Jet noise and shear flow instability seen from an experimenter's viewpoint.
Similarity laws for jet noise and shear flow instability as suggested by experiments
FLOW STABILITY↗
SEARCH · Engineering Papers
Results for “Jet Noise”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Static and wind tunnel near-field/far field jet noise measurements from model scale single-flow baseline and suppressor nozzles. Volume 2: Forward speed effects
A model scale flight effects test was conducted in the 40 by 80 foot wind tunnel to investigate the effect of aircraft forward speed on single flow jet noise characteristics. The models tested included a 15.24 cm baseline round convergent nozzle, a 20-lobe and annular nozzle with and without lined ejector shroud, and a 57-tube nozzle with a lined ejector shroud. Nozzle operating conditions covered jet velocities from 412 to 640 m/s at a total temperature of 844 K. Wind tunnel speeds were varied from near zero to 91.5 m/s. Measurements were analyzed to (1) determine apparent jet noise source location including effects of ambient velocity; (2) verify a technique for extrapolating near field jet noise measurements into the far field; (3) determine flight effects in the near and far field for baseline and suppressor nozzles; and (4) establish the wind tunnel as a means of accurately defining flight effects for model nozzles and full scale engines.
Jaeck, C. L.↗
Effects of initial condition on circular and elliptic jet noise
Noise produced by cold elliptic jets was studied experimentally using a 4 cm air jet in an anechoic chamber by varying the aspect ratio, nozzle exit boundary layer, and Mach number. Elliptic geometry is found to accentuate the sound produced by pairing of the shear layer vortices in the laminar boundary jet. Calculation of the pressure field produced by the pairing of elliptic vortex rings shows that the ratio of sound intensities produced by the pairing of inviscid elliptic vortex filament rings should be equal to their aspect ratio, the minor axis producing greater sound. Tripping the nozzle boundary layer changes the instability of the shear layer and removes the laminar vortices. If the sound produced by pairing and/or breakdown is considered to be the difference between laminar and turbulent jet noise, the pairing mechanism is seen to be very significant in laminar boundary layer jets.
Bridges, J. E.↗
Indicators of the effect of jet noise on the value of real estate
Airport neighbors typically contend that their property should enjoy airport-accelerated appreciation in value but not suffer counterbalancing effects from jet noise. The paper discusses the effect of jet noise on property value as indicated by (1) market value changes, (2) insulation costs, (3) easement costs, and (4) litigation.
Jet aircraft noise↗
Predicting Jet Noise for Full-Scale Low-Boom Aircraft
Supersonic vehicle research addresses the development of tools, technologies, and knowledge to help eliminate technical barriers to practical commercial supersonic flight. While the major focus of this research has been on reducing the ground signature at supersonic cruise, airplanes must also satisfy noise constraints during takeoff and landing at subsonic speeds, and jet noise is the main sound source. We use computational aeroacoustic sim- ulation tools to assess new designs at these lower speeds. We are further scrutinizing both modeling and simulation practices and the use of hybrid Reynolds-averaged Navier Stokes/Large- Eddy Simulations methods and developing new methods to predict jet noise on a full flight configuration.
Stich, Gerrit-Daniel↗
Initial results of a porous plug nozzle for supersonic jet noise suppression
As part of a continuing study of possible methods of jet noise reduction, some tests have been made on a porous plug type noise suppressor. Very little information exists on the aeroacoustic performance of jet nozzles having porous elements designed to eliminate the shock wave in the exhaust stream and by so doing to eliminate the shock associated noise and screech. Some initial results on the aeroacoustic performance of a model porous plug type jet noise suppressor are presented. Included are shadowgraph pictures of the flow exhausting from the porous plug nozzle with the comparable acoustic far-field spectra and cross correlations which illustrate the benefits of the test device.
Maestrello, L.↗
JT150 1/2-scale nozzle jet noise experiment and comparison with prediction
As part of a program to study flight effects on the exhaust noise of a full scale JT15D engine, static half scale model jet noise experiments were conducted. Acoustic data were recorded for microphone angles of 45 deg to 155 deg with jet conditions for the model scale nozzle corresponding closely to those at 55, 73 and 97 percent of corrected rated speed for the full scale engine. These data are useful for determining the relative importance of jet and core noise in the static full scale engine test data and will in turn allow for a proper evaluation of flight effects on the exhaust noise results. The model scale data are also compared with the coaxial jet noise prediction. Above 1000 Hz, the prediction is nominally 0 to 3 dB higher than the data. The arithmetic mean of the differences between the experimental OASPL and the predicted OASPL for all angles for each run ranged from 0 to -3.2 dB. The standard deviation of all the OASPL differences is 2.2 dB. The discrepancies are greatest at low primary jet velocities and appear to be due to inadequacy in the variable jet density exponent incorporated in the prediction procedure.
