Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Magic angle spinning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Combined effect of NaAlO2 and NaOH on the early age hydration of Portland cement with a high concentration of borate solution

The early age hydration of ordinary Portland cement in 5 M borate solution, with or without the addition of NaAlO{sub 2} and/or NaOH, was investigated. Hydration was measured using calorimetry, X-ray diffraction, thermogravimetric analysis, {sup 11}B and {sup 27}Al magic angle spinning NMR analysis, and scanning transmission electron microscopy. The purpose of this study was to reveal the mechanisms behind the retardation caused by a high concentration borate solution and the restoration of hydration through the combined addition of NaOH and NaAlO{sub 2}. Amorphous ulexite, which formed on the surface of the cement particles and prevented the further dissolution of anhydrous phases, was identified as the retardation product. The mechanism of the combined addition of NaAlO{sub 2} and NaOH in overcoming retardation was to transform amorphous ulexite into B-AFt and gowerite (CaB{sub 6}O{sub 10}·5H{sub 2}O). Formation of gowerite is favorable because of the much higher boron immobilization capacity in weight percentage, comparing to usual boron-containing phases reported previously.

36 MATERIALS SCIENCE↗

In-pore exchange and diffusion of carbonate solvent mixtures in nanoporous carbon

High resolution magic angle spinning (HRMAS) 1 H NMR spectroscopy has been used to resolve different surface and in-pore solvent environments of ethylene carbonate (EC) and dimethyl carbonate (DMC) mixtures absorbed within nanoporous carbon (NPC). Two dimensional (2D) 1 H HRMAS NMR exchange measurements revealed that the inhomogeneous broadened in-pore resonances have pore-to-pore exchange rates on the millisecond timescale. Pulsed-field gradient (PFG) NMR diffusometry revealed the in-pore self-diffusion constants for both EC and DMC were reduced by up to a factor of five with respect to the diffusion in the non-absorbed solvent mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Clay hydration/dehydration in dry to water-saturated supercritical CO2: Implications for caprock integrity

Injection of supercritical CO2 (scCO2) for the geologic storage of carbon dioxide will displace formation water, and the pore space adjacent to overlying caprocks could eventually be dominated by dry to water-saturated scCO2. Wet scCO2 is highly reactive and capable of carbonating and hydrating certain minerals, whereas anhydrous scCO2 can dehydrate water-containing minerals. Because these geochemical processes affect solid volume and thus porosity and permeability, they have the potential to affect the long-term integrity of the caprock seal. In this study, we investigate the swelling and shrinkage of an expandable clay found in caprock formations, montmorillonite (Ca-STx-1), when exposed to variable water-content scCO2 at 50 °C and 90 bar using a combination of in situ probes, including X-ray diffraction (XRD), in situ magic angle spinning nuclear magnetic resonance spectroscopy (MAS NMR), and in situ attenuated total reflection infrared spectroscopy (ATR-IR). We show that the extent of montmorillonite clay swelling/shrinkage is dependent not only on water hydration/dehydration, but also on CO2 intercalation reactions. Our results also suggest a competition between water and CO2 for interlayer residency where increasing concentrations of intercalated water lead to decreasing concentrations of intercalated CO2. Overall, this paper demonstrates the types of measurements required to develop fundamental knowledge that will enhance modeling efforts and reduce risks associated with subsurface storage of CO2.

Environmental Molecular Sciences Laboratory↗

Thermal decomposition pathways of bulk electrolytes on vanadium oxide nanocrystals

