Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ISOBAR MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

A Multiphase Model for the Intracluster Medium

Constraints on the clustered mass density of the universe derived from the observed population mean intracluster gas fraction of x-ray clusters may be biased by reliance on a single-phase assumption for the thermodynamic structure of the intracluster medium (ICM). We propose a descriptive model for multiphase structure in which a spherically symmetric ICM contains isobaric density perturbations with a radially dependent variance. Fixing the x-ray emission and emission weighted temperature, we explore two independently observable signatures of the model in the parameter space. For bremsstrahlung dominated emission, the central Sunyaev-Zel'dovich (SZ) decrement in the multiphase case is increased over the single-phase case and multiphase x-ray spectra in the range 0.1-20 keV are flatter in the continuum and exhibit stronger low energy emission lines than their single-phase counterpart. We quantify these effects for a fiducial 10e8 K cluster and demonstrate how the combination of SZ and x-ray spectroscopy can be used to identify a preferred location in the plane of the model parameter space. From these parameters the correct value of mean intracluster gas fraction in the multiphase model results, allowing an unbiased estimate of clustered mass density to he recovered.

Nagai, Daisuke↗

Transverse collective flow and midrapidity emission of isotopically identified light charged particles

The transverse flow and relative midrapidity yield of isotopically identified light charged particles (LCPs) has been examined for the 35 MeV/nucleon {sup 70}Zn+{sup 70}Zn, {sup 64}Zn+{sup 64}Zn, and {sup 64}Ni+{sup 64}Ni systems. A large enhancement of the midrapidity yield of the LCPs was observed relative to the yield near the projectile rapidity. In particular, this enhancement was increased for the more neutron-rich LCPs demonstrating a preference for the production of neutron-rich fragments in the midrapidity region. Additionally, the transverse flow of the LCPs was extracted, which provides insight into the average movement of the particles in the midrapidity region. Isotopic and isobaric effects were observed in the transverse flow of the fragments. In both cases, the transverse flow was shown to decrease with an increasing neutron content in the fragments. A clear inverse relationship between the transverse flow and the relative midrapidity yield is shown. The increased relative midrapidity emission produces a decreased transverse flow. The stochastic mean-field model was used for comparison to the experimental data. The results showed that the model was able to reproduce the general isotopic and isobaric trends for the midrapidity emission and transverse flow. The sensitivity of these observables to the density dependence of the symmetry energy was explored. The results indicate that the transverse flow and midrapidity emission of the LCPs are sensitive to the denisty dependence of the symmetry energy.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Direct verification of mixing rules in the hot and dense regime

We perform orbital-free molecular dynamics simulations in the hot and dense regime for two mixtures: equimolar helium-iron and asymmetric deuterium-copper plasmas. For thermodynamic properties, we test two isobaric-isothermal mixing rules whose definitions involve either the equality of total pressures or the equality of the so-defined excess pressures of the components; the pressure and internal energy obtained by direct simulations are in very good agreement with those given by the mixing rule involving the equality of excess pressures. The viscosity of the deuterium-copper mixture is also extracted from a direct simulation and compared to the result given by a mixing rule applied to the viscosities of the pure elements. Finally, for structural properties, the effective charges given by the isobaric-isothermal mixing rule for the average atom model, used in the binary ionic mixture model, yield partial pair distribution functions in good agreement with those obtained by a direct simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ON THE NATURE OF X-RAY SURFACE BRIGHTNESS FLUCTUATIONS IN M87

X-ray images of galaxy clusters and gas-rich elliptical galaxies show a wealth of small-scale features that reflect fluctuations in density and/or temperature of the intracluster medium. In this paper we study these fluctuations in M87/Virgo to establish whether sound waves/shocks, bubbles, or uplifted cold gas dominate the structure. We exploit the strong dependence of the emissivity on density and temperature in different energy bands to distinguish between these processes. Using simulations we demonstrate that our analysis recovers the leading type of fluctuation even in the presence of projection effects and temperature gradients. We confirm the isobaric nature of cool filaments of gas entrained by buoyantly rising bubbles, extending to 7′ to the east and southwest, and the adiabatic nature of the weak shocks at 40″ and 3′ from the center. For features of ∼5–10 kpc, we show that the central 4′ × 4′ region is dominated by cool structures in pressure equilibrium with the ambient hotter gas while up to 30% of the variance in this region can be ascribed to adiabatic fluctuations. The remaining part of the central 14′ × 14′ region, excluding the arms and shocks described above, is dominated by apparently isothermal fluctuations (bubbles) with a possible admixture (at the level of ∼30%) of adiabatic (sound waves) and by isobaric structures. Larger features, of about 30 kpc, show a stronger contribution from isobaric fluctuations. The results broadly agree with a model based on feedback from an active galactic nucleus mediated by bubbles of relativistic plasma.

