Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Helical plasma”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Coil optimization for quasi-helically symmetric stellarator configurations

Filament-based coil optimizations are performed for several quasi-helical stellarator configurations, beginning with the one from Landreman & Paul ( Phys. Rev. Lett. , vol. 128, 2022, 035001), demonstrating that precise quasi-helical symmetry can be achieved with realistic coils. Several constraints are placed on the shape and spacing of the coils, such as low curvature and sufficient plasma–coil distance for neutron shielding. The coils resulting from this optimization have a maximum curvature 0.8 times that of the coils of the Helically Symmetric eXperiment (HSX) and a mean squared curvature 0.4 times that of the HSX coils when scaled to the same plasma minor radius. When scaled up to reactor size and magnetic field strength, no fast particle losses were found in the free-boundary configuration when simulating 5000 alpha particles launched at $3.5\,\mathrm {MeV}$ on the flux surface with a normalized toroidal flux of $s=0.5$ . An analysis of the tolerance of the coils to manufacturing errors is performed using a Gaussian process model, and the coils are found to maintain low particle losses for smooth, large-scale errors up to amplitudes of approximately $0.15\,\mathrm {m}$ . Another coil optimization is performed for the Landreman–Paul configuration with the additional constraint that the coils are purely planar. Visual inspection of the Poincaré plot of the resulting magnetic field-lines reveal that the planar modular coils alone do a poor job of reproducing the target equilibrium. Additional non-planar coil optimizations are performed for the quasi-helical configuration with $5\,\%$ volume-averaged plasma beta from Landreman et al. ( Phys. Plasma , vol. 29, issue 8, 2022, 082501), and a similar configuration also optimized to satisfy the Mercier criterion. The finite beta configurations had larger fast-particle losses, with the free-boundary Mercier-optimized configuration performing the worst, losing approximately $5.5\,\%$ of alpha particles launched at $s=0.5$ .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1989

Formation and eruption of solar prominences

A model for the magnetic field associated with solar prominences is considered. It is shown that flux cancellation at the neutral line of a sheared magnetic arcade leads to the formation of helical field lines which are capable, in principle, of supporting prominence plasma. A numerical method for the computation of force-free, canceling magnetic structures is presented. Starting from an initial potential field we prescribe the motions of magnetic footpoints at the photosphere, with reconnection occurring only at the neutral line. As more and more flux cancels, magnetic flux is transferred from the arcade field to the helical field. Results for a particular model of the photospheric motions are presented. The magnetic structure is found to be stable: the arcade field keeps the helical field tied down at the photosphere. The axis of the helical field moves to larger and larger height, suggestive of prominence eruption. These results suggest that prominence eruptions may be trigered by flux cancellation.

Van Ballegooijen, A. A.↗
DOE OSTI2023

Magnetic field evolution and reconnection in low resistivity plasmas

The mathematics and physics of each of the three aspects of magnetic field evolution—topology, energy, and helicity—are remarkably simple and clear. When the resistivity η is small compared to an imposed evolution, a/v , timescale, which means $R$ m ≡ μ 0 va/η $\gg$ 1, magnetic field-line chaos dominates the evolution of field-line topology in three-dimensional systems. Chaos has no direct role in the dissipation of energy. A large current density, j η ≡ vB/η, is required for energy dissipation to be on a comparable timescale to the topological evolution. Nevertheless, chaos plus Alfvén wave damping explain why both timescales tend to be approximately an order of magnitude longer than the evolution timescale a/v. Magnetic helicity is injected onto tubes of field lines when boundary flows have vorticity. Chaos can spread but not destroy magnetic helicity. Resistivity has a negligible effect on helicity accumulation when $R$ m $\gg$ 1. Helicity accumulates within a tube of field lines until the tube erupts and moves far from its original location.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Plasma production and ion heating systems for the Material Plasma Exposure eXperiment

