Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IGNEOUS ROCKS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Interpreting Assemblages with Titanite (Sphene): It Does not have to be Greek to You.

Assemblages with titanite, pyroxene(s), olivine, ilmenite, magnetite, and quartz can be used to constrain the intensive and compositional variables that operate during crystallization. Such assemblages are relatively rare in metamorphic rocks, but they are more common in igneous rocks and more frequently reported in plutonic than volcanic rocks. We used the program QUILF, enhanced with thermodynamic data for titanite, to compute stable reactions among titanite (CaTiOSiO4), Fe-Mg-Ti ilmenite and magnetite (hereafter ilmenite and magnetite), Ca-Mg-Fe pyroxenes and olivine, and quartz, and to evaluate some of the factors that control titanite stability. Calculations at 1, 3, and 6 Kbar and 650, 850, 1100 0 C, in the system CaO - MgO - FeO Fe2O3 - TiO2 - SiO2, suggest that the reactions: Augitc + Ilmenite = Titanite + Magnetite + Quartz and Augite + Ilmenite + Quartz = Titanite + Orthopyroxene, impose well defined fugacity of O2, alpha(sub SiO2), , and compositional restrictions to the assemblages: (1) Titanite + Magnetite + Quartz, (2) Titanite + Orthopyroxene, (3) Augite + Ilmenite, and consequently titanite stability. From our calculations in this system we can draw the following general conclusions: (1) The assemblage Titanite + Magnetite + Quartz is always a good indicator of relatively high fugacity of O2, and it is likely more common in relatively iron-rich bulk compositions and for decreasing temperature and pressure conditions. (2) At high temperatures (>= 650 C) titanite is not stable in quartz-saturated rocks that contain the assemblage Orthopyroxene + Augite + Ilmenite + Magnetite. (3) In quartz-saturated rocks the coexistence of titanite and magnetite with either orthopyroxene or olivine requires a confluence of conditions relating bulk composition, fugacity of O2, and slow cooling. Thus, such assemblages must be rare. (4) Regardless of T and fugacity of O2 conditions, and bulk-composition, titanite is not stable in quartz-absent rocks that contain Olivine + Orthopyroxene + Augite + Ilmenite + Magnetite. Decreasing temperature and pressure conditions appear to favor titanite crystallization, thus, it is not unsurprising that titanite is frequently observed in slowly cooled rocks, albeit, in association with amphibole. We argue that the titanite + amphibole association is likely favored by high water activity, regardless of oxygen fugacity. Because water activity increases during crystallization of a pluton, the association titanite + amphibole, and consequently titanite, is likely to be more common in plutonic rocks than in volcanic rocks.

Xirouchakis, Dimitrios M.↗
NASA NTRS2023

An evolutionary system of mineralogy, Part VI: Earth’s earliest Hadean crust (> 4370 Ma)

Part VI of the evolutionary system of mineralogy catalogs 262 kinds of minerals, formed by 18 different processes, that we suggest represent the earliest solid phases in Earth’s crust. All of these minerals likely formed during the first tens of millions of years following the global-scale disruption of the Moon-forming impact prior to ~4.4 Ga, though no samples of terrestrial minerals older than ~4.37 Ga are known to have survived on Earth today. Our catalog of the earliest Hadean species includes 80 primary phases associated with ultramafic and mafic igneous rocks, as well as more than 80 minerals deposited from immiscible S-rich fluids and late-stage Si-rich residual melts. Earth’s earliest crustal minerals also included more than 200 secondary phases of these primary minerals that were generated by thermal metamorphism, aqueous alteration, impacts, and other processes. In particular, secondary mineralization related to pervasive near-surface aqueous fluids may have included serpentinization of mafic and ultramafic rocks, hot springs and submarine volcanic vent mineralization, hydrothermal sulfide deposits, zeolite and associated mineral formation in basaltic cavities, marine authigenesis, and hydration of subaerial lithologies. Additional Hadean minerals may have formed by thermal metamorphism of lava xenoliths, sublimation at volcanic fumaroles, impact processes, and volcanic lightning. These minerals would have occurred along with more than 180 additional phases found in the variety of meteorites that continuously fell to Earth’s surface during the early Hadean Eon.

