Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Magnetization switching”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Electrical Interrogation of Thickness‐Dependent Multiferroic Phase Transitions in the 2D Antiferromagnetic Semiconductor NiI 2

Abstract 2D magnetic materials hold promise for quantum and spintronic applications. 2D antiferromagnetic materials are of particular interest due to their relative insensitivity to external magnetic fields and higher switching speeds compared to 2D ferromagnets. However, their lack of macroscopic magnetization impedes detection and control of antiferromagnetic order, thus motivating magneto‐electrical measurements for these purposes. Additionally, many 2D magnetic materials are ambient‐reactive and electrically insulating or highly resistive below their magnetic ordering temperatures, which imposes severe constraints on electronic device fabrication and characterization. Herein, these issues are overcome via a fabrication protocol that achieves electrically conductive devices from the ambient‐reactive 2D antiferromagnetic semiconductor NiI 2 . The resulting gate‐tunable transistors show band‐like electronic transport below the antiferromagnetic and multiferroic transition temperatures of NiI 2 , revealing a Hall mobility of 15 cm 2 V −1 s −1 at 1.7 K. These devices also allow direct electrical probing of the thickness‐dependent multiferroic phase transition temperature of NiI 2 from 59 K (bulk) to 28 K (monolayer).

2D magnets↗
DOE OSTI2022

Giant Doping Response of Magnetic Anisotropy in MnTe

Developing simple ways to control spin states in spintronic devices is a crucial step towards increasing their functionality. MnTe is a room-temperature antiferromagnet with promising spintronic properties, including for thermospintronics and magnon-based devices. Here, we show that, in MnTe, less than 1% Li is sufficient to produce a dramatic spin reorientation as observed by neutron diffraction. The behavior of the 0001 magnetic Bragg peak reveals a significant reorientation of the Mn spins from planar in the pure material to almost completely axial with minimal Li doping. Temperature dependence of the magnetic peaks in Li-doped samples indicates that axial spins shift back to planar suddenly upon approaching the Néel temperature (T N = 307 K). Density functional theory calculations support the idea that a shift in the Fermi level caused by doping is responsible for switching the material between two competing magnetic ground states. These results pave the way for developing easy switching of magnetic states in functional materials such as spintronic devices and topological insulators.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Voltage-controlled spin–orbit torque switching in W/CoFeB/MgO

Voltage control of magnetism and spintronics have been highly desirable but rarely realized. In this work, we show voltage-controlled spin–orbit torque (SOT) switching in W/CoFeB/MgO films with perpendicular magnetic anisotropy (PMA) with voltage administered through SrTiO 3 with a high dielectric constant. We show that a DC voltage can significantly lower PMA by 45%, reduce switching current by 23%, and increase the damping-like torque as revealed by the first- and second-harmonic measurements. These are characteristics that are prerequisites for voltage-controlled and voltage-select SOT switching spintronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Proximity Magnetism in Mn(Bi,Sb) 2 Te 4 –(Bi,Sb) 2 Te 3 /MnTe Natural Heterostructures

Magnetic topological insulators and their heterostructures provide significant opportunities to couple band topology with a nontrivial spin configuration for enhanced spintronic device performance, as well as designing magnetoelectric systems and functionalities. We find that Mn interdiffusion from MnTe when interfaced with (Bi,Sb) 2 Te 3 stabilizes as self-organized Mn(Bi,Sb) 2 Te 4 septuple lamellae among alternating (Bi,Sb) 2 Te 3 quintuple layers, as observed using scanning transmission electron microscopy and depth-sensitive polarized neutron reflectometry. We further demonstrate a valuable combination of magnetic and topological orders in these naturally formed Mn(Bi,Sb) 2 Te 4 –(Bi,Sb) 2 Te 3 heterostructures, which are exchange-coupled with MnTe. Magnetotransport experiments and quantum magnetism simulations reveal that, above its own Néel temperature T N ∼ 20 K, Mn(Bi,Sb) 2 Te 4 mediates the exchange field leading to an anomalous Hall effect at the (Bi,Sb) 2 Te 3 /MnTe interface, with an enhanced interfacial T N exceeding 200 K, approaching that of the bulk MnTe. This magnetic interface, in turn, allows a robust and deterministic spin–orbit torque switching without an external magnetic field at a low critical current density of 3 × 10 5 A cm –2 . The antiferromagnetically coupled architecture of Mn(Bi,Sb) 2 Te 4 –(Bi,Sb) 2 Te 3 /MnTe, featuring magnetic and topological proximity effects across a chalcogenide backbone, is rich in fundamental interface physics and holds the potential for practical applications in spintronics.

