Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High Pressure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

A regularized-interface method as a unified formulation for simulations of high-pressure multiphase flows

The injection of multi-species fluids into high-pressure and high-temperature environments beyond the species' critical points is commonly found in engineering applications. At these conditions, for immiscible species, both subcritical interfacial dynamics and supercritical mixing can coexist due to variations in temperature around the mixture critical point. The modeling of these complex transcritical phenomena for large-scale configurations is so far not possible. To address this issue, we propose the Regularized-Interface Method (RIM) as a unified formulation that can describe both sub- and supercritical processes as well as the transition between them. The proposed method is derived via filtering of the nanoscale interface-resolving formulation based on van der Waals' linear gradient theory. Thus, this approach allows for the consistent modeling of interfacial dynamics that vanishes at supercritical conditions, while significantly reducing the temporal and spatial resolution constraints of the original nanoscale formulation. The resulting RIM formulation is examined in interface-capturing simulations of sub-, trans-, and supercritical fuel injection processes, involving droplets and jets. Furthermore, these results highlight the importance of resolving spatio-temporal transitions from subcritical interfacial dynamics to supercritical mixing in high-pressure multiphase simulations, in contrast to commonly employed diffused-interface methods, where interfacial dynamics are often neglected.

Interface capturing↗
DOE OSTI2021

Structural, Vibrational, and Electronic Properties of 1D-TlInTe 2 under High Pressure: A Combined Experimental and Theoretical Study

Analogous to 2D layered transition-metal dichalcogenides, the TlSe family of quasi-one dimensional chain materials with the Zintl-type structure exhibits novel phenomena under high pressure. In the present work, we have systematically investigated the high-pressure behavior of TlInTe 2 using Raman spectroscopy, synchrotron X-ray diffraction (XRD), and transport measurements, in combination with first principles crystal structure prediction (CSP) based on evolutionary approach. We found that TlInTe2 undergoes a pressure-induced semiconductor-to-semimetal transition at 4 GPa, followed by a superconducting transition at 5.7 GPa (with T c = 3.8 K). An unusual giant phonon mode (A g ) softening appears at ~10–12 GPa as a result of the interaction of optical phonons with the conduction electrons. The high-pressure XRD and Raman spectroscopy studies reveal that there is no structural phase transitions observed up to the maximum pressure achieved (33.5 GPa), which is in agreement with our CSP calculations. In addition, our calculations predict two high-pressure phases above 35 GPa following the phase transition sequence as I4/mcm (B37) → Pbcm → Pm$\bar{3}$m (B2). Electronic structure calculations suggest Lifshitz (L1 & L2-type) transitions near the superconducting transition pressure. Furthermore, our findings on TlInTe 2 open up a new avenue to study unexplored high-pressure novel phenomena in TlSe family induced by Lifshitz transition (electronic driven), giant phonon softening, and electron–phonon coupling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Mechanical Property Evaluation of CuNb Composites Manufactured with High-Pressure Torsion

Copper is under consideration as the optimum material for both high heat flux applications and high pulsed magnets. One challenge is that copper has low strength which is problematic to deployment in these applications. One solution is to alloy copper with BCC elements to improve its mechanical properties. However, the limited solubility of the BCC elements in copper requires high deformation processes to be used in order to manufacture these 3D composites. Here, high energy ball milling combined with high pressure torsion was used to manufacture 3D Cu-Nb composites. After the consolidation the mechanical properties of the composites were measured using micro- and nanohardness testing at room and elevated temperature. The results indicated that after 10 turns during the high-pressure torsion consolidation, the mechanical properties of the composites were completely saturated displaying uniform properties across the manufactured disk. Performing the high pressure torsion at temperature further improved consolidation of the disk. The high temperature nanoindentation also indicated a change in the deformation mechanism between 200 and 500 ºC.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Metastable phase of UTe 2 formed under high pressure above 5 GPa

