Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LOW DENSITY GAS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Statistical time-dependent model for the interstellar gas

We present models for temperature and ionization structure of low, uniform-density (approximately 0.3 per cu cm) interstellar gas in a galactic disk which is exposed to soft X rays from supernova outbursts occurring randomly in space and time. The structure was calculated by computing the time record of temperature and ionization at a given point by Monte Carlo simulation. The calculation yields probability distribution functions for ionized fraction, temperature, and their various observable moments. These time-dependent models predict a bimodal temperature distribution of the gas that agrees with various observations. Cold regions in the low-density gas may have the appearance of clouds in 21-cm absorption. The time-dependent model, in contrast to the steady-state model, predicts large fluctuations in ionization rate and the existence of cold (approximately 30 K), ionized (ionized fraction equal to about 0.1) regions.

Gerola, H.↗
NASA NTRS1993

DSMC and continuum analyses of low-density nozzle flow

Two different approaches, the direct-simulation Monte Carlo (DSMC) method based on molecular gas dynamics and a finite-volume approximation of the Navier-Stokes equations, which are based on continuum gas dynamics, are employed in the analysis of a low-density gas flow in a small converging-diverging nozzle. The fluid experiences various kinds of flow regimes including continuum, slip, transition, and free-molecular. Results from the two numerical methods are compared with Rothe's experimental dam, in which density and rotational temperature variations along the centerline and at various locations inside a low density nozzle were measured by the electron-beam fluorescence technique. The continuum approach showed good agreement with the experimental data as far as density is concerned. The results from the DSMC method showed good agreement with the experimental data both in the density and the rotational temperature. It is also shown that the simulation parameters, such as the gas/surface interaction model, the energy exchange model between rotational and translational modes, and the viscosity temperature exponent, have substantial effects on the results of the DSMC method.

Chung, Chan-Hong↗
NASA NTRS1982

Origin of regular satellites

The regular satellites of Jupiter and Saturn are generally believed to have accreted within cooling circumplanetary nebulae. Small silicate bodies are lost into the planet by gas drag before ice can condense. Larger silicate protosatellites survive by exerting tidal torques on the gas, clearing low-density 'tunnels' around their orbits. The nebula is thus divided into a series of gas rings depleted in silicates. Cooling eventually allows ice condensation, yielding another generation of icy bodies. Collisional accretion of these objects accounts for stochastic density variations of Saturn's inner satellites. High dynamic pressure may have prevented accretion in the inner part of the Jovian nebula; J5 may be an ablated remnant of a larger body.

Weidenschilling, S. J.↗
DOE OSTI2025

Single-shot femtosecond laser-induced breakdown spectroscopy in low-density gases

Single-shot fs laser-induced breakdown spectroscopy (LIBS) has been used to interrogate low-density gases of H 2 ⁠, CH 4 ⁠, CO 2 ⁠, and H 2 O ranging from 0.5 × 10 15 to 9.1 × 10 15 cm −3 (15–275 mTorr). Strong spectral signatures were observed above the noise baseline for each test gas at all densities considered. Unique molecular signatures were observed for both CH 4 and CO 2 along with atomic features for each gas. The LIBS intensity response with respect to density was determined for each species using Voigt lineshape fitting or numerical integration. Finally, the collection and analysis of LIBS spectra of composite mixtures of CH 4 –CO 2 and CH 4 –H 2 demonstrates that the extraction of individual densities from gas mixtures is feasible at low densities.

Artificial neural networks↗
NASA NTRS1977

The age of the galactic cosmic rays derived from the abundance of Be-10

Satellite measurements of the abundance of the Be-10 isotope in galactic cosmic rays are used to determine the cosmic-ray lifetime for escape. The data are analyzed by employing a technique based on an extensive calibration of a cosmic-ray telescope with the aid of high-energy Be beams accelerated in a bevatron. It is found that the Be-10/Be abundance ratio at 80 MeV/nucleon is 0.028 + or - 0.104. A comparison of this result with calculations based on a homogeneous steady-state model of galactic cosmic-ray confinement and propagation yields an average interstellar density of 0.18 (+0.18, -0.11) atom/cu cm and a corresponding cosmic-ray lifetime of 17 (+24, -8) million years after solar modulation is taken into account. The low average density traversed by the cosmic rays is shown to suggest that the particles may be spending the major part of their existence in regions of very low matter density. The consequences of these results are discussed for models of cosmic-ray propagation in the Galaxy, including such alternatives as propagation in a galactic halo or in regions of interstellar space where the interstellar gas density is very low.

