Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Level densities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Backscattering cascade of beam modes off ambient density fluctuations

The effects of a given nonthermal low-frequency density-fluctuation spectrum on the amplification of Langmuir waves by a 'bump-on-tail' beam of electrons are studied. The density-fluctuation spectrum is assumed to contain a uniform distribution of wavelengths ranging from much shorter than the beam mode wavelength to of the same order. This permits multiple large-angle (back) scattering to occur. One-dimensional numerical solutions of the kinetic equations are found which yield criteria for linear saturation of the beam instability of a cascade of backscattering to high wavenumber. The relevant time scales and spectral shapes are also determined in both the stable and unstable regions. Linear damping and Cerenkov emission by a possible nonthermal tail of electrons is taken into account. An application is made to the beam modes observed simultaneously with density fluctuations off the Jovian bow shock. It is shown that the observed level of density fluctuations is sufficient to saturate the unstable Langmuir waves, although nonthermal Landau damping may prevent a cascade to very high wavenumbers.

Russell, D. A.↗
NASA NTRS1977

A first-principles derivation of Doppler noise expected from solar wind density fluctuations

The level of Doppler noise (DN) expected from solar wind (SW) density fluctuations (DF) is derived beginning with the expression for refractive index variations. The calculation takes account of up and downlink paths and of the method actually used to produce the DN values. The usual assumptions that the DF are frozen in, that the large-scale radial variation can be separated from the DF, that the DF power spectrum is a power law with outer scale k sub 0 and that the DF are homogeneous on scales less than 2c delta t, delta t = sample time, are made. The result agrees quite well with previous observations of DN. Corrections for the finite number of points used in the actual algorithm are discussed.

Callahan, P. S.↗
NASA NTRS1982

Interplanetary radio storms. 2: Emission levels and solar wind speed in the range 0.05-0.8 AU

Storms of interplanetary type III radio bursts (IP storms) are commonly observed in the interplanetry medium by the ISEE-3 radio instrument. This instrument has the capability of accurately determining the arrival direction of the radio emission. At each observing frequency, the storm radio sources are tracked as they cross the line-of-sight to the Sun. Usng a simple model, the emission levels are determined at a number of radio frequencies for four separate storms. The IP storm radiation is found to occur in regions of enhanced density at levels of 0.05 to 0.8 AU. The density in these enhancements falls off faster than R(-2). The solar wind speed in the storm region is also measured. The analysis is consistent with steady conditions in the storm region during a few days around the central meridian passage of the storm. The comparison with average in situ density measurements compiled from the HELIOS 1-2 observations favors type III storm burst radio emission at the harmonic of the local plasma frequency.

Bougeret, J. L.↗
NASA NTRS1984

Interplanetary radio storms. II - Emission levels and solar wind speed in the range 0.05-0.8 AU

Storms of interplanetary type III radio bursts (IP storms) are commonly observed in the interplanetary medium by the ISEE-3 radio instrument. This instrument has the capability of accurately determining the arrival direction of the radio emission. At each observing frequency, the storm radio sources are tracked as they cross the line-of-sight to the sun. Using a simple model, the emission levels are determined at a number of radio frequencies for four separate storms. The IP storm radiation is found to occur in regions of enhanced density at levels of 0.05 to 0.8 AU. The density in these enhancements falls off faster than R(-2). The solar wind speed in the storm region is also measured. The analysis is consistent with steady conditions in the storm region during a few days around the III storm burst radio emission at the harmonic of the local plasma frequency.

Bougeret, J.-L.↗
NASA NTRS1974

Column densities of interstellar molecular hydrogen

Equivalent widths of some 50 lines in the 0-0 to 5-0 Lyman bands of H2 are reported in the spectra of 28 stars. Curves of growth are given and column densities for levels from J = 0 to J = 5 are tabulated, with a few values and upper limits for N(6) and N(7), together with values for b, the velocity spread parameter. In three Orion stars and in rho Leo pairs of components are detected, the difference in radial velocity is determined, and column densities are measured or estimated; tentative identifications are made with the components observed by Hobbs (1969) in the Na D-lines. Column densities for HD are given for 13 stars. Upper limits for column densities in the first and second vibrational levels are listed for several stars; the ratio of N(J = 0) in the v double prime = 1 level to that in the ground vibrational level is less than 2.4 x 10 to the minus 8th power in zeta Oph. Values of a rotational excitation temperature for the higher J levels are given for all the stars. Data are presented which show an apparent increase of velocity dispersion with J for a number of stars, as measured both from the curves of growth and from line widths.

