Results for “Materials Compatibility” — Page 8

DOE OSTI2023

Dual-Purpose Canister Filling Demonstration Project Progress Report at ORNL, 2023

The US DOE Office of Nuclear Energy is investigating the feasibility of direct disposal of dual-purpose canisters (DPCs) in a hypothetical geological repository to offset the potential requirement to repackage spent nuclear fuel (SNF) from existing DPCs into smaller, disposal-ready canisters. Oak Ridge National Laboratory (ORNL) is currently evaluating the feasibility of filling void space in loaded DPCs with an engineered material to prevent a criticality event caused by groundwater/moderator intrusion. Metal alloys are being investigated as a filler material because of their relatively low viscosities when molten, which may facilitate their injection via an existing drainpipe that runs almost the full length of the DPC. ORNL’s strategy for evaluating filler viability includes simulations and physical demonstrations of filling and casting behavior, as well as evaluations of materials for compatibility in the repository environment. Filling of DPCs in this manner is expected to mitigate the risk associated with a post-closure criticality event during the repository performance assessment time frame (10,000 years or greater). Efforts in this fiscal year focused on (1) destructive analysis of experimental filler castings made in FY 2022, (2) a report outlining a conceptual design of a DPC filling facility (Fortner et al., 2023, M3SF 23OR010305044/ ORNL/SPR-2023/2921, May 31, 2023), (3) a report on affected features, events, and processes (FEPs) due to DPC filling (Price et al., 2023, M3SF-23SN010305093, issuance pending), (4) developing and testing a more practical alloy filler based upon a Sn-Al eutectic, and (5) modeling the heating and cooling dynamics of a DPC subjected to molten metal filling. The preliminary results from each of these tasks support the feasibility of filling DPCs with metal as a strategy against the possibility of criticality in the repository. The FY 2022 casting was found to penetrate even very small orifices in the mold and internal structures. Preliminary testing of the Sn-Al eutectic indicate little interaction of the melt with Zircaloy cladding. Thermal modelling shows that a filled DPC will cool to manageable temperatures within 2-3 days, which is likely manageable in a facility.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2024

Microfabricated Ion Traps on Sapphire for Larger Trap Areas and Higher Qubit Count

Surface ion traps are a promising platform for quantum computing due to their potential to store large numbers of ions that can be addressed by electrical and optical control signals in order to implement quantum algorithms. Increasing the power of the quantum computer requires increasing the number of ions, but this poses a significant challenge in that it leads to a non-linear increase in on-chip power dissipation. The primary contributor to this power scaling in current devices is the capacitance between the radio frequency (RF) electrode and the metal plane that shields the silicon substrate from the RF signals applied to it. Silicon has traditionally been chosen for the substrate material for compatibility with the processing required for multi-metal-level traps. In this work, we address these capacitance and fabrication challenges by replacing the commonly used silicon substrate with an insulating sapphire substrate to fabricate a multi-metal-level ion trap, while still employing common semiconductor manufacturing techniques. This change in substrate allows the design to remove the metal shielding from the device design, reducing the capacitance of the RF electrode. The electrical characteristics of these traps were measured, specifically trap impedance, capacitance, and voltage breakdown, and compared to nearly identical silicon trap devices. Finally, we used laser cutting techniques to shape a sapphire wafer into bowtie shapes matching silicon traps previously fabricated at Sandia National Labs to explore solutions for integrating sapphire substrates into non-rectangular ion trap designs.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2021

Swell Behavior of Elastomers with a Hydrothermal Liquefaction Bio-Crude and a Fast Pyrolysis Bio-Oil