Garcia-Munoz, M.↗
DOE OSTI2021

Magnetic ordering through itinerant ferromagnetism in a metal-organic framework

In this report, the materials that combine magnetic order with other desirable physical attributes could find transformative applications in spintronics, quantum sensing, low-density magnets and gas separations. Among potential multifunctional magnetic materials, metal-organic frameworks, in particular, bear structures that offer intrinsic porosity, vast chemical and structural programmability, and the tunability of electronic properties. Nevertheless, magnetic order within metal-organic frameworks has generally been limited to low temperatures, owing largely to challenges in creating a strong magnetic exchange. Here we employ the phenomenon of itinerant ferromagnetism to realize magnetic ordering at T C = 225 K in a mixed-valence chromium(II/III) triazolate compound, which represents the highest ferromagnetic ordering temperature yet observed in a metal-organic framework. The itinerant ferromagnetism proceeds through a double-exchange mechanism, which results in a barrierless charge transport below the Curie temperature and a large negative magnetoresistance of 23% at 5 K. These observations suggest applications for double-exchange-based coordination solids in the emergent fields of magnetoelectrics and spintronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1986

X-ray studies of galactic and intergalactic gas in the Pegasus I cluster

Einstein Observatory IPC observations of Pegasus I show hot gas in a low density intergalactic medium as well as in a galactic medium within each of the dominant elliptical galaxies, NGC 7619 and NGC 7626. The short central cooling times inferred, of 100 million years or less, suggest that the galaxies contain cooling flows of about 1 solar mass/yr. The intergalactic gas, which is about 5 times less dense than in the least dense of the known Abell clusters, is incapable of stripping the hot gas from the elliptical galaxies or the neutral gas from the spirals. The gas around NGC 7619 appears to be influencing one of the radio lobes of NGC 7626.

Canizares, C. R.↗
NASA NTRS1963

THE COMBINED USE OF LIQUID AND GASEOUS HELIUM TO PROVIDE NEAR ACTUAL SPACE ENVIRONMENT

Because of the extremely low density of the gas in Interplanetary space, the most important remaining mode of external heat transfer Is radiation. Studies of this phenomenon in its multiple ramifications are being made presently and will continue In both theoretical and experimental areas. These experiments should, most desirably, be made under conditions which duplicate outer space; otherwise, errors may be introduced which cannot be estimated and will only be discovered in the actual environment. Many facilities are presently available which will reproduce the space environment only approximately[1,2]. The facility which will be discussed here has as its goal, at least for the phenomena connected with radiation heat transfer, the provision of conditions in space as accurately as they are known. The conditions to be reproduced are: (1) the solar electromagnetic radiation spectrum; (2) the low pressure and density of space (∼10-14 mm Hg); and (3) the black radiation sink of space (4°K).

LIQUID HELIUM↗
DOE OSTI2025

Catastrophic Cooling Instability in Optically Thin Plasmas

The solar corona is the prototypical example of a low-density environment heated to high temperatures by external sources. The plasma cools radiatively, and because it is optically thin to this radiation, it becomes possible to model the density, velocity, and temperature structure of the system by modifying the MHD equations to include an energy source term that approximates the local heating and cooling rates. The solutions can be highly inhomogeneous and even multiphase because the well-known linear instability associated with this source term, thermal instability, leads to a catastrophic heating and cooling of the plasma in the nonlinear regime. Here we show that there is a separate, much simpler linear instability accompanying this source term that can rival thermal instability in dynamical importance. The stability criterion is the isochoric one identified by Parker (1953), and we demonstrate that cooling functions derived from collisional ionization equilibrium are highly prone to violating this criterion. If catastrophic cooling instability can act locally in global simulations, then it is an alternative mechanism for forming condensations, and due to its nonequilibrium character, it may be relevant to explaining a host of phenomena associated with the production of cooler gas in hot, low density plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Striped electron fluid on (111) KTaO 3

