Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERSTITIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Formation of shallow boron emitters in crystalline silicon using flash lamp annealing: Role of excess silicon interstitials

Shallow, Boron (B)-doped p{sup +} emitters have been realized using spin-on deposition and Flash Lamp Annealing (FLA) to diffuse B into monocrystalline float zone Silicon (Si). The emitters extend between 50 and 140 nm in depth below the surface, have peak concentrations between 9 × 10{sup 19 }cm{sup –3} and 3 × 10{sup 20 }cm{sup –3}, and exhibit sheet resistances between 70 and 3000 Ω/□. An exceptionally large increase in B diffusion occurs for FLA energy densities exceeding ∼93 J/cm{sup 2} irrespective of 10 or 20 ms pulse duration. The effect is attributed to enhanced diffusion of B caused by Si interstitial injection following a thermally activated reaction between the spin-on diffusant film and the silicon wafer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

The generation and accumulation of interstitial atoms and vacancies in alloys with L1{sub 2} superstructure

The dependences of the point defect concentration (interstitial atoms and vacancies) on the deformation degree were calculated for the L1{sub 2} alloys with the high and low antiphase boundaries (APB) energy in terms of the mathematical model of the work and thermal strengthening of the alloys with the L1{sub 2} structure; the concentration of the point defects generated and annihilated in the process of deformation was estimated. It was found that the main part of the point defects generating during plastic deformation annihilates, the residual density of the deformation point defects does not exceed 10{sup −5}.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Iodine interstitials as a cause of nonradiative recombination in hybrid perovskites

The identification of deep-level defects that act as detrimental nonradiative recombination centers is critical for optimizing the optoelectronic performance of hybrid perovskites. Although extensive studies have been devoted to revealing the nature of deep-level defects in hybrid perovskites, it is still unclear what defects are responsible for the experimentally observed nonradiative recombination rates. Employing first-principles approaches, we quantitatively show that the iodine interstitial is a dominant nonradiative recombination center in methylammonium-lead iodide. Finally, this important insight points to a target for defect engineering in order to further improve the performance of hybrid perovskites.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Shear strain alters the structure and migration mechanism of self-interstitial atoms in copper

Here, we use atomistic modeling to show that externally applied shear strain causes the lowest energy self-interstitial atom (SIA) structure in copper (Cu) to change from a <100>-type dumbbell to a <110>-type dumbbell. Concurrently, SIA migration switches from the 3-D random walk characteristic of <100>-type dumbbells to a 1-D mechanism analogous to that of crowdion SIAs. Furthermore, the relative energies of these two dumbbell structures as a function of strain are well predicted using elastic dipole tensors computed at zero strain, indicating that examination of these tensors may be used to assess the likelihood of strain-induced SIA structure transitions in other materials. Changes in lowest energy SIA structures and associated migration mechanisms stand to impact predictions of SIA behavior in irradiated solids.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Diffusion Paths for Interstitial Impurities in Different Polymorphic Modifications of Niobium Silicide Nb{sub 5}Si{sub 3}

Structural models of the α, β, and γ modifications of Nb{sub 5}Si{sub 3} silicides, which are used as a reinforcing phase in composites obtained in situ based on the Nb‒Si system, have been constructed by computer simulation methods. A geometric analysis of unit cells is performed using the H-poisk program to estimate the voids existing in the structures. The results of measuring the number of voids and their sizes are reported. A conclusion about possible diffusion paths of interstitial boron, carbon, nitrogen and oxygen atoms is drawn based on the calculation results, and the solubility of these impurities in the structure of each Nb{sub 5}Si{sub 3} modification is estimated.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Improved Accident Tolerance of Austenitic Stainless Steel Cladding through Colossal Supersaturation with Interstitial Solutes

We proposed a program-supporting research project in the area of fuel-cycle R&D, specifically on the topic of advanced fuels. Our goal was to investigate whether SECIS (surface engineering by concentrated interstitial solute – carbon, nitrogen) can improve the properties of austenitic stainless steels and related structural alloys such that they can be used for nuclear fuel cladding in LWRs (light-water reactors) and significantly excel currently used alloys with regard to performance, safety, service life, and accident tolerance. We intended to demonstrate that SECIS can be adapted for post-processing of clad tubing to significantly enhance mechanical properties (hardness, wear resistance, and fatigue life), corrosion resistance, resistance to stress–corrosion cracking (hydrogen-induced embrittlement), and – potentially – radiation resistance (against electron-, neutron-, or ion-radiation damage). To test this hypothesis, we measured various relevant properties of the surface-engineered alloys and compared them with corresponding properties of the non–treated, as-received alloys. In particular, we studied the impact of heat exposure corresponding to BWR (boiling-water reactor) working and accident (loss-of-coolant) conditions and the effect of ion irradiation.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2015

