Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Layered oxides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Effect of the oxide layer on current-induced spin-orbit torques in Hf|CoFeB|MgO and Hf|CoFeB|TaO{sub x} structures

We study the effect of the oxide layer on the current-induced spin-orbit torques (SOTs) in perpendicularly magnetized Hf|CoFeB|MgO (MgO-capped) or Hf|CoFeB|TaO{sub x} (TaO{sub x}-capped) structures. The effective fields corresponding to both the field-like and damping-like current-induced SOTs are characterized using electric transport measurements. Both torques are found to be significantly stronger in MgO-capped structures than those in TaO{sub x}-capped structures. The difference in field-like and damping-like SOTs in the different structures may be attributed to the different Rashba-like Hamiltonian, arising from the difference in the electric potential profiles across the oxide|ferromagnet interfaces in the two cases, as well as possible structural and oxidation differences in the underlying CoFeB and Hf layers. Our results show that the oxide layer in heavy-metal|ferromagnet|oxide trilayer structures has a very significant effect on the generated SOTs for manipulation of ferromagnetic layers. These findings could potentially be used to engineer SOT devices with enhanced current-induced switching efficiency.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reliability of thickness of oxide layer of stainless steels with chromium using cellular automaton model

A cellular automaton (CA) model based on the stochastic approach was proposed to simulate the process of oxidation and corrosion of stainless steels with different contents of chromium in-flowing lead bismuth eutectic (LBE). Chromium is a crucial alloying element added in stainless steels and nickel based alloys which have been proposed to be used in advanced nuclear reactors to improve resistance of the oxidation and corrosion. To verify the reliability of the thickness of the oxide layer by CA model, the influence of the stochastic character on the simulating results was investigated as changing parameter of chromium content of structure material in this study. Ten independent simulations were run for each specific environment. A stable and reasonable results were obtained according to the chi-square of goodness-of-fit test, the chi-square of the thickness of oxide layer for each case were significant smaller than critical chi-square value with a confidence level of 95% ({Chi}{sup 2}{alpha}, v = {Chi}{sup 2} 0.05,9 = 16.92). (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

High-entropy Li-rich layered oxide cathode for Li-ion batteries

High-entropy oxides (HEOs) are emerging as promising cathode materials for Li-ion batteries (LIBs) due to their stable solid-state phase and compositional flexibility. Herein, we investigate the structural and electrochemical properties of a novel non-equimolar high-entropy cathode material, termed high-entropy Li-rich layered oxide (HE-LLO, Li 1.15 Na 0.05 Ni 0.19 Mn 0.56 Fe 0.02 Mg 0.02 Al 0.02 O 1.97 F 0.03 ), in comparison to a pristine Li-rich layered oxide (PR-LLO, Li1.2Ni0.2Mn0.6O2). The incorporation of multiple cations (Na + , Al 3+ , Mg 2+ , Fe 3+ ) and anion (F - ) into HE-LLO introduces compositional diversity, enhancing structural stability through the entropy stabilization effect. Theoretical calculations confirm a significantly higher configurational entropy in HE-LLO compared to PRLLO, supporting its high-entropy nature. Electrochemical evaluations demonstrate that HE-LLO exhibits considerable capacity retention, preserving 76.8 % of its discharge capacity at 0.5C after 200 cycles, compared to only 36.2 % for PR-LLO. Even under high-temperature conditions, HE-LLO outperformed PR-LLO, maintaining 76.1 % of its discharge capacity after 100 cycles at 5C, while PR-LLO retained only 12.4 %. These enhancements are attributed to the improved phase reversibility and higher Li + ion diffusion coefficients of HE-LLO, validated by ex-situ characterizations using a synchrotron X-ray technique, along with density functional theory (DFT) calculations. In conclusion, these findings highlight the promise of non-equimolar HEOs as a novel design strategy for highperformance cathode materials.

25 ENERGY STORAGE↗

Single-Crystallization of O3-Type Layered Oxide Cathode for Na-Ion Battery

The development of high-energy-density Na-ion batteries places significant demands on single-crystal layered oxide cathodes, especially for further high-voltage, solid-state battery scenarios. In the O3-type structure, due to the original sluggish Na ion diffusion kinetics (approximately 1 order of magnitude lower than that of Li-ion), and further hindrance against diffusion kinetics caused by single-crystal architecture, these inherent defects lead to the decline in the electrochemical performance. Herein, we demonstrated that the single crystallization of O3-type NaNi 1/3 Fe 1/3 Mn 1/3 O 2 cathode (d 50 = 5.04 μm) aggravates surface-to-bulk phase inhomogeneity distribution, which is attributed to the uneven Na ions extraction. Moreover, the Na-depletion of the surface/shell region not only aggravates Na ion diffusion resistance but also leads to a higher valence state of transition-metal elements (e.g., Ni/Fe) near the surface of the single-crystal particle, which further compromises the cathode-electrolyte interface stability. Furthermore, not limited to revealing the challenges, tuning the particle size and moderating quasi-single-crystal strategies have been proven to effectively mitigate the negative uneven distributions of Na ions, phases, and valence/oxidative states, resulting in efficient modification for single crystallization of Na-layered oxide cathodes.

