Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

The influence of microstructure on magnetic properties of nanocrystalline Fe-Pt-Nb-B permanent magnet ribbons

A FePt-based hard-magnetic nanocomposite of exchange spring type was prepared by isothermal annealing of melt-spun Fe{sub 52}Pt{sub 28}Nb{sub 2}B{sub 18} (atomic percent) ribbons. The relationship between microstructure and magnetic properties was investigated by qualitative and quantitative structural analysis based on the x-ray diffraction, transmission electron microscopy, and {sup 57}Fe Moessbauer spectrometry on one hand and the superconducting quantum interference device magnetometry on the other hand. The microstructure consists of L1{sub 0}-FePt hard-magnetic grains (15-45 nm in diameter) dispersed in a soft magnetic medium composed by A1 FePt, Fe{sub 2}B, and boron-rich (FeB)PtNb remainder phase. The ribbons annealed at 700 deg. C for 1 h exhibit promising hard-magnetic properties at room temperature: M{sub r}/M{sub s}=0.69; H{sub c}=820 kA/m and (BH){sub max}=70 kJ/m{sup 3}. Strong exchange coupling between hard and soft magnetic phases was demonstrated by a smooth demagnetizing curve and positive {delta}M-peak in the Henkel plot. The magnetic properties measured from 5 to 750 K reveals that the hard characteristics remains rather stable up to 550 K, indicating a good prospect for the use of these permanent magnets in a wide temperature range.

36 MATERIALS SCIENCE↗

La{sub 0.7}Sr{sub 0.3}MnO{sub 3} nanopowders: Synthesis of different powders structures and real magnetic properties of nanomanganites

The difference in the magnetic properties between two lanthanum manganite nanopowders with identical phase and chemical composition is discussed in terms of the influence of nanopowder synthesis conditions on their properties. The aim of this investigation was to show the influence of precursor type and structure on the structure and properties of final La{sub 0.7}Sr{sub 0.3}MnO{sub 3} nanopowders obtained by precipitation technique. The forming of a complex structure of precursor materials during drying and inheritance at firing stage led to the formation of bimodal particle size distribution and magnetic properties typical of coarse powders. The correct choice of precursor material and the technological conditions of the drying and firing stage were allowed for the creation of a uniform powder structure with special magnetic properties. We showed that the magnetic properties of nanopowders were not always determined by chemical or phase composition and mean particle size of synthesized powders. The difference in precipitation process can lead to unpredictable and catastrophic results, and masked the effect of nanoparticles on the magnetic properties of the material. - Highlights: • Precursor’s structure has a strong influence on LSM nanoparticles structure. • Amorphous precursor structure led to uniform LSM nanoparticles formation. • Crystal precursors led to the formation of bimodal LSM particles distribution. • Decrease the single-domain LSM NP size led to decrease the powder’s magnetization.

36 MATERIALS SCIENCE↗

Tuning the optical and magnetic properties of lanthanide single-ion magnets using nitro-functionalized trispyrazolylborate ligands

We report the synthesis, crystal structures, photophysical and magnetic properties of 11 novel lanthanide complexes with the asymmetrically functionalized trispyrazolylborate ligand 4-nitrotrispyrazolylborate, 4-NO 2 Tp–: [Ln(4-NO 2 Tp) 3 ] (Ln = La–Dy, except Pm). In-depth photophysical characterization of the ligands via luminescence, reflectance and absorption spectroscopic techniques, decay lifetimes, quantum yields supported by time-dependent density functional theory (TD-DFT) and natural bond order (NBO) analysis reveal that n-NO 2 Tp– ligands are dominated by intra-ligand charge transfer (ILCT) transitions and that second-sphere interactions are critical to the stabilization of the T 1 state of n-NO 2 Tp– ligands and hence their ability to sensitize Ln 3+ emission. The luminescence properties of the complexes indicate that 4-NO 2 Tp– is a poor sensitizer of Ln 3+ emission, unlike 3-NO 2 Tp–. Moreover, [Nd(4-NO 2 Tp) 3 ] (crystallized as a hexane solvate) displays single-molecule magnet (SMM) properties, with longer relaxation times and larger barrier than the non-functionalized [NdTp 3 ], attributed to the addition of the NO 2 -group and subsequent rigidification of the molecular structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SmZn{sub 11}-type derivative compound in the Yb-Zn-Al system: Crystal structure and magnetic properties