magnetic topological insulator↗
DOE OSTI2021

CHARGED POINT DEFECTS AND DEFECT COMPLEXES IN PHOSPHORENE AND STRUCTURAL PREDICTION OF TAU-11, A DENSITY FUNCTIONAL THEORY APPROACH

With the advent of powerful computers, first principle calculations have become a robust and reliable tool to complement experiments in the study of materials. First principle calculations such as density functional theory can be used to guide experiments to save time and effort when it comes to new and advanced materials discovery. Study of charge defects in materials and crystal structure prediction are such areas in which density functional theory calculations facilitate the prediction of defect formation energy, charge transition levels and elemental site occupations. Experimentally, studying charge defects requires inferring results from various techniques. Likewise, determining site occupancies for similar elements using experimental techniques is challenging and sometimes impossible. In this work, we study the charged intrinsic and extrinsic defects and defect complexes in phosphorene and determine the site occupancies of Al, Fe and Si in the τ11 phase using density functional theory. In the defect work, we calculate the defect formation energy, charge transition level, binding energies and Stokes shift for vacancy, dopant substitution and dopant-vacancy defect complexes in phosphorene. We found that vacancy defect in phosphorene becomes negatively charged in n-type doping and may passivate the dopants and reduce carrier concentration and mobility. For non-metal dopants in phosphorene, we predict that O, S and Si prefer to form dopant-vacancy complexes removing the vacancy defect states from the band gap. Mn dopant-vacancy defect complex exhibits possibility of switching between two magnetic spin states. Lastly, using density functional theory, we complement the results from neutron powder diffraction to determine the site occupancies of Al and Si in τ11 phase which was used to determine the alloying element to develop a high temperature and low density alloy.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Bottom‐Up Synthesis of Metallic CoNi Nanoplatelets with Magnetic Vortex‐Like Spin Configurations

Magnetic nanoplatelets hold significant potential for various technical applications due to their ability to switch between a fully magnetized state with high magnetization and a vortex‐like configuration that eliminates stray fields in the absence of an external field. This study presents the synthesis of uniform CoNi nanoplatelets through the topotactic reduction of metal hydroxides using hydrogen plasma. The reduction process is analyzed via magnetometry, leveraging the transition from paramagnetic hydroxide to ferromagnetic metal. Lorentz transmission electron microscopy and scanning transmission X‐ray microscopy confirm the presence of magnetic vortex‐like structures in isolated Co 0.85 Ni 0.15 nanoplatelets at ambient temperature. Additionally, micromagnetic simulations are conducted to further explore the magnetic properties of the nanoplatelets, revealing the formation of magnetic vortex remanent states at diameters between 200 nm and 1 μm and a thickness of around 12 nm. Notably, structural defects and thickness variations do not directly destabilize the magnetic vortex configurations.

Kräenbring, Mena‐Alexander [Faculty of Physics and↗
DOE OSTI2020

Cost Effective 6.5% Silicon Steel Laminate for Electric Machines

Iowa State University teamed with United Technologies Research Center and the University of Delaware and demonstrated a high switching frequency non-rare earth permanent magnet motor. A prototype motor with 400 Hz switching frequency, dummy MnBi permanent magnet with 8 MGOe energy density, and 6.5%Si steel as the laminate materials was designed, built, and tested. The performance of the prototype met the expectations showing a higher frequency motor enabled by 6.5%Si steel is a viable approach to meet DOE 2022 cost and performance targets for electric vehicle drive. Adoption of 6.5%Si steel will result in 3% improvement in energy conversion efficiency of the soft magnetic materials. In addition, the ability to use non-rare earth magnet for high power density application effectively mitigate the risk of EV traction motor from the rising rare earth price.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Electrical Switching and Imaging of Antiferromagnetic Spins in Perovskite Epitaxial Thin Films

