coarse fines - Plutonic and melt rocks

A suite of 21 fragments from the Apollo 17 coarse-fines consists of ferroan anorthosites, anorthositic gabbros, granulitic and regolith breccias, and impact melts. These samples belong to known petrographic and chemical groups. Three ferroan anorthosites were found, including one which appears to be the lowest in REE (La = 0.60X) and probably the purest of the Apollo 17 anorthosites identified thus far. The ferroan suite is a more important component at the Apollo 17 site than previously recognized. The Apollo 17 melt rocks are similar to other samples with LKFM and low-K KREEP compositions and show less diversity in trace elements (REE) than the Apollo 15 melt rocks. Apollo 17 melt rocks consist of aphanitic and poikilitic types that show some compositional variability with identical Ni/Ir, suggesting that either two distinct melt sheets formed by similar projectiles, or compositional heterogeneity within one melt sheet is possible.

Laul, J. C.↗
NASA NTRS1989

Precipitation strengthened high strength, high conductivity Cu-Cr-Nb alloys produced by chill block melt spinning

A series of Cu-based alloys containing 2 to 10 a/o Cr and 1 to 5 a/o Nb were produced by chill block melt spinning (CBMS). The melt spun ribbons were consolidated and hot rolled to sheet to produce a supersaturated Cu-Cr-Nb solid solution from which the high melting point intermetallic compound Cr2Nb could be precipitated to strengthen the Cu matrix. The results show that the materials possess electrical conductivities in excess of 90 percent that of pure Cu at 200 C and above. The strengths of the Cu-Cr-Nb alloys were much greater than Cu, Cu-0.6 Cr, NARloy-A, and NARloy-Z in the as-melt spun condition. The strengths of the consolidated materials were less than Cu-Cr and Cu-Cr-Zr below 500 C and 600 C respectively, but were significantly better above these temperatures. The strengths of the consolidated materials were greater than NARloy-Z, at all temperatures. The GLIDCOP possessed similar strength levels up to 750 C when the strength of the Cu-Cr-Nb alloys begins to degrade. The long term stability of the Cu-Cr-Nb alloys was measured by the microhardness of aged samples and the growth of precipitates. The microhardness measurements indicate that the alloys overage rapidly, but do not suffer much loss in strength between 10 and 100 hours which confirms the results of the electrical resistivity measurements taken during the aging of the alloys at 500 C. The loss in strength from peak strength levels is significant, but the strength remains exceptionally good. Transmission electron microscopy (TEM) of the as-melt spun samples revealed that Cr2Nb precipitates formed in the liquid Cu during the chill block melt spinning, indicating a very strong driving force for the formation of the precipitates. The TEM of the aged and consolidated materials indicates that the precipitates coarsen considerably, but remain in the submicron range.

Ellis, David L.↗
NASA NTRS1990

Apollo 15 KREEP-poor impact melts

Results are presented on the analysis of 18 fragments of the Apollo 15 KREEP-poor impact melt rock. This melt has gabbroic bulk composition, very low incompatible-element concentrations, and a slope in its heavy REE pattern that is distinct from that of KREEP. The melt has also the highest Ti content of LKFM impact melts from all highland sites. It is suggested that KREEP-poor impact melts may be basin-related melts which are mixtures of various Mg-suite noritic or gabbroic lower crustal rocks, and represent an early impact into the lower crust.

Lindstrom, M. M.↗
NASA NTRS1990

Melt migration in a silicate liquid-olivine system - An experimental test of compaction theory

An experimentally derived melt migration profile is compared with those obtained from compaction theory. A couple is prepared in which a source-for-melt (a disk composed of a silicate glass and olivine) was placed in contact with a sink-for-melt (a disk of polycrystalline olivine) in order to induce melt migration under laboratory conditions. It is noted that melt infiltrates into the sink disk along triple junctions driven by capillary forces. In order to analyze the melt migration profile in terms of compaction theory, the equations developed by McKenzie (1984) to describe porous flow of a liquid in a deformable matrix were modified. The bouyancy force term is replaced with a capillary force term and governing equations are then solved numerically with the initial boundary conditions specified by the experimental design. Also, it is determined that compaction theory provides a good description of the experimental results provided that the permeability of these solid-liquid materials increases linearly with increasing liquid fraction.

Riley, G. N., Jr.↗
NASA NTRS1991

Thermocapillary flow and natural convection in a melt column with an unknown melt/solid interface

A vertical melt column set up between an upper heating rod and a lower sample rod, i.e., the so-called half-zone system, is a convenient experimental tool for studying convection in the melt in floating-zone crystal growth. In order to help understand the convection observed in the melt column, a computer model has been developed to describe steady state, axisymmetrical thermocapillary flow and natural convection in the melt. The governing equations and boundary conditions are expressed in general non-orthogonal curvilinear coordinates in order to accurately treat the unknown melt/solid interface as well as all other physical boundaries in the system. The effects of key dimensionless variables on the following items are discussed: (1) convection and temperature distribution in the melt; (2) the shape of the melt/solid interface; (3) the height of the melt column. These dimensionless variables are the Grashof, Marangoni and Prandtl numbers.

Lan, C. W.↗