Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC FILM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Interlayer engineering of Fe 3 GeTe 2 : From 3D superlattice to 2D monolayer

The discoveries of ferromagnetism down to the atomically thin limit in van der Waals (vdW) crystals by mechanical exfoliation have enriched the family of magnetic thin films [C. Gong et al., Nature 546 , 265–269 (2017) and B. Huang et al., Nature 546 , 270–273 (2017)]. However, compared to the study of traditional magnetic thin films by physical deposition methods, the toolbox of the vdW crystals based on mechanical exfoliation and transfer suffers from low yield and ambient corrosion problem and now is facing new challenges to study magnetism. For example, the formation of magnetic superlattice is difficult in vdW crystals, which limits the study of the interlayer interaction in vdW crystals [M. Gibertini, M. Koperski, A. F. Morpurgo, K. S. Novoselov, Nat. Nanotechnol. 14 , 408–419 (2019)]. Here, we report a strategy of interlayer engineering of the magnetic vdW crystal Fe 3 GeTe 2 (FGT) by intercalating quaternary ammonium cations into the vdW spacing. Both three-dimensional (3D) vdW superlattice and two-dimensional (2D) vdW monolayer can be formed by using this method based on the amount of intercalant. On the one hand, the FGT superlattice shows a strong 3D critical behavior with a decreased coercivity and increased domain wall size, attributed to the co-engineering of the anisotropy, exchange interaction, and electron doping by intercalation. On the other hand, the 2D vdW few layers obtained by over-intercalation are capped with organic molecules from the bulk crystal, which not only enhances the ferromagnetic transition temperature ( T C ), but also substantially protects the thin samples from degradation, thus allowing the preparation of large-scale FGT ink in ambient environment.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Permanently Magnetized Insulating Thin-Film Devices by Reduction

A reduction-based manufacturing process for creating technologically important multilayer structures from lattice-matched ferromagnetic insulators and ferromagnetic conductors is reported. The process is demonstrated by growing a permanently magnetized double-layer structure, consisting of lattice-matched conducting (Ni,Co) and insulating (Ni 0.4 Co 0.6 ) 3 O 3 layers, through a single deposition cycle. The orientation of the metal cation network is preserved after reduction. Close-packing displacements of Ni and Co take place in such a manner that the in-plane hexagonal arrangement is preserved. This is critical for ensuring high-quality interfaces joining the layers. At room temperature the hysteresis loop is centered. At low temperature the oxide layer becomes ferrimagnetically ordered, accompanied by a shift of the hysteresis loop along the magnetic field axis. The shift is assigned to exchange bias phenomenon. Biaxial compressive strain is responsible for the required ferrimagnetic ordering. Finally, spin valves and closely related magnetoresistance random access memory and spin-transfer-torque magnetic random access memory devices are addressed as potential applications.

42 ENGINEERING↗
DOE OSTI2023

Nonlinear multi-magnon scattering in artificial spin ice

Abstract Magnons, the quantum-mechanical fundamental excitations of magnetic solids, are bosons whose number does not need to be conserved in scattering processes. Microwave-induced parametric magnon processes, often called Suhl instabilities, have been believed to occur in magnetic thin films only, where quasi-continuous magnon bands exist. Here, we reveal the existence of such nonlinear magnon-magnon scattering processes and their coherence in ensembles of magnetic nanostructures known as artificial spin ice. We find that these systems exhibit effective scattering processes akin to those observed in continuous magnetic thin films. We utilize a combined microwave and microfocused Brillouin light scattering measurement approach to investigate the evolution of their modes. Scattering events occur between resonance frequencies that are determined by each nanomagnet’s mode volume and profile. Comparison with numerical simulations reveals that frequency doubling is enabled by exciting a subset of nanomagnets that, in turn, act as nanosized antennas, an effect that is akin to scattering in continuous films. Moreover, our results suggest that tunable directional scattering is possible in these structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1972

Wall contraction in Bloch wall films.

The phenomenon of wall contraction characterized by a peak in the velocity-field relationship and a region of negative differential mobility is observed in uniaxial magnetic thin films of various magnetic properties by careful interrupted-pulse experiments. The observed results agree quite well with the theory for bulk samples when the extensive flux closure of thin film walls is accounted for by a suitable empirical scaling factor.

