Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNESIUM OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

MgZnO High‐Voltage Transparent Thin‐Film Transistors Built on Glass

Recently, there has been increasing interest in building‐integrated photovoltaic (BIPV), which enables harvesting solar energy effectively. Large‐area glass components such as windows are widely used in modern constructions. In addition to the PV on opaque components such as walls and roofs, the transparent photovoltaic (TPV) directly built on glass is complementary to fully utilize the PV energy in BIPV. A high‐voltage transparent thin‐film transistor (HVTTFT) built on glass is an ideal option for distributed microinverters for TPV modules. A wide‐bandgap oxide‐based HVTTFT on glass for this purpose is reported. The HVTTFT on glass uses ZnO‐based materials with different functions for two roles: a semiconductor Mg 0.01 Zn 0.99 O (MZO) as TFT channel and Al‐doped ZnO (AZO) as transparent conductive oxide (TCO) electrodes. The centrosymmetric circular structure of the MZO HVTTFT with a high‐k‐stacking gate dielectric enables a blocking voltage as high as ≈1 kV and an on/off ratio of 10 6 . The device exhibits an average optical transmittance of 81% over the visible spectrum.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

C−H Activation of Inert Arenes using a Photochemically Activated Guanidinato‐Magnesium(I) Compound

Abstract UV irradiation of solutions of a guanidinate coordinated dimagnesium(I) compound, [{(Priso)Mg} 2 ] 3 (Priso=[(DipN) 2 CNPr i 2 ] − , Dip=2,6‐diisopropylphenyl), in either benzene, toluene, the three isomers of xylene, or mesitylene, leads to facile activation of an aromatic C−H bond of the solvent in all cases, and formation of aryl/hydride bridged magnesium(II) products, [{(Priso)Mg} 2 (μ‐H)(μ‐Ar)] 4 – 9 . In contrast to similar reactions reported for β‐diketiminate coordinated counterparts of 3 , these C−H activations proceed with little regioselectivity, though they are considerably faster. Reaction of 3 with an excess of the pyridine, p ‐NC 5 H 4 Bu t (py Bu t ), gave [(Priso)Mg(py Bu t H)(py Bu t ) 2 ] 10 , presumably via reduction of the pyridine to yield a radical intermediate, [(Priso)Mg(py Bu t ⋅)(py Bu t ) 2 ] 11 , which then abstracts a proton from the reaction solvent or a reactant. DFT calculations suggest two possible pathways to the observed arene C−H activations. One of these involves photochemical cleavage of the Mg−Mg bond of 3 , generating magnesium(I) doublet radicals, (Priso)Mg⋅. These then doubly reduce the arene substrate to give “Birch‐like” products, which subsequently rearrange via C−H activation of the arene. Circumstantial evidence for the photochemical generation of transient magnesium radical species includes the fact that irradiation of a cyclohexane solution of 3 leads to an intramolecular aliphatic C−H activation process and formation of an alkyl‐bridged magnesium(II) species, [{Mg(μ‐Priso −H )} 2 ] 12 . Furthermore, irradiation of a 1 : 1 mixture of 3 and the β‐diketiminato dimagnesium(I) compound, [{( Dip Nacnac)Mg} 2 ] ( Dip Nacnac=[HC(MeCNDip) 2 ] − ), effects a “scrambling” reaction, and the near quantitative formation of an unsymmetrical dimagnesium(I) compound, [(Priso)Mg−Mg( Dip Nacnac)] 13 . Finally, the EPR spectrum (77 K) of a glassed solution of UV irradiated 3 is dominated by a broad featureless signal, indicating the presence of a doublet radical species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Impact of Mg on Pd-based Methane Oxidation Catalysts for Lean-burn Natural Gas Emissions Control