The compatibility of seventeen elastomer materials with two heavy biofuels (fast pyrolysis bio-oil and hydrothermal liquefaction (HTL) bio-crude) and diesel was assessed through volume change measurements. The elastomers included two fluorocarbons, six acrylonitrile rubbers (NBRs), and one each of fluorosilicone, neoprene, polyurethane, silicone, epichlorohydrin rubber (ECO), a blend of polyvinyl chloride and NBR (OZO), styrene butadiene rubber (SBR), hydrogenated NBR (HNBR) and ethylene propylene diene monomer (EPDM). The specimens were immersed in each test fuel for four weeks at 50°C and then measured for volume change. Afterwards, the specimens were dried, and the volume was remeasured. Ingeneral, the bio-oil produced unacceptable swelling in the fluoroelastomers, ECO, OZO, neoprene, polyurethane, SBR, HNBR, EPDM, silicone and five of the NBRs. In most cases, the HTL bio-crude produced lower (though still unacceptable) swelling than the bio-oil. Materials that showed good compatibility with the HTL biocrude were the fluoroelastomers, OZO, and silicone.

Kass, Michael↗

DOE OSTI2023

Characterization of Fe and Cr Dissolution and Reaction Product Formation in Molten Chloride Salts With and Without Impurities

There is considerable interest in molten chloride salts for several applications including thermal storage and next-generation molten salt reactors (MSRs). Several studies have concluded that Cl salts are highly corrosive to structural materials. Using Oak Ridge National Laboratory’s established methodology, Cl salt compatibility was assessed for candidate Ni-based alloys 230, 600 and 740 H at 600°–800°C in static welded capsules and in flowing thermal convection loop (TCL) salt experiments. Simply drying commercial Cl salt at 550°–650°C and adding~0.05 wt.%Mg was able to produce small specimen mass changes and limited surface attack after 100–1000 h exposures. Intentional additions of H 2 O, NiCl 2 and undried salt were used to better understand the role of impurities and achieve the>50 µm levels of attack reported in other studies. Further, characterisation of Cr depletion and oxide formation in conjunction with pre- and post-test salt chemistry measurements are being used to understand salt compatibility of structural materials.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Layers Can Be Deceiving: A Hopping Model for Small Molecule Diffusion in TATB Crystal

Sorption of small molecule gases in materials can play a significant role in their long‐term stability and compatibility within multi‐material assemblies. While many material properties of the insensitive high explosive TATB (1,3,5‐triamino‐2,4,6‐trinitrobenzene) are well understood, very little is known regarding its permeability to gases. TATB crystal exhibits a graphitic‐like layered packing structure that evokes a mental schema in which the layers form nanoscopic channels, but it is unclear whether this structure promotes gas transport. Here, we use molecular dynamics (MD) simulations to predict transport of small molecules through TATB single crystal. An approach to fit classical force fields is developed to model TATB interactions with H 2 O, He, Ne, and Ar, which is then combined with steered MD to probe gas transport along selected directions in the crystal. We find that small molecule transport occurs via a hopping mechanism that exhibits distinct jumps between interstitial sites and is substantially faster normal to the layers as compared to through them. This result stems from the finding that intralayer junctions between adjacent TATB molecules are the most stable interstitial sites and that energetic barriers are lower for hopping between adjacent layers. An empirical model for diffusion rate based on the MD data shows that the rate decays exponentially with increasing molecular radius and is negligibly small for all molecules larger than He, including common atmospheric gases. These findings have implications for the interpretation of experiments that measure surface area, material response to extreme conditions, and are expected to help constrain models for material aging.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Semiconductor-compatible topological digital alloys

Recently, GeSn alloys have attracted much interest for direct-gap infrared photonics and as potential topological materials which are compatible with the semiconductor industry. However, for photonics, the high-Sn content required leads to low detectivity, associated with poor material quality, and the (>35 %) Sn required for topological properties have been out of reach experimentally. Here, we demonstrate that by patterning the Sn distribution within Ge, the electronic properties have a far greater tunability than is possible with the random alloy. For the GeSn δ-digital alloy (DA) formed by confining Sn atoms in atomic layer(s) along the [111] direction of Ge, we show that ∼ 10 % Sn can lead to a triple-point semimetal. These findings are understood in terms of Sn ordering causing spatial separation of Sn and Ge band edges, leading to band inversion. This mechanism can also lead to a weak topological insulator, Weyl semimetal, and enables tunable direct bandgaps down to 2 meV, covering the entire infrared range. This DA induced topological properties are also identified in compound semiconductors, such as InAs 1-x Sb x , showing the general applicability of the DA design for realizing topological properties on conventional semiconductor platforms. Furthermore, our findings not only point to a new class of currently unexplored topological systems accessible by epitaxy, but also establish the promise of low-Sn GeSn DAs for application as infrared laser diodes and photodetectors in Si photonic integrated circuits and infrared image sensors.