Spitzer, L., Jr.↗
NASA NTRS1986

Physical conditions in the cool parts of prominences and spicules - The effects of model atom level truncation on the derived plasma parameters

The effects on calculated lower-level population densities of the truncation of Na and Sr(+) model atoms are determined in the context of the present spectral diagnostic scheme for solar prominences and spicules. It is shown that neglect of the upper atomic levels in Na, in particular, leads to overestimates in electron density and gas pressure by factors of about 2 and about 4, respectively, and to underestimates in the degree of hydrogen ionization and in the line-of-sight thickness of emitting material again by factors of about 2 and about 4, respectively. The implications of the revised emitting region extents, in particular, on the validity of the diagnostic method for these features are discussed.

Landman, D. A.↗
NASA NTRS1992

Recognition and characterization of hierarchical interstellar structure. II - Structure tree statistics

A new method of image analysis is described, in which images partitioned into 'clouds' are represented by simplified skeleton images, called structure trees, that preserve the spatial relations of the component clouds while disregarding information concerning their sizes and shapes. The method can be used to discriminate between images of projected hierarchical (multiply nested) and random three-dimensional simulated collections of clouds constructed on the basis of observed interstellar properties, and even intermediate systems formed by combining random and hierarchical simulations. For a given structure type, the method can distinguish between different subclasses of models with different parameters and reliably estimate their hierarchical parameters: average number of children per parent, scale reduction factor per level of hierarchy, density contrast, and number of resolved levels. An application to a column density image of the Taurus complex constructed from IRAS data is given. Moderately strong evidence for a hierarchical structural component is found, and parameters of the hierarchy, as well as the average volume filling factor and mass efficiency of fragmentation per level of hierarchy, are estimated. The existence of nested structure contradicts models in which large molecular clouds are supposed to fragment, in a single stage, into roughly stellar-mass cores.

Houlahan, Padraig↗
NASA NTRS1992

On the calculation of atomic term populations

The usefulness of calculations on model atomic term systems which can give spectral multiplet intensities is emphasized, in contrast to more detailed level calculations which are not always feasible because of lack of appropriate atomic data. A more general expression for the multiplet radiative transition rate is proposed to facilitate term representations. The differences between term and level representations are discussed quantitatively with respect to a model three-level atom and real examples of the C III and Ne IV ions. It is shown that term representations fail at lower densities when level inverse lifetimes within terms differ by only a few orders of magnitude. In such cases one must resort to other methods; a hybrid calculation is therefore proposed to fill this need and is carried out for the C III ion to demonstrate its feasibility and validity.

Kastner, S. O.↗
DOE OSTI2026

Effects of density turbulence on helicon wave propagation in the core plasmas

Radio frequency wave propagation can be significantly affected by density irregularities, such as filaments in the scrape-off layer or instabilities in the core plasma. In this study, we examine the impact of edge turbulence on helicon wave propagation using the Petra-M simulation tool. To analyze the effect of edge turbulence, we utilize a realistic background plasma derived from XGC simulations, which includes spatial density fluctuations at the edge. This focus is particularly relevant for the DIII-D configuration, characterized by edge density turbulence of the core plasmas in a wide pedestal QH-mode. We focus on helicon wave propagation in the core plasma since the slow mode cannot propagate into the core plasma when the density is higher than the lower hybrid resonance, where a wide pedestal QH-mode occurs. The simulation results indicate that edge density fluctuations have a substantial impact on helicon wave coupling due to scattering in the core. We specifically demonstrate that the toroidal mode number and the level of density fluctuations are significant factors influencing scattering. While we have minimized the excitation of slow modes from the antenna, we still observe mode-converted slow modes resulting from the incoming helicon waves. The insights derived from these simulations will inform upcoming tokamak experiments regarding helicon antenna coupling in long pulse scenarios.

Kim, Eun-Hwa [Princeton Plasma Physics Laboratory ↗
DOE OSTI2026

A Multi-Region SEIR Model Incorporating Inter-County Mobility and Time-Dependent Transmission Dynamics: Application to COVID-19 Disease Outbreak Data in North Carolina.

Classical infectious disease compartmental models typically do not incorporate spatial heterogeneity or mobility. We develop a multi-region susceptible-exposed-infected-recovered (SEIR) model in which disease dynamics are coupled via inter-region mobility and the transmission rate is both region and time dependent. We calibrate the model using rolling averages of daily COVID-19 data in all 100 North Carolina counties. Mobility parameters are prescribed using daily inter-county commuter data. The number of transmission rate parameters is substantially reduced by hypothesizing that the dynamics correlate with county-level population density. Parameter estimation is carried out using several objective functions with error terms at different scales. An additive combination of least squares error at the county-level and the state-level, along with a quadratic transmission rate polynomial, yields the lowest overall error at both spatial scales. The calibrated model is used to simulate regional effects of perturbing disease transmission rates in adjacent counties and to illustrate effects of the state’s mobility infrastructure on disease dynamics and spread for a new disease outbreak.

