Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Low pH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

An Active–Site Sulfonate Group Creates a Fast Water Oxidation Electrocatalyst That Exhibits High Activity in Acid

The storage of solar energy in chemical bonds will depend on pH–universal catalysts that are not only impervious to acid, but actually thrive in it. Whereas other homogeneous water oxidation catalysts are less active in acid, we report a catalyst that maintained high electrocatalytic turnover frequency at pH values as low as 1.1 and 0.43 (k cat = 1501±608 s –1 and 831±254 s –1 , respectively). Moreover, current densities, related to catalytic reaction rates, ranged from 15 to 50 mA cm –2 mM –1 comparable to those reported for state–of–the–art heterogeneous catalysts and 30 to 100 times greater than those measured for two prominent literature homogeneous catalysts at pH 1.1 and 0.43. The catalyst also exhibited excellent durability when a chemical oxidant was used (Ce IV , 7400 turnovers, TOF 0.88 s –1 ). Here, preliminary computational studies suggest that the unusual active–site sulfonate group acts a proton relay even in strong acid, as intended.

14 SOLAR ENERGY↗
DOE OSTI2025

Application of pH-dependent environmental protection agency test method 1313 to low-activity nuclear waste glass

Here, in this study, we present results of a room temperature, pH-dependent leach test established by United States Environmental Protection Agency (EPA) Leaching Environmental Assessment Framework (LEAF) (EPA Method 1313 and further abbreviated EPA 1313) to study the alteration behavior of low-activity nuclear waste (LAW) glasses. Implementation of EPA 1313, which is closer to LAW disposal temperatures, could allow for more flexibility in the formulation of Hanford LAW glasses, specifically in terms of increased waste loading. A set of 48 LAW glasses were selected to test with EPA 1313. Briefly, the test method consists of adding glass to a number of solutions at different initial pH values and at a fixed mass-to-solution-volume ratio. The glass is then allowed to corrode for two days and the final solution pH and concentration of different glass elements in solution is measured. The test was modified from the published procedure to constrain particle size to provide more reproducible results, reduce the studied pH range to a more applicable range, and to reduce solution volume to reduce costs associated with material preparation. Compositional modeling was used to predict the measured elemental releases at various pH. The model predictions improved in tests where there was a relatively small difference between initial and final solution pH indicating that pH controls would result in better predictive models.

Accelerated aging↗
DOE OSTI2020

LixNiO/Ni Heterostructure with Strong Basic Lattice Oxygen Enables Electrocatalytic Hydrogen Evolution with Pt-like Activity

The low-cost hydrogen production from water electrolysis is crucial for practical deployment of sustainable hydrogen economy, but is often constrained by the lack of active and robust electrocatalysts from Earth-abundant materials. We describe here an unconventional heterostructure composed of strongly coupled Ni-deficient LixNiO nanoclusters and polycrystalline Ni nanocrystals, and its exceptional activities toward hydrogen evolution reaction (HER) in aqueous electrolytes. The presence of unique lattice oxygen species with strong Brønsted basicity is a significant feature, which spontaneously split water molecules and effectively accelerate the sluggish Volmer H-OH dissociation step in neutral and alkaline HER. In combination with the unpreceded level of intimate LixNiO and Ni interfacial junctions that produces abundant “hotspots” for promoted hydride coupling, the catalyst exhibited kinetic activities almost identical as Pt/C and decent long term stability in universal pH.

Lu, Ke↗
DOE OSTI2022

Three-Electrode Study of Electrochemical Ionomer Degradation Relevant to Anion-Exchange-Membrane Water Electrolyzers