3D topological semimetal↗

DOE OSTI2020

Click-chemistry compatible structures, click-chemistry functionalized structures, and materials and methods for making the same

According to various embodiments, systems, methods, and computer program products for click-chemistry compatible structures, additive manufacturing resins for forming the same, and method of formation of such structures and resins, as well as techniques for functionalizing click-chemistry compatible structures are disclosed. The inventive structures generally include a plurality of photo polymerized molecules structurally arranged according to a three-dimensional pattern, while surfaces of the structure are functionalized with one or more click-chemistry compatible molecules each having one or more click-chemistry compatible functional groups. The structures may be formed from single- or dual-component resins, each having unique synthetic pathways. The resulting structures may be functionalized for utility in a wide range of applications by leveraging click chemistry to further functionalize the structure with organic additives also compatible with click-chemistry reaction schemes.

36 MATERIALS SCIENCE↗

DOE OSTI2021

The Quest for Stable Potassium‐Ion Battery Chemistry

Abstract Potassium‐ion batteries (KIBs) have attracted wide interest for energy storage because of the abundance of the electrode materials involved; however, their electrochemical performances are far behind what can be achieved from lithium‐ion batteries (LIBs) or sodium‐ion batteries (SIBs). Herein, key promising electrode and electrolyte materials for potassium‐ion batteries are identified, the coupled electrochemical reactions in the cell are investigated, and the compatibility between different materials is demonstrated to play the most important role. K 2 Mn[Fe(CN) 6 ] cathode can deliver a high capacity of ≈125 mAh g −1 and exceptional cycling stability over 61 000 cycles (≈9 months) if the side reactions from the anode can be prevented. Graphite is a good anode material but is subjected to degradation in traditional carbonate electrolytes. New concentrated electrolytes are developed and evaluated. A stable KIB system is demonstrated by coupling a stable K 2 Mn[Fe(CN) 6 ] cathode, a prepotassiated graphite anode with a concentrated electrolyte to achieve a high energy density of ≈260 Wh kg −1 (based on the active mass of cathode and anode) and good cycling of over 1000 cycles.

Wu, Xianyong↗

DOE OSTI2023

Development of Metal-Free Photocatalysts

Solar fuels show great promise as clean, sustainable energy sources; however, established technologies are still plagued by high price, toxicity concerns, or low efficiencies. There is a critical need for inexpensive, benign materials that can effectively harness the sun’s energy. The overarching objective of this project is to evaluate the compatibility of novel material combinations for use as metal-free, heterojunction photocatalysts. Our central hypothesis is that by tuning the electronic structure of individual components in hybrid composites, via selective chemical modifications and physical stimuli to the interface, we can improve the photocatalytic properties of the overall assembly. We will determine factors that affect energy band gaps and band edge positions in isolated photocatalyst systems as well as explore routes to modulate heterojunction band alignments in composite assemblies. Our results will predict accessible pathways for charge carriers in new composite photocatalysts, facilitating access to more of the solar spectrum via inexpensive, environmentally-friendly material combinations.