Electrical control of antiferromagnets is essential for the field of antiferromagnetic spintronics that promises ultrafast speed and terahertz dynamics. However, the large family of complex oxide antiferromagnets such as perovskites have been largely unexplored. Here, we demonstrate electrical switching and detection of Néel vector in LaFeO 3 epitaxial thin films with an epitaxy-enabled biaxial anisotropy, of which the switching behavior is understood by comparing to magnetic field controlled spin Hall magnetoresistance measurements. The electrical switching is corroborated by imaging of antiferromagnetic domains using X-ray Magnetic Linear Dichroism Photoemission Electron Microscopy. Electrical switching of 3-nm and 10-nm LaFeO 3 films was achieved over a wide temperature range of 25 to 300 K. This work offers an attractive platform for exploration of antiferromagnetic spintronics and other emerging phenomena such as potential insulating altermagnetism.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Role of element-specific damping in ultrafast, helicity-independent, all-optical switching dynamics in amorphous (Gd,Tb)Co thin films

Ultrafast control of the magnetization in ps timescales by fs laser pulses offers an attractive avenue for applications such as fast magnetic devices for logic and memory. However, ultrafast helicity-independent all-optical switching (HI-AOS) of the magnetization has thus far only been observed in Gd-based, ferrimagnetic amorphous (a-) rare earth-transition metal (a-RE-TM) systems, and a comprehensive understanding of the reversal mechanism remains elusive. Here, we report HI-AOS in ferrimagnetic a-Gd 22-x Tb x Co 78 thin films, from x=0 to 18, and elucidate the role of Gd in HI-AOS in a-RE-TM alloys and multilayers. Increasing Tb content results in increasing perpendicular magnetic anisotropy and coercivity, without modifying magnetization density, and slower remagnetization rates and higher critical fluences for switching but still shows picosecond HI-AOS. Simulations of the atomistic spin dynamics based on the two-temperature model reproduce these results qualitatively and predict that the lower damping on the RE sublattice arising from the small spin-orbit coupling of Gd (with L=0) is instrumental for the faster dynamics and lower critical fluences of the Gd-rich alloys. Annealing a-Gd 10 Tb 12 Co 78 leads to slower dynamics which we argue is due to an increase in damping. These simulations strongly indicate that accounting for element-specific damping is crucial in understanding HI-AOS phenomena. The results suggest that engineering the element-specific damping of materials can open up new classes of materials that exhibit low-energy, ultrafast HI-AOS.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

First-principles insight into all-optical spin switching in the half-metallic Heusler ferrimagnet Mn 2 RuGa

All-optical spin switching (AOS) represents a new frontier in magnetic storage technology—spin manipulation without a magnetic field—but its underlying working principle is not well understood. Many AOS ferrimagnets such as GdFeCo are amorphous and renders the high-level first-principles study unfeasible. The crystalline half-metallic Heusler Mn 2 RuGa presents an opportunity. Here we carry out hitherto the comprehensive density functional investigation into the material properties of Mn 2 RuGa, and introduce two concepts—the spin anchor site and the optical active site—as two pillars for AOS in ferrimagnets. In Mn 2 RuGa, Mn(4a) serves as the spin anchor site, whose band is below the Fermi level and has a strong spin moment, while Mn(4c) is the optical active site whose band crosses the Fermi level. Our magneto-optical Kerr spectrum and band structure calculation jointly reveal that the delicate competition between the Ru-4d and Ga-4p states is responsible for the creation of these two sites. Furthermore these two sites found here not only present a unified picture for both Mn 2 RuGa and GdFeCo, but also open the door for future applications. Specifically, we propose a Mn 2 Ru x Ga-based magnetic tunnel junction where a single laser pulse can control magnetoresistance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

A Unified Wireless Charger, On-Board Charger, and Auxiliary Power Module for Electric Vehicle Charging Systems