Philosophy of mineralogy↗
DOE OSTI2020

Borehole Disposal: Update on the Science, Technology, and Potentially Suitable Radioactive Wastes - 20170

A recent Special Issue of the Energies Journal on Deep Borehole Disposal of Nuclear Waste has delivered a timely update on the science and technology of borehole disposal and the types of radioactive wastes it could potentially accommodate. The Special Issue papers discuss (i) circumstances under which a national waste management programme might wish to consider deep borehole disposal [1], (ii) a status report of deep borehole disposal options in Germany [2], (iii) the use of deep horizontal drill-holes in sedimentary, metamorphic or igneous rocks for disposal of spent nuclear fuel and high-level radioactive waste [3], (iv) the analysis of corrosion performance of engineered barrier systems [4], (v) a review of the potential cementing systems suitable for deep borehole disposal [5], (vi) the thermal evolution around heat-generating waste for a wide range of material properties and disposal configurations [6], (vii) a geochemical analysis of deep brines focussed on fluid-rock interactions [7], (viii) post-closure performance assessment calculations for deep borehole disposal of Cs/Sr capsules [8], and (ix) an example safety case for deep borehole disposal of nuclear wastes [9]. This paper provides an overview of the main findings from these publications and highlights some of the technological and scientific challenges that need to be overcome when developing a deep borehole disposal concept. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1972

Electron petrography of Apollo 14 and 15 rocks.

Comparative optical and high-voltage electron petrographic analyses of igneous rocks and several types of breccias the Fra Mauro and Apennine sites of Apollo 14 and 15 are reported and interpreted. The crystalline rocks are found to differ substantially from the Apollo 11 and 12 basalts. Substructures in the Apollo 14 breccias are complex. At least two bonding mechanisms can be discerned from the electron petrographic examination: (a) 'shock sintering' due to high pressures and temperatures associated with the shock waves of meteoritic impacts; and (b) lithification by glass bonding.

Lally, J. S.↗
NASA NTRS1972

Indium.

The abundances of indium in the cosmos, meteorites, and tektites, in rock-forming and ore minerals, and in common igneous rocks are tabulated, with brief comments. Indium's behavior in magmatogenic processes and during weathering and alteration of rocks is described. Attention is given to solubilities of compounds, adsorption processes, and valence states. Also tabulated are the abundances in common sediments and in sedimentary and metamorphic rocks.

Linn, T. A., Jr.↗
NASA NTRS1976

Carbides in lunar soils and rocks

Carbides and the surrounding metal of eight particles from Apollo 14, 16, and 17 soils were analyzed for C, Fe, Ni, and Co with the electron microprobe. In addition, carbide-containing metal particles in two Apollo 17 rocks were studied. Carbide-metal assemblages were found in anorthositic hornfels, melt rock, and agglutinate, but not in any primary igneous rocks. Carbon measurements show that cohenite is the carbide phase present in all the samples. Cohenite exsolves from the carbon-rich metal phase during cooling of the lunar metal particle in the host rocks or soil fragments. Measurements of two-phase interface compositions indicate equilibration for carbides and metal during cooling below 600 C and possibly below 500 C.

Goldstein, J. I.↗
NASA NTRS1993

Post-igneous redistribution of components in eucrites

In our analyses, we utilize a microdrilling technique that removes 40 to 100 micron diameter cores from mineral grains in thin sections analyzed by microprobe. The cores are then analyzed by INAA using the technique of Lindstrom. Three eucrites were selected for application of this analytical technique: monomict breccias Pasamonte and Stannern and unbrecciated EET90020. Pasamonte is among the most unequilibrated of the eucrites on the basis of zoning in pyroxenes and is considered to be an igneous rock not significantly affected by metamorphism. Stannern has igneous texture but its pyroxenes indicate some re-equilibration, although little, if any, recrystallization. EET90020 has a granulite texture and has been substantially recrystallized. Our sample of Pasamonte contains several clasts of different grain sizes ranging from glass to fine grained with diabasic texture containing lathy plagioclase, unexsolved pigeonite, and mesostasis. Cores were taken of the glass and from minerals and mesostases in six lithic clasts which normally allowed sampling of more than one phase per clast. Our sample of Stannern is also a breccia but with little difference in grain size between clasts and matrix. The plagioclase and pigeonite are blocky, twinned, and exsolved and coexist with a bit of mesostasis. Cores were taken of plagioclase and pigeonite with no attempt to distinguish separate clasts. EET90020 is a granular mixture of twinned plagioclase and pigeonite having rather uniform size and many triple junctions. Several cores were taken of both phases. Both clear and cloudy grains of plagioclase and pyroxene were sampled in all three eucrites.