Crystal structure and magnetic properties are reported for Yb{sub 3.50}Zn{sub 32.1}Al{sub 1.4} prepared in single-crystalline form. It adopts the SmZn{sub 11}-type of structure (SG P6/mmm) with lattice parameters a=0.90458(1), c=0.88547(1) nm. The phase composition was analyzed by XRD, chemical and electron microprobe analysis. The ytterbium atoms in this compound are in the non-magnetic 4f{sup 14} state. - Graphical abstract: Crystal structure and magnetic susceptibility of Yb{sub 3.50}Zn{sub 32.1}AI{sub 1.4}. Highlights: > Yb{sub 3.50}Zn{sub 32.1}Al{sub 1.4} single crystals were synthesized by flux-growth method. > The studied material is diamagnetic. > Magnetization measurements revealed divalent state of Yb atoms in this structure. > Data from EDAX, chemical and X-ray analysis show good correlation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Co–In{sub 2}O{sub 3} Nanocomposite Films: Synthesis and Structural and Magnetic Properties

The structural and magnetic properties of granular Co–In{sub 2}O{sub 3} nanocomposite films formed by vacuum annealing of In/Co{sub 3}O{sub 4} film bilayers at a temperature of 550°C have been investigated. The synthesized Co–In{sub 2}O{sub 3} films contain ferromagnetic cobalt nanoclusters with an average size of 60 nm and a magnetization of ~340 emu/cm{sup 3} surrounded by the In{sub 2}O{sub 3} layer and exhibit the thermally activated conductivity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Magnetic properties and microstructure of bulk Nd-Fe-B magnets solidified in magnetic field

The Nd-Fe-B bulk magnets with a slab shape of 0.9 x 4 x 15 mm{sup 3} were prepared by injection casting into a copper mold. The effects of applying a magnetic field during the casting process on the magnetic properties and microstructure of Nd{sub 9.5}Fe{sub 71.5}Ti{sub 2.5}Zr{sub 0.5}Cr{sub 1}B{sub 14.5}C{sub 0.5} alloy have been studied. The results show that the sample cast with magnetic field has a stronger (00L) texture of Nd{sub 2}Fe{sub 14}B phase with the c-axis perpendicular to the slab plane than the sample cast without magnetic field. The intensity of the texture weakens from surface to inner region of the bulk magnets. Applying a magnetic field during the casting process is helpful to refine the grain size effectively. As a result, the magnetic properties are improved from B{sub r} = 5.8 kG, {sub i}H{sub c} = 6.5 kOe, and (BH){sub max} = 5.9 MGOe for thesample cast without magnetic field to B{sub r} = 6.1 kG, {sub i}H{sub c} = 10.3 kOe, and (BH){sub max} = 7.3 MGOe for the sample cast with a 3.7 kOe magnetic field.

36 MATERIALS SCIENCE↗

Magnetic properties of the layered III-VI diluted magnetic semiconductor Ga{sub 1−x}Fe{sub x}Te

Magnetic properties of single crystalline Ga{sub 1−x}Fe{sub x}Te (x = 0.05) have been measured. GaTe and related layered III-VI semiconductors exhibit a rich collection of important properties for THz generation and detection. The magnetization versus field for an x = 0.05 sample deviates from the linear response seen previously in Ga{sub 1−x}Mn{sub x}Se and Ga{sub 1−x}Mn{sub x}S and reaches a maximum of 0.68 emu/g at 2 K in 7 T. The magnetization of Ga{sub 1−x}Fe{sub x}Te saturates rapidly even at room temperature where the magnetization reaches 50% of saturation in a field of only 0.2 T. In 0.1 T at temperatures between 50 and 400 K, the magnetization drops to a roughly constant 0.22 emu/g. In 0 T, the magnetization drops to zero with no hysteresis present. The data is consistent with Van-Vleck paramagnetism combined with a pronounced crystalline anisotropy, which is similar to that observed for Ga{sub 1−x}Fe{sub x}Se. Neither the broad thermal hysteresis observed from 100-300 K in In{sub 1−x}Mn{sub x}Se nor the spin-glass behavior observed around 10.9 K in Ga{sub 1−x}Mn{sub x}S are observed in Ga{sub 1−x}Fe{sub x}Te. Single crystal x-ray diffraction data yield a rhombohedral space group bearing hexagonal axes, namely R3c. The unit cell dimensions were a = 5.01 Å, b = 5.01 Å, and c = 17.02 Å, with α = 90°, β = 90°, and γ = 120° giving a unit cell volume of 369 Å{sup 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab Initio Study of the Electronic Structure, Elastic Properties, Magnetic Feature and Thermodynamic Properties of the Ba{sub 2}NiMoO{sub 6} Material

