Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Inverse Theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Guidance of Nonlinear Nonminimum-Phase Dynamic Systems

The research work has advanced the inversion-based guidance theory for: systems with non-hyperbolic internal dynamics; systems with parameter jumps; and systems where a redesign of the output trajectory is desired. A technique to achieve output tracking for nonminimum phase linear systems with non-hyperbolic and near non-hyperbolic internal dynamics was developed. This approach integrated stable inversion techniques, that achieve exact-tracking, with approximation techniques, that modify the internal dynamics to achieve desirable performance. Such modification of the internal dynamics was used (a) to remove non-hyperbolicity which is an obstruction to applying stable inversion techniques and (b) to reduce large preactuation times needed to apply stable inversion for near non-hyperbolic cases. The method was applied to an example helicopter hover control problem with near non-hyperbolic internal dynamics for illustrating the trade-off between exact tracking and reduction of preactuation time. Future work will extend these results to guidance of nonlinear non-hyperbolic systems. The exact output tracking problem for systems with parameter jumps was considered. Necessary and sufficient conditions were derived for the elimination of switching-introduced output transient. While previous works had studied this problem by developing a regulator that maintains exact tracking through parameter jumps (switches), such techniques are, however, only applicable to minimum-phase systems. In contrast, our approach is also applicable to nonminimum-phase systems and leads to bounded but possibly non-causal solutions. In addition, for the case when the reference trajectories are generated by an exosystem, we developed an exact-tracking controller which could be written in a feedback form. As in standard regulator theory, we also obtained a linear map from the states of the exosystem to the desired system state, which was defined via a matrix differential equation.

Devasia, Santosh↗

Chiral extrapolation of pion-pion scattering phase shifts within standard and unitarized Chiral Perturbation Theory

We calculate the pion-pion elastic scattering phase shifts for pion masses from the chiral limit to values of interest for lattice studies. At low energies, we use the standard Chiral Perturbation Theory expressions to one and two loops. In addition, we study the phase shifts' mass dependence in the resonance region by means of dispersion theory in the form of unitarized Chiral Perturbation Theory and the inverse amplitude method. We pay particular attention to the case when resonances are close to threshold, illustrating the different behavior between scalar and vector resonances. We also provide the estimation of uncertainties, which are dominated by those of the O(p{sup 6}) chiral parameters.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Stationary Distribution and Perturbation Bounds for a Stochastic Inventory Model

In this paper, we use the theory of generalized inverses to compute the stationary distribution of the (s, S) inventory model directly from the transition matrix of the underlying Markov chain and to provide perturbation bounds. Indeed, approximations are employed to build a tractable model, and statistical methods are used to estimate the unknown parameters and distributions. Hence, the system is subject to perturbations that may cause deviation in the characteristics. The proposed perturbation bound provides a means to estimate the impact of the perturbations on the performance measures of the considered inventory system.

97 MATHEMATICS AND COMPUTING↗

Micromechanical Design of Carbon Nanotube Ribbon Reinforced Polymer Composite Materials

Lightweight materials are an important component of the design of aerospace structures. Carbon nanotube materials have been considered for this purpose due to the strength and stiffness of individual nanotubes, and the commercial availability of bulk formats such as fibers. These fibers can have a ribbon cross section which results in a different design space for their composites relative to traditional reinforcements which have a round cross section. This work applies brick-and-mortar micromechanical models and classical lamination theory with an inverse approach to investigate the design space of these composites. Using this approach, the influences of fiber geometry and axial and transverse mechanical properties are mapped. Finally, a sensitivity study is performed and the relative impacts of ±10% variations in the constituent material and geometric properties are ranked. Lamina axial moduli were found to range from a maximum of 3x to 1x minimum relative to a target quasi-isotropic laminate modulus depending on the anisotropy and shear modulus of the lamina. The fiber targets depended strongly on the fiber volume fraction in the lamina and the fiber axial modulus target was found to range from 4.8x to 3.2x the quasi-isotropic laminate target. The sensitivity analysis found that the largest driver of performance was the volume fraction, followed by the fiber axial modulus. While bio-based brick-and-mortar composites, such as nacre, can benefit from reinforcement aspect ratios above 10, for carbon nanotube ribbon (or carbon fiber)/polymer composites the sensitivity study indicated that the optimal cross-sectional aspect ratio was relatively smaller, potentially less than three.

