Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM ARSENIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Growth-interruption-induced low-density InAs quantum dots on GaAs

We investigate the use of growth interruption to obtain low-density InAs quantum dots (QDs) on GaAs. The process was realized by Ostwald-type ripening of a thin InAs layer. It was found that the optical properties of the QDs as a function of growth interruption strongly depend on InAs growth rate. By using this approach, a low density of QDs (4 dots/{mu}m{sup 2}) with uniform size distribution was achieved. As compared to QDs grown without growth interruption, a larger energy separation between the QD confined levels was observed, suggesting a situation closer to the ideal zero-dimensional system. Combining with an InGaAs capping layer such as In-rich QDs enable 1.3 {mu}m emission at 4 K.

36 MATERIALS SCIENCE↗

Thermal peculiarity of AlAs-capped InAs quantum dots in a GaAs matrix

GaAs and AlAs thin capping layers as well as postgrowth rapid thermal annealing (RTA) were applied to InAs quantum dots (QDs) grown by molecular beam epitaxy to study the tunability of optical properties of QDs by photoluminescence (PL) methods. The PL of AlAs-capped QDs shows double-peak structure, as opposed to GaAs-capped QDs, which is due to the formation of two families of QDs in the AlAs-capped sample confirmed by the power dependent PL measurements. The PL peak of the GaAs-capped samples subjected to RTA showed blueshift and narrowing with an increase in RTA temperature. This is the result of thermally enhanced In-Ga intermixing. More complex changes in the PL spectrum of AlAs-capped QDs during the RTA procedure were found and explained by the different In compositions in two branches of QDs. The features observed in the temperature dependences of PL peak energy of GaAs- and AlAs-capped samples were interpreted in terms of thermal escape of carriers from smaller QDs with further redistribution between larger QDs and different InAs content in two families of QDs.

36 MATERIALS SCIENCE↗

Structural characterization of GaAs and InAs nanowires by means of Raman spectroscopy

We report Raman studies of GaAs and InAs nanowires (NWs) grown on SiO{sub 2} and GaAs surfaces by means of catalyst-assisted molecular beam epitaxy. We have investigated several tens of NWs grown using either Mn or Au as a catalyst. The LO and TO phonon lines of the NWs showed an energy downshift and a broadening as compared to the lines usually observed in the corresponding bulk materials. A doublet is sometimes observed in the LO region due to the observation of a signal attributed to the surface optical (SO) phonon. The energy position of the SO phonon agrees with the values expected considering the section diameter of the NWs. LO and TO downshifts are due to the presence of structural defects within the NWs. The larger the energy downshift, the smaller the dimension of the defect-free regions. The results demonstrate that different catalysts provide wires with comparable crystal quality. The measurements also point out that differences in defect density can be found in wires coming from the same batch indicating that a substantial effort will be needed to obtain high homogeneities of the NW quality.

36 MATERIALS SCIENCE↗

Epitaxial growth of quantum rods with high aspect ratio and compositional contrast

The epitaxial growth of quantum rods (QRs) on GaAs was investigated. It was found that GaAs thickness in the GaAs/InAs superlattice used for QR formation plays a key role in improving the QR structural properties. Increasing the GaAs thickness results in both an increased In compositional contrast between the QRs and surrounding layer, and an increased QR length. QRs with an aspect ratio of up to 10 were obtained, representing quasiquantum wires in a GaAs matrix. Due to modified confinement and strain potential, such nanostructure is promising for controlling gain polarization.