Uranium ditelluride (UTe 2 ) has attracted recent interest due to its unique superconducting properties, which include the potential for a topological odd-parity superconducting state. Recently, ac-calorimetry measurements under pressure indicate a change in the ground state of UTe 2 from superconducting to antiferromagnetic at 1.4 GPa. In this work, we investigate the effect of pressure on the crystal structure of UTe 2 up to 25 GPa at room temperature using x-ray diffraction. We find that UTe 2 , which at ambient conditions has an orthorhombic (Immm) structure, transforms to a body-centered tetragonal (I4/mmm) structure at 5 GPa in a quasihydrostatic neon (Ne) pressure-transmitting medium. In the absence of a pressure-transmitting medium, this transformation occurs between 5 and 8 GPa. The data were fit with a third-order Birch-Murnaghan equation of state resulting in values of B 0 = 46.0 ± 0.6 GPa , B' = 9.3 ± 0.5 (no pressure medium), and B 0 = 42.5 ± 2.0 GPa , B' = 9.3 (fixed) (neon pressure medium) for the Immm phase. For the I4/mmm phase, B 0 = 78.9 ± 0.5 GPa GPa and B' = 4.2 ± 0.1 (no pressure-transmitting medium), and B 0 = 70.0 ± 1.1 GPa and B' = 4.1 ± 0.2 (neon pressure medium). The high-pressure tetragonal phase is retained after decompression to ambient pressure, with approximately 30% remaining after 2 days. We argue that the observed phase transition into a higher-symmetry structure at P ~ 5 GPa (orthorhombic to tetragonal) is accompanied by an increase in the shortest distance between uranium atoms from 3.6 Å (orthorhombic) to 3.9 Å (tetragonal), which suggests localization of the 5ƒ electrons, albeit with a 10.7% decrease in volume.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Low-Pressure Electrochemical Synthesis of Complex High-Pressure Superconducting Superhydrides

There is great current interest in multicomponent superhydrides due to their unique quantum properties under pressure. A remarkable example is the ternary superhydride Li 2 MgH 16 computationally identified to have an unprecedented high superconducting critical temperature T c of ~470 K at 250 GPa. However, the very high synthesis pressures required remains a significant hurdle for detailed study and potential applications. In this Letter, we evaluate the feasibility of synthesizing ternary Li-Mg superhydrides by the recently proposed pressure-potential (P 2 ) method that uniquely combines electrochemistry and applied pressure to control synthesis and stability. Furthermore, the results indicate that it is possible to synthesize Li-Mg superhydrides at modest pressures by applying suitable electrode potentials. Using pressure alone, no Li-Mg ternary hydrides are predicted to be thermodynamically stable, but in the presence of electrode potentials, both Li 2 MgH 16 and Li 4 MgH 24 can be stabilized at modest pressures. Three polymorphs are predicted as ground states of Li 2 MgH 16 below 300 GPa, with transitions at 33 and 160 GPa. The highest pressure phase is superconducting, while the two at lower pressures are not. Our findings point out the potentially important role of the P 2 method in controlling phase stability of complex multicomponent superhydrides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Intercalation And High-Pressure Effects On Structural Phase Transitions In Layered As x P 1-x Alloys

This project was aimed at understanding the role of composition, intercalation, and high pressure on the structural evolution of black phosphorous (BP) and layered arsenic phosphorous alloys, As y P 1-y . Under normal conditions, BP is the most stable phase of phosphorous, known as the α-phase, characterized by an orthorhombic honeycomb puckered crystal structure with the Cmca space group. On the other hand, the most stable phase of arsenic is its β-phase, known as gray arsenic (g-As), which has a rhombohedral buckled layered crystal structure with the R3m space group. In a wide range of compositions (y < 0.83), the arsenic phosphorous alloys form the α-phase, known as black arsenic phosphorous (b-As y P 1-y ) with a similar structure to BP. The project was aimed at the synthesis of BP and b-As y P 1-y with different compositions and at studying the structural evolution of these materials during intercalation with alkali metal (especially Li), and under high-pressure conditions. The main goals were to gain a better understanding of these processes and structural changes taking place under these conditions. In particular, the project was aimed at addressing whether such conditions could induce a structural transition between the α- and β-phases. For this, a series of systematic in-situ studies were conducted, including electrochemical lithium intercalation in an in-situ electrochemical cell, and high-pressure experiments in a diamond anvil cell (DAC). Overall, both types of experiments have shown that above a certain composition-dependent threshold level of intercalation or high pressure, the system undergoes phase segregation rather than phase transition. Specifically, the segregation of the excess arsenic was observed, and a single-phase system of b-As y P 1-y transformed into a two-phase system consisting of b-As y P 1-y and g-As, through the following process: 1∗(b-As y P 1-y ) → 1∗(b As y-δ P 1-y ) + δ∗(g-As). Also, the study showed that intercalation and high-pressure are two competing rather than synergistic processes causing at least a partial cancelation of these two factors