A recent study has revealed that the low carrier density electron gas (2DEG) induced at the interface of EuO and (111) KTaO 3 exhibits a broken symmetry phase with a strong in-plane anisotropy of the resistivity. We present a minimal tight-binding model of this (111) 2DEG, including the large spin-orbit coupling from the Ta ions, which reveals a hexagonal Fermi surface with a highly enhanced 2k F electronic susceptibility. We argue that repulsive electronic interactions, together with a ferromagnetic EuO substrate, favor a magnetic stripe instability leading to a partially gapped Fermi surface. Such a stripe state, or its vestigial nematicity, could explain the observed transport anisotropy. We propose a k · p theory for the low energy j = 3/2 states, which captures the key results from our tight-binding study, and further reveals the intertwined dipolar and octupolar modulations underlying this magnetic stripe order. We conclude by speculating on the relation of this stripe order to the superconductivity seen in this material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Integration of Concentrating Solar Power with High Temperature Electrolysis for Hydrogen Production: Preprint

Hydrogen (H2) has been identified as a leading sustainable contender to replace fossil fuels in transportation and electricity generation. H2 production can be achieved by concentrating solar thermal power (CSP) systems collecting thermal energy from the sun to various chemical processes for fuel production. Fuel production via solar thermal chemical processes integrated with CSP uses the full spectrum of sunlight compared with photovoltaic power conversion and stores solar energy directly and efficiently [1]. The solar fuel production can be realized by thermochemical processes (e.g., water splitting for H2 production, carbon dioxide reduction, or methane reforming) or thermal electrochemical methods (e.g., integration with solid oxide electrolysis cell). Technology development for CSP-integrated solar fuel production requires broad technological bases from solar energy collection to chemical energy conversion. H2 generated from renewable sources can be an energy carrier for a carbon-free economy. Integrating CSP with high temperature electrolysis (HTE) using solid oxide electrolysis cells (SOEC) provides a renewable path for H2 generation. The CSP-HTE integration approach provides the benefit of thermal energy storage (TES) for continuous operation, improved capacity, and SOEC life. H2 gas has low energy density for transportation, pipeline networks are expensive, and H2 liquefaction is energy intensive. However, an alternative method for H2 distribution is to use carbon dioxide (CO2) capture and liquid hydrocarbon synthesis to convert solar energy into liquid fuels that are compatible with the existing fossil fuel infrastructure.

concentrating solar thermal power↗
NASA NTRS1986

Abundances of interstellar atoms from ultaviolet absorption lines

The equivalent widths of interstellar absorption lines of Mg II, P II, Cl I and II, Mn II, Fe II, Cu II, and Ni II, obtained in a Copernicus survey of Bohlin et al (1983) have been analyzed to yield column densities along the lines of sight. The measured depletions are clearly correlated with n sub H, the mean hydrogen column density along the line of sight. Depletions also seem to be weakly correlated with various ratios of hydrogen to extinction by dust grains and also variations of extinction with wavelength, although part of these effects are a secondary result of the correlation with n sub H. The apparent coupling of depletion to the mean density are interpreted in terms of an idealized model due to Spitzer (1985), where each element has one value of depletion in the low-density, warm, neutral gas and an enhanced, different value in cold clouds. The difference of apparent depletions for Mg, P, Cl, Mn, and Fe between warm and cold clouds averages 0.44 + or - 0.12 (rms) dex, and, after an allowance for observational errors is made, the scatter of individual depletions from the overall trend predicted by method is only about 0.10 dex. The identification of the observed apparent depletions with actual ones, while very likely, is not entirely secure, because of the possible presence of highly saturated compoents with very narrow profiles and the possible contamination of the results by H II regions.

Jenkins, E. B.↗