Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Instantaneous Frequency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Measuring rainwater content by radar using propagation differential phase shift

While radars measure several quantities closely coupled to the rainfall rate, for frequencies less than 15 GHz, estimates of the rainwater content W are traditionally computed from the radar reflectivity factor Z or the rate of attenuation A--quantities only weakly related to W. Consequently, instantaneous point estimates of W using Z and A are often erroneous. A more natural, alternative parameter for estimating W at these frequencies is the specific polarization propagation differential phase shift phi(sub DP), which is a measure of the change in the difference between phases of vertically (V) and horizontally (H) polarized waves with increasing distance from a radar. It is now well known that W is nearly linearly related to phi(sub DP) divided by (1 - reversed R), where reversed R is the mass-weighted mean axis ratio of the raindrops. Unfortunately, such relations are not widely used in part because measurements of phi(sub DP) are scarce but also because one must determine reversed R. In this work it is shown that this parameter can be estimated using the differential reflectivity (Z(sub H)/Z(sub V) at 3 GHz. An alternative technique is suggested for higher frequencies when the differential reflectivity becomes degraded by attenuation. While theory indicates that it should be possible using phi(sub DP) to estimate W quite accurately, measurement errors increase the uncertainty to +/- 18%-35% depending on reversed R. While far from ideal, it appears that these estimates are likely to be considerably more accurate than those deduced using currently available methods.

Jameson, A. R.↗

Spacelab 2 electron beam wave stimulation - Studies of important parameters

Experimental results from Spacelab 2 experiments on the production of waves in ionospheric plasma by the injection of pulsed electron beams are reported. The wave environments which exist in the orbiter payload bay and at several hundred meters away are compared both during ambient conditions and during electron beam injections. The duty cycle of the beam is found to be one of the most important parameters affecting the amplitude and the harmonic structure of the waves. Maximum amplitudes are produced by 50 percent duty cycles and amplitudes are proportional to instantaneous, rather than average, beam current. The dependence of the harmonic structure on pulsing frequency shows good agreement with theory for whistler mode waves produced by the Cerenkov resonance.

Reeves, G. D.↗

Simplified ISCCP Cloud Regimes for Evaluating Cloudiness in CMIP5 Models

We take advantage of the ISCCP simulator implemented in many CMIP5 models, in order to introduce a credible method to compare model cloud output with corresponding ISCCP observations based on the cloud regime (CR) concept. A novel simplified CR derivation method is introduced that exploits the co-variations of three variables, cloud optical thickness, cloud top pressure and cloud fraction (, pc, CF). Following evaluation criteria established in a previous paper of ours, we assess model cloud simulation performance based on how well the simplified CRs are simulated in terms of similarity of centroids, global values and map correlations of relative frequency-of-occurrence (RFO), and long term total clouds amounts (as opposed to average instantaneous cloud fractions). Mirroring prior results, modeled clouds tend to be too thick optically and not as extensive as in observations. Averaging across models does not help in this or other evaluation aspects, except for cloud geographical locations. A good model for one criterion is usually found to be also a good performer for other criteria despite plenty of exceptions for the criterion of centroid similarity. On the other hand, CRs that include convectively generated high-altitude clouds are not as well simulated here compared to the previous study, but other regimes containing low clouds with high CF improve. Models that have previously performed well distinguish themselves again here, but improvements from other models are also found. The simplified cloud evaluation method thus proves to be more forgiving while still good enough to reveal model weaknesses.

global climate models↗

Efficient detection of a CW signal with a linear frequency drift

An efficient method is presented for the detection of a continuous wave (CW) signal with a frequency drift that is linear in time. Signals of this type occur in transmissions between any two locations that are accelerating relative to one another, e.g., transmissions from the Voyager spacecraft. We assume that both the frequency and the drift are unknown. We also assume that the signal is weak compared to the Gaussian noise. The signal is partitioned into subsequences whose discrete Fourier transforms provide a sequence of instantaneous spectra at equal time intervals. These spectra are then accumulated with a shift that is proportional to time. When the shift is equal to the frequency drift, the signal to noise ratio increases and detection occurs. Here, we show how to compute these accumulations for many shifts in an efficient manner using a variety of Fast Fourier Transformations (FFT). Computing time is proportional to L log L where L is the length of the time series.

