SEARCH · Engineering Papers

Results for “Lattice deformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Strain dependence of Auger recombination in 3 μm GaInAsSb/GaSb type-I active regions

We differentiate the effect of strain induced by lattice-mismatched growth from strain induced by mechanical deformation on cubic nonradiative Auger recombination in narrow-gap GaInAsSb/GaSb quantum well (QW) heterostructures. The typical reduction in the Auger coefficient observed with lattice-mismatched growth appears to be due to the concomitant compositional change rather than the addition of strain, with implications for mid-IR semiconductor laser design. We induced a range of internal compressive strain in five samples from -0.90% to -2.07% by varying the composition during the growth and mechanically induced a similar range of internal strain in analogous quantum well membrane samples. We performed time-resolved photoluminescence and differential reflectivity measurements to extract the carrier recombination dynamics, taken at 300 K with carrier densities from 2.7 × 10 18 cm -3 to 1.4 × 10 19 cm -3 . We observed no change with strain in the cubic Auger coefficient of samples that were strained mechanically, but we did observe a trend with strain in samples that were strained by the QW alloy composition. Measured Auger coefficients ranged from 3.0 × 1 0 - 29 cm 6 s -1 to 3.0 × 1 0 - 28 cm 6 s -1 .

36 MATERIALS SCIENCE↗

DOE OSTI2021

Microstructural evolution in Cu-Nb processed via friction consolidation

Immiscible alloys, whether in well-mixed or layered forms, are of increasing interest based on their novel structural and functional properties, such as enhanced thermal stability against grain growth or radiation-induced defect trapping at the interfaces. To address the need for new approaches to tailor microstructures, the microstructural development of an immiscible Cu-Nb alloy processed via friction consolidation of elemental powders is investigated. Friction consolidation is a solid-phase processing technique that imparts severe plastic strain into a deforming volume resulting in elevated temperatures below the melting temperature of the alloy. Two distinct processing pathways were chosen to understand the effect of thermomechanical conditions on the final microstructure. The microstructure was characterized using scanning electron microscopy, scanning transmission electron microscopy, and X-ray diffraction techniques. Path 1 exhibited larger strain, strain rate, and temperature as compared with path 2. In path 1, agglomerated Nb particles were present in the recrystallized ultrafine-grained Cu matrix, while in path 2 extremely fine and dispersed Nb particles were present in a highly deformed Cu matrix. In both pathways, supersaturation of Cu in Nb lattices was noted, but not vice-versa. The asymmetry in mixing is explained based on deformation-based, thermodynamic and kinetic factors. These findings provide a pathway for creation of novel tailored microstructures and improved properties in any number of binary immiscible alloy systems.

Cu-Nb alloys, Microstructural refinement, Friction↗

DOE OSTI2024

Convex optimization of contour deformations

We discuss various formal aspects of contour deformations used to alleviate sign problems; most importantly, relating these contour deformations to a certain convex optimization problem. As a consequence of this connection we describe a general method for proving upper bounds on the average phase achievable by the contour deformation method. Using this method we show that Abelian lattice Yang-Mills in two spacetime dimensions possesses, for many values of the complex coupling, an exponential sign problem that cannot be removed via any contour deformation. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2023

Hidden conformal symmetry from the lattice

We analyze newly expanded and refined data from lattice studies of an SU(3) gauge theory with eight Dirac fermions in the fundamental representation. We focus on the light composite states emerging from these studies, consisting of a set of pseudoscalars and a single light scalar. We first consider the view that this theory is just outside the conformal window. In this case, the pseudoscalars arise from spontaneous breaking of chiral symmetry. Identifying the scalar in this case as an approximate dilaton, we fit the lattice data to a dilaton effective field theory, finding that it yields a good fit even at lowest order. For comparison, we then consider the possibility that the theory is inside the conformal window. The fermion mass provides a deformation, triggering confinement. We employ simple scaling laws to fit the lattice data, and find that it is of lesser quality.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2022

Confinement/deconfinement transition in the D0-brane matrix model — A signature of M-theory?