More efficient lean-burn, natural gas engines are limited by greenhouse gas emissions due to methane oxidation catalysts (MOC) that suffer from water inhibition and high temperature activation. Herein, we report that the addition of Mg to supported 1 wt.% Pd MOCs improved hydrothermal stability even after severe hydrothermal aging. The superior methane oxidation activity compared to the corresponding Mg-free catalyst was attributed to (1) influence of Mg during surface roughening and restructuring at 700 °C on metal-support interaction, (2) reducibility of PdOx sites and (3) preferential stabilization of active Pd (1 0 0) facets in the sample as was evidenced by H 2 TPR and CO TPD characterization experiments. Methane conversion under synthetic exhaust conditions relevant to natural gas, lean-burn engines were investigated. In conclusion, BET, TPR, CO pulse chemisorption followed by TPD provided valuable insights into the surface area, pore volume, reducibility, Pd dispersion and Pd particle size of the selected catalyst samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Regulating Anionic Redox via Mg Substitution in Mn-Rich Layered Oxide Cathodes Enabling High Electrochemical Stability for Sodium-Ion Batteries

Here, with the limited resources and high cost of lithium-ion batteries (LIBs) and the ever-increasing market demands, sodium-ion batteries (SIBs) gain much interest due to their economical sustainability, and similar chemistry and manufacturing processes to LIBs. As cathodes play a vital role in determining the energy density of SIBs, Mn-based layered oxides are promising cathodes due to their low cost, environmental friendliness, and high theoretical capacity. However, the main challenge is structural instability upon cycling at high voltage. Herein, Mg is introduced into the P2-type Na 0.62 Ni 0.25 Mn 0.75 O 2 cathode to enhance electrochemical stability. By combining electrochemical testing and material characterizations, it is found that substituting 10 mol% Mg can effectively alleviate the P2–O2 phase transition, Jahn-Teller distortion, and irreversible oxygen redox. Moreover, structural integrity is greatly improved. These lead to enhanced electrochemical performances. With the optimized sample, a remarkable capacity retention of 92% in the half cell after 100 cycles and 95% in the full cell after 170 cycles can be achieved. Altogether, this work provides an alternative way to stabilize P2-type Mn-based layer oxide cathodes, which in turn, put forward the development of this material for the next-generation SIBs.

25 ENERGY STORAGE↗
DOE OSTI2022

Codesigning Alloy Compositions of CdSe y Te 1− y Absorbers and Mg x Zn 1− x O Contacts to Increase Solar Cell Efficiency

Thin‐film solar cells such as CdTe are a major commercial photovoltaic technology, with more than 25 GW installed worldwide and levelized costs of electricity competitive with fossil fuels. Further progress may result from integrating CdSe y Te 1− y absorbers with Mg x Zn 1− x O contacts, but the device efficiency is difficult to maximize due to coupled dependence on chemical composition of both alloys. Herein, a high‐throughput approach is demonstrated to codesign chemical compositions in alloyed Mg x Zn 1− x O/CdSe y Te 1− y thin‐film solar cells, using combinatorial libraries of PV devices with orthogonal composition gradients in CdSe y Te 1− y absorbers and Mg x Zn 1− x O contacts. It is found that the solar cell performance is a strong and coupled function of both elemental compositions, with efficiency up to 17.7% ( V OC = 836 mV, fill factor = 69%, J SC = 30.6 mA cm −2 ) at atomic compositions of Mg/(Mg + Zn) ≈18% and average Se/(Se + Te) ≈4%. These performance trends among >100 devices are explained by >100 ns lifetime of photoexcited charge carriers at the Mg x Zn 1− x O/CdSe y Te 1− y interface where strong Se accumulation is also observed. This study reports the optimal compositions of the commercially relevant Mg x Zn 1− x O/CdSe y Te 1− y solar cells and demonstrates a general approach to codesigning performance of alloyed thin‐film solar cells and other optoelectronic devices.

14 SOLAR ENERGY↗
DOE OSTI2023

Effects of Sodium and Magnesium Ions on the Photochemically Induced Heterogeneous Formation of Manganese Oxides and Their Structural Evolution