36 MATERIALS SCIENCE↗
DOE OSTI2026

High pressure effects on EBC systems in high temperature environments

Environmental barrier coatings (EBCs) are designed to protect SiCfiber/SiCmatrix ceramic matrix composites (CMCs) in turbine engines by mitigating wear in high-temperature water vapor environments. The failure of EBCs is frequently attributed to the accelerated oxidation of the silicon bond coating layer when exposed to high-temperature steam, leading to the formation of a thickened thermally grown oxide (TGO). TGO growth increases interfacial stress, weakens adhesion, and results in coating spallation. Understanding the impact of high-temperature oxidation of EBC systems is essential for developing accurate lifespan models for turbine components, although pressurized oxidation testing is extremely sparse in the open literature. In this work, oxidation tests were performed on rare earth silicate EBCs coated onto SiC substrates under increased pressure conditions. The coated specimens were tested at 1100°C, 1200°C, and 1300°C at both 1 atm and 10 atm total pressure in steam environments. Subsequent characterization focused on the microstructural evolution of the EBC/Si/SiC system. The experimental findings indicated that TGO behavior is dependent on high-pressure conditions, with elevated pressure leading to an increase in oxide scale thickness and modifications in its morphology.

Ardrey, Kristyn [ORNL] (ORCID:0000000184407796)↗
DOE OSTI2022

Sound velocity and compressibility of melts along the hedenbergite (CaFeSi2O6)-diopside (CaMgSi2O6) join at high pressure : Implications for stability and seismic signature of Fe-rich melts in the mantle

Iron-rich silicate melts play an important role in the magmatic history of the Earth and the 16 Moon. However, their elastic properties at high pressures, especially the sound velocity, are poorly 17 understood. Here we determined the ultrasonic sound velocity for the first time of a hedenbergite 18 (Hd, CaFeSi2O6) melt and a melt mixture of 50 mol% hedenbergite + 50 mol% diopside (Hd50Di50) 19 at high pressure and temperature conditions up to 6 GPa and 2329 K, using high-pressure ultrasonic 20 technique combined with synchrotron radiation in a multi-anvil apparatus. Our results show that 21 Fe can significantly reduce the sound velocity while increase the density of silicate melts. 22 Comparing the Di, Hd, and Hd50Di50 melts, we find that the sound velocity does not mix linearly 23 2 for melts in the Hd-Di join, whereas the density for Hd-Di melts at high pressures can be well-24 described by linear mixing. Combined with melt geometry and melt compaction models, we 25 applied our results to study the stability and seismic signature of Fe-rich silicate melts in the Earth’s 26 upper mantle. For the low-velocity zone (LVZ) in mantle asthenosphere, although the degree of 27 seismic velocity reduction can be explained by the presence of a small amount of partial melt 28 distributed in film/band geometry along grain boundaries, Fe-rich melts formed at this depth are 29 unlikely to be gravitationally stable, but may be dynamically unextractable if the melt supply is 30 continuous. For the low-velocity layer (LVL) above the mantle transition zone, the presence of Fe-31 rich melts (with FeO>~10 wt%) distributed in textural equilibrium with the ambient mantle is a 32 plausible explanation.

diopside↗
DOE OSTI2023

Superconductivity Observed in Tantalum Polyhydride at High Pressure

We report experimental discovery of tantalum polyhydride superconductor. It was synthesized under high-pressure and high-temperature conditions using diamond anvil cell combined with in situ high-pressure laser heating techniques. The superconductivity was investigated via resistance measurements at pressures. The highest superconducting transition temperature T c was found to be ∼ 30 K at 197 GPa in the sample that was synthesized at the same pressure with ∼ 2000 K heating. The transitions are shifted to low temperature upon applying magnetic fields that support the superconductivity nature. The upper critical field at zero temperature μ 0 H c2 (0) of the superconducting phase is estimated to be ∼ 20 T that corresponds to Ginzburg–Landau coherent length ∼ 40 Å. Our results suggest that the superconductivity may arise from I 4 ¯ 3 d phase of TaH 3 . It is, for the first time to our best knowledge, experimental realization of superconducting hydrides for the VB group of transition metals.