Swarztrauber, Paul N.↗

Frequency-Domain Signal Processor For Laser Velocimeter

Dynamic range and accuracy increased. New signal processor for laser-velocimeter (LV) applications overcomes major limitations of present signal processors. System requires no input-signal conditioning other than that provided by amplifiers; it operates in instantaneous mode at signal levels from bursts containing as few as 150 photons down to photon-resolved regime in averaging mode. Digital value of signal-burst frequency sent to external computer system for conversion to value of absolute frequency. Residual turbulence intensity 0.2 percent, with little dependence on signal-to-noise ratio.

Meyers, James F.↗

Universal method for the optimization of HDC coating uniformity on non-planar, non-stationary substrates for inertial confinement fusion targets

The thickness uniformity of chemical vapor deposited (CVD) diamond coatings on non-planar, non-stationary substrates depends on both the intrinsic instantaneous coating thickness distribution (ICTD) of the coating conditions used and, if applicable, on the frequency of substrate reorientation. While important for many CVD diamond applications, the relative impact of the ICTD and substrate reorientation on the coating thickness uniformity has not been studied. In this work, we systematically investigate the effect of these factors for microwave-plasma chemical vapor deposition (MPCVD) of diamond (referred to as high density carbon (HDC) in the inertial confinement fusion (ICF) community) coatings on spherical, rolling substrates. This coating technique is used to fabricate capsules for ICF experiments, which require extreme coating uniformity with <0.3 % thickness variation (so-called Mode 1 or M1) to ensure symmetric compression of imploding targets. To extract the otherwise unobservable reorientation timescale (Δt), Monte Carlo simulations were performed using experimental ICTD data as input. This combined approach confirms scaling relationships between the substrate reorientation timescale as well as coating thickness and coating uniformity, as expected from a 3D random walk. Simulations confirm that M1 is Rayleigh-distributed and scales as (Δt) 1/2 , consistent with the randomization of two angles that determine orientation of a sphere. We also demonstrate that, under the conditions studied, Δt is the dominant factor in determining thickness uniformity while the intrinsic ICTD has minimal impact. Finally, experiments show that Δt can be affected by total batch size under constant agitation conditions due to space constraints that limit the capsule reorientation kinetics. In conclusion, this study highlights the utility of a combined experiment-simulation approach as a general methodology for understanding and improving coating uniformity on non-planar, non-stationary substrates.

Capsule↗

High temperature, low cycle fatigue of copper-base alloys in argon. Part 3: Zirconium-copper; thermal-mechanical strain cycling, hold-time and notch fatigue results

The low-cycle fatigue characteristics of smooth bar and notched bar specimens (hourglass shape) of zirconium-copper, 1/2 Hard, material (R-2 Series) were evaluated at room temperature in axial strain control. Over the fatigue life range from about 300 to 3000 cycles the ratio of fatigue life for smooth bar to fatigue life for notched bar remained constant at a value of about 6.0. Some additional hold-time data for the R-2 alloy tested in argon at 538 C are reported. An analysis of the relaxation data obtained in these hold-time tests is also reported and it is shown that these data yield a fairly consistent correlation in terms of instantaneous stress rate divided by instantaneous stress. Two thermal-mechanical strain cycling tests were also performed using a cyclic frequency of 4.5 cycles per hour and a temperature cycling interval from 260 to 538 C. The fatigue life values in these tests were noticeably lower than that observed in isothermal tests at 538 C.

Conway, J. B.↗

Measurements of the short-term stability of quartz crystal resonators: A window on future developments in crystal oscillators

Recent measurements of the inherent short-term stability of quartz crystal resonators are presented. These measurements show that quartz resonators are much more stable for times less than 1s than the best available commercial quartz oscillators. A simple model appears to explain the noise mechanism in crystal controlled oscillators and points the way to design changes which should permit more than 2 orders of magnitude improvement in their short-term stability. Calculations show that a reference signal at 1 THz, derived from frequency multiplying a 5 MHz source with the above measured crystal stability, should have an instantaneous or fast linewidth of order 1 Hz. These calculations explicitly include the noise contribution of our present multiplier chains and are briefly outlined.

Walls, F. L.↗

High resolution spectral analysis of the Jovian decametric radiation. II - The band-like emissions

Analysis of the bandlike Jovian decametric emission is presented. A model for the active region that accounts for the observed radiation characteristics is described using the measured parameters of the bandlike emission and a model of the Jovian magnetic field. The active region is characterized not only by the fact that an upward-flowing electron stream is caused to radiate in this region, but the stream itself is broken into radiating electron bunches within the active region. Observed undulations of the emission band on the time-frequency plane are interpreted as motions of the active region along a flux tube. The instantaneous location of the active region along the flux tube shows a dependence on the density of the stream entering the active region. The mechanism responsible for density modulation of the stream appears to be common to both the bandlike and simple-S-burst emission types.