Micromechanics↗

Understanding the Binding of Aromatic Hydrocarbons on Rutile TiO2(110)

The adsorption of cyclohexane, benzene, and alkyl-substituted benzene derivatives is studied on rutile TiO2(110) by a combination of molecular beam dosing, temperature programmed desorption, and density functional theory (DFT). An inversion analysis is used to extract the coverage dependent desorption energies from TiO2(110). The values of the suitable prefactors are derived from simple statistical mechanical models assuming different limits in the adsorbate mobility on the surface. The prefactor values determined using the vibrational frequencies from DFT calculations corroborate this analysis and show that the adsorbates are mobile in 1- or 2-dimensions on corrugated TiO2(110) surface. The adsorption of benzene derivatives is found to be dominated by the dative Lewis acid-base interactions of the p system with the surface Ti ions. While the desorption energy generally increases with increasing the length and the number of substituents, the difference between the desorption energies decreases as the number and length of substituents is increased. This is a consequence of the destabilization of the optimum bonding configuration of the benzene ring and the alkyl groups with their increasing length and number. The absolute saturation coverages of uncompressed layers correspond approximately to one molecule per two Ti5c sites and decrease slightly with increasing molecule size in a good agreement with van der Waals sizes of the molecules.

Chen, Long↗

A Comparison of Exact and Model Exchange–Correlation Potentials for Molecules

Accurate exchange–correlation (XC) potentials for three-dimensional systems–via solution of the inverse density functional theory (DFT) problem–are now available to test the quality of DFT approximations. Herein, the exact XC potential for seven molecules–dihydrogen at four different bond-lengths, lithium hydride, water, and ortho-benzyne–are computed from full configuration interaction reference densities. These are compared to model XC potentials from nonlocal (B3LYP, HSE06, SCAN0, and M08-HX) and semilocal/local (SCAN, PBE, and PW92) XC functionals. Whereas for most systems, relative errors in the ground-state densities are O(10 –3 –10 –2 ) , the model XC potentials have much higher errors of O(10 –1 –10 0 ) . Among the model XC functionals, SCAN0 offers the best agreement with the exact XC potential, underlining the significance of satisfying exact conditions as well as including nonlocal effects in XC functionals. This work indicates that tests against the exact XC potential will provide a promising new direction for building more accurate XC functionals for DFT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Control of space stations

A study is made to develop controllers for the NASA-JSC Triangular Space Station and evaluate their performances to make recommendations for structural design and/or control alternatives. The control system design assumes the rigid body of the Space Station and developes the lumped parameter control system by using the Inverse Optimal Control Theory. In order to evaluate the performance of the control system, a Parameter Estimation algorithm is being developed which will be used in modeling an equivalent but simpler Space Station model. Finally, a scaled version of the Space Station is being built for the purpose of physical experiments to evaluate the control system performance.

Lee, K. Y.↗

Guidance of Nonlinear Nonminimum-Phase Dynamic Systems

The first two years research work has advanced the inversion-based guidance theory for: (1) systems with non-hyperbolic internal dynamics; (2) systems with parameter jumps; (3) systems where a redesign of the output trajectory is desired; and (4) the generation of recovery guidance maneuvers.

Devasia, Santosh↗

Approximated Stable Inversion for Nonlinear Systems with Nonhyperbolic Internal Dynamics

A technique to achieve output tracking for nonminimum phase nonlinear systems with non- hyperbolic internal dynamics is presented. The present paper integrates stable inversion techniques (that achieve exact-tracking) with approximation techniques (that modify the internal dynamics) to circumvent the nonhyperbolicity of the internal dynamics - this nonhyperbolicity is an obstruction to applying presently available stable inversion techniques. The theory is developed for nonlinear systems and the method is applied to a two-cart with inverted-pendulum example.

Devasia, Santosh↗

Accelerated heavy particles and the lens. VII: The cataractogenic potential of 450 MeV/amu iron ions

PURPOSE. To determine the cataractogenic potential dose of high velocity iron ions as a fixation of dose administered singly or fractionated. The dose is critical to risk assessment and to theories of radiation action and cataractogenesis. METHODS. Twenty-eight-day-old rats were examined by slit-lamp biomicroscopy on a weekly-bi-weekly basis for more than 2 yr after radiation exposure. For the acute exposure study doses of 1, 2, 5, 25, and 50 cGy were evaluated. The fractionated regimens involved total doses of 2, 25, and 50 cGy. The reference radiation consisted of 50, 100, 200, or 700 cGy of 250 kilovolt (peak) x-rays. RESULTS. In accordance with previous findings in the rat using 570 MeV/amu 40Ar ions, the relative biologic effectiveness increased rapidly with decreasing dose, reaching values as high as 100. Unlike 40Ar ions, fractionation of the 56Fe doses did not produce a consistent enhancement at any of the doses examined. CONCLUSIONS. The data support the previous findings of a high cataractogenic potential for high linear energy transfer (LET) radiation. The effectiveness for the production of cataracts increases with decreasing dose relative to x-rays and is independent of dose protraction. Although the present study did not reveal a consistent enhancement of effect when the ions were applied in fractions, the results are consistent with at least one theory of the inverse dose-rate effect observed for high-LET radiation.