36 MATERIALS SCIENCE↗

Modified Coprecipitation Synthesis of Mesostructure-Controlled Li-Rich Layered Oxides for Minimizing Voltage Degradation

In this work, modified carbonate coprecipitation synthesis without addition of chelating agent is introduced to obtain mesostructure-controlled Li-rich layered oxides. The designed mesostructure for target material Li 1.2 Ni 0.2 Mn 0.6 O 2 has uniformly dispersed spherical secondary particles with size around 3 μm. These micrometer-sized particles consist of self-assembled crystallites with size of ~150 nm. This unique design not only decreases the surface area compared with the sample with dispersive particles, but also increases overall structural mechanical stability compared with the sample with larger dense secondary particles as observed by transmission X-ray microscope. As a result, the voltage decay and capacity loss during long-term cycling have been minimized to a large extent. Our findings clearly demonstrate that mesostructure design of Li-rich layered oxides play a key role in optimizing this class of cathode materials. Surprisingly, the voltage fading issue can be partially mitigated by such an approach.

25 ENERGY STORAGE↗

Effects of Transition-Metal Mixing on Na Ordering and Kinetics in Layered P2 Oxides

Layered P2 oxides are promising cathode materials for rechargeable sodium-ion batteries. In this work, we systematically investigate the effects of transition-metal (TM) mixing on Na ordering and kinetics in the Na x Co 1-y Mn y O 2 model system using density-functional-theory (DFT) calculations. The DFT-predicted 0-K stability diagrams indicate that Co-Mn mixing reduces the energetic differences between Na orderings, which may account for the reduction of the number of phase transformations observed during the cycling of mixed-TM P2 layered oxides compared to a single TM. Using ab initio molecular-dynamics simulations and nudged elastic-band calculations, we show that the TM composition at the Na(1) (face-sharing) site has a strong influence on the Na site energies, which in turn impacts the kinetics of Na diffusion towards the end of the charge. Furthermore, by employing a site-percolation model, we establish theoretical upper and lower bounds for TM concentrations based on their effect on Na(1) site energies, providing a framework to rationally tune mixed-TM compositions for optimal Na diffusion.

25 ENERGY STORAGE↗

Toward Long-Life, Ultrahigh-Nickel Layered Oxide Cathodes for Lithium-Ion Batteries: Optimizing the Interphase Chemistry with a Dual-Functional Polymer

Boosting the Ni content in LiMO 2 (M = Ni, Co, Mn, etc.) layered oxides is a promising way to establish high-energydensity, low-cost cathodes, but the poor cathode surface stability is a daunting challenge for their practical viability. Herein, by constructing a dual-functional binder framework with a conductive polymer - polyaniline (PANI), the ultrahigh-Ni layered oxide cathode (LiNi 0.94 Co 0.06 O 2 ) exhibits significantly improved cyclability, with a capacity retention greatly increased from 47% to 81% over 1,000 cycles in full cells. It is demonstrated that the acidic species (e.g. HF) in the electrolyte can be efficiently scavenged through a protonation process of PANI, hence the cathode surface reactivity is greatly suppressed and the rock-salt phase propagation into bulk structure is considerably alleviated. Furthermore, the PANI binder system effectively prevents both the cathode-electrolyte interphase (CEI) and anode-electrolyte interphase (AEI) from degrading to a thick “triple-layer” architecture upon extensive cycling, resulting in more robust, thinner CEI and AEI with regulated interphasial chemistry. Moreover, the delocalized π-conjugated electrons along the backbone of PANI facilitate fast electron transfer and promote rate capability even at low temperatures (-20 °C). Finally, this work sheds light on rational binder engineering for developing high-energy-density lithium-ion batteries with acceptable cycle life.