Flagg, R. S.↗

Advanced systems requirements for ocean observations via microwave radiometers

A future microwave spectroradiometer operating in several frequency bands will have the capability to step or sweep frequencies on an adaptable or programmable basis. The on-board adaptable frequency shifting can make the systems immune from radio interference. Programmable frequency sweeping with on-board data inversion by high speed computers would provide for instantaneous synoptic measurements or sea surface temperature and salinity, water surface and volume pollution, ice thickness, ocean surface winds, snow depth, and soil moisture. Large structure satellites will allow an order of magnitude improvement in the present radiometric measurement spacial resolution.

Blume, H.-J. C.↗

An Extremely Wide Bandwidth, Low Noise SIS Heterodyne Receiver Design for Millimeter and Submillimeter Observations

Our group has designed a heterodyne submillimeter receiver that offers a very wide IF bandwidth of 12 GHz, while still maintaining a low noise temperature. The 180-300 GHz double-sideband design uses a single SI5 device excited by a full bandwidth, fixed-tuned waveguide probe on a silicon substrate. The IF output frequency (limited by the MMIC low noise IF preamplifier) is 6-18 GHz. providing an instantaneous RF bandwidth of 24 GHz (double-sideband). Intensive simulations predict that the junction will achieve a conversion loss better than 1-2 dB and a mixer noise temperature of less than 20 K across the band (twice the quantum limit). The single sideband receiver noise temperature goal is 70 K. The wide instantaneous bandwidth and low noise will result in an instrument capable of a variety of important astrophysical and environmental observations beyond the capabilities of current instruments. Lab testing of the receiver will begin this summer, and first light on the CSO should be in the Spring of 2003. At the CSO, we plan to use receiver with WASP2, a wideband spectrometer, to search for spectral lines from SCUBA sources. This approach should allow us to rapidly develop a catalog of redshifts for these objects.

Zmuidzinas, J.↗

Informing Algorithms from Ground Validation: The GPM Combined Algorithm

Ground validation (GV) for the Global Precipitation Measurement (GPM) mission encompasses in-situ (e.g., gauge, disdrometer) measurements, ground radar products, and comprehensive datasets from dedicated airborne field campaigns. These datasets are used for direct validation of the precipitation products from GPM as well as to inform assumptions used by the algorithms that produce these products. This presentation will focus on current and potential such uses of GV data in the GPM combined radar-radiometer algorithm.The GPM combined algorithm, by virtue of using data from the Dual-frequency Precipitation Radar (DPR) and GPM Microwave Imager (GMI), is the most well-constrained instantaneous precipitation product from GPM. It also plays an important in role the passive microwave algorithms as a basis for the construction of brightness temperature-precipitation profile databases and is a calibrator for the multi- satellite gridded product IMERG. Since both radar and radiometer data are used as observational inputs, and even with these data the retrievals are underconstrained, microphysical properties of the hydrometeor profile that are relevant over the range of GMI and DPR wavelengths and incidence angles need to be assumed by the algorithm forward models. Such properties include the normalized intercept parameter (N w ) and shape parameter () of the particle size distribution, ice size-density relationship, and particle size-aspect ratio relationships. The sub-beam variability must also be prescribed in order to accurately simulate the observed radar reflectivity profiles without introducing significant biases. The sensitivity of the algorithm to these parameters, along with their mean values and variability, will be discussed. Examples of future directions include refinement with new data (particularly the assumptions related to ice), and seeking relationships between assumptions and observable or environmental data.

Munchak, Joe.↗

Towards the Flexibility of HVDC-Interconnected Systems: A Novel Emergency Freqeuncy Response Model

In this paper, we propose a novel multi-time scale emergency frequency response model by unlocking the flexibility of High Voltage Direct Current (HVDC) systems. Unlike assigning power ramping rates for FACTS to regulate frequency in traditional methods, this paper designs a step-change electromagnetic power frequency response (EPFR) scheme, by leveraging the temporal over/under DC voltage capability of HVDC. Wherein the Kullback-Leibler Divergence is adopted to convexify the modified swing equation after integrating the step-change power. Further, to avoid the complicated differential equations, we equivalently reformulate the duration limits of DC voltage deviation into the HVDC decreasing power ramping rates, which participate in the system primary frequency response. Finally, the new steady-state operation level of HVDC is involved with the secondary frequency response. As a result, an improved three-level algorithm is developed to solve the model, wherein the instant step-change, primary, and secondary frequency response are coordinated together. After applying the proposed frequency response scheme on the test system, the EPFR is validated to effectively provide the most instantaneous supports when faced with bulk power loss due to extreme contingencies, and the resilience is ensured within acceptable expenditures.