Manganese (Mn) oxides are abundant in aquatic and terrestrial environments, where they play significant roles in redox cycling and biological metabolisms. We recently observed that Mn oxides were homogeneously formed during the abiotic oxidation of Mn 2+ (aq) to Mn(IV) by O 2 •– via nitrate photolysis, at a rate comparable to that of biotic Mn oxide formation. On the other hand, for the heterogeneous formation of Mn oxides, the presence of a substrate can alter the required thermodynamic driving force, which may affect their crystalline phases and further influence the oxidative capability of redox cycling in environmental systems. However, little is known about the photochemically induced heterogeneous formation of Mn oxides on substrates. In this study, we investigated the heterogeneous formation of Mn oxides on a quartz substrate in the presence of two environmentally abundant cations, Na + and Mg 2+ . In contrast to homogeneously generated Mn oxides, the heterogeneously formed Mn oxides displayed faster crystalline phase evolutions and morphological changes over time. Additionally, the coexistence of Na + and Mg 2+ ions greatly affected the initial crystalline phases and the phase evolution, as well as the surface morphologies of the Mn oxides. Finally, these discoveries contribute to our understanding of how various Mn oxides form in nature and provide insights into the processes involved in manufacturing specific Mn oxide crystalline structures for engineering applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Negative Capacitance MgZnO-Channel Thin-Film Transistor With Ferroelectric NiMgZnO in the Gate Stack

We demonstrate the negative capacitance thin-film transistor (NC-TFT) on glass substrate using the multifunctional MgZnO (MZO). The Mg 0.03 Zn 0.97 O semiconductor layer acts as the TFT channel for stable operation while the Ni-doped MZO, i.e. Ni 0.02 Mg 0.15 Zn 0.83 O (NMZO) serves as the ferroelectric layer in the NMZO/SiO 2 stacking gate dielectric structure. The subthreshold swing (SS) value is significantly reduced over the reference TFT without ferroelectric layer. The minimum SS value of the NC-TFT reaches 52 mV/dec while the on/off ratio of drain current ID reaches 10 9 .

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Mineral Scaling in 3D Interfacial Solar Evaporators–A Challenge for Brine Treatment and Lithium Recovery

In this work, we analyzed the effects of mineral scaling on the performance of a 3D interfacial solar evaporator, with a focus on the cations relevant to lithium recovery from brackish water. The field has been rapidly moving toward resource recovery applications from brines with higher cation concentrations. However, the potential complications caused by common minerals in these brines other than NaCl have been largely overlooked. Therefore, in this study, we thoroughly examined the effects of two common cations (calcium and magnesium) on the long-term solar evaporation performance of a 3D graphene oxide stalk. The 3D stalk can achieve an evaporation flux as high as 17.8 kg m –2 h –1 under one-sun illumination, and accumulation of NaCl on the stalk surface has no impact. However, the presence of CaCl 2 and MgCl 2 significantly reduces the evaporative flux even in solutions lacking scale-forming anions. A close examination of scale formation during long-term evaporation experiments revealed that CaCl 2 and MgCl 2 tend to precipitate out within the stalk, thus blocking water transport through the stalk and significantly dropping the evaporation rates. These findings imply that research attention is needed to modify and optimize the internal water transport channels for 3D evaporators. Additionally, we emphasize the importance of testing realistic mixtures–including prominent divalent cations– and testing long-term operations in interfacial solar evaporation research and investigating approaches to mitigate the negative impacts of divalent cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

High-temperature corrosion of a nickel-based alloy in a molten chloride environment – The effect of thermal and chemical purifications

There is currently an ever-increasing demand for higher process efficiencies in next generation (Gen3) concentrating solar power (CSP). Higher process efficiencies may be procured by increasing the operating temperature, and simultaneously, minimizing the degradation of materials used for construction of CSP plants (e.g., piping, thermal storage tanks, solar receivers and heat exchangers). Thus, understanding materials corrosion in the presence of molten salt mixtures used as thermal energy storage media and heat transfer fluids is indispensable for CSP development. The present paper provides insights into the effects of salt purification on the corrosion of a nickel-based alloy (Haynes 230) isothermally exposed to a stagnant chloride-based salt mixture at 800 °C. The MgCl 2 -based salt mixture was thermally dehydrated and chemically treated with (0.1 and 0.5 wt %) elemental magnesium. Results reveal the electrochemical nature of the corrosion process, and the formation of corrosion products such as oxides (MgO, MgCr 2 O 4 , and MgAl 2 O 4 ) and nitrides (CrN) on the alloy surface and in sub-surface regions. Magnesium additions enhanced the ability to resist corrosion by reducing the concentration of impurities (H 2 O, MgOH + , OH - species) and polarizing the alloy surface. The formation of nitrides in all cases studied indicates the impact of using nitrogen as a protective gas in the system. Results also reveal that a single step treatment of the salt using metallic Mg could be considered as a measure to control the salt's impurity level, e.g., if required for system control.