79 ASTRONOMY AND ASTROPHYSICS↗

Martian topography derived from occultation, radar, spectral, and optical measurements

A new global topographic map of the planet Mars, derived primarily from Mariner 9 data, is presented. Spacecraft radio signal occultation times, remote sensing of infrared and ultraviolet spectra, and earth-based radar measurements are included in the data base. Large-scale topographic relief is seen with definite fluid flow patterns established over much of the surface consistent with earlier analyses. An optical flattening of 0.0059 is obtained with a center-of-mass to center-of-figure offset of approximately 2 km to the south and 1 km toward the Tharsis ridge. Mathematical models approximating the topographic figure and 6.1-mb isobaric surface for Mars are included in this presentation.

Christensen, E. J.↗

Gain curves and hydrodynamic modeling for shock ignition

Ignition of a precompressed thermonuclear fuel by means of a converging shock is now considered as a credible scheme to obtain high gains for inertial fusion energy. This work aims at modeling the successive stages of the fuel time history, from compression to final thermonuclear combustion, in order to provide the gain curves of shock ignition (SI). The leading physical mechanism at work in SI is pressure amplification, at first by spherical convergence, and by collision with the shock reflected at center during the stagnation process. These two effects are analyzed, and ignition conditions are provided as functions of the shock pressure and implosion velocity. Ignition conditions are obtained from a non-isobaric fuel assembly, for which we present a gain model. The corresponding gain curves exhibit a significantly lower ignition threshold and higher target gains than conventional central ignition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of Magmatic Activities on Early Mars Using Igneous Mineral Chemistry in Gale Crater, Mars