Among existing water electrolysis (WE) technologies, anion-exchange-membrane water electrolyzers (AEMWEs) show promise for low-cost operation enabled by the basic solid-polymer electrolyte used to conduct hydroxide ions. The basic environment within the electrolyzer, in principle, allows the use of non-platinum-group metal catalysts and less-expensive cell components compared to acidic-membrane systems. Nevertheless, AEMWEs are still underdeveloped, and the degradation and failure modes are not well understood. To improve performance and durability, supporting electrolytes such as KOH and K 2 CO 3 are often added to the water feed. The effect of the anion interactions with the ionomer membrane (particularly other than OH – ), however, remains poorly understood. We studied three commercial anion-exchange ionomers (Aemion, Sustainion, and PiperION) during oxygen evolution (OER) at oxidizing potentials in several supporting electrolytes and characterized their chemical stability with surface-sensitive techniques. We analyzed factors including the ionomer conductivity, redox potential, and pH tolerance to determine what governs ionomer stability during OER. Specifically, we discovered that the oxidation of Aemion at the electrode surface is favored in the presence of CO 3 2– /HCO 3 – anions perhaps due to the poor conductivity of that ionomer in the carbonate/bicarbonate form. Sustainion tends to lose its charge-carrying groups as a result of electrochemical degradation favored in basic electrolytes. PiperION seems to be similarly negatively affected by a pH drop and low carbonate/bicarbonate conductivity under the applied oxidizing potential. Furthermore, the insight into the interactions of the supporting electrolyte anions with the ionomer/membrane helps shed light on some of the degradation pathways possible inside of the AEMWE and enables the informed design of materials for water electrolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Proteome-wide analysis of protein stability in Escherichia coli under acid stress

Knowledge of protein acid sensitivity remains sparse and is largely derived from low-throughput, enzyme-specific assays. We used a scalable framework to map acid stability across the Escherichia coli proteome to assess the acid stability of 1,675 unique proteins, estimating pH 50 values for over 90% of them. The parameter pH50 was defined as the pH value at which only 50% of the initial protein remains in solution following acid treatment. Proteome-wide pH 50 values ranged from 2.28 to 6.33 (median 5.11). Approximately 9% of detected proteins remained stable across all tested pH conditions. Our results align with published data and the assay of citrate synthase (GltA) performed here. Protein acid stability differed significantly by subcellular localization: periplasmic proteins were relatively more abundant in the acid-stable group, cytoplasmic proteins were abundant at pH 50 values 4.5–5.5, and inner membrane proteins at higher pH 50 between 5.5 and 6.0. Outer membrane proteins were too few to draw strong conclusions regarding enrichment within specific pH 50 groups. Notably, the periplasmic binding protein of the molybdate ABC transporter (ModA), was enriched after incubation at low pH. Estimated pH 50 values showed no correlation with protein isoelectric point and molecular weight. Together, this work provides the first proteome-wide map of protein acid stability and establishes a general framework for studying different chemical stressors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Sulfonate Group Improves the Solubility and Electrocatalytic Performance of Ru‐Based bda‐ and pda‐Type Water Oxidation Catalysts under Neutral Conditions

Four ruthenium water oxidation catalysts that bear carboxylate and sulfonate groups in the active site have been synthesized and analyzed for their catalytic activity. Here, the sulfonate‐containing catalysts show higher electrochemical activity in pH 7 phosphate buffer with 4 times larger catalytic current, improved durability with sacrificial oxidant, and increased solubility compared to similar species containing two carboxylate groups. Density functional theory calculations suggest that the sulfonate group provides a more favorable geometry for water nucleophilic attack, which is both the energetically most favorable mechanism calculated and the experimentally predicted mechanism under electrochemical conditions. Further experimental studies have been performed to show that under certain conditions catalysts can perform well electrochemically under pH conditions as low as 1.6 and that various structural components can greatly change solubility and catalytic operation.

14 SOLAR ENERGY↗
DOE OSTI2026

Desorption of Phosphate from Iron-Bearing Soil Minerals by a Plant Secondary Metabolite

In soils, phosphorus readily adsorbs to the surfaces of ubiquitous iron (oxyhydr)oxide minerals, rendering it less accessible to plants and microorganisms. Plants have a number of strategies to access iron, among them the secretion of redox-active metabolites from their roots. Although these strategies likely increase the bioavailability of surface-adsorbed phosphorus through reductive dissolution, their effect on phosphorus cycling has not yet been investigated. We tested the ability of fraxetin, a coumarin-type redox-active metabolite produced by the model plant Arabidopsis thaliana and other dicotyledon plant species, to reductively solubilize phosphate from the surface of ferrihydrite. Our findings show that, at low and neutral pH, fraxetin increased aqueous phosphate concentrations under both oxic and anoxic conditions; at high pH, it was only effective in anoxic experiments. Additionally, a combination of liquid chromatography–mass spectrometry and spectroscopic methods demonstrated substantial fraxetin adsorption to the mineral surface but showed that iron reduction did not alter the mineral structure or change the nature of the chemical environment of the phosphorus atom over short time scales. These results provide evidence that the secretion of redox-active metabolites from roots is likely to be an effective phosphorus acquisition tactic in iron-rich soils.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Highly Selective Electrolytic Reduction of CO 2 to Ethylene