Bartran, D. S.↗
DOE OSTI2025

Stabilization of magnetic bubbles in [Ni/Co]n multilayers on an oxygen-reconstructed Nb(110) surface via an ultra-thin Cu interlayer

Magnetic thin films hosting topological spin textures, such as magnetic skyrmions, hold high potential for breakthroughs in the field of spintronics, due to good scalability and energy efficiency. Novel computational architectures such as memory-in-logic devices rely on material platforms able to host those topological spin textures. Furthermore, recently proposed designs of novel quantum information technologies are based on heterostructures where topological spin textures are in direct proximity to a superconducting layer. Here, we demonstrate the stabilization of out-of-plane magnetic bubbles in highly ordered [Ni/Co]n multilayers on a Nb(110) single crystal. This is achieved without the need for the removal of the well-known Nb(110)-oxide surface reconstruction, due to the introduction of an ultra-thin Cu interlayer in between the Nb substrate and the magnetic multilayer. The Cu interlayer generates a well-ordered hexagonal surface, which is key for the epitaxial growth of the [Ni/Co]n multilayers hosting the desired out-of-plane anisotropy. The magnetic ground state of the prepared material stacks is directly imaged via spin-polarized low-energy electron microscopy, revealing the presence of magnetic bubble domains with lateral sizes as small as 450 nm.

Dibajeh, Ahmad↗
DOE OSTI2021

Synthesis and characterization of amorphous Fe2.75Dy-oxide thin films demonstrating room-temperature semiconductor, magnetism, and optical transparency

Recently, amorphous/disordered oxide thin films made from Fe and lanthanides like Dy and Tb have been reported to have a rich set of magnetic, optical, and electronic properties, as well as room-temperature magneto-electric coupling with multiferroics [A. Malasi et al., Sci. Rep. 5, 18157 (2015); H. Taz et al., Sci. Rep. 6, 27869 (2016); and H. Taz et al., Sci. Rep. 10, 1–10 (2020)]. Here, we report the synthesis and detailed characterization of Fe2.75Dy-oxide thin films prepared on various substrates using electron beam co-evaporation. The structure, chemistry, electric, magnetic, and optical properties were studied for the as-prepared and annealed (373 K, in air, 1 h) films of thickness 40 nm. High resolution transmission electron microscopy and electron diffraction study showed that the films were amorphous in both the as-prepared and annealed states. The electron energy-loss spectroscopy studies quantified that metal oxygen stoichiometry changed from Fe2.75Dy-O1.5 to Fe2.75Dy-O1.7 upon annealing. Synchrotron-based x-ray absorption spectroscopy investigation confirmed that the as-prepared films were highly disordered with predominantly metallic Fe and Dy states that became slightly oxidized with annealing in air. The as-prepared amorphous films demonstrated significantly high value of ordinary (∼10 cm2/V s) and anomalous (∼102 cm2/V s) Hall mobility and high electrical conductivity of ∼103 S/cm at room temperature. The cryogenic magnetic property measurement shows two-step magnetization below 200 K, suggesting exchange-spring magnetic interaction. The nature of the field cooled and zero-field cooled curves suggested a spin-glass like transition between 78 K and 80 K, with a characteristic broad peak. The Tauc plot analysis from optical transmission spectra confirms the existence of an optical bandgap of ∼2.42 eV that increased slightly to ∼2.48 eV upon annealing. This rich set of transport, optical, and magnetic properties in these thin films is very exciting and points to potential applicability in low-cost multifunctional devices requiring a combination of transparent, semiconducting, and magnetic responses, such as in spintronics.

Prasad Koirala, Krishna (ORCID:000000029137917X)↗
NASA NTRS1987

The effect of V2O5 on the growth and properties of Bi-YIG

The effect of V2O5 additions to PbO-Bi2O3 flux was investigated with respect to the properties of Bi-YIG epitaxial films for magnetic bubble devices. The Bi content of the films (including an estimated 10 percent Pt(2+) were calculated from Faraday rotation measurements. For films grown at constant supercooling, the Bi content increased by 60 percent as the V2O5 content of the flux was increased from 0 to 9 mol pct. Lattice constant data were shown to agree with measured Bi and Ca-Si contents. The growth-induced magnetic anisotropy increased proportionally to the Bi content and could be fairly represented by a model; however, the coefficients of the model vary widely between data sets for different melt compositions.

Luther, L. C.↗
NASA NTRS1992

Magnetic flux relaxation in YBa2Cu3O(7-x) thin film: Thermal or athermal

The magnetic flux relaxation behavior of YBa2Cu3O(7-x) thin film on LaAlO3 for H parallel c was studied in the range of 4.2-40 k and 0.2-1.0 T. Both the normalized flux relaxation rate (S) and the net flux pinning energy (U) increase continuously from 1.3 x 10 exp -2 to 3.0 x 10 exp -2 and from 70-240 meV respectively, as the temperature (T) increases from 10 to 40 K. This behavior is consistent with the thermally activated flux motion model. At low temperatures, however, S is found to decrease much more slowly as compared with kT, in contradiction to the thermal activation model. This behavior is discussed in terms of the athermal quantum tunneling of flux lines. The magnetic field dependence of U, however, is not completely understood.