One objective of rover missions is exploring the geological context of the surroundings. Over the years, igneous petrology and sedimentology have been disconnected, the first investigating magmatic processes and volcanic activities, and the second seeking environmental conditions in the past and assessing the habitability of the planet. Although different, one is related to the other: igneous rocks are altered and broken down, leading to the formation of sedimentary rocks, which can in turn be used to back out the nature of their magmatic source. The Curiosity rover that landed in the 3.7 Gyr old impact crater Gale is traveling through sedimentary rocks. About fifty float rocks have been observed, and several of them with ambiguous texture and composition have been classified as igneous or sedimentary depending on studies such as Jake_M. The composition of several unambiguous igneous rocks has been analyzed [4- 6] but their heterogeneity at a larger instrumental (measurement size < 2 cm) scale prevents the measurement of a bulk composition as performed on Earth. An original approach avoiding these two last issues is to consider igneous mineral chemistry analyzed within igneous and sedimentary rocks to assess magmatic processes that could have formed them. Most Curiosity data are used to explore ancient environmental conditions, and a significant number of compositional analyses are under-explored for constraining magmatic activities. We will present how we can make use of sedimentary data for investigating igneous processes in the vicinity of Gale crater. Geological Context: We focus on the first 750 martian days, corresponding to measurements in a coherent lacustrine sedimentary unit called Bradbury, because all sedimentary rocks were sourced from the same watershed and appear to have a consistent source with minimal alteration [2-3]. Igneous detrital minerals including feldspar and pyroxene, are observed in sedimentary rocks. Monte Carlo models showed that minimal cation loss is observed based on the composition of all Bradbury rocks, implying negligible weathering [3]. Although clay minerals are detected in few rocks [7], chemical compositions of rocks can be explained by a mixture of primary igneous minerals [3]. Variation of composition within Bradbury rocks can be explained by mineral sorting and one distinct source component. While a common magmatic source is suggested, Bradbury sediments likely come from several volcanic eruptions from a single magmatic chamber [9- 10]. The occurrence of alkali minerals like sanidine and K-rich rocks throughout Bradbury supports the presence of a potassic component, likely trachytic, while plagioclase and a mafic composition suggest a basaltic component [8-9]. Instruments: Mineral chemistry can be estimated by three instruments onboard Curiosity. The CheMin instrument enables detection of mineral assemblages using X-ray diffraction (XRD). Using Rietveld refinement, each mineral is identified according to their 1D XRD pattern [11]. Note that distinction between pyroxene minerals is challenging with the CheMin instrument due to overlapping peaks on XRD patterns and low angular resolution of the instrument [12]. Then, using least square regression and optimization algorithms based on unit-cell parameters, mineral chemistry has been estimated by [11]. Plagioclase composition has been estimated using the NaAlSi3O8- CaAl2Si2O8 system and alkali feldspar is based on the NaAlSi3O8-KAlSi3O8 system (stars in Fig.1). Two mudstone samples (John Klein and Cumberland) and one sandstone sample (Windjana) were analyzed by CheMin at Yellowknife Bay and Kimberley, respectively. Figure 1. Ternary diagrams of feldspars (top) and pyroxene (bottom) quadrilateral. Stars correspond to CheMin composition and the gray patches to ChemCam composition. The colored dots are the composition of feldspar and pyroxene that crystallized during fractional crystallization at FMQ+1 of a melt extracted at distinct melting degree during the adiabatic ascent of a primitive mantle composition, without any water (left panels) and with 0.5 wt.% of water (right panels) at distinct pressure. The ChemCam instrument enables the analysis of the chemical compositions of rocks at hundreds of micrometer scale (350-550 μm) using laser induced breakdown spectroscopy (LIBS), which may provide the composition of minerals when they are larger than the beam spot (>550 μm) [13]. Within >5000 LIBS points, we performed a typical stoichiometric filtering allowing us to distinguish 56 feldspar and 10 pyroxene mineral compositions (grey patches in Fig. 1). Finally, the Alpha Particle X-ray Spectrometer (APXS) analyzes the composition of rocks with a 1.6 cm diameter spot size. Monte Carlo mass balance modeling allowed [3] to decipher a feldspar range varying between An30 and An40 (Fig. 1). Discussion: Although there could be a more complex history and other ways to form the whole compositional range of igneous minerals analyzed within the Bradbury formation, we are presenting here simple magmatic pathways commonly occurring on Earth using the thermodynamical softwares pMELTS and rhyoliteMELTS [14]. The objective is to find reasonable igneous processes that produce minerals that parallel the compositions of feldspar and pyroxene analyzed by the Curiosity rover. As commonly observed for mid-ocean ridge basalts, the adiabatic ascent of a primitive mantle composition [15] partially melting at 2 GPa has been modeled, followed by the extraction of a liquid at distinct degrees of partial melting, which undergoes fractional crystallization at an oxygen fugacity +1 log unit above the fayalite-magnetite-quartz (FMQ) buffer within the crust (0.02-0.4 GPa) with H2O = 0- 0.5 wt. %. These latter conditions correspond to those recorded within igneous clasts from the Noachian martian breccia NWA 7034 and paired and within Gale igneous rocks (colored dots in Fig. 1) [16-17]. To check the reliability of these 2-step models, we also tested fractional crystallization at similar conditions (FMQ+1; P=0.02-0.4 GPa; H2O = 0-0.5 wt. %) of starting compositions corresponding to that of magmas with distinct melting degrees obtained from isobaric experiments at 2 GPa [18]. Mineral compositions obtained from both models are similar. As shown on Fig. 1, the whole range of observed feldspar compositions cannot be reproduced by fractionation of one magma only. Indeed, while alkali feldspar and Na-plagioclase likely crystallized from fractional crystallization of a low-degree melt (here <15%), plagioclase and pyroxene can only be formed by fractional crystallization of a higher degree melt (here >19%). The corresponding liquid descent lines are broadly in agreement with compositions estimated by ChemCam corresponding to float igneous rocks (Fig. 2) [4-6]. Figure 2. Silica versus alkali content. Lines show the liquid lines of descent from magmas with distinct degrees of melting. Gray patches represents the composition of Gale igneous rocks [4-6]. Trachytic to rhyolitic magmas crystallize alkali feldspar, and andesite to dacite magmas likely form plagioclase. Therefore, at least two starting magmas at distinct melting degrees, which could easily come from a single mantle source, are necessary to explain the whole compositional range of feldspar and pyroxene analyzed within Bradbury rocks. Conclusion: Because rocks from the Bradbury formation are likely originating from the same magmatic source with minimal weathering as supported by several studies using different approaches, igneous mineral chemistry analyzed by CheMin and ChemCam allows us to back out reasonable magmatic pathways that could have crystallized them. Fractional crystallization of at least two starting magmas originating from distinct melting degrees of a single mantle source can explain the whole range of feldspar and pyroxene composition. Both alkaline and sub-alkaline liquids can be produced, with compositions corresponding to those of the igneous rocks analyzed by ChemCam within the Bradbury formation, highlighting the complexity of Mars magmatism.