This paper proposes a unified electric vehicle (EV) charging architecture that integrates wireless power transfer (WPT), an on-board charger (OBC), and an auxiliary power module (APM) within a single architecture. By sharing a multi-functional magnetic structure and active switch bridges, the proposed topology eliminates additional transformers and converter stages, reducing hardware complexity and improving power density. A multipurpose magnetic design achieves magnetic decoupling among the WPT, OBC, and APM functions while maintaining the required coupling for each mode. Through electrical reconfiguration, the WPT operates as an LCC-S converter, whereas the OBC and APM operate as dual-active-bridge (DAB) converters. The system supports multiple operating modes, including simultaneous high-voltage and lowvoltage battery charging. Finite-element and circuit simulations verify the magnetic characteristics and system operation, demonstrating the feasibility of the proposed unified architecture for EV charging applications.

Jo, Cheolhui [ORNL] (ORCID:0000000322692434)↗
DOE OSTI2026

Terahertz‐Nanoscale Visualization of the Microscopic Spin‐Charge Architecture of Colossal Magnetoresistive Switching

Resolving sub-10 nm spin switching and the associated terahertz (THz) electrodynamics during the colossal magnetoresistance (CMR) transition is a definitive frontier in reaching the fundamental spatial, temporal, and energy-dissipation limits of spin-electronics. Yet, simultaneous control of high magnetic field, cryogenic environment, and nanometer resolution has remained an elusive benchmark for THz nanoscopy, leaving the local THz dynamics of these transitions largely unexplored. Here, we overcome these limitations by utilizing a custom-built cryogenic magneto-THz scattering-type scanning near-field optical microscopy (cm-THz-sSNOM) to resolve the near-field THz spectroscopic evolution of the magnetic field-driven CMR transition in a manganite single crystal. Our measurements provide a nanoscale visualization of the THz conductivity, capturing the moment that magnetic-field-induced spin switching triggers the transition from an antiferromagnetic insulator to a ferromagnetic metal. An ellipsoidal near-field model reveals a multi-scale transition initiated by 1–2 nm isolated spin-flip sites at low magnetic fields, which coalesce into ∼15 nm conducting regions as the threshold field is approached. These results provide an nano-THz view of CMR switching, establishing an analysis framework for mapping spin–charge–lattice–orbit–coupled dynamics at spatial scales that transcend the nominal sSNOM resolution.

Haeuser, Samuel [Iowa State University, Ames, IA (↗
DOE OSTI2023

Local spectroscopy of a gate-switchable moiré quantum anomalous Hall insulator

Abstract In recent years, correlated insulating states, unconventional superconductivity, and topologically non-trivial phases have all been observed in several moiré heterostructures. However, understanding of the physical mechanisms behind these phenomena is hampered by the lack of local electronic structure data. Here, we use scanning tunnelling microscopy and spectroscopy to demonstrate how the interplay between correlation, topology, and local atomic structure determines the behaviour of electron-doped twisted monolayer–bilayer graphene. Through gate- and magnetic field-dependent measurements, we observe local spectroscopic signatures indicating a quantum anomalous Hall insulating state with a total Chern number of ±2 at a doping level of three electrons per moiré unit cell. We show that the sign of the Chern number and associated magnetism can be electrostatically switched only over a limited range of twist angle and sample hetero-strain values. This results from a competition between the orbital magnetization of filled bulk bands and chiral edge states, which is sensitive to strain-induced distortions in the moiré superlattice.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Optical control of integer and fractional Chern insulators