STABILITY OF SMALL SELF-INTERSTITIAL CLUSTERS IN TUNGSTEN

Density functional theory was employed to explore the stability of interstitial clusters in W up to size seven. For each cluster size, the most stable configuration consists of parallel dumbbells. For clusters larger than size three, parallel dumbbells prefer to form in a multilayer fashion, instead of a planar structure. For size-7 clusters, the most stable configuration is a complete octahedron. The binding energy of a [111] dumbbell to the most stable cluster increases with cluster size, namely 2.49, 3.68, 4.76, 4.82, 5.47, and 6.85 eV for clusters of size 1, 2, 3, 4, 5, and 6, respectively. For a size-2 cluster, collinear dumbbells are still repulsive at the maximum allowable distance of 13.8 Å (the fifth neighbor along [111]). On the other hand, parallel dumbbells are strongly bound together. Two parallel dumbbells in which the axis-to-axis distance is within a cylindrical radius of 5.2 Å still exhibit a considerable binding of 0.28 eV. The most stable cluster in each size will be used to explore interactions with transmutation products.

density functional theory↗
DOE OSTI2018

Controlled Expansion of a Strong‐Field Iron Nitride Cluster: Multi‐Site Ligand Substitution as a Strategy for Activating Interstitial Nitride Nucleophilicity

Abstract Multimetallic clusters have long been investigated as molecular surrogates for reactive sites on metal surfaces. In the case of the μ 4 ‐nitrido cluster [Fe 4 (μ 4 ‐N)(CO) 12 ] − , this analogy is limited owing to the electron‐withdrawing effect of carbonyl ligands on the iron nitride core. Described here is the synthesis and reactivity of [Fe 4 (μ 4 ‐N)(CO) 8 (CNAr Mes2 ) 4 ] − , an electron‐rich analogue of [Fe 4 (μ 4 ‐N)(CO) 12 ] − , where the interstitial nitride displays significant nucleophilicity. This characteristic enables rational expansion with main‐group and transition‐metal centers to yield unsaturated sites. The resulting clusters display surface‐like reactivity through coordination‐sphere‐dependent atom rearrangement and metal–metal cooperativity.

Drance, Myles J.↗
DOE OSTI2021

Reactivities of Interstitial Hydrides in a Cu 11 Template: En Route to Bimetallic Clusters

In sharp contrast to surface hydrides, reactivities of interstitial hydrides are difficult to explore. When treated with a metal ion (Cu + , Ag + , and Au + ), the stable CuI dihydride template [Cu 11 H 2 {S 2 P(OiPr) 2 } 6 (C≡CPh) 3 ] (H 2 Cu 11 ) generates surprisingly three very different compounds, namely [CuH 2 Cu 11 {S 2 P(OiPr) 2 } 6 (C≡CPh) 3 ] + (1), [AgH 2 Cu 14 {S 2 P(OiPr) 2 } 6 ((C≡CPh) 6 ] + (2), and [AuCu 11 {S 2 P(OiPr) 2 } 6 (C≡CPh) 3 Cl] (3). Compounds 1 and 2 are both MI species and maintain the same number of hydride ligands as their H 2 Cu 11 precursor. Neutron diffraction revealed the first time a trigonal-pyramidal hydride coordination mode in the AgCu 3 environment of 2. 3 has no hydride and exhibits a mixed-valent [AuCu 11 ] 10+ metal core, making it a two-electron superatom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

An Ensemble Method for Classifying Regional Disease Patterns of Diffuse Interstitial Lung Disease Using HRCT Images from Different Vendors