Payre, V.↗

Dilepton production in proton-proton and quasifree proton-neutron reactions at 1.25 GeV

We investigate the pp{yields}ppe{sup +}e{sup -} and quasifree pn{yields}pne{sup +}e{sup -} reactions within an effective Lagrangian model at a laboratory kinetic energy of 1.25 GeV for which experimental data have recently been reported by the HADES Collaboration. The model uses a meson-exchange approximation to describe the initial nucleon-nucleon (NN) scattering. Contributions to the reaction amplitudes are included from the NN bremsstrahlung as well as from the excitation, propagation, and radiative decay of the {Delta}(1230) isobar state. It is found that the HADES data on the e{sup +}e{sup -} invariant mass distribution in the pp{yields}ppe{sup +}e{sup -} reaction are excellently reproduced by our model where the {Delta} isobar term dominates the spectrum. In the case of the quasifree pn{yields}pne{sup +}e{sup -} reaction, a strong sensitivity to the pion electromagnetic form factor is observed which helps to bring the calculated cross sections closer to the data in the higher dilepton mass region.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

QCD Structure of Nuclear Interactions

This dissertation investigated selected processes involving baryons and nuclei in hard scattering reactions. Through these processes, this work explored the constituent structure of baryons and the mechanisms through which the interactions between these constituents ultimately control the selected reactions. First, hard nucleon-nucleon elastic scattering was studied considering the quark exchange (QE) between the nucleons to be the dominant mechanism of interaction in the constituent picture. It was found that an angular asymmetry exhibited by proton-neutron (pn) elastic scattering data is explained within this framework if a quark-diquark picture dominates the nucleon's structure instead of a more traditional SU(6) model. The latter yields an asymmetry around 90 deg center of mass scattering with a sign opposite to what is experimentally observed. The second process is the hard breakup by a photon of a nucleon-nucleon system in light nuclei. Proton-proton (pp) and pn breakup in 3 He, and double Δ-isobars production in deuteron breakup were analyzed in the hard rescattering model (HRM), which in conjunction with the QE mechanism provides a QCD description of the reaction. Cross sections for both channels in 3 He photodisintegration were computed without the need of a fitting parameter. The results presented here for pp breakup show excellent agreement with recent experimental data. In double Δ-isobars production in deuteron breakup, HRM angular distributions for the two double Δ channels were compared to the pn channel and to each other. An important prediction from this study is that the Δ ++ Δ - channel consistently dominates Δ + Δ 0 , which is in contrast with models that unlike the HRM consider a double Δ system in the initial state of the interaction. For such models both channels should have the same strength.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Co2 Profile and Analytical Model for the Pioneer Venus Large Probe Neutral Mass Spectrometer