Jiang, Sufan↗

Identification of radio emission from the Io flux tube

The identification of a specific Jovian decametric emission with the particular flux tube near the orbit of Io giving rise to it would substantially improve theoretical understandings of the relation of the Io flux tubes with the arc-like structures seen on time vs. frequency plots of decametric emissions observed by the Voyager spacecraft. The present paper shows how the instantaneous Io flux tube may be identified with particular emission features. It is demonstrated that the emissions designated Io caused emission (ICE) may be interpreted as representing sections of arc structures emitted by the interaction of Io with successive flux tubes. The model is capable of accounting for the change of displacement angle of the ICE structures as the sub-observed Jovian longitude changes. The identification permits the mapping of emissions onto the causative flux tubes for Jovian longitudes from 240 to 360 deg.

Riddle, A. C.↗

Variable speed induction motor operation from a 20-kHz power bus

Induction motors are recognized for their simple rugged construction. To date, however, their application to variable speed or servo drives was hampered by limitations on their control. Induction motor drives tend to be complex and to display troublesome low speed characteristics due in part to nonsinusoidal driving voltages. A technique was developed which involves direct synthesis of sinusoidal driving voltages from a high frequency power bus and independent control of frequency and voltages. Separation of frequency and voltage allows independent control of rotor and stator flux, full four quadrant operation, and instantaneous torque control. Recent test results, current status of the technology, and proposed aerospace applications will be discussed.

Hansen, Irving G.↗

Two-component phase-averaged turbulence statistics downstream of a rotating spoked-wheel wake generator

Flow-field measurements of unsteady turbulent flow downstream of a rotating spoked-wheel wake generator were performed in a short-duration light-piston tunnel, and the instantaneous-velocity data were phase averaged based on a signal synchronized with the bar-passing frequency. Mean axial velocities were found to agree well with those obtained from measurements behind a stationary cylinder and to be independent of both Reynolds and bar-passing Strouhal numbers. Reynolds stresses were found to be consistent with related cylinder-wake measurements, but were significantly higher than corresponding measurements obtained in large-scale research turbomachines. Phase-averaged triple velocity correlations were calculated from the digital velocity records, revealing the sign and the magnitude of skewness in the velocity probability density distributions for the two components.

O'Brien, J. E.↗

Instantaneous planar visualization of reacting supersonic flows using silane seeding

A new visualization technique for reacting flows has been developed. This technique, which is suitable for supersonic combustion flows, has been demonstrated on a scramjet combustor model. In this application, gaseous silane (SiH4) was added to the primary hydrogen fuel. When the fuel reacted, so did the (SiH4), producing silica (SiO2) particles in situ. The particles were illuminated with a laser sheet formed from a frequency-doubled Nd:YAG laser (532 nm) beam and the Mie scattering signal was imaged. These planar images of the silica Mie scattering provided instantaneous 'maps' of combustion progress within the turbulent reacting flowfield.

Smith, Michael W.↗

Impact of high-power impulse magnetron sputtering pulse width on the nucleation, crystallization, microstructure, and ferroelectric properties of hafnium oxide thin films

The impact of the high-power impulse magnetron sputtering (HiPIMS) pulse width on the crystallization, microstructure, and ferroelectric properties of undoped HfO 2 films is investigated. HfO 2 films were sputtered from a hafnium metal target in an Ar/O 2 atmosphere, varying the instantaneous power density by changing the HiPIMS pulse width with fixed time-averaged power and pulse frequency. The pulse width is shown to affect the ion-to-neutral ratio in the depositing species with the shortest pulse durations leading to the highest ion fraction. In situ x-ray diffraction measurements during crystallization demonstrate that the HiPIMS pulse width impacts nucleation and phase formation, with an intermediate pulse width of 110 μ s stabilizing the ferroelectric phase over the widest temperature range. Although the pulse width impacts the grain size with the lowest pulse width resulting in the largest grain size, the grain size does not strongly correlate with the phase content or ferroelectric behavior in these films. In conclusion, these results suggest that precise control over the energetics of the depositing species may be beneficial for forming the ferroelectric phase in this material.

36 MATERIALS SCIENCE↗