COVID-19 modeling↗
NASA NTRS1983

Image processing in remote sensing data analysis - The state of the art

Image analysis techniques applicable to remote sensing data and covering image models, feature detection, segmentation and classification, texture analysis, and matching are studied. Model types for characterizing images examined include random-field, mosaic, and facet models. Edge and corner detection as well as global extraction of linear features are discussed. Pixel clustering and classification are covered in addition to the regional approach to segmentation. Autocorrelation, second-order gray level probability density, and the use of primitive element statistics are discussed in relation to texture analysis. Finally, reducing the cost of (sub)imaging matching methods (e.g., pixelwise comparison of gray levels and normalized cross-correlation between two images) as well as improving match sharpness is considered.

Rosenfeld, A.↗
NASA NTRS1994

Missileborne Artificial Vision System (MAVIS)

Several years ago when INTEL and China Lake designed the ETANN chip, analog VLSI appeared to be the only way to do high density neural computing. In the last five years, however, digital parallel processing chips capable of performing neural computation functions have evolved to the point of rough equality with analog chips in system level computational density. The Naval Air Warfare Center, China Lake, has developed a real time, hardware and software system designed to implement and evaluate biologically inspired retinal and cortical models. The hardware is based on the Adaptive Solutions Inc. massively parallel CNAPS system COHO boards. Each COHO board is a standard size 6U VME card featuring 256 fixed point, RISC processors running at 20 MHz in a SIMD configuration. Each COHO board has a companion board built to support a real time VSB interface to an imaging seeker, a NTSC camera, and to other COHO boards. The system is designed to have multiple SIMD machines each performing different corticomorphic functions. The system level software has been developed which allows a high level description of corticomorphic structures to be translated into the native microcode of the CNAPS chips. Corticomorphic structures are those neural structures with a form similar to that of the retina, the lateral geniculate nucleus, or the visual cortex. This real time hardware system is designed to be shrunk into a volume compatible with air launched tactical missiles. Initial versions of the software and hardware have been completed and are in the early stages of integration with a missile seeker.

Andes, David K.↗
NASA NTRS1994

The energetics of Titan's ionosphere

We have developed a comprehensive model to study the dynamics and energetics of the ionosphere of Titan. We solved the one-dimensional, time-dependent, coupled continuity and momentum equations for several ion species, together with single ion and electron energy equations, in order to calculate density, velocity, and temperature profiles. Calculations were carried out for several cases corresponding to different local times and configurations of the Titan-Saturn system. In our model the effects of horizontal magnetic fields were assumed to be negligible, except for their effect on reducing the electron and ion thermal conductivities and inhibiting vertical transport in the subram region. The ionospheric density peak was found to be at an altitude of about 1100 km, in accordance with earlier model calculations. The ionosphere is chemically controlled below an altitude of about 1500 km. Above this level, ion densities differ significantly from their chemical equilibrium values due to strong upward ion velocities. Heat is deposited in a narrow region around the ionospheric peak, resulting in temperature profiles increasing sharply and reaching nearly constant values of 800-1000 deg K for electrons and 300 deg K for ions in the topside, assuming conditions appropriate for the wake region. In the subram region magnetic correction factors make the electron heat conductivities negligible, resulting in electron temperatures increasing strongly with altitude and reaching values in the order of 5000 deg K at our upper boundary located at 2200 km. Ion chemical heating is found to play an important role in shaping the ion energy balance in Titan's ionosphere.

Roboz, A.↗
NASA NTRS1985

DLTS analysis of radiation-induced defects in one-MeV electron irradiated germanium and Alsub0.17Gasub0.83As solar cells

The radiation-induced deep-level defects in one-MeV electron-irradiated germanium and AlxGal-xAs solar cell materials using the deep-level transient spectroscopy (DLTS) and C-V techniques were investigated. Defect and recombination parameters such as defect density and energy levels, capture cross sections and lifetimes for both electron and hole traps were determined. The germanium and AlGaAs p/n junction cells were irradiated by one-MeV electrons. The DLTS, I-V, and C-V measurements were performed on these cells. The results are summarized as follows: (1) for the irradiated germanium samples, the dominant electron trap was due to the E sub - 0.24 eV level with density around 4x10 to the 14th power 1/cu cm, independent of electron fluence, its origin is attributed to the vacancy-donor complex defect formed during the electron irradiation; (2) in the one-MeV electron irradiated Al0.17Ga0.83 as sample, two dominant electron traps with energies of Ec-0.19 and -0.29 eV were observed, the density for both electron traps remained nearly constant, independent of electron fluence. It is shown that one-MeV electron irradiation creates very few or no new deep-level traps in both the germanium and AlxGa1-xAs cells, and are suitable for fabricating the radiation-hard high efficiency multijunction solar cells for space applications.