We propose the use of ensemble classifiers to overcome inter-scanner variations in the differentiation of regional disease patterns in high-resolution computed tomography (HRCT) images of diffuse interstitial lung disease patients obtained from different scanners. A total of 600 rectangular 20 × 20-pixel regions of interest (ROIs) on HRCT images obtained from two different scanners (GE and Siemens) and the whole lung area of 92 HRCT images were classified as one of six regional pulmonary disease patterns by two expert radiologists. Textual and shape features were extracted from each ROI and the whole lung parenchyma. For automatic classification, individual and ensemble classifiers were trained and tested with the ROI dataset. We designed the following three experimental sets: an intra-scanner study in which the training and test sets were from the same scanner, an integrated scanner study in which the data from the two scanners were merged, and an inter-scanner study in which the training and test sets were acquired from different scanners. In the ROI-based classification, the ensemble classifiers showed better (p < 0.001) accuracy (89.73%, SD = 0.43) than the individual classifiers (88.38%, SD = 0.31) in the integrated scanner test. The ensemble classifiers also showed partial improvements in the intra- and inter-scanner tests. In the whole lung classification experiment, the quantification accuracies of the ensemble classifiers with integrated training (49.57%) were higher (p < 0.001) than the individual classifiers (48.19%). Furthermore, the ensemble classifiers also showed better performance in both the intra- and inter-scanner experiments. We concluded that the ensemble classifiers provide better performance when using integrated scanner images.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2020

Creep Deformation and Dynamic Grain Growth in an Interstitial-Free Steel

Dynamic grain growth is demonstrated to be much faster than static grain growth in a body-centered-cubic, interstitial-free steel sheet material at 850°C. Dynamic grain growth occurs during concurrent plastic deformation at elevated temperature, whereas static grain growth occurs during static annealing. Grain growth during steady-state plastic flow in tension at 850°C to a true strain of 0.2 at a true-strain rate of 10 -4 s -1 doubled grain size, while static annealing for the same time produced no increase in grain size. This is described as dynamic normal grain growth (DNGG) because no abnormally large grains were observed. The recrystallized microstructure of the steel demonstrated a log-normal distribution of grain sizes. DNGG produced bimodal grain size distributions that deviate from the theoretical expectation of a simple shift to larger sizes during normal growth. The bimodal distributions contained a remnant of small grains that were not consumed during grain growth. DNGG produced a crystallographic texture that is unique from both the recrystallized material and that produced by lattice rotation alone. DNGG strengthened the {111}&lang;110&rang; and {111}&lang;112&rang; components of the strong γ-fiber component in the original recrystallization texture. Lattice rotation from tensile deformation, by contrast, strengthened the α-fiber components that intersect the original γ-fiber.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effects of Strain and Strain Rate on Dynamic Grain Growth and Subgrain Evolution During Plastic Deformation of an Interstitial-Free Steel at 850 ° C

Here, the effects of strain and strain rate on dynamic grain growth (DGG) and subgrain evolution are reported for an interstitial-free steel deformed at 850 ° C. Microstructures produced during tension tests at true-strain rates of 10 -4 and to 10 -3 s -1 true strains ranging from 0.02 to 0.2 were preserved following deformation. These were characterized using electron backscatter diffraction (EBSD), including the application of spherical harmonic transform indexing to produce high-angular-resolution EBSD (HR-EBSD) data. HR-EBSD data resolved the small misorientation angles of subgrain boundaries while imaging much larger data fields than possible with previously available techniques. The resulting data confirmed that steady-state flow stress is inversely proportional to the average subgrain size and that subgrain boundary misorientation angle increases with strain. The following new observations are reported. The rate of DGG increased with respect to time but decreased with respect to strain as strain rate increased. This behavior is rationalized through a simple model using separate rate parameters for the effects of time and strain. Subgrain size was not constant during steady-state deformation, but decreased slowly with increasing strain. Subgrain size distributions and subgrain boundary misorientation angle distributions were measured, and both remained approximately log-normal during steady-state deformation. Subgrain evolution demonstrated no dependence on parent grain size, crystallographic orientation, or Taylor factor. These new data suggest that steady-state flow stress is more likely controlled by the dislocation density internal to subgrains than by the spacing between subgrain boundaries.

dynamic grain growth↗
DOE OSTI2019

Effect of Annealing Treatment on Mechanical and Magnetic Softening Behaviors of Cold Rolled Interstitial-Free Steel

The recovery and recrystallization behaviors of low-carbon interstitial-free steel are investigated at different annealing temperatures (200-690 °C) through correlation between the changes in magnetic parameters (coercivity and r.m.s. voltage), hardness, tensile strength and high-angle grain boundary fractions (HAB). Magnetic parameters and tensile strength show a significant change within recovery region (200-500 °C), while the hardness variation is very minimal at this temperature region. On the other hand, the hardness is abruptly changed compared to magnetic properties at higher annealing temperature (550-640 °C). The grain boundary characteristics and microtexture evolution occurring at recrystallization regime are evaluated by orientation imaging microscopy (OIM) and orientation distribution function (ODF) through electron backscattered diffraction (EBSD). The increase in recrystallization fraction noticeably affects microtexture property, justifying with the strengthening of γ-fiber, weakening of α-fiber and disappearance of rotated cube component with increasing annealing temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Tumor expression and usefulness as a biomarker of programmed death ligand 1 in advanced non-small cell lung cancer patients with preexisting interstitial lung disease