The thermal stability of electrolytes at an elevated temperature induced by battery charge-discharge cycling is critical for the long cycling performance of a rechargeable battery. For many multivalent systems, such as rechargeable magnesium batteries, which offer great potential for high energy density and utilize earth-abundant resources, electrolyte instability and electrode surface passivation, arising from electrolyte decomposition, remain as major roadblocks. Understanding the electrolyte decomposition pathways at the electrode-electrolyte interface is essential to provide guidance in overcoming this challenge. In this work, in situ 13 C magic angle spinning nuclear magnetic resonance (MAS NMR) and first-principles calculations were used to investigate the thermal decomposition of the electrolyte in a system consisting of MgV 2 O 4 , a novel cathode for magnesium batteries, mixed with a bulk electrolyte consisting of magnesium bis(trifluoromethanesulfonyl)imide (Mg(TFSI) 2 ) in diglyme (G2). We show that significant electrolyte decomposition is observed in bulk 1.0 M Mg(TFSI) 2 in G2 mixed with nanometer sized MgV 2 O 4 powder at elevated temperatures. This observation is to mimic the possible thermal decomposition that might happen during battery cycling. We demonstrate that the MgV 2 O 4 surface is covered by a layer of decomposed G2 products. We conclude that the dominant reaction pathway for electrolyte decomposition is the thermal decomposition of the pure electrolytes at elevated temperatures, followed by adsorption of G2 decomposition products to the MgV 2 O 4 surface. The activation energy for the major decomposition pathway is obtained. In conclusion, this work highlights the importance of studying thermal decomposition of electrolytes for overall system stability and explores electrolyte stability at significantly elevated temperatures.

25 ENERGY STORAGE↗

Solvation and Acid Strength Effects on Catalysis by Faujasite Zeolites

Kinetic, spectroscopic, and chemical titration data indicate that differences in monomolecular isobutane cracking and dehydrogenation and methanol dehydration turnover rates (per H+) among FAU zeolites treated thermally with steam (H-USY) and then chemically with ammonium hexafluorosilicate (CDHUSY) predominantly reflect differences in the size and solvating properties of their supercage voids rather than differences in acid strength. The number of protons on a given sample was measured consistently by titrations with Na+, with CH3 groups via reactions of dimethyl ether, and with 2,6-di-tert-butylpyridine during methanol dehydration catalysis; these titration values were also supported by commensurate changes in acidic OH infrared band areas upon exposure to titrant molecules. The number of protons, taken as the average of the three titration methods, was significantly smaller than the number of framework Al atoms (Alf) obtained from X-ray diffraction and 27Al magic angle spinning nuclear magnetic resonance spectroscopy on H-USY (0.35 H+/Alf) and CD-HUSY (0.69 H+/Alf). These data demonstrate that the ubiquitous use of Alf sites as structural proxies for active H+ sites in zeolites can be imprecise, apparently because distorted Al structures that are not associated with acidic protons are sometimes detected as Alf sites. Monomolecular isobutane cracking and dehydrogenation rate constants, normalized non-rigorously by the number of Alf species, decreased with increasing Na+ content on both H-USY and CD-HUSY samples and became undetectable at sub-stoichiometric exchange levels (0.32 and 0.72 Na+/Alf ratios, respectively), an unexpected finding attributed incorrectly in previous studies to the presence of minority ‘‘super-acidic’’ sites. These rate constants, when normalized rigorously by the number of residual H+ sites were independent of Na+ content on both H-USY and CD-HUSY samples, reflecting the stoichiometric replacement of protons that are uniform in reactivity by Na+ cations. Monomolecular isobutane cracking and dehydrogenation rate constants (per H+; 763 K), however, were higher on H-USY than CD-HUSY (by a factor of 1.4). Equilibrium constants for the formation of protonated methanol dimers via adsorption of gaseous methanol onto adsorbed methanol monomers, determined from kinetic studies of methanol dehydration to dimethyl ether (433 K), were also higher on H-USY than CD-HUSY (by a factor of 2.1). These larger constants predominantly reflect stronger dispersive interactions in H-USY, consistent with its smaller supercage voids that result from the occlusion of void space by extraframework Al (Alex) residues. These findings appear to clarify enduring controversies about the mechanistic interpretation of the effects of Na+ and Alex species on the catalytic reactivity of FAU zeolites. They also illustrate the need to normalize rates by the number of active sites instead of more convenient but less accurate structural proxies for such sites.