Groesbeck, D. E.↗
The effects of profiles on supersonic jet noise
The effect of velocity profiles on supersonic jet noise are studied by using stability calculations made for a shock-free coannular jet, with both the inner and outer flows supersonic. The Mach wave emission process is modeled as the noise generated by the large scale turbulent structures or the instability waves in the mixing region. Both the vortex-sheet and the realistic finite thickness shear layer models are considered. The stability calculations were performed for both inverted and normal velocity profiles. Comparisons are made with the results for an equivalent single jet, based on equal thrust, mass flow rate and exit area to that of the coannular jet. The advantages and disadvantages of these velocity profiles as far as noise radiation is concerned are discussed. It is shown that the Rayleigh's model prediction of the merits and demerits of different velocity profiles are in good agreement with the experimental data.
Tiwari, S. N.↗
Applying Machine Learning to Jet Noise Prediction
This presentation summarizes the application of machine learning to jet noise data in an effort to predict the resulting noise from the interaction between a jet and a hard surface. The Aero-Acoustic Propulsion Laboratory at the NASA Glenn Research Center has acquired the noise resulting from the interaction between a jet and metal plate over a range of surface placements (e.g. plate lengths and positions) and a range of jet flow configurations. For each configuration, the noise was measured at 24 observer locations via a microphone array centered around the jet nozzle. An artificial neural network developed with Keras and TensorFlow was trained on the data to predict an 88-band spectrum as a function of surface placement, jet conditions, and observer location. Analysis of the machine learning models provide insight into which experimental parameters contribute more to the noise and which parameters could potentially be removed entirely to simplify future experiments. Preliminary results will be discussed and presented via a live demonstration of the software, which outputs a sound spectrum in real-time with user-inputted jet-surface configurations.
Dowdall, Jonny↗
Jet noise results from static, wind tunnel, and flight tests of conical and mechanical suppressor nozzles
Results of jet noise suppression tests conducted on a Rolls-Royce Viper 601 turbojet engine are reported. Seven exhaust nozzle configurations are tested, including two conical nozzles, two suppressor mixers, and three treated ejector configurations with different ejector inlets. Tests are conducted at the NASA Ames outdoor static test facility and the 40- by 80-ft wind tunnel facility at minimum tunnel flow velocity and normal flow velocities of 230 and 290 ft/sec. Near-field multiple sideline noise levels are projected to the far fields to compare far-field fixed microphone outdoor static noise levels, and wind tunnel near-field noise data are projected to the far field and flight distances to compare with noise levels recorded from an Hs-125 aircraft. Near-field outdoor noise data duplicate the far-field data recorded from fixed microphones within 2 PNdB, and the Douglas mechanical jet noise suppressor/treated ejector exhaust system achieves a noise reduction of 12 EPNdB relative to a conic reference nozzle at equal thrust in flight.
Mckinnon, R. A.↗
An Investigation of a Mixer-Ejector Nozzle for Jet Noise Reduction
An experimental study is conducted assessing the performance of an ejector together with an 8:1 aspect ratio rectangular nozzle with the eventual goal of noise reduction for jet engines. Wall static pressure and Pitot probe surveys are conducted to evaluate the performance of the ejector, and sound pressure level measurements are made to assess the impact on noise radiation. It is found that addition of vortex generating tabs at the lip of the nozzle causes large increases in secondary flow entrainment. The baseline ejector (without tabs) often encounters flow resonance with accompanying tones. The tabs have the additional benefit of eliminating those tones. In most cases tried so far, pockets of high-speed fluid remain unmixed. Since jet noise scales as velocity to the eighth power, such ‘hot spots’ defeat the noise reduction goal. In some cases, there is a reduction in noise amplitudes in the mid-frequency range (5-30 kHz), however, an increase occurs on the low frequency end apparently due to flow unsteadiness. This together with a high frequency noise increase caused by the tabs results in minimal reductions in the overall sound pressure level. The focus of ongoing and future efforts is to achieve sufficient mixing and desirable noise reduction while keeping the hard-ware short and lightweight.