We study the confinement/deconfinement transition in the D0-brane matrix model (often called the BFSS matrix model) and its one-parameter deformation (the BMN matrix model) numerically by lattice Monte Carlo simulations. Our results confirm general expectations from the dual string/M-theory picture for strong coupling. In particular, we observe the confined phase in the BFSS matrix model, which is a nontrivial consequence of the M-theory picture. We suggest that these models provide us with an ideal framework to study the Schwarzschild black hole, M-theory, and furthermore, the parameter region of the phase transition between type IIA superstring theory and M-theory. A detailed study of M-theory via lattice Monte Carlo simulations of the D0-brane matrix model might be doable with much smaller computational resources than previously expected.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

Understanding the asymmetric orientations and stress states in polycrystalline NiTi SMA by in-situ synchrotron-based high-energy X-ray diffraction

The stress-induced martensite transformations (SIMTs) dramatically affect the recoverable strain and mechanical response of polycrystalline NiTi. An in-depth understanding of the propagation manner and orientation preference of SIMTs is therefore crucial. Here, in this work, we present a unique asymmetric anisotropy of SIMTs and lattice strains induced by Lüders-type deformation in polycrystalline NiTi, achieved through a combination of in-situ synchrotron X-ray diffraction and uniaxial tensile loading and unloading experiments. Our experimental findings reveal that in polycrystalline NiTi under uniaxial deformation, the asymmetry of SIMTs is attributed to the inhomogeneous strain field caused by the Lüders-type mechanism. The asymmetrical SIMT starts with the forward Lüder band and disappears along with the backward Lüder band. The austenite with the favored orientation of $\langle$110$\rangle$ A //loading direction (LD) transformed and recovered back at a higher rate compared to other orientations during both loading and unloading.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Long-lived photoinduced polar states in metal halide perovskites

Ferroic polarization in hybrid perovskites is crucial for enhancing photovoltaic performance and developing potential electronic applications. Controlling ferroic polarization with an optical field enables probing of ferroic polarization without the unwanted interface ionic effects caused by electronic contacts. This study employs ultrafast near-infrared photoexcitation to control dynamic structural transitions in soft single crystalline hybrid Cu (II) halide perovskites, achieving a long-lived polar state (beyond 104 s) at room temperature. We probe reversible long-lived polar domains under near-infrared photoexcitation using in-situ second harmonic generation microscopy. Theoretical calculation informs the polar lattice microstrain likely induced by anisotropic structure deformation in octahedral copper halide under near-infrared photoexcitation. The reversible slow structure deformation is further confirmed by in-situ photo-induced X-ray diffraction measurement. This work provides a material platform for understanding, controlling, and probing polarization under photoexcitation. Our methodology enables the identification of previously undiscovered polar phases in ferroelectric halide perovskites.

Dou, Yixuan↗

DOE OSTI2020

Many-Body Scars as a Group Invariant Sector of Hilbert Space

We present a class of Hamiltonians H for which a sector of the Hilbert space invariant under a Lie group G, which is not a symmetry of H, possesses the essential properties of many-body scar states. These include the absence of thermalization and the “revivals” of special initial states in time evolution. Here, a particular class of examples concerns interacting spin-1/2 fermions on a lattice consisting of N sites (it includes deformations of the Fermi-Hubbard model as special cases), and we show that it contains two families of N + 1 scar states. One of these families, which was found in recent literature, comprises the well-known η-pairing states. We find another family of scar states that is U(N) invariant. Both families and most of the group-invariant scar states produced by our construction, in general, give rise to the off-diagonal long range order, which survives at high temperatures and is insensitive to the details of the dynamics. Such states could be used for reliable quantum information processing because the information is stored nonlocally and thus cannot be easily erased by local perturbations. In contrast, other scar states we find are product states, which could be easily prepared experimentally. The dimension of scar subspace is directly controlled by the choice of group G and can be made exponentially large.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2022

Simultaneous optimization of hatching orientations and lattice density distribution for residual warpage reduction in laser powder bed fusion considering layerwise residual stress stacking

The reduction in the residual warpage generated via fabrication is an emerging issue in metals’ laser powder bed fusion additive manufacturing (AM). One solution from a design for additive manufacturing (DfAM) perspective is to arrange a hatching strategy that utilizes the asymmetry of the residual stress generated from a molten pool. Another approach is to arrange the geometry of the parts, such as forming an inner lattice structure to arrange the effective stiffness. In this study, the simultaneous optimization of the laser hatching orientation and lattice density distribution was conducted to minimize the residual warpage in lattice infill structures and confirm their synergetic effect. The mutual effect of each layer was highlighted when considering the mechanical background of the optimal results because an imbalance in the residual stress caused the warpage of the AM parts between the layers. The proposed methodology was validated via experimental verification using a quasi-2D plate, 3D bracket, and 3D connecting-rod design problems. The residual warpage in the quasi-2D study, measured as the edge’s vertical deformation, was reduced from 23.4% to 39.4% compared with the benchmark design. In the 3D studies, the warpage reductions ranged from 13.1% to 20.7%.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Informed unsupervised machine learning analysis of dislocation microstructure from high-resolution differential aperture X-ray structural microscopy data