Physics↗
DOE OSTI2020

The cold high-pressure approach to hydrogen delivery

In view of the very expensive and wasteful nature of today's approaches to H 2 delivery, in this work we explore the possibility of transporting cold (200 K) high pressure (875 bar) H 2 in thermally insulated trailers and dispensing H 2 directly from the trailer, with the potential to eliminate station compressor, cascade, and refrigerator, leading to major reductions in station complexity, maintenance, electricity consumption, and cost, while improving functionality by enabling essentially unlimited back to back refuels, and improving safety due to reduced H 2 expansion energy at low temperature. Detailed techno-economic analysis shows promise for substantial delivery cost reductions through cold high pressure H 2 dispensed directly from the trailer. Results indicate that: (1) Terminal operations for cold high pressure H 2 delivery are $\$$0.32/kg H 2 more expensive than for 350 bar compressed gas delivery (today's lowest cost H 2 delivery technology) due to higher level of pressurization (to 1000 bar) and chilling needs (to 165 K). (2) Trailer cost drops slightly ($\$$0.73 vs. $\$$0.81/kg H 2 for a 350 bar trailer) due to increased capacity (1035 kg H 2 delivered vs. 700 kg) compensating for increased capital cost ($\$$906,900 for cold high pressure H 2 vs. $\$$634,000 for 350 bar trailer). (3) Cold hydrogen delivery presents major advantages in fueling station cost, reduced from $\$$1.27 to $\$$0.46/kg H 2 due to elimination of major system components: compressor, cascade, and chiller. (4) Total compression cost (terminal + station) drops from $\$$0.92/kg H 2 ($\$$0.32 terminal and $\$$0.60 station) for 350 bar trailers to $\$$0.55/kg H 2 (all at the terminal) for cold high pressure H 2 . (5) Elimination of small-scale station compressors is the main contributor to reduced delivery cost due to their inefficiency, capital expense, and maintenance needs. In summary, total delivery cost reduction vs. 350 bar trailer equals $\$$0.58/kg H 2 (from $\$$2.96 to 2.38/kg H 2 ), equivalent to 24% of the total delivery cost. This large cost advantage will improve the economics of H 2 vehicles facilitating the transition to a future of zero emission transportation.

08 HYDROGEN↗
DOE OSTI2023

High-Pressure Structural and Thermodynamic Properties of Cerium Orthosilicates (CeSiO 4 )

Pressure-induced phase transitions from the zircon structure-type (I4 1 /amd) to the scheelite structure type (I4 1 /a) are known for many ternary oxides systems (ABO 4 ). In this work, we present the first high-pressure study on synthetic stetindite (CeSiO 4 ) by a combination of in situ high-pressure synchrotron powder X-ray diffraction up to 36 GPa, implemented with and without dual sided laser heating, and in situ high-pressure Raman spectroscopy up to 43 GPa. Two phase transitions were identified: zircon to a high-pressure low-symmetry (HPLS) phase at 15 GPa and then to a scheelite at 18 GPa. The latter from HPLS scheelite phase was found irreversible; i.e., scheelite is fully quenchable at ambient conditions, as in other zircon-type phases. The bulk moduli (K 0 ) of stetindite, HPLS, and high-pressure scheelite phases were determined, respectively, as 171(5), 105(4), and 221(40) GPa by fitting to a second-order Birch-Murnaghan equation of state. The pressure derivatives of vibrational modes and Gru''neisen parameters of the zircon-structured polymorph are similar to those of other orthosilicate minerals. In conclusion, due to the larger ionic radii of Ce 4+ , with respect to Zr 4+ , stetindite was found to possess a softer bulk modulus and undergo the phase transitions at a lower pressure than zircon (ZrSiO 4 ), such observations are consistent with what were found in coffinite (USiO 4 ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Anisotropic Structural Collapse of Mg 3 Sb 2 and Mg 3 Bi 2 at High Pressure