We investigate the reduction of CO 2 to ethylene across buffered anolyte pH values 4 to 14 using a copper–phosphorus (Cu–P) electrocatalyst in a zero-gap membrane electrode assembly. Electrochemical CO 2 reduction using alkaline electrolytes typically shows limited carbon efficiencies and single-pass efficiencies, while acidic conditions typically favor the hydrogen evolution reaction. Results from this work show that weakly phosphate-buffered acidic anolytes (pH 6) maximize ethylene production with a 73% FE at 300 mA cm –2 and 51% FE at 500 mA cm –2 , including a 51% single-pass CO 2 conversion efficiency for over 400 h of continuous operation. We propose a mechanism based on pH-dependent CO coverage that controls the selectivity at the *HCCOH intermediate. Low CO coverage at pH 6 favors hydroxide elimination to *CCH, yielding ethylene (98% of C 2 products), while high coverage at pH 14 promotes hydrogenation to ethanol (44% of C 2 ). The HER mechanism transitions from H 2 O-mediated at pH 14 to phosphate-mediated (H 2 PO 4 – /HPO 4 2– ) at weakly acidic pH, minimizing HER competition at pH 6. This mechanistic understanding enables controlled C 2 product selectivity through manipulation of the CO coverage and local proton activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Anthraquinone Flow Battery Reactants with Nonhydrolyzable Water-Solubilizing Chains Introduced via a Generic Cross-Coupling Method

Water-soluble anthraquinones (AQs) hold great promise serving as redox-active species in aqueous organic flow batteries. Systematic investigations into how the properties of redox molecules depend on the water-solubilizing groups (WSGs) and the way in which they are bound to the redox core are, however, still lacking. We introduce WSGs linked to anthraquinone by C=C bonds via a cross-coupling reaction and convert C=C to C–C bonds through hydrogenation. The anthraquinone and the WSGs are connected via (un)branched chains with (un)saturated bonds. We investigate the influence of chains and ionic ending groups on the redox potentials of the molecules and identify three important trends: (1) The electron-withdrawing ending groups can affect the redox potentials of AQs with two unsaturated hydrocarbons on the chains through π-conjugation. (2) For chains with two (un)saturated straight hydrocarbons, WSGs increase the redox potentials of the AQs in the order PO 3 2– < CO 2 – < SO 3 – . (3) AQs with (un)saturated chains at high pH possess desirably low redox potentials, high solubilities, and high stability. Disproportionation leads to the formation of anthrone, which can be regenerated to anthraquinone. Tautomerization results in the saturation of alkene chains, stabilizing the structure. Here, we utilize these observations to identify a potentially low-cost and long-lifetime negative electrolyte that demonstrates a temporal fade rate as low as 0.0128%/day when paired with a potassium ferrocyanide positive electrolyte.

25 ENERGY STORAGE↗
DOE OSTI2023

Formation and evolution of carbonaceous asteroid Ryugu: Direct evidence from returned samples

Samples of the carbonaceous asteroid Ryugu were brought to Earth by the Hayabusa2 spacecraft. We analyzed 17 Ryugu samples measuring 1 to 8 millimeters. Carbon dioxide–bearing water inclusions are present within a pyrrhotite crystal, indicating that Ryugu’s parent asteroid formed in the outer Solar System. The samples contain low abundances of materials that formed at high temperatures, such as chondrules and calcium- and aluminum-rich inclusions. The samples are rich in phyllosilicates and carbonates, which formed through aqueous alteration reactions at low temperature, high pH, and water/rock ratios of <1 (by mass). Less altered fragments contain olivine, pyroxene, amorphous silicates, calcite, and phosphide. Numerical simulations, based on the mineralogical and physical properties of the samples, indicate that Ryugu’s parent body formed ~2 million years after the beginning of Solar System formation.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Complete Genome Sequence of Sulfurospirillum sp. Strain ACS DCE , an Anaerobic Bacterium That Respires Tetrachloroethene under Acidic pH Conditions