14 SOLAR ENERGY↗
DOE OSTI2025

Fabrication and characterization of nanoscale magnesium diboride and tetraboride for propulsion and hydrogen storage applications

Abstract: Boron-loaded propellants have the potential to dramatically increase the performance of solid fuel ramjets, ducted rockets, and hybrid rocket engines. However, difficult ignition of boron decreases the combustion efficiency of these propellants. One approach to solving this problem involves the use of magnesium diboride, MgB2, which ignites easier than boron. Magnesium tetraboride, MgB4, potentially offers greater energetic performance as B has a higher energy density than Mg. However, the effect of the higher boron/metal ratio on the ignition and combustion is unclear. Nanoscale MgB2 particles and quasi 2D structures are promising propellant ingredients, but the oxidation and combustion properties of nanoscale MgB4 remain unknown. Nanoscale magnesium borides are also of interest as precursors for the synthesis of magnesium borohydride, Mg(BH4)2, a promising hydrogen storage material, but hydrogenation of MgB4 has not been studied yet. The objectives of the present work included synthesis, purification, and high-energy ball milling of MgB2 and MgB4 powders as well as investigation of their hydrogen uptake, thermal decomposition, oxidation, and combustion. The powders were fabricated by combustion synthesis and by heating in a tube furnace. The latter method was superior in the synthesis of MgB4. Oxide impurities in the synthesized powders were removed by acid leaching. Nanoscale powders were obtained by ball-mill exfoliation. The hydrogen intake of the obtained magnesium borides was examined at 700 bar and 300 ℃ and did not reveal any advantage of MgB4 over MgB2. Their thermal decomposition and oxidation were investigated with thermogravimetric analysis (TGA), while their combustion was studied using laser ignition and high-speed video recording. TGA has confirmed prior observations of multistep decomposition of magnesium borides, where each step involves formation of a boride with a higher B/Mg ratio and evaporation of formed magnesium. The oxidation rates of the borides are much higher than that of boron at temperatures over 1200 °C for MgB2 and over 900 °C for MgB4. The burning rates of non-milled MgB₂ and MgB₄ powders were much higher than for the used submicron boron. Milling the MgB₂ and MgB₄ powders further increased their burning rates. The milled MgB4 burned 7.5 times faster than submicron boron.

Combustion of metals, Solid fuels, Propellants, Hy↗
DOE OSTI2026

Aperture and roughness govern iron oxide passivation in olivine fractures during carbon mineralization

Efficient carbon dioxide mineralization in silicate-rich formations depends on reaction rates within fracture networks, yet the role of fracture microstructure remains poorly constrained. We investigated how fracture aperture and surface roughness influence mineralization by reacting synthetic forsteritic olivine fractures with controlled apertures (0.5–1.6 millimeters) and roughness (6–16 micrometers) with supercritical carbon dioxide at 13.7 megapascals and 185 degrees Celsius. Optical microscopy and Raman spectroscopy showed that rougher fracture surfaces promoted iron oxide precipitation, which passivated olivine surfaces, limiting magnesium availability for carbonate formation while removing iron as a reactant. These effects were more pronounced in smaller-aperture fractures. A geochemical model incorporating surface topography and passivation reproduced the observed trends, confirming that increased roughness can reduce reactivity despite greater surface area. Our results demonstrate that fracture microstructure strongly influences iron oxide passivation and carbon dioxide mineralization, with important implications for predicting long-term performance of engineered carbon dioxide storage systems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Mg x Zn 1−x O contact to CuGa 3 Se 5 absorber for photovoltaic and photoelectrochemical devices