Li, S. B.↗
DOE OSTI2024

Risk of theft and malicious use of radiation sources in transit

Remote radioactive source applications require frequent transportation of sources from storage locations to remote sites. This introduces risk of theft of a source during the transportation process, with the level of risk proportional to the radioactivity of the source. To that end, theft of smaller sources, such as microcurie-level moisture density gauges, are of minor concern, but larger sources, such as those used for radiography and well logging, present more risk. Radiography sources include 192 Ir, 75 Se, or 60 Co radionuclides with radioactivity amounts at or exceeding IAEA Category 2. Well-logging sources, primarily 241 Am/Be, are used for their neutron-emission properties. 137 Cs is also used in well-logging at lower activities than in radiography but at levels that still present some risk. The vulnerability for malicious use of such sources to cause contamination and associated economic effects is dependent on the elemental chemical and physical properties, especially melting point and bulk modulus. Theft of radiography sources is somewhat common, well-logging sources less so. Theft of sources commonly occurs in concert with theft of the vehicle, with the source subsequently abandoned. There have been some instances where a source appears to have been specifically targeted. There are a variety of security measures and protocols, available and under development, to mitigate the risk of theft and assist in source recovery.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
NASA NTRS2004

Measurement of Initial Conditions at Nozzle Exit of High Speed Jets

The time averaged and unsteady density fields close to the nozzle exit (0.1 less than or = x/D less than or = 2, x: downstream distance, D: jet diameter) of unheated free jets at Mach numbers of 0.95, 1.4, and 1.8 were measured using a molecular Rayleigh scattering based technique. The initial thickness of shear layer and its linear growth rate were determined from time-averaged density survey and a modeling process, which utilized the Crocco-Busemann equation to relate density profiles to velocity profiles. The model also corrected for the smearing effect caused by a relatively long probe length in the measured density data. The calculated shear layer thickness was further verified from a limited hot-wire measurement. Density fluctuations spectra, measured using a two-Photomultiplier-tube technique, were used to determine evolution of turbulent fluctuations in various Strouhal frequency bands. For this purpose spectra were obtained from a large number of points inside the flow; and at every axial station spectral data from all radial positions were integrated. The radially-integrated fluctuation data show an exponential growth with downstream distance and an eventual saturation in all Strouhal frequency bands. The initial level of density fluctuations was calculated by extrapolation to nozzle exit.

Panda, J.↗
NASA NTRS1981

Electronic properties of deep-level defects in proton irradiated AlGaAs-GaAs solar cells

Deep level transient spectroscopy and capacitance voltage techniques as well as analysis of the forward current voltage (I-V) characteristics and SEM-EIC data were carried out for proton irradiated GaAs solar cells over a wide range of proton energies and proton fluences. Defect and recombination parameters such as defect energy levels and density, carrier capture cross sections and lifetimes as well as diffusion lengths in the undoped n-GaAs LPE layers were determined. Good correlation between these defect parameters and solar cell performance parameters was obtained for GaAs solar cells irradiated by 200 and 290 KeV protons. It was found that 200 to 290 KeV protons will produce the most defects and damages to the GaAs solar cell structure used. The influence of the low temperature (200 to 400 C) periodic thermal annealing on the deep level defects and the performance of the 200 KeV proton irradiated cells is discussed.

Li, S. S.↗
NASA NTRS2023

Structured Type III Radio Bursts Observed in Interplanetary Space

Context . The last few decades have seen numerous studies dedicated to fine structures of type III radio bursts observed in the meter–decameter wavelengths. Most of the explanations of the structured radio emission involve the propagation of electron beams through the strongly inhomogeneous plasma in the low corona. To date, only a few type III bursts with fine structures, observed at hecto-kilometric wavelengths, have been reported. Aims . We report here the existence of numerous structured type III radio bursts observed during the STEREO era by all three WAVES instruments on board STEREO A, B, and Wind. The aim of the study is to report and classify structured type III bursts, and to present the characteristics of their fine structures. The final goal is to try to understand the physical mechanism responsible for the generation of structured radio emission. Methods . In this study we used data from all available spacecraft, specifically STEREO and Wind. We employed 1D density models to obtain the speed of the source of type III radio emission, the electron beam. We also performed a spectral analysis of the fine structures in order to compare their characteristics with the metric–decametric fine structures. Results . The presented similarities of the type III fine structures in the metric to decametric and interplanetary wavelengths indicate that the physical processes responsible for the generation of structured type III radio bursts could be the same, at heights from the low corona to the interplanetary range. We show that the observed structuring and intermittent nature of the type III bursts can be explained by the variation in the level of density fluctuations, at different distances from the Sun.

Non-thermal radiation mechanisms↗