We report first-principles calculations of the elastic properties, electronic structure and magnetic behavior performed over the Ba{sub 2}NiMoO{sub 6} double perovskite. Calculations are carried out through the full-potential linear augmented plane-wave method within the framework of the Density Functional Theory (DFT) with exchange and correlation effects in the Generalized Gradient and Local Density Approximations, including spin polarization. The elastic properties calculated are bulk modulus (B), the elastic constants (C{sub 11}, C{sub 12} and C{sub 44}), the Zener anisotropy factor (A), the isotropic shear modulus (G), the Young modulus (Y) and the Poisson ratio (υ). Structural parameters, total energies and cohesive properties of the perovskite are studied by means of minimization of internal parameters with the Murnaghan equation, where the structural parameters are in good agreement with experimental data. Furthermore, we have explored different antiferromagnetic configurations in order to describe the magnetic ground state of this compound. The pressure and temperature dependence of specific heat, thermal expansion coefficient, Debye temperature and Grüneisen parameter were calculated by DFT from the state equation using the quasi-harmonic model of Debye. A specific heat behavior C{sub V} ≈ C{sub P} was found at temperatures below T = 400 K, with Dulong–Petit limit values, which is higher than those, reported for simple perovskites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal structure and magnetic properties of the Ba{sub 3}TeCo{sub 3}P{sub 2}O{sub 14}, Pb{sub 3}TeCo{sub 3}P{sub 2}O{sub 14}, and Pb{sub 3}TeCo{sub 3}V{sub 2}O{sub 14} langasites

We report the structural and magnetic characterizations of Ba{sub 3}TeCo{sub 3}P{sub 2}O{sub 14}, Pb{sub 3}TeCo{sub 3}P{sub 2}O{sub 14}, and Pb{sub 3}TeCo{sub 3}V{sub 2}O{sub 14}, compounds that are based on the mineral dugganite, which is isostructural to langasites. The magnetic part of the structure consists of layers of Co{sup 2+} triangles. Nuclear and magnetic structures were determined through a co-refinement of synchrotron and neutron powder diffraction data. In contrast to the undistorted P321 langasite structure of Ba{sub 3}TeCo{sub 3}P{sub 2}O{sub 14}, a complex structural distortion yielding a large supercell is found for both Pb{sub 3}TeCo{sub 3}P{sub 2}O{sub 14} and Pb{sub 3}TeCo{sub 3}V{sub 2}O{sub 14}. Comparison of the three compounds studied along with the zinc analog Pb{sub 3}TeZn{sub 3}P{sub 2}O{sub 14}, also characterized here, suggests that the distortion is driven by Pb{sup 2+} lone pairs; as such, the Pb compounds crystallize in a pyroelectric space group, P2. Magnetic susceptibility, magnetization, and heat capacity measurements were performed to characterize the magnetic behavior. All three compounds become antiferromagnetic with Néel temperatures T{sub N}≈21 K (Ba{sub 3}TeCo{sub 3}P{sub 2}O{sub 14}), ≈13 K (Pb{sub 3}TeCo{sub 3}P{sub 2}O{sub 14}), and ≈8 K (Pb{sub 3}TeCo{sub 3}V{sub 2}O{sub 14}), and they exhibit magnetic transitions at high applied magnetic fields, suggesting intrinsically complex magnetic behavior for tetrahedrally coordinated d{sup 7} Co{sup 2+} in this structure type. - Graphical abstract: Ba{sub 3}TeCo{sub 3}P{sub 2}O{sub 14}, Pb{sub 3}TeCo{sub 3}P{sub 2}O{sub 14} and Pb{sub 3}TeCo{sub 3}V{sub 2}O{sub 14} exhibit a triangles-of-triangles arrangement of the magnetic cations. Despite the Pb-induced crystallographic distortion, all of these materials exhibit competing antiferromagnetic and ferromagnetic interactions that lead to complex high field magnetism. - Highlights: • Nuclear and magnetic structures of Ba{sub 3}TeCo{sub 3}P{sub 2}O{sub 14}, Pb{sub 3}TeCo{sub 3}P{sub 2}O{sub 14} and Pb{sub 3}TeCo{sub 3}V{sub 2}O{sub 14}. • Structural characterization shows complex Pb-induced distortion. • Distortion puts Pb-compounds into space group that allows potential multiferroicity. • Magnetic characterization shows competing magnetic interactions. • Triangles of triangles motif results in complex high-field magnetic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic properties of Fe-Mn-Pt for heat assisted magnetic recording applications