Sulfurospirillum sp. strain ACS DCE couples growth with reductive dechlorination of tetrachloroethene to cis-1,2-dichloroethene at pH values as low as 5.5. The genome sequence of strain ACS DCE consists of a circular 2,737,849-bp chromosome and a 39,868-bp plasmid and carries 2,737 protein-coding sequences, including two reductive dehalogenase genes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Application of electron beam technology to decompose persistent emerging drinking water contaminants: poly- and perfluoroalkyl substances (PFAS) and 1,4-Dioxane

Poly- and perfluoroalkyl substances (PFAS) and 1,4-dioxane are persistent emerging contaminants that are currently under consideration for federal and state-specific regulations in drinking water. Both PFAS and 1,4-dioxane are highly resistant to degradation and are not effectively removed by conventional drinking water treatment systems. Results from the Unregulated Contaminant Monitoring Rule 3 survey showed that >540 sites across the nation are contaminated with both PFAS and 1,4-dioxane. Hence, there is a need to identify technologies that can effectively remove both these contaminants. Water treatment via electron beam (e-beam) has been proven effective at treating a wide range of contaminants, including perfluorooctane sulfonate (PFOS), perfluorooctanoate (PFOA), polychlorinated biphenyls, and trichloroethylene. While the e-beam process is often considered similar to advanced oxidation processes (AOPs), e-beam technology is unique in that it produces both highly oxidizing and reducing species at the same time. The specific objectives of this study were to: (i) determine the effectiveness of 9 MeV electrons provided by the Fermilab’s Accelerator Application Development and Demonstration (A2D2) tool to decompose PFAS and 1,4-dioxane; (ii) assess the formation of byproducts during water treatment; (iii) apply the optimized treatment to field groundwater samples contaminated with PFAS and 1,4-dioxane, and (iv) assess the energy demands for the treatment of these contaminants using e-beam. Results from this study showed that e-beam is effective in treating both 1,4-dioxane and PFAS. Complete degradation of 1,4-dioxane was observed at a dose of 5 kGy for an initial concentration of up to 1 ppm without the need for any sample modification. The electrical energy per order (EEo) for treatment of 1,4-dioxane ranged from 0.46 to 0.72 kWh/m 3 /order and was comparable and even lower, in some cases, than other AOP technologies. Alkaline conditions (pH 13) and low dissolved oxygen concentration (2 mg/L) highly favored the treatment of PFAS by e-beam. Greater than 90% removal of PFOA and PFOS from an initial concentration of 100 to 500 ppb was achieved at a dose of 250 kGy and 500 kGy, respectively, under optimized conditions. The degradation efficiency was not significantly changed when treating other PFAS of fluorinated carbon chain length of 5 to 7 individually at 250 kGy with a removal ranging from 85¬–99% for different compounds. Short chain PFAS (perfluorobutanoate: PFBA and perfluorobutane sulfonate: PFBS) did not degrade under the same conditions at 250 kGy, but 70 to 99% degradation was observed at a higher dose of 1000 kGy. Short chain PFAS (perfluorohexanoate: PFHxA (C5) and perfluoroheptanoate: PFHpA (C6)) were detected after treatment of PFOA, but not after PFOS treatment. Inability to close the mass balance through targeted analysis suggests the presence of other intermediates not detectable by available analytical methods. When treating PFAS mixture containing ten compounds at equimolar concentration of 0.05 µM each, preferential degradation of polyfluorinated compound (6:2 fluorotelomer sulfonate or 6:2 FTS) followed by C8 and C7 compounds was observed as a function of increasing e-beam dose. About 30% degradation of ΣPFAS was observed at 250 kGy and no further removal was observed up to a dose of 1000 kGy. C4 to C6 PFASs showed no degradation, while C3 PFAS (PFBS) showed an increase in concentration by 34% at 1000 kGy due to formation from the breakdown of other long chain PFAS. These results suggested that (a) the reaction kinetics is likely different for different PFAS based on chain length, functional group, and the degree of fluorination of the carbon chain, and (b) there may be intermediates generated from the degradation of 6:2 FTS and C7/C8 compounds that can potentially scavenge hydrated electrons needed for reaction with the untreated PFAS molecules. Treatment of three PFAS-contaminated groundwater samples from two US states showed similar trends as observed in the treatment of equimolar PFAS mixtures. Up to 71% removal of ΣPFAS was achieved in real groundwater samples at 750 kGy and data trend suggested that higher degradation is feasible if higher doses (>1MGy) are applied to treat field samples to overcome matrix effects and competing species. Calculated EEo for PFAS ranged from as low as ~48 to 1081 kWh/m 3 /order depending on the type of PFAS treated. These values are comparable and even lower, in some cases, than other destructive technologies employed for PFAS treatment such as ultrasound, plasma, and photochemical treatment. The results from this study indicate e-beam is a promising approach under favorable conditions and should be explored further as an end-of-train treatment option for PFAS destruction.