36 MATERIALS SCIENCE↗

Optical stability of shape-engineered InAs/InAlGaAs quantum dots

The optical properties of shape-engineered InAs/InAlGaAs quantum dots (SEQDs) were investigated by temperature-dependent and excitation-power-dependent photoluminescence (PL) spectroscopy and compared with those of the conventionally grown InAs QDs (CQDs). The emission wavelength of the InAs/InAlGaAs SEQDs at 240 K was redshifted by 18 nm from that at 15 K, which was relatively smaller than that of the InAs CQDs (97 nm). The PL yield at 240 K was reduced to 1/86 and 1/65 of that measured at 15 K for the InAs CQDs and the InAs/InAlGaAs SEQDs, respectively. The emission wavelength for the InAs CQDs was blueshifted by 76 nm with increasing excitation power from 0.56 to 188 mW, compared to only by 7 nm for the InAs/InAlGaAs SEQDs. These results indicated that the InAs/InAlGaAs SEQDs were optically more stable than the InAs CQDs mainly due to the enhancement of the carrier confinement in the vertical direction and the improvement in the size uniformity.

36 MATERIALS SCIENCE↗

Single quantum dot emission by nanoscale selective growth of InAs on GaAs: A bottom-up approach

We report on single dot microphotoluminescence ({mu}PL) emission at low temperature and low power from InAs dots grown by molecular beam epitaxy in nanoscale holes of a SiO{sub 2} mask deposited on GaAs(001). By comparing atomic force microscopy measurements with {mu}PL data, we show that the dot sizes inside the nanoholes are smaller than those of the dots nucleated on the extended GaAs surface. PL of dots spans a wide energy range depending on their size and on the thickness and composition of the InGaAs capping layer. Time-resolved PL experiments demonstrate a negligible loss of radiative recombination efficiency, proving highly effective in the site-controlled dot nucleation.

36 MATERIALS SCIENCE↗

Uniform InGaAs quantum dot arrays fabricated using nanosphere lithography

We demonstrate the fabrication of optically active uniform InGaAs quantum dot arrays by combining nanosphere lithography and bromine ion-beam-assisted etching on a single InGaAs/GaAs quantum well. A wide range of lateral dot sizes was achieved from an oxygen plasma nanosphere resizing process. The increased lateral confinement of carriers in the dots results in low temperature photoluminescence blueshifts from 0.5 to 11 meV. Additional quantization was achieved using a selective wet-etch process. Our model suggests the presence of a 70 nm dead layer in the outer InGaAs radial edge, which we believe to be a result of defects and dislocations introduced during the dry-etch process.

36 MATERIALS SCIENCE↗

Temperature dependence of the photoluminescence emission from In{sub x}Ga{sub 1-x}As quantum wells on GaAs(311) substrates

We studied the photoluminescence (PL) properties of In{sub 0.2}Ga{sub 0.8}As/GaAs quantum well structures grown by molecular beam epitaxy on (311)-oriented substrates. The structure consists of three quantum wells (QWs) of 100, 50, and 25 A nominal thickness. The temperature dependence of the PL emission from the QWs in the range of 5-250 K is reported. Three models by Varshni, Vina, and Paessler, respectively, were employed to analyze the variation in the excitonic energy transitions as a function of temperature. We compared the excitonic behavior with the band gap temperature dependence of bulk In{sub 0.2}Ga{sub 0.8}As and found a difference, as opposed to the unstrained AlGaAs/GaAs system. We attributed this difference to the modification of the QW energy levels by the quantum confinement Stark effect, which is temperature and well width dependent.

36 MATERIALS SCIENCE↗

Intracavity terahertz generation inside a high-energy ultrafast soliton fiber laser

Intracavity terahertz emission inside a high-energy ultrafast Yb-doped fiber laser is presented. The terahertz radiation is generated by a transient photocurrent induced at the surface of a saturable InGaAs multiquantum well grown by molecular beam epitaxy on top of a semiconductor Bragg reflector. This device simultaneously works as the saturable absorber mirror for initiating and managing the passive mode locking required for the ultrashort pulse operation of the laser system. The maximum terahertz average power achieved is 4.2 {mu}W, which reveals a net conversion efficiency of 3.1x10{sup -5}.