We calculate the electronic structures of FePt and Fe{sub 0.5}Mn{sub 0.5}Pt using first-principles calculations based on density functional theory within the local-spin-density approximation. The Curie temperature (T{sub c}) was calculated by mean field approximation. Composition dependence of the Cure temperature (T{sub c}(x)) of Fe{sub 1−x}Mn{sub x}Pt was used to identify a composition to meet the desired T{sub c} in the range of 600–650 K. The identified composition (0.0294 ≤ x ≤ 0.0713) gives saturation magnetization (M{sub s}) in the range of 1041–919 emu/cm{sup 3} and magnetocrystalline anisotropy constant (K) in the range of 9.96–8.36 × 10{sup 6 }J/m{sup 3} at 0 K. Temperature dependent M(T) and K(T) of Fe{sub 1−x}Mn{sub x}Pt (0.0294 ≤ x ≤ 0.0713) were calculated using the Brillouin function and Callen-Callen experimental relation, respectively. Fe{sub 1−x}Mn{sub x}Pt (0.0294 ≤ x ≤ 0.0713) shows 930–800 emu/cm{sup 3} of M{sub s} and 7.18–5.61 × 10{sup 6 }J/m{sup 3} of K at 300 K, thereby satisfying desired magnetic properties for heat-assisted magnetic recording media to achieve 4 Tb/in.{sup 2} areal density.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Annealing Effects on Microstructure and Magnetic Properties of (NdPr){sub 9.5}(FeNbCoCu){sub 79.5}(BC){sub 11} Nanocomposite Magnets

Annealing effects on microstructure and magnetic properties of (NdPr){sub 9.5}(FeNbCo){sub 79.5}(BC){sub 11} ribbons were investigated. It was observed that Nd{sub 2}Fe{sub 14}B and Fe{sub 3}B phases were directly formed at low spinning speed. Then, the alloys transformed to an amorphous state at a speed of 20 m/s. Annealed at 700 {sup ∘}C for 10 min, the amorphous alloys as-quenched at 20 m/s crystallized into a nanocomposite composed of Nd{sub 2}Fe{sub 14}B and α-Fe phases. The formation of Fe{sub 3}B phases was inhibited. The magnetic properties firstly increased and then decreased with the increasing of annealing time. The optimum magnetic properties were achieved in the alloys annealed at 700 {sup ∘}C for 10 min. The corresponding coercivity, remanence, and the maximum energy product was 427.5 kA/m, 0.94 T, and 101.2 kJ/m{sup 3}, respectively. In addition, fine and uniform grains were formed. The average grain size was 10 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

{sup 1}H relaxation enhancement induced by nanoparticles in solutions: Influence of magnetic properties and diffusion

Magnetic nanoparticles that induce nuclear relaxation are the most promising materials to enhance the sensitivity in Magnetic Resonance Imaging. In order to provide a comprehensive understanding of the magnetic field dependence of the relaxation enhancement in solutions, Nuclear Magnetic Resonance {sup 1}H spin-lattice relaxation for decalin and toluene solutions of various Fe{sub 2}O{sub 3} nanoparticles was investigated. The relaxation experiments were performed in a frequency range of 10 kHz–20 MHz by applying Field Cycling method, and in the temperature range of 257–298 K, using nanoparticles differing in size and shape: spherical – 5 nm diameter, cubic – 6.5 nm diameter, and cubic – 9 nm diameter. The relaxation dispersion data were interpreted in terms of a theory of nuclear relaxation induced by magnetic crystals in solution. The approach was tested with respect to its applicability depending on the magnetic characteristics of the nanocrystals and the time-scale of translational diffusion of the solvent. The role of Curie relaxation and the contributions to the overall {sup 1}H spin-lattice relaxation associated with the electronic spin-lattice and spin-spin relaxation was thoroughly discussed. It was demonstrated that the approach leads to consistent results providing information on the magnetic (electronic) properties of the nanocrystals, i.e., effective electron spin and relaxation times. In addition, features of the {sup 1}H spin-lattice relaxation resulting from the electronic properties of the crystals and the solvent diffusion were explained.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic properties and transformation of crystal structure in the ErFe{sub 2}-ErAl{sub 2} system