Alloys between Mg 3 Sb 2 and Mg 3 Bi 2 have recently been shown to be exceptional thermoelectric materials due in part to their anomalously low thermal conductivity. In the present study, in situ high-pressure synchrotron X-ray diffraction was used to investigate the structure and bonding in Mg 3 Sb 2 and Mg 3 Bi 2 at pressures up to 50 GPa. Our results confirm prior predictions of isotropic in-plane and out-of-plane compressibility but reveal large disparities between the bond strength of the two distinct Mg sites. Using single-crystal diffraction, we show that the octahedral Mg–Sb bonds are significantly more compressible than the tetrahedral Mg–Sb bonds in Mg 3 Sb 2 , which lends support to prior arguments that the weaker octahedral Mg bonds are responsible for the anomalous thermal properties of Mg 3 Sb 2 and Mg 3 Bi 2 . Further, we report the discovery of a displacive and reversible phase transition in both Mg 3 Sb 2 and Mg 3 Bi 2 above 7.8 and 4.0 GPa, respectively. Furthermore, the transition to the high-pressure structure involves a highly anisotropic volume collapse, in which the out-of-plane axis compresses significantly more than the in-plane axes. Single-crystal diffraction at high pressure was used to solve the monoclinic high-pressure structure ( C 2/ m ), which is a distorted variant of the ambient-pressure structure containing four unique Mg coordination environments.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Viscosity Measurements at High Pressures: A Critical Appraisal of Corrections to Stokes' Law

Abstract Fluids and melts in planetary interiors significantly influence geodynamic processes from volcanism to global‐scale differentiation. The roles of these geofluids depend on their viscosities ( η ). Constraining geofluid η at relevant pressures and temperatures relies on laboratory‐based measurements and is most widely done using Stokes' Law viscometry with falling spheres. Yet small sample chambers required by high‐pressure experiments introduce significant drag on the spheres. Several correction schemes are available for Stokes' Law but there is no consensus on the best scheme(s) for high‐pressure experiments. We completed high‐pressure experiments to test the effects of (a) the relative size of the sphere diameter to the chamber diameter and (b) the top and bottom of the chamber, that is, the ends, on the sphere velocities. We examined the influence of current correction schemes on the estimated viscosity using Monte Carlo simulations. We also compared previous viscometry work on various geofluids in different experimental setups/geometries. We find the common schemes for Stokes' Law produce statistically distinct values of η . When inertia of the sphere is negligible, the most appropriate scheme may be the Faxén correction for the chamber walls. Correction for drag due to the chamber ends depends on the precision in the sinking distance and may be ineffective with decreasing sphere size. Combining the wall and end corrections may overcorrect η . We also suggest the uncertainty in η is best captured by the correction rather than propagated errors from experimental parameters. We develop an overlying view of Stokes' Law viscometry at high pressures.

Geochemistry & Geophysics↗
DOE OSTI2023

Vertical high-pressure rinse machine

A high-pressured rinsing system comprises a base including a liquid reservoir, a rotation motor housing including a rotation motor adapted to rotate a spray wand attached, and extending vertically upward from, the rotation motor housing and base, a linear rail support frame attached the base and including a vertical motor and associated linear rail attached thereto, a cavity mounting plate attached to the linear rail, wherein vertical movement of the linear rail causes vertical movement of the cavity mounting plate over the base; and at least one door and a plurality of side panels mounting to an enclosure support frame, wherein the enclosure support frame is mounted and secured to the linear rail support frame and base to create an enclosure around the spray wand and linear rail.