1,4-Dioxane↗
DOE OSTI2025

Low-Cost Screening of Algae for Extreme Tolerance to pH, Temperature, Salinity, and Light

AbstractBioprospecting algae strains with tolerance to extreme conditions such as pH, temperature, salinity, and light is crucial for advancing biotechnology and environmental applications. However, traditional screening methods often involve significant costs and labor, restricting their accessibility and practical use. In this study, we developed and validated low-cost, high-throughput screening techniques, predominantly employing agar plates and liquid culture assays, to effectively differentiate tolerance levels among various algae strains. The methodologies were optimized using the model microalgaChlamydomonas reinhardtiiand its closely related speciesChlamydomonas incertaand the recently discovered extremophilicChlamydomonas pacifica. We systematically evaluated the algae for tolerance to extremes by establishing precise gradients of pH (acidic to alkaline conditions), salinity (0 to 5 M NaCl), temperature (34–42°C), and light intensity (40 to 2977 μE·m⁻²·s⁻¹). Our results demonstrated that these cost-effective, agar plate-based methods effectively distinguished algae strains exhibiting superior tolerance to extreme environmental conditions. These screening techniques not only provided clear differentiation among the closely related strains but also delivered reproducible outcomes suitable for scaling up to larger bioprospecting efforts. Furthermore, the affordability and simplicity of these methods facilitate their implementation in resource-limited laboratories, thereby broadening participation in algae bioprospecting endeavors. This study highlights the potential of low-cost, accessible screening techniques to significantly enhance the discovery and characterization of algal strains with extreme traits. Ultimately, these methods support the development of robust algae-based resources, driving innovation in diverse industrial processes and environmental solutions.Graphical Abstract

Saucedo, Barbara (ORCID:0009000008860839)↗
DOE OSTI2024

Atomically Dispersed Ru-doped Ti 4 O 7 Electrocatalysts for Chlorine Evolution Reaction with a Universal Activity

Chlorine has been supplied by the chlor-alkali process that deploys dimensionally stable anodes (DSAs) for the electrochemical chlorine evolution reaction (ClER). The paramount bottlenecks have been ascribed to an intensive usage of precious elements and inevitable competition with the oxygen evolution reaction. Herein, a unique case of Ru 2+ -O 4 active motifs anchored on Magnéli Ti 4 O 7 (Ru-Ti 4 O 7 ) via a straightforward wet impregnation and mild annealing is reported. The Ru-Ti 4 O 7 performs radically active ClER with minimal deployment of Ru (0.13 wt%), both in 5 m NaCl (pH 2.3) and 0.1 $\tiny{M}$ NaCl (pH 6.5) electrolytes. Scanning electrochemical microscopy demonstrates superior ClER selectivity on Ru-Ti 4 O 7 compared to the DSA. Operando X-ray absorption spectroscopy and density functional theory calculations reveal a universally active ClER (over a wide range of pH and [Cl - ]), through a direct adsorption of Cl - on Ru 2+ -O 4 sites as the most plausible pathway, together with stabilized ClO* at low [Cl - ] and high pH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Effects of pH on potassium sulfite based alkali pretreatment of corn stover under mild conditions