14 SOLAR ENERGY↗

DOE OSTI2022

Effects of Coating on the Electrochemical Performance of a Nickel-Rich Cathode Active Material

Due to their safety and high power density, one of the most promising types of all-solid-state lithium batteries is the one made with the argyrodite solid electrolyte (ASE). Although substantial efforts have been made toward the commercialization of this battery, it is still challenged by some technical issues. One of these issues is to prevent the side reactions at the interface of the ASE and the cathode active material (CAM). A solution to address this issue is to coat the CAM particles with a material that is compatible with both ASE and CAM. Prior studies show that the lithium niobate, LiNbO 3 , (LNO) is a promising material for coating CAM particles to reduce the interfacial side reactions. However, no systematic study is available in the literature to show the effect of coating LNO on CAM performance. This paper aims to quantify the effect of LNO coating on the electrochemical performance of a nickel-rich CAM. The electrochemical performance parameters that are studied are the capacity, cycling performance, and rate performance of the coated-CAM; and the effectiveness of the coating to prevent the side reactions at the ASE and CAM interface is out of the scope of this study. To eliminate the effect of side reactions at the ASE and CAM interface, we conduct all tests in the organic liquid electrolyte (OLE) cells to solely present the effect of coating on the CAM performance. For this purpose, 0.5 wt.% and 1 wt.% LNO are used to coat the LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC-60) CAM through two synthesizing methods. Consequently, the effects of the synthesizing method and the coating weight percentage on the NMC-60 performance are presented.

10 SYNTHETIC FUELS↗

DOE OSTI2020

Performance of Vehicle Fuel System Elastomers and Plastics with Test Fuels Representing Gasoline Blended with 10% Ethanol (E10) and 16% Isobutanol (iBu16)

The compatibilities of fuel system elastomers and plastics were evaluated for test fuels containing 16 vol.% isobutanol (iBu16) and 10 vol.% ethanol (E10). Elastomers included two fluorocarbons, four acrylonitrile butadiene rubbers (NBRs), and one type of fluorosilicone, neoprene, and epichlorohydrin/ethylene oxide. Plastic materials included four nylon grades, three polyamides, polytetrafluoroethylene (PTFE), polyvinylidene fluoride (PVDF), ethylene tetrafluoroethylene (ETFE), polyphenylene sulfide (PPS), high-density polyethylene (HDPE), polybutylene terephthalate (PBT), polyoxymethylene (POM), flexible polyvinylchloride (PVC), polyetherimide (PEI), polyetheretherketone (PEEK), and a phenol formaldehyde reinforced with glass fiber (GFPF). For each polymer material, the volume, mass, and hardness were measured before and after drying. Dynamic mechanical analysis (DMA) measurements were also performed on the dried specimens.For the elastomer materials the measured properties were similar for both fuels. The fluorocarbons and fluorosilicone swelled the least (~20%), while more moderate (20-45%) expansion occurred for the two NBR hose grades and (ECO). HNBR, neoprene, and silicone exhibited high swelling and softening, which likely precludes their use in many fuel systems. For the plastic materials, the observed swell was low; Nylon 11 swelled around 15%, but otherwise, their measured swell was <10%. Many of the plastics also showed sensitivity to alcohol type, as the E10 test fuel often imparted appreciably higher swell than iBu16. In general, the plastic materials showed good compatibility with the iBu16 and E10 test fuels. Here, the sole exception was the PVC material, which was structurally degraded from exposure to either fuel type. Compositional analysis showed high fuel retention in Nylon 12 and PVC. PVC also experienced a significant reduction in plasticizer compounds following exposure, which resulted in embrittlement and an increase in the glass-to-rubber transition temperature.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2024

GeSn-on-GaAs with photoconductive carrier lifetime >400 ns: role of substrate orientation and atomistic simulation