Optical control of topology, particularly in the presence of electron correlations, is an interesting topic with broad scientific and technological impact. Twisted MoTe 2 bilayer (tMoTe 2 ) is a zero-field fractional Chern insulator (FCI), exhibiting the fractionally quantized anomalous Hall effect. As the chirality of the edge states and sign of the Chern number are determined by the underlying ferromagnetic polarization, manipulation of ferromagnetism would realize control of the Chern insulator (CI)/FCI states. Here, in this work, we demonstrate control of ferromagnetic polarization, and thus the CI and FCI states, by circularly polarized optical pumping in tMoTe 2 . At low excitation power, we achieve on-demand preparation of ferromagnetic polarization by optical training, that is, electrically tuning the system from non-ferromagnetic to desirable ferromagnetic states under helicity-selective optical pumping. With increased excitation power, we further realize direct optical switching of ferromagnetic polarization at a temperature far below the Curie temperature. Both optical training and direct switching are most effective near CI and FCI states, which we attribute to a gap-enhanced valley polarization of optically pumped holes. The magnetization can be dynamically switched by modulating the helicity of optical excitation. Spatially resolved measurements further demonstrate optical writing of ferromagnetic, and thus CI (or FCI) domains. Our work realizes precise optical control of a topological quantum many-body system with potential applications in topological spintronics, quantum memories and creation of exotic edge states by programmable patterning of integer and fractionally quantized anomalous Hall domains.

ferromagnetism↗
DOE OSTI2021

Yu-Shiba-Rusinov states and ordering of magnetic impurities near the boundary of a superconducting nanowire

We theoretically study the spectrum induced by one and two magnetic impurities near the boundary of a one-dimensional nanowire in proximity to a conventional s-wave superconductor and extract the ground-state magnetic configuration. We show that the energies of the subgap states, supported by the magnetic impurities, are strongly affected by the boundary for distances less than the superconducting coherence length. In particular, when the impurity is moved towards the boundary, multiple quantum phase transitions periodically occur in which the parity of the superconducting condensate oscillates between even and odd. We find that the magnetic ground-state configuration of two magnetic impurities depends not only on the distance between them, but also explicitly on their distance away from the boundary of the nanowire. As a consequence, the magnetic ground state can switch from ferromagnetic to antiferromagnetic while keeping the interimpurity distance unaltered by simultaneously moving both impurities away from the boundary. The ground-state magnetic configuration of two impurities is found analytically in the weak coupling regime and exactly for an arbitrary impurity coupling strength using numerical tight-binding simulations.

1-dimensional systems↗
DOE OSTI2021

Proton switching molecular magnetoelectricity

Abstract The convergence of proton conduction and multiferroics is generating a compelling opportunity to achieve strong magnetoelectric coupling and magneto-ionics, offering a versatile platform to realize molecular magnetoelectrics. Here we describe machine learning coupled with additive manufacturing to accelerate the design strategy for hydrogen-bonded multiferroic macromolecules accompanied by strong proton dependence of magnetic properties. The proton switching magnetoelectricity occurs in three-dimensional molecular heterogeneous solids. It consists of a molecular magnet network as proton reservoir to modulate ferroelectric polarization, while molecular ferroelectrics charging proton transfer to reversibly manipulate magnetism. The magnetoelectric coupling induces a reversible 29% magnetization control at ferroelectric phase transition with a broad thermal hysteresis width of 160 K (192 K to 352 K), while a room-temperature reversible magnetic modulation is realized at a low electric field stimulus of 1 kV cm −1 . The findings of electrostatic proton transfer provide a pathway of proton mediated magnetization control in hierarchical molecular multiferroics.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Deterministic Current–Induced Perpendicular Switching in Epitaxial Co/Pt Layers without an External Field

Current–induced spin–orbit torques (SOTs) have emerged as a powerful tool to control magnetic elements and non–uniform magnetic textures such as domain walls and skyrmions. SOT–induced switching of perpendicular magnetization generally requires an external field to break the rotational symmetry of the spin–orbit effective fields responsible for the deterministic reversal. The proposed mechanisms to eliminate this requirement often rely on complex multilayer structures that necessitate laborious optimization in the material and spin transport properties, making them less attractive for applications. Herein, current–induced, external field–free switching of an epitaxial MgO/Pt/Co trilayer with an extremely large perpendicular anisotropy in excess of 3 Tesla is reported. It is found that switching occurs due to the interplay of strong SOTs, local anisotropy fluctuations, and the Dzyaloshinkii–Moriya interaction inherent to this epitaxial system. Finally, given that these layers constitute the base stack of a magnetic tunnel junction, this switching mechanism offers the most technologically viable path toward devices such as field–free SOT–based magnetic random–access memories.

36 MATERIALS SCIENCE↗