Sulfite salt-based alkali pretreatment is increasingly recognized as an effective method for biomass pretreatment under mild temperature conditions. However, the effects of pH on the pretreatment process are not yet fully understood. In this study, the pretreatment of corn stover using potassium sulfite (KS) combined with aqueous ammonia (AA) at 80 °C was investigated within a pH range of 9–14. Results demonstrated that high pH environment established by combining KS with AA is critical for enhancing sulfonation modifications, effectively removing lignin, facilitating deacetylation, and significantly improving the total sugar yield. For example, when comparing KS alone at pH 9.7, AA alone at pH 13, and KS combined with AA at pH 13, the delignification rates were 13.82 %, 67.71 %, and 71.27 %, respectively; the deacetylation rates were 25.84 %, 81.19 %, and 82.54 %, respectively; and the total sugar yields were 24.85 %, 78.96 %, and 92.12 %, respectively. The X-ray photoelectron spectroscopy (XPS) results confirmed that sulfonation reactions occurred under low-temperature and high pH conditions, leading to enhanced delignification efficiency. Results also showed that the cellulase adsorption, water retention, and the enzymatic digestibility of the pretreated solids increased along with rising pH. Moreover, nuclear magnetic resonance (NMR) analysis revealed that KS-based alkali pretreatment retained more β-O-4 native bonds in the pretreated lignin-rich hydrolysate than alkali pretreatment alone did, providing promising opportunities for the subsequent upgrading of lignin into high-value products.

09 BIOMASS FUELS↗
DOE OSTI2022

Sorption and oxidation of Co(II) at the surface of birnessite: Impacts of aqueous Mn(II)

The sorption of aqueous Mn(II) (1 mM) and Co(II) (50 and 200 μM) onto hexagonal birnessite (0.1 g L –1 ) was studied under anoxic conditions at pH 6.5 and 7.5 in binary and ternary experiments using batch kinetic experiments and XRD, ATR-FTIR, and Co K-edge EXAFS analyses. In the binary systems, sorption of Co(II) was accompanied by partial oxidation to Co(III) yielding a mixture of corner-sharing Co(II) and edge-sharing Co(III) complexes at both pH values, while Mn(II)-birnessite interaction resulted in coordination of Mn(II/III) at layer vacancy sites at pH 6.5, and led to reductive transformation of birnessite into feitknechtite at pH 7.5. In the ternary systems, strong mutual interferences between Co(II) and Mn(II) co-sorbates reduced the rate and extent of sorption relative to the binary experiments. The introduction of Mn(II) aq into the high-Co systems (200 μM) halted the slow sorption of Co(II) that was attributed to the incorporation of Co(III) into layer vacancies, while Co(II) aq prevented Mn(II)-driven transformation of birnessite into feitknechtite at pH 7.5. In the low-Co system (50 μM), reductive transformation of birnessite by Mn(II) aq at pH 7.5 produced Co(II)-substituted feitknechtite, a conversion that was accompanied by reduction of sorbed Co(III) to Co(II) which was partially released to solution. The strong effects of co-sorption are attributed to the similarity in sorption mechanisms of Co(II) and Mn(II), which both sorb as a mixture of di- and trivalent species. Finally, the results of this work demonstrate that aqueous Mn(II) may significantly affect the reactivity of phyllomanganate sorbents towards dissolved Co(II), and therefore impact the speciation and solubility of this trace metal in anoxic and suboxic geochemical environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

pH-Dependent Vibrational Dynamics Drives Excited-State Quenching in the Phycobiliprotein Complex PC645

Phycocyanin 645 (PC645) is a closed-form lightharvesting complex found in the lumen of the photosynthetic membrane of cryptophyte algae. These peripheral antenna complexes contain bilin chromophores that absorb sunlight and transfer excitation energy to the core antenna complexes embedded in the thylakoid membrane. The location of cryptophyte antenna complex on the luminal side of the membrane is unusual. During photosynthetic activity, the pH of the lumen drops, by up to two pH units. There is little known about how this pH-change affects the light-harvesting complexes. In this study, we report multiscale simulations using a computationally efficient density functional tight-binding framework to investigate the spectroscopy and excitation energy transfer in the PC645 complex. Complementary experiments were conducted using both steady-state and time-resolved spectroscopic measurements at low, neutral, and high pH values. Our study shows that (de)protonation of specific bilin pigments, namely, the mesobiliverdins (MBVs), modulates the excitation energies, excitonic couplings, and spectral densities. These changes cause excitation transfer rates to increase by up to a factor of two to three, leading to pH-dependent energy transfer pathways in the complex. Using this model, we calculated the pH-dependent fluorescence quantum yield of the system, obtaining quantitative agreement with the experimental results. These computational simulations, supported by experiments, identify MBVs as a more prominent excitation sink than previously realized, and that this role is tuned by pH.

Maity, Sayan [Constructor Univ., Bremen (Germany);↗