Phinney, W. C.↗
NASA NTRS1974

Measurement of density and porosity of lunar rocks based on samples of Luna 16 automatic lunar station

Three fragments of holocrystalline igneous rocks of the gabbro type, weighing 30 to 50 mg each, were investigated. The density of the fragments was established with a mercury pycnometer and was found to be 3.05 to 3.12 g/cu cm, with a relative error not more than 2 percent. The porosity was found for the difference between the volumes determined with the mercury and with the gas techniques; for all three samples together it was 13 percent, and the error of determination was 70 percent owing to the small volumes. It can be anticipated that the porosity of the rock in bulk will be higher than the value obtained based on small fragments. The porosity of lunar rocks can markedly affect the isostatic distribution of rocks and must be taken into account when developing models of lunar structure.

Volynets, V. F.↗
NASA NTRS2001

The Curious Case of the Lunar Magnesian Granulitic Breccias

Magnesian granulitic breccias have high Th/Sm ratios, they are not related to Mg-suite plutonic rocks in any straightforward manner, and they may have an igneous rock precursor that is not yet recognized among our samples of the Moon. Additional information is contained in the original extended abstract.

Korotev, R. L.↗
NASA NTRS2015

Petrology of Diogenite NWA 5480, A Pristine Olivine-Rich Deformed Harzburgite

Diogenites are achondrites that are part of the HED (howardite, eucrite, diogenite) meteorite group thought to originate from asteroid Vesta. This suite of igneous rocks offers a glimpse of early planetary differentiation and subsequent igneous processes. While eucrites represent asteroidal basaltic crust and howardites the impact brecciated surface, diogenites are samples of the mantle and lower crust. Most of them are orthopyroxene (Opx) dominated cumulates, although harzburgites and rare dunites have also been found. The majority of diogenites are impact breccias. This study describes NWA 5480, a pristine, i.e. hardly altered and minimally shocked, harzburgitic diogenite.

Peslier, A. H.↗
NASA NTRS1972

Compositions and mineralogy of lithic fragments in 1-2 mm soil samples 14002,7 and 14258,33.

The compositional data obtained are combined with existing data from larger rock samples and compared with bulk analyses of soils to determine compositional ranges and dominant igneous rock types present in the regolith and breccias. Criteria are presented for the recognition of three types of igneous fragments in a limited sample of Apollo 14 material. Explanations for the differences between glass and rock compositions are discussed.

Steele, I. M.↗
NASA NTRS2004

Developing an Automated Science Analysis System for Mars Surface Exploration for MSL and Beyond

We are developing an automated science analysis system that could be utilized by robotic or human explorers on Mars (or even in remote locations on Earth) to improve the quality and quantity of science data returned. Three components of this system (our rock, layer, and horizon detectors) [1] have been incorporated into the JPL CLARITY system for possible use by MSL and future Mars robotic missions. Two other components include a multi-spectral image compression (SPEC) algorithm for pancam-type images with multiple filters and image fusion algorithms that identify the in focus regions of individual images in an image focal series [2]. Recently, we have been working to combine image and spectral data, and other knowledge to identify both rocks and minerals. Here we present our progress on developing an igneous rock detection system.