We present a significantly updated CO2 altitude profile for Venus (64.2–0.9 km) and provide support for a potential deep lower atmospheric haze of particles (≤17 km). We extracted this information by developing a new analytical model for mass spectra obtained by the Pioneer Venus Large Probe (PVLP) Neutral Mass Spectrometer (LNMS). Our model accounts for changes in LNMS configuration and output during descent and enables the disentanglement of isobaric species via a data fitting routine that adjusts for mass-dependent changes in peak shape. The model yields CO2 in units of density (kg m−3), isotope ratios for 13C/12C and 18O/16O, and 14 measures of CO2 density across 55.4–0.9 km, which represents the most complete altitude profile for CO2 at ≤60 km to date. The CO2 density profile is also consistent with the pressure, temperature, and volumetric gas measurements from the PVLP and VeNeRa spacecraft. Nominal and low-noise operations for the LNMS mass analyzer are supported by the behaviors (e.g., ionization yields, fragmentation yields, and peak shapes) of several internal standards (e.g., CH3+, CH4+, 40Ar+, 136Xe2+, and 136Xe+), which were tracked across the descent. Lastly, our review of the CO2 profile and LNMS spectra reveals hitherto unreported partial and rapidly clearing clogs of the inlet in the lower atmosphere, along with several ensuing data spikes at multiple masses. Together, these observations suggest that atmospheric intake was impacted by particles at ≤17 km and that rapid particle degradation at the inlet yielded a temporary influx of mass signals into the LNMS.

Venus↗

VESIcal: A Critical Approach to Volatile Solubility Modelling Using the Open-Source Engine Vesical

Accurate models of H(2)O and CO(2) solubility in silicate melts are vital for understanding volcanic plumbing systems. These models are used to estimate the depths of magma storage regions from melt inclusion volatile contents, investigate the role of volatile exsolution as a driver of volcanic eruptions, and track the degassing path followed by a magma ascending to the surface. However, despite the large increase in the number of experimental constraints over the last two decades, many recent studies still utilize an earlier generation of models which were calibrated on experimental datasets with restricted compositional ranges. This may be because many of the available tools for more recent models require large numbers of input parameters to be hand-typed (e.g., temperature, concentrations of H(2)O, CO(2), and 8–14 oxides), making them difficult to implement on large datasets. Here, we use a new open-source Python3 tool, VESIcal, to critically evaluate the behaviors and sensitivities of different solubility models for a range of melt compositions. Using literature datasets of andesitic-dacitic experimental products and melt inclusions as case studies, we illustrate the importance of evaluating the calibration dataset of each model. Finally, we highlight the limitations of particular data presentation methods, such as isobar diagrams, and provide suggestions for alternatives, and best practices regarding the presentation and archiving of data. This review will aid the selection of the most applicable solubility model for different melt compositions, and identifies areas where additional experimental constraints on volatile solubility are required.

magma↗

Study of DCX reaction on medium nuclei with Monte-Carlo Shell Model

In this work a method is introduced to calculate the DCX reaction in the framework of Monte-Carlo Shell Model (MCSM). To facilitate the use of Zero-temperature formalism of MCSM, the Double-Isobaric-Analog State (DIAS) is derived from the ground state by using isospin shifting operator. The validity of this method is tested by comparing the MCSM results to those of the SU(3) symmetry case. Application of this method to DCX on {sup 56}Fe and {sup 93}Nb is discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Functional uncertainty quantification for isobaric molecular dynamics simulations and defect formation energies

Functional uncertainty quantification (FunUQ) was recently proposed to quantify uncertainties in models and simulations that originate from input functions, as opposed to parameters. This paper extends here FunUQ to quantify uncertainties originating from interatomic potentials in isothermal-isobaric molecular dynamics (MD) simulations and to the calculation of defect formation energies. We derive and verify a computationally inexpensive expression to compute functional derivatives in MD based on perturbation theory. We show that this functional derivative of the quantities of interest (average internal energy, volume, and defect energies in our case) with respect to the interatomic potential can be used to predict those quantities for a different interatomic potential, without re-running the simulation. The codes and scripts to perform FunUQ in MD are freely available for download. In addition, to facilitate reproducibility and to enable use of best practices for the approach, we created Jupyter notebooks to perform FunUQ analysis on MD simulations and made them available for online simulation in nanoHUB. The tool uses cloud computing resources and users can view, edit, and run end-to-end workflows from a standard web-browser without the need to download or install any software.