Abstract CuGa 3 Se 5 is a promising candidate material with wide band gap for top cells in tandem photovoltaic and photoelectrochemical (PEC) devices. However, traditional CdS contact layers used with other chalcopyrite absorbers are not suitable for CuGa 3 Se 5 due to the higher position of its conduction band (CB) minimum. Mg x Zn 1− x O (MZO) is a transparent oxide with adjustable band gap and CB position as a function of magnesium composition, but its direct application is hindered by CuGa 3 Se 5 surface oxidation. Here, MZO is investigated as a contact (n-type ‘buffer’ or ‘window’) material to CuGa 3 Se 5 absorbers pretreated in Cd 2+ solution, and an onset potential close to 1 V vs reversible hydrogen electrode in 10 mM hexaammineruthenium (III) chloride electrolyte is demonstrated. The Cd 2+ surface treatment changes the chemical composition and electronic structure of the CuGa 3 Se 5 surface, as demonstrated by photoelectron spectroscopy measurements. The performance of CuGa 3 Se 5 absorber with Cd 2+ treated surface in the solid-state test structure depends on the Zn/Mg ratio in the MZO layer. The measured open circuit voltage of 925 mV is promising for tandem PEC water splitting with CuGa 3 Se 5 /MZO top cells.

36 MATERIALS SCIENCE↗
DOE OSTI2020

When Every Drum is a Win - Tackling a Thirty-Five Thousand Drum Legacy - 20064

Cameco Corporation's (Cameco) Port Hope Conversion Facility (PHCF) was previously owned by the federal Crown Corporation, Eldorado Nuclear, which held a significant inventory of legacy waste material at the time Cameco was formed in 1988. As a result, Cameco was granted an allocation of 150,000 cubic metres of space in the Long-Term Waste Management Facility (LTWMF) located in the Municipality of Port Hope (MPH), which opened to the receipt of Cameco material in June 2018. Cameco is currently undertaking a major site cleanup and renewal of its Port Hope Conversion Facility (PHCF) which is known as the Vision in Motion (VIM) project. Over its operating history, Eldorado accumulated an inventory of over 35,000 drums of accumulated waste that was primarily stored at two offside warehouse locations. In 2017 and 2018, the project focused on repackaging two well characterized legacy wastes (magnesium fluoride slag and depleted uranium titanium oxide) from one of the two offsite locations. At the conclusion of this work, approximately 15,000 drums of these wastes had been repackaged and disposed of at the LTWMF. There remained approximately 1000 drums from this location that either could not be repackaged safely or were different waste types and required further verification and/or processing. The buildings at this location were scheduled for demolition in early 2019, which triggered the development of a process for triaging legacy drums in August 2018, which allowed for preparation and shipment of approximately half of these drums to the LTWMF by March 2019, with the remainder moved to the second offsite warehouse location in February 2019 for further characterization which is ongoing. This paper will discuss key lessons learned as the drummed legacy waste disposal inventory has been reduced to approximately half of the initial inventory. This will include the development of an alternate packaging process; prioritization of characterization activities and selection of techniques where minimal inventory information is available; determination of next step(s) for each drum as it is assessed; key safety considerations; and how to make inroads into an overwhelming task while under public and regulatory scrutiny. In a relatively short period of time, significant progress has been made to organize and gather information about the legacy waste, update the inventory records and determine the most appropriate pathways (i.e. LTWMF disposal, disposal at another appropriate facility, site storage until future processing and/or disposal). Since 2017 the volume of the decades-old legacy waste inventory has decreased significantly. With the majority of the known materials safely disposed of at the LTWMF, every drum removed from the endless rows of 20,000 pyramidally-stacked waste drums with limited history that is safely characterized, prepared and shipped is considered a win. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

High Entropy Rare-earth Oxide (HERO) Coatings for Refractory Alloys

The HERO coating was developed to protect refractory alloys for application in the harsh hot section of the turbine engine environment addressing ARPA-E ULTIMATE Project Topic 2: Coating Development. The effort was both innovative in its utilization of high entropy rare earth oxides as well as transformational in our approach: holistic design of a single layer thermal/environmental barrier coating (T/EBC) for refractory alloys, with an excellent coefficient of thermal expansion (CTE) match to the alloy substrate, chemical compatibility with the underlying alloy, low oxidant permeability, stability in combustion environments, low thermal conductivity, thermal shock resistance, and resistance to degradation by siliceous debris (calcium magnesium alumino-silicates-CMAS). The high entropy rare earth oxide approach enables two critical coating properties: tailoring CTE match to the substrate and, most significantly, substantially reduced thermal conductivity. The summation of these proposed coating capabilities goes well beyond the technical requirements specified in the ULTIMATE program objectives, and additionally is essential for a successful first stage turbine blade application.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Mixed-Anion Contact Ion-Pair Formation Enabling Improved Performance of Halide-Free Mg-Ion Electrolytes