This study leverages high-resolution differential-aperture X-ray structural microscopy (DAXM) to probe the local dislocation structure in deformed 304L-stainless steel at small strain, by measuring the lattice rotation and deviatoric elastic strain with a sub-micron resolution. For a single grain in a polycrystalline specimen, the measured lattice rotation field over the measured volume exhibited a multimodal distribution while the deviatoric elastic strain showed a single-mode distribution. An unsupervised Cauchy mixture machine learning model was developed to resolve the multimodal distribution of the lattice rotation. By mapping the lattice rotation data associated with each Cauchy peak in the model back onto the measured volume, we identify contiguous regions of the crystal rotated near the average values corresponding to the peaks of the overall rotation distribution. These regions represent the grain subdivision in the microstructure. Finally, the dislocation density tensor was also computed and its norm was laid over the rotation field to detect the subgrain boundaries. This step provided a validation of the Cauchy mixture model for the analysis of the lattice rotation distribution. The current study highlights the integration of advanced X-ray microscopy techniques with data-driven analysis methods to uncover detailed microstructure scales in deformed crystals.

Machine learning; Lattice rotation; High-energy X-↗

DOE OSTI2024

Ultimate compressive strength and severe plastic deformation of equilibrated single-crystalline copper nanoparticles

Mechanical properties and deformation mechanisms of defect-free copper nanoparticles are investigated by combining experiments with atomistic simulations. The compressive strength of the particles increases with decreasing size and tends to saturate near the theoretical strength in the small-size limit. In this limit, the intrinsic size dependence of the strength is governed by the stochastic nature of dislocation nucleation near the particle surface. The particle deformation process evolves from the initial strain softening to strain hardening as the particle accumulates residual damage. The normalized strength-size relation for Cu is compared with those for Au, Ni, and Pt. The lack of universal behavior among the four FCC metals is discussed. Heavily deformed Cu nanoparticles develop polycrystalline structures and change the lattice orientation from [111] to [110]. The experiments and simulations reveal the twinning mechanism of the lattice rotation leading to the new grain formation.

36 MATERIALS SCIENCE↗

NASA NTRS2019

Water Storage and Transport Processes During Impact Experiments on Nominally Anhydrous Minerals

Water, in the form of structurally bound hydrogen in the crystal lattice of nominally anhydrous minerals (NAMs), strongly influences many important physical processes on terrestrial planets and planetary objects. Water enhances the rates of plastic deformation and controls the degree of partial melting in silicate rocks, which influences the generation of melt and therefore the nature of planetary volcanism. Water has also been experimentally demonstrated to influence the nature of lattice preferred orientation in deformed aggregates, and thus may be important in the interpretation of seismic anisotropy data collected from planetary bodies, such as from the current InSight mission on Mars. Therefore, much attention has been focused on characterizing the distribution and concentration of water in the planets and rocky bodies of our solar system.

Tielke, J.↗

DOE OSTI2024

Ultimate compressive strength and severe plastic deformation of equilibrated single-crystalline copper nanoparticles

36 MATERIALS SCIENCE↗

NASA NTRS1990

Static aeroelastic analysis of composite wing

A static aeroelastic analysis capability that can predict aerodynamic loads for the deformed shape of the composite wing has been developed. The finite element method (FEM) was used for composite plate structural analysis, and the linear vortex lattice method (VLM) was used for steady aerodynamic analysis. The final deformed shape of the wing due to applied forces is determined by iterative manner using FEM and VLM. FEM and VLM analysis are related by a surface spline interpolation procedure. The wing with Gr/Ep composite material has been investigated to see the wing deformation effect. Aerodynamic load change due to wing flexibility has been investigated. Also, the effect of fiber orientation and sweep angle on the deformation pattern and aerodynamic coefficients are examined. For a certain fiber orientation, the deflection and aerodynamic loading of the composite wing is very much reduced. The swept forward wing has more significant effect of wing flexibility on aerodynamic coefficient than the swept back wing does.

Lee, IN↗

DOE OSTI2026

Dirac Fermions and Flat Bands in Phosphorus Carbide Nanotubes: Structural and Quantum Phase Transitions in a Quasi-One-Dimensional Material

Chemically realistic quasi-one-dimensional (1D) materials in which Dirac Fermions and highly degenerate flat bands coexist intrinsically at the Fermi level are exceedingly rare, while representing a highly desirable platform for correlated and topological quantum phenomena. Here, in this work, using specialized symmetry-adapted first-principles calculations we predict a new class of nanomaterials─phosphorus carbide nanotubes (P 2 C 3 NTs)─obtained by rolling monolayer P 2 C 3 , a two-dimensional material shown in a previous letter to host “double Kagome bands”. Both armchair and zigzag P 2 C 3 NTs are stable at room temperature and feature the rare coexistence of Dirac crossings and multiple flat bands at the Fermi level inherited from the underlying honeycomb–Kagome lattice, with the flat bands resilient to elastic deformations. Under large strain, the structure transforms from honeycomb–Kagome to “brick-wall”, accompanied by multiple coupled structural and quantum phase transitions. We also uncover localized edge states, spin splitting from vacancies and dopants, and strain-tunable magnetism. Together, these results establish P 2 C 3 NTs as a chemically specific and mechanically tunable 1D material platform with potential applications in quantum hardware and spintronics.