In non-small cell lung cancer (NSCLC) patients, the expression of tumor programmed death ligand 1 (PD-L1) is an important parameter for deciding the timing of the use of anti-programmed cell death 1 (PD-1) antibody. There has been increasing concern over the benefit of anti-PD-1 antibody in high-risk patients, such as those with preexisting interstitial lung disease (ILD). However, the status and value of PD-L1 as a predictive biomarker and the efficacy of anti-PD-1 antibody in NSCLC patients with preexisting ILD remains uncertain. We retrospectively reviewed the medical records of advanced/recurrent NSCLC patients who had undergone analysis of the tumor PD-L1 expression. We identified 358 patients with advanced/recurrent NSCLC who had undergone analysis of tumor PD-LI expression. Of these, 210 received anti-PD-1 antibody. Tumor-cell PD-L1 expression was similar between the groups with and without preexisting ILD (median, 35%; interquartile range, 0–70%; vs. median, 10%; interquartile range, 1–68%; p = 0.66). Of the 210 patients who received anti-PD-1 antibody, 14 patients had preexisting ILD. The progression-free survival (PFS) showed no significant difference between the patients receiving anti-PD-1 antibody with and without preexisting ILD (median PFS, 4.3 vs. 5.3 months; HR, 0.97; p = 0.84). Within the patients with preexisting ILD, the PFS was tended to be longer in the patients with tumor PD-L1 expression ≥ 50% than in those with tumor PD-L1 expression < 50% (median PFS, 12.5 vs. 2.5 months; HR, 0.47; p = 0.14). The value of PD-L1 expression as a biomarker may be comparable between patients with and without preexisting ILD.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2018

Involvement of prostatic interstitial cells of Cajal in inflammatory cytokines-elicited catecholamines production: Implications for the pathophysiology of chronic prostatitis/chronic pelvic pain syndrome (CP/CPPS)

Highlights: • Prostatic ICCs express enzymes essential for catecholamine synthesis. • Proinflammatory cytokines stimulate catecholamine synthesis in ICCs. • NF-κB, HIF-1α and HDACs pathways are required for ICCs function. In a previous work using guinea pig prostate, we have identified a novel interstitial cells of Cajal (ICCs) which possess close contacts between sympathetic nerve bundles and smooth muscle cells. The ability of prostatic ICCs in mediating excitatory neural inputs was therefore studied using isolated murine prostate ICCs by collagenase digestion combined with FACS method. RT-PCR and Western blotting analyses revealed that prostatic ICCs under a quiescent state expressed abundantly the rate-limiting enzymes essential for catecholamine synthesis. Moreover, distinct proinflammatory cytokines (e.g. IL-1β, IL-8, ICAM-1 and TNF-α) could significantly stimulate the expression levels of the rate-limiting enzymes of catecholamine production in prostate ICCs. Mechanistically, the above-mentioned stimulatory effects of proinflammatory cytokines appeared to be mediated via activation of NF-κB, HIF-1α and HDACs signaling pathways. Considering that prostatic catecholamine overactivity serves as an essential etiology of pelvic pain by indirectly stimulating the smooth muscle cell proliferation, or by directly causing muscular spasm, our results collectively suggest that targeting the NF-κB, HIF-1α and HDACs pathways in prostate ICCs be considered as a new strategy for treatment of chronic pelvic pain syndrome (CPPS) induced by chronic prostatitis (CP). Overall, the current study should shed novel light on the biology of this unique prostate ICCs.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2017

Conversion of lanthanide glutarate chlorides with interstitial THF into lanthanide glutarates with unprecedented topologies