Gulick, V. C.↗
NASA NTRS1995

Cogenetic Rock Fragments from a Lunar Soil: Evidence of a Ferroan Noritic-Anorthosite Pluton on the Moon

The impact that produced North Ray Crater, Apollo 16 landing site, exhumed rocks that include relatively mafic members of the lunar ferroan anorthositic suite. Bulk and mineral compositions indicate that a majority of 2-4 mm lithic fragments from sample 67513, including impact breccias and monomict igneous rocks, are related to a common noritic-anorthosite precursor. Compositions and geochemical trends of these lithic fragments and of related samples collected along the rim of North Ray Crater suggest that these rocks derived from a single igneous body. This body developed as an orthocumulate from a mixture of cumulus plagioclase and mafic intercumulus melt, after the plagioclase had separated from any cogenetic mafic minerals and had become concentrated into a crystal mush (approximately 70 wt% plagioclase, 30 wt% intercumulus melt). We present a model for the crystallization of the igneous system wherein "system" is defined as cumulus plagioclase and intercumulus melt. The initial accumulation of plagioclase is analogous to the formation of thick anorthosites of the terrestrial Stillwater Complex; however, a second stage of formation is indicated, involving migration of the cumulus-plagioclase-intercumulus-melt system to a higher crustal level, analogous to the emplacement of terrestrial massif anorthosites. Compositional variations of the lithic fragments from sample 67513 are consistent with dominantly equilibrium crystallization of intercumulus melt. The highly calcic nature of orthocumulus pyroxene and plagioclase suggests some reaction between the intercumulus melt and cumulus plagioclase, perhaps facilitated by some recrystallization of cumulus plagioclase. Bulk compositions and mineral assemblages of individual rock fragments also require that most of the mafic minerals fortned in close contact with cumulus plagioclase, not as separate layers. The distribution of compositions (and by inference, modes) has a narrow peak at anorthosite and a broader, larger peak at noritic anoilhosite. Characteristics of the samples and their geochemical trends imply an origin in a system that was large relative to the (unknown) size of the impact that produced the breccias of ferroan noritic-anorthosite composition that were excavated later by the formation of North Ray Crater, and they appear to be consistent with an origin of the suite within a perched plagioclase cumulate. If the Moon's crust formed by accumulation of plagioclase in a magma ocean, ferroan noritic anothosite, formed as an orthocumulate, is an alternative to extensive adcumulus formation of ferroan anorthosite (greater than 90 vol% plagiclase). This provides a relatively mafic ferroan anorthositic component (approximately 15 vol% mafics), which is required by mass-balance models of compositions of polymict lunar-crustal materials. The inferred bulk composition of the system of cumulus plagioclase and intercumulus melt is similar to that of ferroan regolith breccia MacAlpine Hills 88104/5, a lunar-highland meteorite, and may represent a common and widespread component of the Moon's early highland crust.

Jolliff, B. L.↗
NASA NTRS1977

The geology of the Viking Lander 1 site

Stereo pictures show that Viking Lander 1 landed on volcanic terrain of undulating topography in the plains of Chryse. The bedrock is exposed along several ridge crests, and blocks are more numerous than can be attributed to impact ejecta. The presence of a variety of rock types suggests in situ weathering of extrusive and near-surface basaltic igneous rocks along a linear volcanic vent. Fine-grained sediment is present in drift complexes and isolated drifts. A small patch of fine-grained sediment slumped down one of the drift faces during the course of the Viking mission. Otherwise, no other morphological changes unrelated to spacecraft activity have been observed.

Binder, A. B.↗
NASA NTRS1980

Nature of the fossil evidence - Moon and meteorites

The nature of the fossil evidence to be found in extraterrestrial materials concerning the history of solar activity is reviewed. The various types of lunar rocks and meteorites containing evidence of exposure to solar radiations are distinguished, including igneous rocks, breccias, glassy agglutinates, single mineral crystals, carbonaceous meteorites, and the Antarctic meteorites, some of which fell to earth as much as a million years ago. The characteristic effects of energetic particles from space in materials are then examined, including ion implantation and surface radiation damage to a depth of several hundred A by the solar wind, radioactivity, electron trapping and track production induced by solar flares to depths from millimeters to centimeters, and spallation due to galactic cosmic rays at depths from centimeters to meters. Complications in the interpretation of radiation exposure histories represented by dynamic surface processes, the nonsolar origin of some trapped elements, and difficulties in determining the duration and epoch of surface exposure of individual crystals are also noted.

Walker, R. M.↗