Vitta, Satish↗
NASA NTRS1991

Magnetic flux relaxation in YBa2Cu3)(7-x) thin film: Thermal or athermal

The magnetic flux relaxation behavior of YBa2Cu3O(7-x) thin film on LaAlO3 for H is parallel to c was studied in the range 4.2 - 40 K and 0.2 - 1.0 T. Both the normalized flux relaxation rate S and the net flux pinning energy U increase continuously from 1.3 x 10(exp -2) to 3.0 x 10(exp -2) and from 70 to 240 meV respectively, as the temperature T increases from 10 to 40 K. This behavior is consistent with the thermally activated flux motion model. At low temperatures, however, S is found to decrease much more slowly as compared with kT, in contradiction to the thermal activation model. This behavior is discussed in terms of the athermal quantum tunneling of flux lines. The magnetic field dependence of U, however, is not completely understood.

Vitta, Satish↗
NASA NTRS2012

Large-Strain Transparent Magnetoactive Polymer Nanocomposites

A document discusses polymer nano - composite superparamagnetic actuators that were prepared by the addition of organically modified superparamagnetic nanoparticles to the polymer matrix. The nanocomposite films exhibited large deformations under a magnetostatic field with a low loading level of 0.1 wt% in a thermoplastic polyurethane elastomer (TPU) matrix. The maximum actuation deformation of the nanocomposite films increased exponentially with increasing nanoparticle concentration. The cyclic deformation actuation of a high-loading magnetic nanocomposite film was examined in a low magnetic field, and it exhibited excellent reproducibility and controllability. Low-loading TPU nanocomposite films (0.1-2 wt%) were transparent to semitransparent in the visible wavelength range, owing to good dispersion of the magnetic nanoparticles. Magnetoactuation phenomena were also demonstrated in a high-modulus, high-temperature polyimide resin with less mechanical deformation.

Meador, Michael A.↗
DOE OSTI2023

Colloquium : Quantum anomalous Hall effect

The quantum Hall (QH) effect, quantized Hall resistance combined with zero longitudinal resistance, is the characteristic experimental fingerprint of Chern insulators—topologically nontrivial states of two-dimensional matter with broken time-reversal symmetry. In Chern insulators, nontrivial bulk band topology is expressed by chiral states that carry current along sample edges without dissipation. Here, the quantum anomalous Hall (QAH) effect refers to QH effects that occur in the absence of external magnetic fields due to spontaneously broken time-reversal symmetry. The QAH effect has now been realized in four different classes of two-dimensional materials: (i) thin films of magnetically (Cr- and/or V-) doped topological insulators in the (Bi,Sb) 2 T 3 family, (ii) thin films of the intrinsic magnetic topological insulator MnBi 2 Te 4 , (iii) moiré materials formed from graphene, and (iv) moiré materials formed from transition-metal dichalcogenides. In this Colloquium, the physical mechanisms responsible for each class of QAH insulator are reviewed, with both differences and commonalities highlighted, and potential applications of the QAH effect are commented upon.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ultra-low magnetic damping in epitaxial Li 0.5 Fe 2.5 O 4 thin films

The realization of more energy efficient nanomagnetic information devices relies on the existence of magnetic insulators capable of supporting pure spin currents in the absence of a dissipative charge current. Currently, there is a limited number of thin-film magnetic insulators with low magnetic damping. Li 0.5 Fe 2.5 O 4 (LFO) is well known to possess the lowest damping among the bulk spinel structure oxides, but, thus far, LFO thin films have not lived up to these expectations. Here, we demonstrate low magnetic damping (even lower than typical bulk values) and bulk magnetization in 3 nm thick epitaxial LFO thin films. At room temperature, SQUID magnetometry shows a high saturation magnetization of 320 kA/m, and broadband ferromagnetic resonance measurements yield an effective Gilbert damping parameter of 1.3×10 -3 , which is among the lowest reported for ferro-/ferrimagnetic films of comparable thickness. Our results show the promise of LFO as a candidate material for spin current-based spintronics.

36 MATERIALS SCIENCE↗
NASA NTRS1989

Chemical-Vapor Deposition Of Cd1-xMnxTe

Experimental process makes films with interesting magnetic and magneto-optical properties. Films of dilute magnetic semiconductor alloy Cd1-xMnxTe deposited on glass and GaAs substrates by metalorganic chemical-vapor deposition (MOCVD). Devices made with Cd1-xMnxTe films known to exhibit strong photoluminescence, stimulated emission, and magnetically-tunable lasing action. In addition, energy-band gaps of such material tailored by altering its composition - property giving flexibility in development of high-efficiency cascade solar photovoltaic cells. Performs at atmospheric pressure, resulting in more-uniform films, covering larger area, and enabling higher production rate.

Nouhi, Akbar↗
NASA NTRS1972

Wall contraction in Bloch wall films

The phenomenon of wall contraction characterized by a peak in the velocity field relationship and a region of negative differential mobility is observed. Uniaxial magnetic thin films of various compositions and magnetic properties are studied in careful interrupted pulse experiments. The observed results agree quite well with the theory for bulk samples.

Bartran, D. S.↗