Environmental Molecular Sciences Laboratory↗

Structural and thermal characterization of CaO-MgO-SiO2-P2O5-CaF2 glasses

The paper presents the influence of varying CaO/MgO ratio on the structure and thermal properties of CaO-MgO-SiO2-P2O5-CaF2 glasses. A series of eight glass compositions in the glass forming region of diopside (CaMgSi2O6) - fluorapatite [Ca5(PO4)3F] - wollastonite (CaSiO3) ternary system have been designed and synthesized by varying diopside/wollastonite ratio in glasses. The as prepared melt-quenched glasses have been characterized for their structure by infrared spectroscopy (FTIR) and magic angle spinning (MAS)-nuclear magnetic resonance (NMR) spectroscopy. Silicon is predominantly present as Q2 (Si) species, while phosphorus tends to coordinate in orthophosphate environment in all the investigated glasses. The change in CaO/MgO ratio had an insignificant affect on the structure of glasses. The thermal sintering and crystallization parameters for the studied glasses have been obtained from differential thermal analysis (DTA) while crystalline phase fractions in the sintered glass-ceramics have been analyzed by X-ray diffraction adjoined with Rietveld refinement. Diopside, fluorapatite, wollastonite and pseudowollastonite have crystallized as the main crystalline phases in all the glass-ceramics with their content varying with respect to variation in CaO/MgO ratio in glasses. Scanning electron microscopy (SEM) has been used to shed light on the microstructure of glass-ceramics. The possible implications of structure and sintering behaviour of glasses on their bioactivity have been discussed.

36 MATERIALS SCIENCE↗

Bulk magnetization and 1H NMR spectra of magnetically heterogeneous model systems

Bulk magnetization and ¹H static and magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectra of two magnetically heterogeneous model systems based on laponite (LAP) layered silicate or polystyrene (PS) with low and high proton concentration, respectively, and ferrimagnetic Fe₂O₃ nano- or micro-particles have been studied. In LAP+Fe₂O₃, a major contribution to the NMR signal broadening is due to the dipolar coupling between the magnetic moments of protons and magnetic particles. In PS+Fe₂O₃, due to the higher proton concentration in polystyrene and stronger proton–proton dipolar coupling, an additional broadening is observed, i.e. ¹H MAS NMR spectra of magnetically heterogeneous systems are sensitive to both proton–magnetic particles and proton–proton dipolar couplings. An increase of the volume magnetization by ~1 emu/cm³ affects the ¹H NMR signal width in a way that is similar to an increase of the proton concentration by ~2×10²²/cm³. ¹H MAS NMR spectra, along with bulk magnetization measurements, allow the accurate determination of the hydrogen concentration in magnetically heterogeneous systems.

Bulk magnetization↗

Directly and indirectly detected through-bond heteronuclear correlation solid-state NMR spectroscopy under fast MAS

Two-dimensional through-bond {sup 1}H({sup 13}C) solid-state NMR experiments utilizing fast magic angle spinning (MAS) and homonuclear multipulse {sup 1}H decoupling are presented. Remarkable efficiency of polarization transfer can be achieved at MAS rates exceeding 40 kHz, which is instrumental in these measurements. Schemes utilizing direct and indirect detection of heteronuclei are compared in terms of resolution and sensitivity. A simple procedure for optimization of {sup 1}H homonuclear decoupling sequences under these conditions is proposed. The capabilities of these techniques were confirmed on two naturally abundant solids, tripeptide N-formyl-l-methionyl-l-leucyl-l-phenylalanine (f-MLF-OH) and brown coal.

36 MATERIALS SCIENCE↗

Double echo symmetry-based REDOR and RESPDOR pulse sequences for proton detected measurements of heteronuclear dipolar coupling constants

1 H{X} symmetry-based rotational echo double resonance pulse sequences (S-REDOR) and symmetry-based rotational echo saturation pulse double resonance (S-RESPDOR) solid-state NMR experiments have found widespread application for 1 H detected measurements of difference NMR spectra, dipolar coupling constants, and internuclear distances under conditions of fast magic angle spinning (MAS). In these experiments the supercycled $\text{R4}^2_1 (\text{SR4}^2_1)$ symmetry-based recoupling pulse sequence is typically applied to the 1 H spins to reintroduce heteronuclear dipolar couplings. However, the timing of $\text{SR4}^2_1$ and other symmetry-based pulse sequences must be precisely synchronized with the rotation of the sample, otherwise, the evolution of 1 H CSA and other interactions will not be properly refocused. For this reason, significant distortions are often observed in experimental dipolar dephasing difference curves obtained with S-REDOR or S-RESPDOR pulse sequences. Here we introduce a family of double echo (DE) S-REDOR/S-RESPDOR pulse sequences that function in an analogous manner to the recently introduced $t_1$-noise eliminated (TONE) family of dipolar heteronuclear multiple quantum coherence (D-HMQC) pulse sequences. Through numerical simulations and experiments the DE S-REDOR/S-RESPDOR sequences are shown to provide dephasing difference curves similar to those obtained with S-REDOR/S-RESPDOR. However, the DE sequences are more robust to the deviations of the MAS frequency from the ideal value that occurs during typical solid-state NMR experiments. In this work, the DE sequences are shown to provide more reliable 1 H detected dipolar dephasing difference curves for nuclei such as 15 N (with isotopic labelling), 183 W and 35 Cl. The double echo sequences are therefore recommended to be used in place of conventional S-REDOR/S-RESPDOR sequences for measurement of weak dipolar coupling constants and long-range distances.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Current limitations of solid-state NMR in carbohydrate and cell wall research