Here, using slow diffusion methods at room temperature (RT), we obtained four isomorphous lanthanide glutarate chlorides, accommodating interstitial THF and water molecules, [Ln 2 (Glut) 2 Cl 2 (H 2 O) 8 ]·2H 2 O·THF, with Ln = La , Ce, Pr, Nd. They assemble as 3-dimensional (3D) lanthanide (Ln) coordination polymers with LnO 10 coordination polyhedra. Their topology was elucidated to be a 4-coordinated sql net. slowly dissolve in water liberating the entrapped THF molecules and reassemble as regular Ln-glutarate hydrates when the solution is deprived of THF and water by slow evaporation. The new products crystallize as [Ln 2 (Glut) 3 (H 2 O) 3 ]·5H 2 O, with Ln = La, Ce, Pr, and [Nd 2 (Glut) 3 (H 2 O) 2 ]·3.5H 2 O.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Computed Tomography–Guided Interstitial High-Dose-Rate Brachytherapy in Combination With Regional Positive Lymph Node Intensity-Modulated Radiation Therapy in Locally Advanced Peripheral Non–Small Cell Lung Cancer: A Phase 1 Clinical Trial

Purpose: To assess the technical safety, adverse events, and efficacy of computed tomography (CT)-guided interstitial high-dose-rate (HDR) brachytherapy in combination with regional positive lymph node intensity modulated radiation therapy in patients with locally advanced peripheral non–small cell lung cancer (NSCLC). Methods and Materials: Twenty-six patients with histologically confirmed NSCLC were enrolled in a prospective, officially approved phase 1 trial. Primary tumors were treated with HDR brachytherapy. A single 30-Gy dose was delivered to the 90% isodose line of the gross lung tumor volume. A total dose of at least 70 Gy was administered to the 95% isodose line of the planning target volume of malignant lymph nodes using 6-MV X-rays. The patients received concurrent or sequential chemotherapy. We assessed treatment efficacy, adverse events, and radiation toxicity. Results: The median follow-up time was 28 months (range, 7-44 months). There were 3 cases of mild pneumothorax but no cases of hemothorax, dyspnea, or pyothorax after the procedure. Grade 3 or 4 acute hematologic toxicity was observed in 5 patients. During follow-up, mild fibrosis around the puncture point was observed on the CT scans of 2 patients, but both patients were asymptomatic. The overall response rates (complete and partial) for the primary mass and positive lymph nodes were 100% and 92.3%, respectively. The 1-year and 2-year overall survival (OS) rates were 90.9% and 67%, respectively, with a median OS of 22.5 months. Conclusion: Our findings suggest that HDR brachytherapy is safe and feasible for peripheral locally advanced NSCLC, justifying a phase 2 clinical trial.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2016

Direction Modulated Brachytherapy for Treatment of Cervical Cancer. II: Comparative Planning Study With Intracavitary and Intracavitary–Interstitial Techniques

Purpose: To perform a comprehensive comparative planning study evaluating the utility of the proposed direction modulated brachytherapy (DMBT) tandem applicator against standard applicators, in the setting of image guided adaptive brachytherapy of cervical cancer. Methods and Materials: A detailed conceptual article was published in 2014. The proposed DMBT tandem applicator has 6 peripheral grooves of 1.3-mm width, along a 5.4-mm-thick nonmagnetic tungsten alloy rod of density 18.0 g/cm{sup 3}, capable of generating directional dose profiles. We performed a comparative planning study with 45 cervical cancer patients enrolled consecutively in the prospective observational EMBRACE study. In all patients, MRI-based planning was performed while utilizing various tandem-ring (27 patients) and tandem-ring-needles (18 patients) applicators, in accordance with the Groupe Européen de Curiethérapie–European Society for Radiotherapy and Oncology recommendations. For unbiased comparisons, all cases were replanned with an in-house–developed inverse optimization code while enforcing a uniform set of constraints that are reflective of the clinical practice. All plans were normalized to the same high-risk clinical target volume D90 values achieved in the original clinical plans. Results: In general, if the standard tandem was replaced with the DMBT tandem while maintaining all other planning conditions the same, there was consistent improvement in the plan quality. For example, among the 18 tandem-ring-needles cases, the average D2cm{sup 3} reductions achieved were −2.48% ± 11.03%, −4.45% ± 5.24%, and −5.66% ± 6.43% for the bladder, rectum, and sigmoid, respectively. An opportunity may also exist in avoiding use of needles altogether for when the total number of needles required is small (approximately 2 to 3 needles or less), if DMBT tandem is used. Conclusions: Integrating the novel DMBT tandem onto both intracavitary and intracavitary–interstitial applicator assembly enabled consistent improvement in the sparing of the OARs, over a standard “single-channel” tandem, though individual variations in benefit were considerable. Although at an early stage of development, the DMBT concept design is demonstrated to be useful and pragmatic for potential clinical translation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