Ring, Timothy J.↗
DOE OSTI2022

High Temperature, High Pressure Stability of Aqueous Foams for Potential Application in Enhanced Geothermal System (EGS)

Enhanced Geothermal Systems (EGS) are typically constructed by injecting high-pressure water into deep hot dry rocks (HDR) under carefully controlled conditions to create new or re-open existing fractures, which usually uses an immense quantity of water. In lieu, a more sustainable technique is to utilize aqueous foams as fracturing fluid to reduce water consumption and waste-water treatments of conventional hydraulic fracturing. Although foam-based fracturing has shown promising results in oil and gas industries, its feasibility is not demonstrated in EGS conditions that usually involve high temperature and high pressures. One potential barrier of utilizing foams in EGS applications is that foams are thermodynamically unstable and will become more unstable with increasing temperature due to liquid drainage, bubble coarsening, and coalescence. This work focuses on evaluation of the stability of selected aqueous foams under high-temperature and high-pressure conditions. Specifically, foams generated with surfactant alfa olefin sulfonate (AOS) were studied at temperature up to 200oC, while the pressure ranged between 100 psi and 1000 psi. The effect of additional stabilizing agents was also examined, including guar gum, bentonite clay, borate salt crosslinker, silicon dioxide nanoparticles (SiO2), and graphene oxide (GO) dispersion. Results showed that the stabilizing agents can enhance the foam thermal stability. Foams made with AOS and the borate salt crosslinker exhibited the longest half-life of 20 min at 200°C when the pressure was at 1000 psi. Data fitting showed that foam stability decreased exponentially as temperature increased. On the other hand, pressure increased the foam half-life which followed a power model. This study indicates that it may be possible to obtain highly stable foams at high-temperature and high-pressure conditions with appropriate stabilizing agents.

Thakore, Viren↗
DOE OSTI2020

Neutron diffraction study of magnetic ordering in high pressure phases of rare earth metal holmium

The magnetic ordering in rare earth metals is well established for ambient pressure crystal structures, however, little is known about the magnetic ordering in their corresponding high-pressure crystalline modifications. Holmium (Ho) was studied in a large-volume diamond anvil cell at the Spallation Neutron Source to high-pressure up to 20 GPa and to low-temperature to 10 K. We have conducted two independent high-pressure low-temperature experiments under non-hydrostatic and quasi-hydrostatic pressure conditions respectively. The ambient pressure hexagonal close packed (hcp) phase of holmium shows two magnetic transitions below 10 GPa one to an incommensurate Antiferromagnetic (AFM) phase and another to a conical-Ferromagnetic (c-FM) phase. In contrast, alpha-Samarium-type (α-Sm) phase above 10 GPa and the double hexagonal close packed (dhcp) phase above 19 GPa show only one FM transition marked by the appearance of a magnetic peak at 3 Å and the concurrent enhancement of nuclear peaks below 30 K. Finally, these new transitions observed by neutron diffraction can be accounted by a commensurate superlattice formation along c-axis in both the α-Sm-type phase and the dhcp phase.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Superstoichiometric Alloying of H and Close‐Packed Fe‐Ni Metal Under High Pressures: Implications for Hydrogen Storage in Planetary Core

Although high pressure enables alloying between hydrogen and iron, hydrogen-to-iron molar ratio (H/Fe) so far found in experiments is mostly limited to 1 in the close-packed iron metal under high pressure. We report a H/(Fe + Ni) ratio of 1.8 ± 0.1 from (Fe,Ni)H x (or x ≥ 1.8) quenched from liquid, exceeding the amounts so far reported for densely packed Fe alloys. From the metastable behavior of the frozen (Fe,Ni)Hx liquid during decompression, we infer that the amount is a lower bound and therefore even a greater amount of H can be dissolved in the liquid part of Fe-rich cores of planets. The significant H storage capacity of liquid Fe-Ni alloy is important to consider for potential storage of H in the interiors of low-density planets as well as rocky planets.

58 GEOSCIENCES↗
DOE OSTI2023

High-pressure phase of cold-compressed bulk graphite and graphene nanoplatelets

Here, we have studied the high-pressure vibrational and structural behavior of bulk graphite and graphene nanoplatelets at room temperature by means of high-pressure Raman spectroscopic and x-ray diffraction probes. We have detected a clear pressure-induced structural transition in both materials, evidenced by the appearance of new Bragg peaks and Raman features, deviating from the starting hexagonal graphitic structure. The high-pressure phase is identified as a partially disordered orthorhombic structure, consisting of mixed sp 2 - and sp 3 -type bonding. Our experimental findings serve as direct evidence for the existence of a metastable transient modification in cold compressed carbon, lying between the sp 2 -type graphite and sp 3 -type diamond allotropes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