The modification of structural properties and magnetic behaviour of the ErFe{sub 2−x}Al{sub x} Laves phase intermetallic compounds have been studied while changing the Al content in the range 0.36 ≤ x ≤ 1.5. Powder X-ray diffraction study at room temperature showed the formation of the cubic C15 structure, in the samples with Al content of 0.36 ≤ x < 0.75 and 1.4 ≤ x ≤ 2.0. For the intermediate compositions with 0.75 ≤ x ≤ 1.4, the hexagonal C14 structure is observed. Magnetic and magnetocaloric properties of polycrystalline ErFe{sub 2−x}Al{sub x} intermetallic compounds were investigated experimentally using magnetic and heat capacity measurements. The Curie temperature T{sub C} decreases from 275 to 28 K as the Al content increases from x = 0.36 to x = 1.5, respectively. Magnetization measurements in strong magnetic fields showed the complex mechanism of magnetic saturation in the studied compounds. Under an external field change from 0 to 2 T, the maximum entropy change is 6 J/kg K at T = 28 K for the composition with x = 1.5. The minimum in the concentration dependence of the magnetic entropy change is observed in the vicinity of x equal to 1.25. Regularities of variations of magnetocaloric properties of ErFe{sub 2−x}Al{sub x} intermetallic compounds with increasing Al content are discussed from the point of view of their both structural and magnetic states.

36 MATERIALS SCIENCE↗

Structural Electronic and Magnetic Properties of Quasi-1D Quantum Magnets [Ni(HF2)(pyz)2]X (pyz = pyrazine; X = PF6- SbF6-) Exhibiting Ni-FHF-Ni and Ni-pyz-Ni Spin Interactions

[Ni(HF{sub 2})(pyz){sub 2}]X {l_brace}pyz = pyrazine; X = PF{sub 6}{sup -} (1), SbF{sub 6}{sup -} (2){r_brace} were structurally characterized by synchrotron X-ray powder diffraction and found to possess axially compressed NiN{sub 4}F{sub 2} octahedra. At 298 K, 1 is monoclinic (C2/c) with unit cell parameters, a = 9.9481(3), b = 9.9421(3), c = 12.5953(4) {angstrom}, and {beta} = 81.610(3){sup o} while 2 is tetragonal (P4/nmm) with a = b = 9.9359(3) and c = 6.4471(2) {angstrom} and is isomorphic with the Cu-analogue. Infinite one-dimensional (1D) Ni-FHF-Ni chains propagate along the c-axis which are linked via {mu}-pyz bridges in the ab-plane to afford three-dimensional polymeric frameworks with PF{sub 6}{sup -} and SbF{sub 6}{sup -} counterions occupying the interior sites. A major difference between 1 and 2 is that the Ni-F-H bonds are bent (157{sup o}) in 1 but are linear in 2. Ligand field calculations (LFT) based on an angular overlap model (AOM), with comparison to the electronic absorption spectra, indicate greater {pi}-donation of the HF{sub 2}{sup -} ligand in 1 owing to the bent Ni-F-H bonds. Magnetic susceptibility data for 1 and 2 exhibit broad maxima at 7.4 and 15 K, respectively, and {lambda}-like peaks in dxT/dT at 6.2 and 12.2 K that are ascribed to transitions to long-range antiferromagnetic order (TN). Muon-spin relaxation and specific heat studies confirm these TN's. A comparative analysis of x vs T to various 1D Heisenberg/Ising models suggests moderate antiferromagnetic interactions, with the primary interaction strength determined to be 3.05/3.42 K (1) and 5.65/6.37 K (2). However, high critical fields of 19 and 37.4 T obtained from low temperature pulsed-field magnetization data indicate that a single exchange constant (J1D) alone is insufficient to explain the data and that residual terms in the spin Hamiltonian, which could include interchain magnetic couplings (J), as mediated by Ni-pyz-Ni, and single-ion anisotropy (D), must be considered. While it is difficult to draw absolute conclusions regarding the magnitude (and sign) of J and D based solely on powder data, further support offered by related Ni(II)-pyz compounds and our LFT and density-functional theory (DFT) results lead us to a consistent quasi-1D magnetic description for 1 and 2.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic properties of Co-Zr-B magnets produced by spark plasma sintering method

Magnets of Co-Zr-B, one of the permanent magnetic compounds without rare-earth elements, were successfully produced by the spark plasma sintering method. The resultant Co-Zr-B magnets had high densities of 92%–96% and consisted mainly of the Co{sub x}Zr (x ≈ 5) phase. The coercivity of the Co-Zr-B magnets was highly dependent on the consolidation temperature and the boron content. The highest maximum energy product of 6.0 MGOe, with a remanence of 6.4 kG and the coercivity of 4.0 kOe, was achieved by the Co{sub 80}Zr{sub 18}B{sub 2} magnets consolidated at 873 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