Group IV GeSn quantum material finds application in electronics and silicon-compatible photonics. Synthesizing these materials with low defect density and high carrier lifetime is a potential challenge due to lattice mismatch induced defects and tin segregation at higher growth temperature. Recent advancements in the growth of these GeSn materials on Si, Ge, GaAs, and with substrate orientations, demonstrated different properties using epitaxial and chemical deposition methods. This article addresses the effect of GaAs substrate orientation and misorientation on the materials’ properties and carrier lifetimes in epitaxial Ge 0.94 Sn 0.06 layers. With starting GaAs substrates of (100)/2°, (100)/6°, (110) and (111)A orientations, Ge 0.94 Sn 0.06 epitaxial layers were grown with an intermediate Ge buffer layer by molecular beam epitaxy and analyzed by several analytical tools. X-ray analysis displayed good crystalline quality, and Raman spectroscopy measurements showed blue shifts in phonon wavenumber due to biaxial compressive strain in Ge 0.94 Sn 0.06 epilayers. Cross-sectional transmission electron microscopy analysis confirmed the defect-free heterointerface of Ge 0.94 Sn 0.06 /Ge/GaAs heterostructure. Minority carrier lifetimes of the unintentionally doped n-type Ge 0.94 Sn 0.06 epilayers displayed photoconductive carrier lifetimes of >400 ns on (100)/6°, 319 ns on (100)/2°, and 434 ns on (110) GaAs substrate at 1500 nm excitation wavelength. On the other hand, Ge 0.94 Sn 0.06 layer showed poor carrier lifetime on (111)A GaAs substrate. The observed differences in carrier lifetimes were correlated with the formation energy of the Ge on (100)/6° and (100)/2° GaAs heterointerface using Stillinger–Weber interatomic potential model-based atomistic simulation with different heterointerfacial bonding by Synopsys QuantumATK tool. Total energy computation of 6280-atom Ge/GaAs supercell on (100)/6° leads to lower formation energy than (100)/2°, making it more thermodynamically stable. Hence, the growth of the GeSn/III–V material system using misoriented (100) substrates that are more thermodynamically stable will enhance the performances of optoelectronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2022

Advanced Heterogeneous Integration Enabled by 3D Freestanding Membranes—From Material Growths to Applications

For the future of electronics such as bioelectronics, 3D integrated electronics, and bendable electronics, the need for flexibility and stackability of electronic products has substantially grown up. However, conventional wafer-based single-crystalline semiconductors cannot catch up with such trends because they are bound to thick rigid wafers such that they are neither flexible nor stackable. Although polymer-based organic electronic materials are more compatible as they are mechanically compliant and less costly than inorganic counterparts, their electronic/photonic performance is substantially inferior to that of single-crystalline inorganic materials. Such performance-mechanical compliance dilemma could be resolved by developing methods to obtain cheap, flexible, stackable, single-crystalline inorganic systems. Such dream electronic systems could be realized by producing single-crystalline freestanding membranes. For the past few decades, various layer transfer techniques (a.k.a layer liftoff techniques) have been developed to produce single-crystalline freestanding membranes. In today's talk, I will present the survey of the layer liftoff techniques and go over how these strategies unlock new ways of manufacturing advanced electronic systems. In addition, I will introduce unprecedented artificial heterostructure devices enabled by stacking of those freestanding 3D material membranes, e.g., the world's smallest vertically-stacked full-color micro-LEDs, the world's best multiferroic devices, chip-less wireless e-skin, and reconfigurable hetero-integrated chips with AI accelerators.

Kim, Jeehwan↗

DOE OSTI2022

Advanced Heterogeneous Integration Enabled by 3D Freestanding Membranes—From Material Growths to Applications

For the future of electronics such as bioelectronics, 3D integrated electronics, and bendable electronics, the need for flexibility and stackability of electronic products has substantially grown up. However, conventional wafer-based single-crystalline semiconductors cannot catch up with such trends because they are bound to thick rigid wafers such that they are neither flexible nor stackable. Although polymer-based organic electronic materials are more compatible as they are mechanically compliant and less costly than inorganic counterparts, their electronic/photonic performance is substantially inferior to that of single-crystalline inorganic materials. Such performance-mechanical compliance dilemma could be resolved by developing methods to obtain cheap, flexible, stackable, single-crystalline inorganic systems. Such dream electronic systems could be realized by producing single-crystalline freestanding membranes. For the past few decades, various layer transfer techniques (a.k.a layer liftoff techniques) have been developed to produce single-crystalline freestanding membranes. In today's talk, I will present the survey of the layer liftoff techniques and go over how these strategies unlock new ways of manufacturing advanced electronic systems. In addition, I will introduce unprecedented artificial heterostructure devices enabled by stacking of those freestanding 3D material membranes, e.g., the world's smallest vertically-stacked full-color micro-LEDs, the world's best multiferroic devices, chip-less wireless e-skin, and reconfigurable hetero-integrated chips with AI accelerators.