36 MATERIALS SCIENCE↗

Localized growth of InAs quantum dots on nanopatterned InP(001) substrates

We present the method of site-controlled growth of InAs quantum dots on InP(001) by solid-source molecular beam epitaxy. InAs dots are positioned using nanopatterns realized by electron beam lithography and dry etching. We have obtained the localized InAs dots for InAs deposit thickness inferior to the critical thickness for the two-dimensional/three-dimensional growth mode transition measured on a flat InP surface, implying that the dots can be actively positioned at predefined nucleation sites. Photoluminescence results show the emission of localized InAs dots on patterns overgrown with a thin InP buffer layer, at a wavelength around 1.5 {mu}m at room temperature.

36 MATERIALS SCIENCE↗

Room-temperature ferromagneticlike behavior in Mn-implanted and postannealed InAs layers deposited by molecular beam epitaxy

We report on the magnetic and structural properties of Ar- and Mn-implanted InAs epitaxial films grown on GaAs (100) by molecular beam epitaxy and the effect of rapid thermal annealing (RTA) for 30 s at 750 deg. C. Channeling particle induced x-ray emission (PIXE) experiments reveal that after Mn implantation almost all Mn atoms are substitutional in the In site of the InAs lattice, like in a diluted magnetic semiconductor. All of these samples show diamagnetic behavior. However, after RTA treatment the Mn-InAs films exhibit room-temperature magnetism. According to PIXE measurements the Mn atoms are no longer substitutional. When the same set of experiments was performed with Ar as implantation ion, all of the layers present diamagnetism without exception. This indicates that the appearance of room-temperature ferromagneticlike behavior in the Mn-InAs-RTA layer is not related to lattice disorder produced during implantation but to a Mn reaction produced after a short thermal treatment. X-ray diffraction patterns and Rutherford backscattering measurements evidence the segregation of an oxygen-deficient MnO{sub 2} phase (nominally MnO{sub 1.94}) in the Mn-InAs-RTA epitaxial layers which might be the origin of the room-temperature ferromagneticlike response observed.

36 MATERIALS SCIENCE↗

Intervalley separation in the conduction band of InGaAs measured by terahertz excitation spectroscopy

Spectral dependencies of terahertz radiation from the femtosecond laser-illuminated surfaces of Ga{sub x}In{sub 1-x}As (x=1, 0.8, and 0.47) have been investigated experimentally at high optical fluencies and laser wavelengths ranging from 600 to 800 nm. The terahertz pulse amplitude increased with the increasing laser photon energy due to larger excess energies of photoexcited electrons and more efficient spatial separation of electrons and holes at the illuminated surface. This increase was stopped with the onset of electron transitions to subsidiary conduction band valleys. Analysis of these experiments was used for evaluating the energy positions of the X and L conduction band valleys in Ga{sub x}In{sub 1-x}As alloys as a function of their composition.

36 MATERIALS SCIENCE↗

Direct formation of InAs quantum dots grown on InP (001) by solid-source molecular beam epitaxy

We have developed a growth process that leads to the direct formation of self-assembled InAs quantum dots on InP(001) by solid-source molecular beam epitaxy avoiding the previous formation of quantum wires usually obtained by this technique. The process consists of a periodically alternated deposition of In and As correlated with InAs(4x2){r_reversible}(2x4) surface reconstruction changes. Based on the results obtained by in situ characterization techniques, we propose that the quantum dots formation is possible due to the nucleation of In droplets over the InAs(4x2) surface during the In deposition step and their subsequent crystallization under the As step.

36 MATERIALS SCIENCE↗

Strong enhancement of terahertz emission from GaAs in InAs/GaAs quantum dot structures

We report on the intense terahertz emission from InAs/GaAs quantum dot (QD) structures grown by molecular beam epitaxy. Results reveal that the QD sample emission was as high as 70% of that of a p-type InAs wafer, the most intense semiconductor emitter to date. Excitation wavelength studies showed that the emission was due to absorption in strained undoped GaAs, and corresponds to a two order-of-magnitude enhancement. Moreover, it was found that multilayer QDs emit more strongly compared with a single layer QD sample. At present, we ascribe the intense radiation to huge strain fields at the InAs/GaAs interface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanophotonic technologies for innovative all- optical signal processor using photonic crystals and quantum dots