carbon nanotubes↗

DOE OSTI2025

X-ray thermal diffuse scattering as a texture-robust temperature diagnostic for dynamically compressed solids

We present a model of x-ray thermal diffuse scattering (TDS) from a cubic polycrystal with an arbitrary crystallographic texture, based on the classic approach of Warren [B. E. Warren, Acta Crystallogr. 6, 803 (1953)]. We compare the predictions of our model with femtosecond x-ray diffraction patterns gathered from ambient and dynamically compressed rolled copper foils obtained at the High Energy Density instrument of the European X-Ray Free-Electron Laser facility and find that the texture-aware TDS model yields more accurate results than does the conventional powder model owed to Warren. Nevertheless, we further show: with sufficient angular detector coverage, the TDS signal is largely unchanged by sample orientation and in all cases strongly resembles the signal from a perfectly random powder; shot-to-shot fluctuations in the TDS signal resulting from grain-sampling statistics are at the percent level, in stark contrast to the fluctuations in the Bragg-peak intensities (which are over an order of magnitude greater); and TDS is largely unchanged even following texture evolution caused by compression-induced plastic deformation. We conclude that TDS is robust against texture variation, making it a flexible temperature diagnostic applicable just as well to off-the-shelf commercial foils as to ideal powders.

Crystal lattices↗

DOE OSTI2021

Formation of pyrophosphates across grain boundaries induces the formation of mismatched but oriented interfaces in silver phosphate polypods

The interfaces and their misfit defects determine the materials properties for a wide range of applications, such as electronic devices, photocatalysis, and mechanical engineering, etc. However, current understanding of atomic interfacial structures is limited. Here we discover a special interfacial structure, mismatched but oriented interface via two distinct facets. Transmission and scanning electron microscopy results suggest that, in Ag 3 PO 4 polypods structures, interfaces of {1 0 0} and {1 1 0}, ({1 0 0}/(1 1 0}), {1 0 0}/{1 1 1}, {1 1 0}/{1 1 1}, and {1 0 0}/{1 0 0}, etc., have a certain orientation relationship, corresponding to the energy minima and coincident site lattice of interfacial atoms as demonstrated by molecular dynamics simulations. Density functional theory demonstrates that the formation of pyrophosphate and/or phosphates rotation to bond across the interface compensate the lattice mismatch at the interfaces, as well as deformations of Ag-O bonds. Furthermore, our work opens up a new avenue for a much wider range of interfacial structures, allow for a higher diversity of structures, and shine light on tailoring crystal structures, morphologies, and the resulting properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Seismic Visibility of Eclogite in the Earth’s Upper Mantle—Implications From High Pressure‐Temperature Single‐Crystal Elastic Properties of Omphacite

Abstract Identifying and locating the geochemical and geophysical heterogeneities in the Earth’s interior is one of the most important and challenging tasks for the deep Earth scientists. Subducted oceanic crust metamorphizes into the dense eclogite in the upper mantle and is considered as a major cause of geochemical and geophysical heterogeneities in the deep Earth. In order to detect eclogitic materials inside the Earth, precise measurements of the high pressure‐temperature single‐crystal elasticity of major minerals in eclogite are thus exceedingly important. Omphacite, a Na,Al‐bearing clinopyroxene, constitutes up to 75 vol% of eclogite. In the present study, we performed the first high pressure‐temperature single‐crystal elasticity measurements of omphacite using Brillouin spectroscopy. Utilizing the finite‐strain approach, we obtained the following thermoelastic parameters for omphacite: K S0 ’ = 4.5(1), G 0 ’ = 1.53(5), ∂K S0 /∂ T = −0.029(5) GPa/K, ∂G 0 /∂ T = −0.013(5) GPa/K, with K S0 = 123(3) GPa, G 0 = 74(2) GPa, and ρ 0 = 3.34(1) g/cm 3 . We found that the seismic velocities of undeformed eclogite are similar to pyrolite at the depths of 200–300 and 410–500 km, thus eclogite is seismically invisible at these depths. Combined with the lattice‐preferred orientations of the omphacite in naturally deformed eclogites, we also modeled seismic anisotropy of eclogite at various pressure‐temperature conditions. A 10 km thick subducted eclogitic crust can result in ∼0.2 s shear wave splitting in the Earth’s upper mantle.

Hao, Ming↗