High-resolution investigation of cell wall materials has emerged as an important application of biomolecular solid-state NMR (ssNMR). Multidimensional correlation experiments have become a standard method for obtaining sufficient spectral resolution to determine the polymorphic structure of carbohydrates and address biochemical questions regarding the supramolecular organization of cell walls. Here, using plant cellulose and matrix polysaccharides as examples, we will review how the multifaceted complexity of polysaccharide structure is impeding the resonance assignment process and assess the available biochemical and spectroscopic approaches that could circumvent this barrier. We will emphasize the ineffectiveness of the current methods in reconciling the ever-growing dataset and deriving structural information. We will evaluate the protocols for achieving efficient and homogeneous hyperpolarization across the cell wall material using magic-angle spinning dynamic nuclear polarization (MAS-DNP). Critical questions regarding the line-broadening effects of cell wall molecules at cryogenic temperature and by paramagnetic biradicals will be considered. Finally, the MAS-DNP method will be placed into a broader context with other structural characterization techniques, such as cryo-electron microscopy, to advance ssNMR research in carbohydrate and cell wall biomaterials.

09 BIOMASS FUELS↗

Determination of the relative orientation between 15 N- 1 H dipolar coupling and 1 H chemical shift anisotropy tensors under fast MAS solid-state NMR

Here, in this work, we have proposed a proton-detected three-dimensional (3D) 15 N- 1 H dipolar coupling (DIP)/ 1 H chemical shift anisotropy (CSA)/ 1 H chemical shift (CS) correlation experiment to measure the relative orientation between the 15 N- 1 H dipolar coupling and the 1 H CSA tensors under fast magic angle spinning (MAS) solid-state NMR. In the 3D correlation experiment, the 15 N- 1 H dipolar coupling and 1 H CSA tensors are recoupled using our recently developed windowless C-symmetry-based $C3^{1}_{3}$-ROCSA (recoupling of chemical shift anisotropy) DIPSHIFT and $C3^{1}_{3}$-ROCSA pulse-based methods, respectively. The 2D 15 N- 1 H DIP/ 1 H CSA powder lineshapes extracted using the proposed 3D correlation method are shown to be sensitive to the sign and asymmetry of the 1 H CSA tensor, a feature that allows the determination of the relative orientation between the two correlating tensors with improved accuracy. The experimental method developed in this study is demonstrated on a powdered U- 15 N L-Histidine.HCl·H 2 O sample.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deuteron off-resonance rotating frame relaxation for the characterization of slow motions in rotating and static solid-state proteins

Here, we demonstrate the feasibility of deuterium solid-state NMR off-resonance rotating frame relaxation measurements for studies of slow motions in biomolecular solids. The pulse sequence, which includes adiabatic pulses for magnetization alignment, is illustrated for static and magic-angle spinning conditions away from rotary resonances. We apply the measurements for three systems with selective deuterium labels at methyl groups: a) a model compound, Fluorenylmethyloxycarbonyl methionine-D 3 amino acid, for which the principles of the measurements and corresponding motional modeling based on rotameric interconversions are demonstrated; b) amyloid-β 1-40 fibrils labeled at a single alanine methyl group located in the disordered N-terminal domain. This system has been extensively studied in prior work and here serves as a test of the method for complex biological systems. The essential features of the dynamics consist of large-scale rearrangements of the disordered N-terminal domain and the conformational exchange between the free and bound forms of the domain, the latter one due to transient interactions with the structured core of the fibrils. and c) a 15-residue helical peptide which belongs to the predicted α-helical domain near the N-terminus of apolipoprotein B. The peptide is solvated with triolein and incorporates a selectively labeled leucine methyl groups. The method permits model refinement, indicating rotameric interconversions with a distribution of rate constants.