GaAs-based two-dimensional photonic crystal (2DPC) slab waveguides (WGs) and InAs quantum dots (QDs) were developed for key photonic device structures in the future. An ultrasmall and ultrafast symmetrical Mach-Zehnder (SMZ)-type all-optical switch (PC-SMZ) and an optical flip-flop device (PC-FF) have been developed based on these nanophotonic structures for an ultrafast digital photonic network. To realize these devices, two important techniques were developed. One is a new simulation method, i.e., topology optimization method of 2DPC WGs with wide/flat bandwidth, high transmittance and low reflectivity. Another is a new selective-area-growth method, i.e., metal-mask molecular beam epitaxy method of InAs QDs. This technique contributes to achieving high-density and highly uniform InAs QDs in a desired area such as an optical nonlinearity-induced phase shift arm in the PC-FF. Furthermore, as a unique site-controlled QD technique, a nano-jet probe method is also developed for positioning QDs at the centre of the optical nonlinearity-induced phase shift arm.

36 MATERIALS SCIENCE↗

Monte Carlo investigation of terahertz plasma oscillations in gated ultrathin channel of n-InGaAs

By numerical simulations we investigate the dispersion of the plasma frequency in a gated channel of n-type InGaAs layer of thickness W and submicron length L at T=300 K. In the presence of a source-drain voltage and for a carrier concentrations of 10{sup 18} cm{sup -3} the spectra evidences a peaked shape with two main bumps, the former at high frequency corresponding to the three-dimensional plasma frequency and the latter at a low frequency. The frequency value of the latter peak exhibits a dispersion as the inverse of the channel length in agreement with the predictions of gradual channel approximation. At increasing drain voltages the instabilities associated with the presence of Gunn domains are responsible for a suppression of the plasma peak in favor of the onset of a peak in the subterahertz domain associated with transit time effects.

36 MATERIALS SCIENCE↗

Application of InGaAs/GaAs superlattice-base structure for InGaP/GaAs superlattice-emitter bipolar transistor

The performance of an InGaP/GaAs superlattice-emitter bipolar transistor with InGaAs/GaAs superlattice-base structure is demonstrated by experimental results. The injecting electrons from superlattice emitter are easy to transport into the superlattice-base region for promoting the collector current by tunneling behavior. Furthermore, the average energy gap of base regime is substantially reduced by the use of InGaAs/GaAs superlattice structure for the requirement of low turn-on voltage. Experimentally, the transistor exhibits a maximum common-emitter current gain of 295 and a relatively low collector-emitter offset voltage of only 16 mV. In particular, the ideality factor of collector current near to unity is obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

InGaAs/GaAs (110) quantum dot formation via step meandering

InGaAs (110) semiconductor quantum dots (QDs) offer very promising prospects as a material base for a new generation of high-speed spintronic devices, such as single electron transistors for quantum computing. However, the spontaneous formation of InGaAs QDs is prevented by two-dimensional (2D) layer-by-layer growth on singular GaAs (110) substrates. In this work we have studied, by using atomic force microscopy and photoluminescence spectroscopy (PL), the growth of InGaAs/GaAs QDs on GaAs (110) stepped substrates by molecular beam epitaxy (MBE), and the modification of the adatom incorporation kinetics to surface steps in the presence of chemisorbed atomic hydrogen. The as-grown QDs exhibit lateral dimensions below 100 nm and emission peaks in the 1.35-1.37 eV range. It has been found that a step meandering instability derived from the preferential attachment of In adatoms to [110]-step edges relative to [11n]-type steps plays a key role in the destabilization of 2D growth that leads to 3D mound formation on both conventional and H-terminated vicinal substrates. In the latter case, the driving force for 3D growth via step meandering is enhanced by H-induced upward mass transport in addition to the lower energy cost associated with island formation on H-terminated substrates, which results in a high density array of InGaAs/GaAs dots selectively nucleated on the terrace apices with reduced lateral dimensions and improved PL efficiency relative to those of conventional MBE-grown samples.

36 MATERIALS SCIENCE↗