NASA Discipline Number 04-10↗

Inverse design of axisymmetric flow passages using compressible viscous flow theory

A study reported by Yang and Hudson (1971) was extended by Nelson (1971), who presented a method of inverse design for axisymmetric diffusers. The diffusers obtained with the aid of this method were found to function well under certain conditions, while, for other cases, a modification of the analytical design procedure was required. An outline is provided of the method of inverse solution in simple axisymmetric internal flow passages. Attention is given to governing equations, the method of solution, and examples which illustrate the feasibility of the design procedure. The discussed method, which is based on viscous compressible flow theory, has some limitations. However, it is expected to yield good designs in many practical cases in which the existing design must be modified.

Ntone, F.↗

Research on inverse, hybrid and optimization problems in engineering sciences with emphasis on turbomachine aerodynamics: Review of Chinese advances

Advances in inverse design and optimization theory in engineering fields in China are presented. Two original approaches, the image-space approach and the variational approach, are discussed in terms of turbomachine aerodynamic inverse design. Other areas of research in turbomachine aerodynamic inverse design include the improved mean-streamline (stream surface) method and optimization theory based on optimal control. Among the additional engineering fields discussed are the following: the inverse problem of heat conduction, free-surface flow, variational cogeneration of optimal grid and flow field, and optimal meshing theory of gears.

Liu, Gao-Lian↗

Geometry of conformal manifolds and the inversion formula

Families of conformal field theories are naturally endowed with a Riemannian geometry which is locally encoded by correlation functions of exactly marginal operators. We show that the curvature of such conformal manifolds can be computed using Euclidean and Lorentzian inversion formulae, which combine the operator content of the conformal field theory into an analytic function. Analogously, operators of fixed dimension define bundles over the conformal manifold whose curvatures can also be computed using inversion formulae. These results relate curvatures to integrated four-point correlation functions which are sensitive only to the behavior of the theory at separated points. We apply these inversion formulae to derive convergent sum rules expressing the curvature in terms of the spectrum of local operators and their three-point function coefficients. We further show that the curvature can smoothly diverge only if a conserved current appears in the spectrum, or if the theory develops a continuum. We verify our results explicitly in 2d examples. In particular, for 2d (2,2) superconformal field theories we derive a lower bound on the scalar curvature, which is saturated by free theories when the central charge is a multiple of three.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The development of Gibbs's dyadic and implications for the gradient of a vector field

In this paper, we review the history of the dyadic as developed by Gibbs. This mathematical construct appeared in the second part of Gibbs's pamphlet on vector analysis (published in 1884), and it represented the first known development of a Cartesian theory of tensors. Gibbs made extensive use of the dyadic to express his theory of linear vector functions, that is, functions that acted on vectors and mapped them to new vectors. The dyadic proved to be a capable vehicle in Gibbs's hands, and his theory for dyadics (which we would now call second-order Cartesian tensors) was relatively advanced. The theory detailed notions such as the decomposition of vectors and conditions under which a tensor would have an inverse. While Gibbs's theory for linear operators expressed by dyadics was robust, it did not seem to garner the attention that the more conventional vector analysis (published in the first half of his pamphlet in 1881) did. Perhaps in part because of the general unfamiliarity with the dyadic, two distinct and conflicting definitions of the gradient of a vector field have arisen in the literature. The details of these differences in notation, possible reasons for the difference, and a potential resolution are proposed.

97 MATHEMATICS AND COMPUTING↗

Program manual for the Eppler airfoil inversion program

A computer program is described for calculating the profile of an airfoil as well as the boundary layer momentum thickness and energy form parameter. The theory underlying the airfoil inversion technique developed by Eppler is discussed.

Thomson, W. G.↗

Optical activity in media with noncoplanar magnetization distribution

Natural optical activity in magnetic media for which the exchange interaction dominates is studied theoretically. It is shown using a phenomenological theory that the optical activity effect can be observed in a medium with a nonuniform noncoplanar magnetization distribution without an inversion center. A microscopic theory of the optical activity is constructed for a medium with a helicoidal magnetic structure.

36 MATERIALS SCIENCE↗