59 BASIC BIOLOGICAL SCIENCES↗

Phosphate glass matrix composites incorporating trisilanol phenyl polyhedral oligomeric silsesquioxane prepared by viscous flow sintering method with enhanced benefits

The effect of mixing and sintering processes to prepare tin fluorophosphate glass (Pglass) matrix composites incorporating trisilanol phenyl polyhedral oligomeric silsesquioxane (TSP-POSS) was investigated by comparing manual and suspension mixing, one-step and stepwise sintering processes to explore the structure dynamics and physical properties in the composites as a function of the different process conditions used. Energy Dispersive X-ray analysis confirmed optimal homogeneous dispersion of the TSP-POSS molecules in the composites prepared by the suspension method. The observed increase of glass transition temperature and the reduction of non-bridging bonds in the composites are believed to be the reason for the effective dispersion of TSP-POSS molecules in the composites. The chemical reaction between the TSP-POSS and Pglass was strongly influenced by the mixing/dispersion and sintering processes investigated. 13 C cross polarized magic angle spinning (CP MAS) solid state nuclear magnetic resonance (NMR) spectroscopy confirmed the chemical stability of the TSP-POSS during the sintering process at elevated temperatures. In addition, a chemical reaction between the TSP-POSS and Pglass was evidenced by 29 Si CP MAS NMR analysis. Here, this study will provide a better fundamental understanding of the effective dispersion mechanism of the TSP-POSS molecules in the Pglass matrix that will facilitate tailoring the physicochemical properties of the composites with addition of various small concentrations of TSP-POSS for a number of applications where the pure Pglass is not applicable due to the intrinsic properties of the Pglass.

36 MATERIALS SCIENCE↗

Glass formation and structure of melt quenched mixed oxy-sulfide Na 4 P 2 S 7-x O x glasses for 0 ≤ x ≤ 5

The structures of Na 4 P 2 S 7-x O x , 0 ≤ x ≤ 5, glasses were investigated using melt quench (MQ) samples. The short-range order (SRO) structures of these glasses were examined using a combination of Raman, Fourier Transform Infrared (FT-IR), and 31 P Magic Angle Spinning NMR ( 31 P MAS NMR) spectroscopies to determine how oxygen is incorporated into the sulfide structure. Using vibrational spectroscopy, semi-quantitative 31 P MAS NMR, and charge balancing, a complete compositional map of all the SRO structures present in these glasses has been generated. From these findings, full incorporation of the oxygen into the sulfide melt was found to occur across the compositional series through a structural disproportionation reaction where oxygen systematically replaces bridging sulfurs (BSs), before replacing the remaining non-bridging sulfurs (NBSs). Under the melting and quenching conditions used in this study, it was found that the melts crystallize too quickly to form homogeneous crystallite-free glasses for x > 5.

36 MATERIALS SCIENCE↗

The S solubility of Cr and Al containing simulated low-activity waste glass

Here, the presence of sulfur-containing molten salt phases during vitrification is a particular problem which can be detrimental to the melter. Borosilicate compositions were designed to explore both the effects of a fixed amount of Cr, as Cr 2 O 3 or Na 2 CrO 4 , and the impact of Al 2 O 3 , on sulfur solubility as determined by progressively adding elemental S. The NABS series (with Al 2 O 3 ) has a higher SO 3 solubility of ~3.5 mol% while the NBS series (without Al 2 O 3 ) has a SO 3 solubility of ~2 mol%. Crystalline Cr 2 O 3 formed in the NABS series upon the addition of S but is not present in the NBS series. At the highest S addition, a separate salt phase always forms, and was identified as Na 2 (S,Cr)O 4 via electron dispersive spectroscopy, ultraviolet-visible spectroscopy, x-ray diffraction, and thermal analysis. Magic angle spinning nuclear magnetic resonance identified no change in the B coordination in either series as S is added, suggesting that the Na is scavenged from other locations, such as the Si sites, to charge compensate sulfate, whether in the glass or in the salt. The Cr precursor identity did not affect the observed overall behavior regarding sulfur, but did impact Cr redox as identified with Raman spectroscopy.

36 MATERIALS SCIENCE↗