25 ENERGY STORAGE↗

Regulating Anionic Redox via Mg Substitution in Mn-Rich Layered Oxide Cathodes Enabling High Electrochemical Stability for Sodium-Ion Batteries

Here, with the limited resources and high cost of lithium-ion batteries (LIBs) and the ever-increasing market demands, sodium-ion batteries (SIBs) gain much interest due to their economical sustainability, and similar chemistry and manufacturing processes to LIBs. As cathodes play a vital role in determining the energy density of SIBs, Mn-based layered oxides are promising cathodes due to their low cost, environmental friendliness, and high theoretical capacity. However, the main challenge is structural instability upon cycling at high voltage. Herein, Mg is introduced into the P2-type Na 0.62 Ni 0.25 Mn 0.75 O 2 cathode to enhance electrochemical stability. By combining electrochemical testing and material characterizations, it is found that substituting 10 mol% Mg can effectively alleviate the P2–O2 phase transition, Jahn-Teller distortion, and irreversible oxygen redox. Moreover, structural integrity is greatly improved. These lead to enhanced electrochemical performances. With the optimized sample, a remarkable capacity retention of 92% in the half cell after 100 cycles and 95% in the full cell after 170 cycles can be achieved. Altogether, this work provides an alternative way to stabilize P2-type Mn-based layer oxide cathodes, which in turn, put forward the development of this material for the next-generation SIBs.

25 ENERGY STORAGE↗

A study of deformation and strain induced in bulk by the oxide layers formation on a Fe-Cr-Al alloy in high-temperature liquid Pb-Bi eutectic

At elevated temperatures, heavy liquid metals and their alloys are known to create a highly corrosive environment that causes irreversible degradation of most iron-based materials. In this paper, it has been found that an appropriate concentration of oxygen in the liquid alloy can significantly reduce this issue by creating a passivating oxide scale that controls diffusion, especially if Al is present in Fe-based materials (by Al-oxide formation). However, the increase of the temperature and of oxygen content in liquid phase leads to the increase of oxygen diffusion into bulk, and to promotion of the internal Al oxidation. This can cause a strain in bulk near the oxide layer, due either to mismatch between the thermal expansion coefficients of the oxides and bulk material, or to misfit of the crystal lattices (bulk vs. oxides). This work investigates the strain induced into proximal bulk of a Fe-Cr-Al alloy by oxide layers formation in liquid lead-bismuth eutectic utilizing synchrotron X-ray Laue microdiffraction. Finally, it is found that internal oxidation is the most likely cause for the strain in the metal rather than thermal expansion mismatch as a two-layer problem.

36 MATERIALS SCIENCE↗

Insights into Layered Oxide Cathodes for Rechargeable Batteries

Layered intercalation compounds are the dominant cathode materials for rechargeable Li-ion batteries. In this article we summarize in a pedagogical way our work in understanding how the structure’s topology, electronic structure, and chemistry interact to determine its electrochemical performance. We discuss how alkali–alkali interactions within the Li layer influence the voltage profile, the role of the transition metal electronic structure in dictating O3-structural stability, and the mechanism for alkali diffusion. We then briefly delve into emerging, next-generation Li-ion cathodes that move beyond layered intercalation hosts by discussing disordered rocksalt Li-excess structures, a class of materials which may be essential in circumventing impending resource limitations in our era of clean energy technology.

25 ENERGY STORAGE↗

Impact of Dopants on Suppressing Gas Evolution from High-Nickel Layered Oxide Cathodes

Gas release from high-Ni layered-oxide cathodes (LiNi x Mn 1-x-y-z Co y Al z O 2 ; x > 0.8) can jeopardize the overall performance and safety characteristics of the cell. A comprehensive assessment of rational cathode design with common dopants, such as Ni, Co, Al, and Mn, to suppress gas evolution is crucial for battery safety, yet it remains to be conducted. Furthermore, we present an in-situ gas analysis on nine high-Ni cathode materials with online electrochemical mass spectrometry (OEMS). We show that regardless of the dopant, reactive oxygen release from the cathode lattice remains a critical process for gas evolution. A series of comparisons reveals that the intensity and onset point of gas release is strongly dependent on the cathode composition. Notably, Al and Mn are the most effective dopants to suppress gas evolution from the cathode at 4.4 V. We further highlight lattice stability limits, across these nine compositions, between 85 % to 93 % state of charge.

25 ENERGY STORAGE↗

Effects of the Thickness of Niobium Surface Oxide Layers on Field Emission

Field emission on the inner surfaces of niobium superconducting radio frequency cavities is still one of the major obstacles for reaching high accelerating gradients for SRF community. Our previous experimental results* seemed to imply that the threshold of field emission was related to the thickness of Nb surface oxide layers. In this contribution, a more detailed study on the influences of the surface oxide layers on the field emission on Nb surfaces will be reported. By anodization technique, the thickness of the surface pentoxide layer was artificially fabricated from 3 nm up to 460 nm. A home-made scanning field emission microscope was employed to perform the scans on the surfaces. Emitters were characterized using a scanning electron microscope together with an energy dispersive x-ray analyzer. The SFEM experimental results were analyzed in terms of surface morphology and oxide thickness of Nb samples and chemical composition and geographic shape of the emitters. A model based on the classic electromagnetic theory was developed trying to understand the experimental results. Possibly implications for Nb SRF cavity applications from this study will be discussed.