36 MATERIALS SCIENCE↗

Deep learning of accurate force field of ferroelectric HfO 2

The discovery of ferroelectricity in HfO 2 -based thin films opens up new opportunities for using this silicon-compatible ferroelectric to realize low-power logic circuits and high-density nonvolatile memories. The functional performances of ferroelectrics are intimately related to their dynamic responses to external stimuli such as electric fields at finite temperatures. Molecular dynamics is an ideal technique for investigating dynamical processes on large length and time scales, though its applications to new materials are often hindered by the limited availability and accuracy of classical force fields. Here we present a deep neural network–based interatomic force field of HfO 2 learned from ab initio data using a concurrent learning procedure. The model potential is able to predict structural properties such as elastic constants, equation of states, phonon dispersion relationships, and phase transition barriers of various hafnia polymorphs with accuracy comparable with density functional theory calculations. Here, the validity of this model potential is further confirmed by the reproduction of experimental sequences of temperature-driven ferroelectric-paraelectric phase transitions of HfO 2 with isobaric-isothermal ensemble molecular dynamics simulations. We suggest a general approach to extend the model potential of HfO 2 to related material systems including dopants and defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Flame kinetics at scramjet-engine-relevant conditions: Role of prompt dissociation of weakly-bound radicals

Combustion in high-speed ram-based propulsion engines occurs under distinct thermodynamic conditions of high reactant temperatures (greater than 1000 K) and relatively low pressures (<5 atm). There is a lack of fundamental flame measurements at such conditions that result in adiabatic flame temperatures (T ad ) exceeding 2500 K. In this work, we have measured laminar flame speeds of oxygen-enriched CH 4 /oxidizer mixtures at sub-atmospheric conditions to probe kinetics at high T ad using the isobaric spherically expanding flame approach. Simulations with recent kinetic models revealed increasing differences between data and model predictions with increasing T ad , reaching up to 25 %. Kinetic analyses reveal that at the thermodynamic conditions in these O 2 -enriched flames, i.e., lower pressures and higher T ad , the effects of HCO prompt dissociation are accentuated. In addition to HCO, the prompt dissociations of CH 2 OH and C 2 H 5 are also considered. Here, the prompt dissociations of all three radicals were evaluated and their effects considered in flame speed simulations. Reaction path analysis for the present flames revealed that approximately half of the reaction flux for HCO formation undergoes prompt dissociation to H + CO. Furthermore, these analyses also revealed that the pathways and sensitive reactions are similar between oxygen-enriched fuel/oxidizer mixtures and preheated fuel/air mixtures, if both have similar T ad . Thus, flames of oxygen-enriched mixtures could be a surrogate to probe the flame chemistry of highly preheated mixtures at relatively low pressures that are often encountered in ram-based propulsion engine combustors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoproduction of pion-nucleon pairs on nuclei in the {Delta}(1232)-resonance region

Data from three experiments performed at the linear accelerator in Saclay, the Tomsk synchrotron, and the MAMI accelerator in Mainz and devoted to studying single pion photoproduction on light nuclei that is accompanied by nucleon emission are analyzed. The behavior of respective experimental cross sections, which is inexplicable in the impulse approximation, is interpreted within a model where the formation of an intermediate quasibound isobar-nucleus state is followed by its decay to a final state involving a pion and a nucleon.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Examination of the observability of a chiral magnetically driven charge-separation difference in collisions of the Ru 44 96 + Ru 44 96 and Zr 40 96 + Zr 40 96 isobars at energies available at the BNL Relativistic Heavy Ion Collider

Here, anomalous viscous fluid dynamics model calculations for Ru 44 96 + Ru 44 96 and Zr 40 96 + Zr 40 96 collisions ( s N N = 200 GeV) are used in concert with a charge-sensitive correlator to test its ability to detect and characterize the charge separation difference expected from the chiral magnetic effect (CME) in these isobaric collisions. The tests indicate a larger charge separation for Ru 44 96 + Ru 44 96 than for Zr 40 96 + Zr 40 96 collisions and a discernible CME-driven difference of ~ 10 % in the presence of realistic non-CME backgrounds. Furthermore, they suggest a strategy for evaluating the relative influence of the background correlations, present for each isobar. These results suggest that charge-separation measurements for these isobaric species could serve to further constrain unambiguous identification and characterization of the CME in upcoming measurements at the Relativistic Heavy Ion Collider

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