In this article, discovery of stable and efficient electrolytes that are compatible with magnesium metal anodes and high-voltage cathodes is crucial to enabling energy storage technologies that can move beyond existing Li-ion systems. Many promising electrolytes for magnesium anodes have been proposed with chloride-based systems at the forefront; however, Cl-containing electrolytes lack the oxidative stability required by high-voltage cathodes. In this work, we report magnesium trifluoromethanesulfonate (triflate) as a viable coanion for Cl-free, mixed-anion magnesium electrolytes. The addition of triflate to electrolytes containing bis(trifluoromethane sulfonyl) imide (TFSI – ) anions yields significantly improved Coulombic efficiency, up to a 100 mV decrease in the plating/stripping overpotential, improved tolerance to trace H 2 O, and improved oxidative stability (0.35 V improvement compared to that of hybrid TFSI-Cl electrolytes). Based on 19 F nuclear magnetic resonance and Raman spectroscopy measurements, we propose that these improvements in performance are driven by the formation of mixed-anion contact ion pairs, where both triflate and TFSI – are coordinated to Mg 2+ in the electrolyte bulk. The formation of this mixed-anion magnesium complex is further predicted by the density functional theory to be thermodynamically driven. Collectively, this work outlines the guiding principles for the improved design of next-generation electrolytes for magnesium batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Identifying the Role of Magnesium Content in Assessing the Electrochemical Performance of (CoCuMgNiZn)O

High-entropy oxides (HEOs) featuring 5 or more metals in approximately equimolar ratios, such as the prototypical rock-salt-structured (CoCuMgNiZn)O, have attracted interest for their potential to display material properties superior to oxides with combinations of 4 or fewer of the component metals. In particular, (CoCuMgNiZn)O has shown promise as an anode for lithium-ion batteries with a high specific capacity retention over extended cycling. Previous studies have suggested that magnesium, despite being electrochemically inert, provides a crucial contribution to the favorable performance of this HEO by stabilizing the crystal structure through repeated charge–discharge cycles. This paper probes the extent and mechanism of the magnesium effect by using a facile microwave-assisted hydrothermal synthesis method to vary the level of Mg content. Moreover, we extensively characterized the product with techniques such as 4D-STEM and ICP-OES, which have not previously been applied in combination with this material, in order to elucidate the relationships among chemical composition, nanostructure, and performance. Here, we show that the level of Mg incorporation is positively correlated with long-term stability and negatively correlated with rate capacity, and that the latter effect yields a stronger influence upon the overall performance, with the best-performing sample possessing a Mg quantity equivalent to ∼1/5 that of an equimolar concentration. This finding demonstrates not only that the variation of individual elemental levels offers a promising and relatively unexplored avenue to optimize the electrochemical performance of HEO materials but also that it should not be assumed that equimolar compositions of constituent elements are necessarily the best.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The Impact of Ethylenediaminetetraacetic Acid (EDTA) on the Sorption of Nd(III), Th{sup (IV)}, and U(VI) onto Dolomite in WIPP-Relevant Brines, GWB and ERDA-6 - 20356