Kim, Jeehwan↗

DOE OSTI2022

2D material-based layer transfer: Challenges and opportunities

For future of electronics such as bioelectronics, 3D integrated electronics, and bendable electronics, needs for flexibility and stackability of electronic products have substantially grown up. However, conventional wafer-based single-crystalline semiconductors cannot catch up with such trends because they are bound to the thick rigid wafers such that they are neither flexible nor stackable. Although polymer-based organic electronic materials are more compatible as they are mechanically complaint and less costly than inorganic counterparts, their electronic/photonic performance is substantially inferior to that of single-crystalline inorganic materials. For the past few decades, many different strategies to mitigate such performance-mechanical compliance dilemma by developing methods to obtain cheap, flexible, stackable, single-crystalline inorganic systems. In today’s talk, I will discuss about various strategies to realize such a dream electronic system and how these strategies unlock new ways of manufacturing advanced electronic systems. One of the most promising approaches is to fabricate freestanding ultrathin membranes from existing functional material wafers by peeling the active layers from the top. I will overview all freestanding membrane methods and especially dive deeply into 2D materials-based layer transfer (2DLT) technique that has been recently emerging as one of the very promising options. In the 2DLT process, one can produce single-crystalline freestanding membranes from 3D materials by performing remote epitaxy or van der Waals epitaxy on 2D materials followed by peeling active single-crystalline films from the 2D materials. I will discuss about the challenges and opportunities of this technology. In addition, I will present unprecedented artificial heterostructures that can be enabled by stacking those freestanding 3D material membranes.

Kim, Jeehwan↗

DOE OSTI2022

Two-dimensional material based layer transfer: challenges and opportunities

For future of electronics such as bioelectronics, 3D integrated electronics, and bendable electronics, needs for flexibility and stackability of electronic products have substantially grown up. However, conventional wafer-based single-crystalline semiconductors cannot catch up with such trends because they are bound to the thick rigid wafers such that they are neither flexible nor stackable. Although polymer-based organic electronic materials are more compatible as they are mechanically complaint and less costly than inorganic counterparts, their electronic/photonic performance is substantially inferior to that of single-crystalline inorganic materials. For the past few decades, many different strategies to mitigate such performance-mechanical compliance dilemma by developing methods to obtain cheap, flexible, stackable, single-crystalline inorganic systems. In today’s talk, I will discuss about various strategies to realize such a dream electronic system and how these strategies unlock new ways of manufacturing advanced electronic systems. One of the most promising approaches is to fabricate freestanding ultrathin membranes from existing functional material wafers by peeling the active layers from the top. I will overview all freestanding membrane methods and especially dive deeply into 2D materials-based layer transfer (2DLT) technique that has been recently emerging as one of the very promising options. In the 2DLT process, one can produce single-crystalline freestanding membranes from 3D materials by performing remote epitaxy or van der Waals epitaxy on 2D materials followed by peeling active single-crystalline films from the 2D materials. I will discuss about the challenges and opportunities of this technology. In addition, I will present unprecedented artificial heterostructures that can be enabled by stacking those freestanding 3D material membranes.

KIM, JEEHWAN↗

DOE OSTI2020

Vehicle Technology Office (Quarterly Report, FY20 Q2)

This project has three objectives: (1) tuning microstructures of 3D-printed SSE separators, (2) determining material and processing compatibilities with cathode printing, and (3) 3D printing of sintering-free SSE separators.

36 MATERIALS SCIENCE↗

DOE OSTI2021

VTO battery project (Quarterly Report)

This project has three objectives: (1) tuning microstructures of 3D-printed SSE separators, (2) determining material and processing compatibilities with cathode printing, and (3) 3D printing of sintering-free SSE separators.

36 MATERIALS SCIENCE↗