43 PARTICLE ACCELERATORS↗

Morphology, optical, and adsorption properties of copper-oxide layers deposited from complex compound solutions

A technique for synthesizing gas-sensing copper-oxide layers by layer-by-layer deposition onto glass and plastic substrates is considered. Deposition is based on the oxidation of a copper–ammonia complex by hydrogen peroxide. Layers synthesized at various numbers of deposition cycles are studied by atomicforce microscopy and transmission spectroscopy methods (300–1000 nm). The spectral shape indicates the mixed nature of the oxide with predominant copper oxide (I) Cu{sub 2}O with a corresponding band gap of 2.1 eV. The layers have a continuous granular structure. The surface concentration of Brönsted acid adsorption sites with pK{sub a} ≈ 2.5 (OH acid groups), determined by the indicator method, is 560 μmol/m{sup 2} for the initial films, and threefold increases after heat treatment at 80°C for 30 min. The results obtained are interesting for the use of the described technology for fabricating copper-oxide active layers in gas-sensing sensors operating at room temperature.

36 MATERIALS SCIENCE↗

Atomic layer oxidation on graphene sheets for tuning their oxidation levels, electrical conductivities, and band gaps

Graphene sheets that can exhibit electrical conducting and semiconducting properties are highly desirable and have potential applications in fiber communications, photodetectors, solar cells, semiconductors, and broadband modulators. However, there is currently no efficient method that is able to tune the band gap of graphene sheets. This paper adopts an efficient atomic layer oxidation (ALO) technique to cyclically increase the oxidation level of graphene sheets, thus, tuning their electrical conductance, band-gap structure, and photoluminescence (PL) response. The O/C atomic ratio as an increasing function of the ALO cycle number reflects two linear regions: 0.23% per cm 2 per cycle (0–15 cycles) and 0.054% per cm 2 per cycle (15–100 cycles). The excellent correlation coefficients reveal that the ALO process follows a self-limiting route to step-by-step oxidize graphene layers. The interlayer distance of ALO-graphene sheets shows an obvious increase after the ALO treatment, proved by X-ray diffraction. As analyzed by X-ray photon spectroscopy, the hydroxyl or epoxy group acts as a major contributor to the interlayer spacing distance and oxidation extent in the initial ALO stage, as compared to carbonyl and carboxyl groups. The ALO mechanism, based on Langmuir–Hinshelwood and Eley–Rideal models, is proposed to clarify the formation of oxygen functionalities and structural transformation from pristine graphene sheets to oxidized ones during the ALO cycle. With a tunable oxidation level, the electrical resistivity, semiconductor character, and PL response of ALO-graphene samples can be systematically controlled for desired applications. Finally, the ALO approach is capable of offering a straightforward route to tune the oxidation level of graphene sheets or other carbons.

36 MATERIALS SCIENCE↗

Cationic Ordering Coupled to Reconstruction of Basic Building Units during Synthesis of High-Ni Layered Oxides

Metal (M) oxides are one of the most interesting and widely used solids, and many of their properties can be directly correlated to the local structural ordering within basic building units (BBUs). One particular example is the high-Ni transition metal layered oxides, potential cathode materials for Li-ion batteries whose electrochemical activity is largely determined by the cationic ordering in octahedra (e.g., the BBUs in such systems). Yet to be firmly established is how the BBUs are inherited from precursors and subsequently evolve into the desired ordering during synthesis. A multimodal in situ X-ray characterization approach is employed to investigate the synthesis process in preparing LiNi 0.77 Mn 0.13 Co 0.10 O 2 from its hydroxide counterpart, at scales varying from the long-range to local individual octahedral units. Real-time observation corroborated by first-principles calculations reveals a topotactic transformation throughout the entire process, during which the layered framework is retained; however, due to preferential oxidation of Co and Mn over Ni, significant changes happen locally within NiO 6 octahedra. Specifically, oxygen loss and the associated symmetry breaking occur in NiO 6 ; as a consequence, Ni 2+ ions become highly mobile and tend to mix with Li, causing high cationic disordering upon formation of the layered oxides. Only through high-temperature heat treatment, Ni is further oxidized, thereby inducing symmetry reconstruction and, concomitantly, cationic ordering within NiO 6 octahedra. Finally, findings from this study shed light on designing high-Ni layered oxide cathodes and, more broadly, various functional materials through synthetic control of the constituent BBUs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