Storage of legacy, transuranic waste at the Waste Isolation Pilot Plant (WIPP) requires accurate risk models for performance assessments. These models must predict the long-term fate and transport of contaminants in the WIPP and surrounding environment. Laboratory support is necessary for the development of an accurate model through better understanding of contaminant behavior in the WIPP. The WIPP is a deep geologic repository that is characterized by high ionic strength due to evaporite deposits in the Salado formation (porewaters up to 7.4 M). High concentrations of sodium chloride (NaCl), calcium chloride (CaCl{sub 2}), and magnesium chloride (MgCl{sub 2}) are particularly of concern due to their potential impact on solubility and ultimately transport of contaminants of concern. Additionally, ligands capable of forming strong complexes with metals are found in significant concentrations in the WIPP environment due to their disposal from waste processing and formation during degradation of repository components (e.g. cellulose degradation by calcium hydroxide in cement). Consequently, there is a need to investigate the fate and transport of contaminants in the WIPP environment with a focus on the effects of high ionic strength and strongly coordinating ligands. Contaminants of high concern include the actinides (U(VI), Pu(IV), and Am(III)). Laboratory support of the WIPP modeling efforts was provided by this research. A series of batch experiments were utilized to study the impact of ionic strength, contaminant concentration, and the presence of ethylenediaminetetraacetic acid (EDTA) on the sorption of Nd(III), Th(IV), and U(VI) onto dolomite, a carbonate mineral found within the Culebra formation. The Culebra formation is the most transmissive layer above the WIPP, making transport of contaminants the most likely route in previous risk assessments. Two brines specifically designed to imitate conditions within the WIPP environment were used in these experiments. The U.S. Energy Research and Development Administration Well 6 (ERDA-6, 95%) brine simulates a low Mg environment, while the generic weep brine (GWB, 95%) simulates the WIPP environment with a high Mg concentration. Mg is added to the repository in the form of MgO as an engineered barrier and is naturally present in some formations. It is expected to scavenge carbonate from solutions decreasing formation of the highly soluble and competitive uranium-carbonate complexes. EDTA is used during manipulations of nuclear materials due to its ability to form strong, stable complexes with the actinides and may be found in high concentrations (up to 0.08 mM) within the WIPP as waste canisters degrade. Further, it may provide additional avenues for unwanted transport of contaminants. Nd(III) and Th(IV) were used as stable analogues of Am(III) and Pu(IV), respectively, to represent the most common oxidation states of actinides in the WIPP environment in addition to U(VI). The potential for colloid formation was also investigated with low and high concentrations of contaminants (10 and 1000 μg/L) using three size-dependent particle separation steps. The results of this research provide a better understanding of potential behavior of actinides in the presence of EDTA and within WIPP-relevant brines. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Pyrogenic Organic Matter Laboratory Experiment: Aerobic Respiration and Geochemistry from Variably Inundated Stream Sediments (v3)

This dataset supports a broader study examining the effects of variable inundation and pyrogenic organic matter on ecosystem respiration. The dataset provides data generated from a laboratory batch experiment investigating the interaction between variable inundation conditions (wet and dry sediment) and pyrogenic organic matter (burned and unburned treatments). The contents include time series dissolved oxygen, sediment geochemistry data, and field metadata (including qualitative information on instream and river corridor characteristics). This data package was originally published in November 2025. It was updated in April 2026 (v2; new and modified files) and May 2026 (v3; modified files). See the change history section in the readme for more details For details on how to navigate data packages generated by this project, see https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About. In addition to a readme, this data package also includes a file-level metadata (FLMD) file that describes each file and a data dictionary (DD) that describes all column/row headers and variable definitions. This dataset is comprised of (1) file-level metadata; (2) data dictionary; (3) field metadata; (4) international generic sample number (IGSN) mapping file; (5) readme; (6) field protocol; (7) sample name metadata; (8) an environmental context picture for the dry and inundated sampling locations; and (9) a subfolder with sample data from the sediment incubation experiment. The sample data subfolder contains (1) dissolved organic carbon (DOC, measured as non-purgeable organic carbon, NPOC); (2) total nitrogen (TN); (3) gravimetric moisture; (4) partial pressure and production rates of carbon dioxide, methane, and nitrous oxide; (5) field wet sediment mass, dry sediment mass, water mass, and field wet sediment volume in incubation and sediment NPOC/TN vials; (6) methods codes; (7) respiration rates, pH, and temperature from after the incubation, raw time series dissolved oxygen and temperature, and a subfolder containing associated plots and scripts; (8) ions; (9) FTICR-MS methods; and (10) a subfolder of 12 Tesla (12T) FTICR-MS data. This folder contains the CoreMS processed data and three subfolders, one containing the .xml files, one containing the CoreMS output files, and the other containing instructions and scripts for processing the files in CoreMS (https://github.com/EMSL-Computing/CoreMS). All files are .csv, .pdf, .R, .xml, .html, .Rmd, .py, .cal, .json, or .jpg.

54 ENVIRONMENTAL SCIENCES↗