Zaman, K. B. M. Q.↗
Update on Supersonic Jet Noise Research at NASA
An update on jet noise research conducted in the Fundamental Aeronautics and Integrated Systems Research Programs was presented. Highlighted research projects included those focused on the development of prediction tools, diagnostic tools, and noise reduction concepts.
Henderson, Brenda↗
Effect of Initial Condition on Subsonic Jet Noise from Two Rectangular Nozzles
Differences in jet noise data from two small 8:1 aspect ratio nozzles are investigated experimentally. The interiors of the two nozzles are identical but one has a thin-lip at the exit while the has a perpendicular face at the exit (thick-lip). It is found that the thin-lip nozzle is substantially noisier throughout the subsonic Mach number range. As much as 5dB difference in OASPL is noticed around Mj =0.96. Hot-wire measurements are carried out for the characteristics of the exit boundary layer and, overall, the noise difference can be ascribed to differences in the boundary layer state. The boundary layer of the quieter (thick-lip) nozzle goes through transition around M(sub j) =0.25 and at higher M(sub j) it remains "nominally turbulent". In comparison, the boundary layer of the thin-lip nozzle is found to remain "nominally laminar". at high subsonic conditions. The nominally laminar state involves significantly larger turbulence intensities commensurate with the higher radiated noise.
Zaman, K. B. M. Q.↗
Jet noise from coaxial nozzles over a wide range of geometric and flow parameters
Free field pure jet noise data were taken for a large range of coaxial nozzle configurations. The core nozzles were circular (1 to 4 in. diam.) and plug types. The fan to core area ratio varied from 0.7 to 43.5, while the velocity ratio typically varied from 0 to 1. For most cases the two nozzles were coplanar but large axial extensions of either nozzle were also tested. Correlation of the data resulted in a simple procedure for estimating ambient temperature subsonic coaxial jet noise spectra over a wide range of geometric and flow parameters.
Olsen, W.↗
Evidence of the beam pattern concept of subsonic jet noise emission
The methods and results are described of an approach toward positively identifying the apparent location and strength of the sound source in a subsonic jet. The Green's function technique is applied to regenerate the three-dimensional distribution of the acoustic far field from measured data on a two-dimensional plane. The apparent sound-source location is also determined by using geometrical ray acoustics. The results revealed a number of features of the subsonic jet noise mechanisms; they show that the apparent sound source is highly localized within the jet flow and that the spontaneous noise emission from such a compact source volume is in the fashion of a narrow beam with random directions. These observable properties of the sound field offer the basis for a beam pattern concept of subsonic jet noise radiation. A powerful and accurate technique of aerodynamic noise measurement is verified. This technique is expected to have important applications in the development of jet noise reduction technology.
Pao, S. P.↗
Investigation of the effects of a moving acoustic medium on jet noise measurements
Noise from an unheated sonic jet in the presence of an external flow is measured in a free-jet wind tunnel using microphones located both inside and outside the flow. Comparison of the data is made with results of similar studies. The results are also compared with theoretical predictions of the source strength for jet noise in the presence of flow and of the effects of sound propagation through a shear layer.
Cole, J. E., III↗
Development in Source Modeling and Sound Propagation for Jet Noise Predictions
The purpose of the research carried out under this cooperative agreement was to develop tools that could be used to improve upon the current state of the art in the prediction of noise emitted by turbulent exhaust jets. Both the source modeling and sound propagation aspects of the prediction of jet noise by acoustic analogy were examined with a view toward the development of methods which yield improved predictions over a wider range of operating conditions.
Leib, Steward↗
The Role of Instability Waves in Predicting Jet Noise
There has been an ongoing debate about the role of linear instability waves in the prediction of jet noise. Parallel mean flow models, such as the one proposed by Lilley, usually neglect these waves because they cause the solution to become infinite. The resulting solution is then non-causal and can, therefore, be quite different from the true causal solution for the chaotic flows being considered here. The present paper solves the relevant acoustic equations for a non-parallel mean flow by using a vector Green s function approach and assuming the mean flow to be weakly non-parallel, i.e., assuming the spread rate to be small. It demonstrates that linear instability waves must be accounted for in order to construct a proper causal solution to the jet noise problem. . Recent experimental results (e.g., see Tam, Golebiowski, and Seiner,1996) show that the small angle spectra radiated by supersonic jets are quite different from those radiated at larger angles (say, at 90deg) and even exhibit dissimilar frequency scalings (i.e., they scale with Helmholtz number as opposed to Strouhal number). The present solution is (among other things )able to explain this rather puzzling experimental result.
Goldstein, M. E.↗