Plasma production and ion heating in the Material Plasma Exposure eXperiment (MPEX), whose design is nearing completion, is accomplished using continuous wave RF power with average power density up to 1.6 MW/m2 at the plasma interface. Plasma is produced using helicon waves coupled through a single helical antenna at 13.56 MHz with power supplied by three 100 kW fixed-frequency RF generators feeding a power combiner network followed by the matching network and launcher. The helicon source can utilize various gasses including hydrogen, deuterium, and helium, with a magnetic field strength in the source region up to 0.2 T, and maximum device |B| of 2.5 T. Power is coupled to ions via ion cyclotron heating at the fundamental resonance using a pair of phased helical antennas operating in the frequency range 4-9 MHz, that launch waves towards the resonance from the antenna region where ω > ωci. ICH power is supplied by a single 500 kW tunable RF transmitter through a 90° power splitter and matching/decoupling network. In the case of both the helicon and ICH systems the antennas are located external to the vacuum, with power transferred through novel water-cooled coaxial vacuum windows consisting of fused quartz outer cylinders and silicon nitride inner cylinders with forced convection water cooling between them. The antenna enclosures are pressurized with dry air to 3 bar absolute for voltage standoff.Several 3-D COMSOL models have been created to simulate the two systems. A model of the helicon region utilizing a cold plasma dielectric tensor with accurate magnetic field and realistic plasma density profiles has been used to calculate the plasma loading/complex antenna input impedance at the launcher feed for various ne and |B| values, for the purpose of estimating power handling. It also incorporates the geometry of all launcher structures relevant to this determination. A still more detailed model of the launcher together with a lossy dielectric plasma surrogate has been used to determine RF electric field values and power losses in the device components.Similar models have been produced to predict the performance and power handling of the ICH launcher. For this device the impedance matrix of the two-element antenna array is calculated using a warm plasma model, necessary to properly determine the wave propagation and absorption.

Goulding, Richard↗
DOE OSTI2021

Fusion gain from cylindrical liner-driven implosions of field reversed configurations

MagLIF experiments [M.R. Gomez et al., Phys. Plasmas 22, 056306 (2015)] on Z have demonstrated the basic principles of Magneto-Inertial Fusion (MIF) for wall confined plasmas. Other MIF schemes have been proposed based on the liner implosion of closed field magnetically confined plasmas such as Field Reversed Configurations (FRCs) [T. P. Intrator et al., Phys. Plasmas 15, 042505 (2008)]. We present a semi-analytical model of liner driven FRC implosions that predicts the fusion gain of such systems. The model predicts a fusion gain near unity for an FRC imploded by a liner driven by the Z Machine. We show that FRCs could be formed and imploded at the Z facility using the AutoMag liner concept [S. A. Slutz et al., Phys. Plasmas 24, 012704 (2017)]. Furthermore, an initial bias magnetic field can be supplied by the external magnets used in MagLIF experiments. The reverse field is then supplied by an AutoMag liner, which has helical conducting paths imbedded in an insulating substance. Experiments [Shipley et al., Phys. Plasmas 26, 052705 (2019)] have demonstrated that AutoMag can generate magnetic fields greater than 30 Tesla inside of the liner. We have performed 2D Radiation MHD simulations of the formation and implosion of an FRC, which are in good agreement with the analytical model. The FRC formation process could be studied on small pulsed power machines delivering about 1 MA.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

High-frequency heating of the solar wind triggered by low-frequency turbulence

The fast solar wind’s high speeds and non-thermal features require that considerable heating occurs well above the Sun’s surface. Two leading theories seem incompatible: low-frequency ‘Alfvénic’ turbulence, which transports energy outwards and is observed ubiquitously by spacecraft but seems insufficient to explain the observed dominance of ion over electron heating; and high-frequency ion-cyclotron waves, which explain the non-thermal heating of ions but lack an obvious source. Here we argue that the recently proposed ‘helicity barrier’ effect, which limits electron heating by inhibiting the turbulent cascade of energy to the smallest scales, can unify these two paradigms. Our six-dimensional simulations show how the helicity barrier causes the large-scale energy to grow through time, generating small parallel scales and high-frequency ion-cyclotron-wave heating from low-frequency turbulence, while simultaneously explaining various other long-standing observational puzzles. Furthermore, the predicted causal link between plasma expansion and the ion-to-electron heating ratio suggests that the helicity barrier could contribute to key observed differences between fast and slow wind streams.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Chirality transfer and chiral turbulence in gauge theories

Chirality transfer between fermions and gauge fields plays a crucial role for understanding the dynamics of anomalous transport phenomena such as the Chiral Magnetic Effect. In this proceeding we present a first principles study of these processes based on classical-statistical real-time lattice simulations of strongly coupled QED (e 2 N f = 64). Furthermore, our simulations demonstrate that a chirality imbalance in the fermion sector triggers chiral plasma instabilities in the gaugefield sector, which ultimately lead to the generation of long range helical magnetic fields via an self-similar turbulent cascade of the magnetic helicity.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1995

Evolution of Photon and Particle Spectra in Compact, Luminous Objects

Physical conditions in the radiating plasma in the cores of radio-strong quasars and active galactic nuclei cannot be derived from observations until the effects of relativistic aberration are understood. This requires determining both the bulk flow speeds and any wave or signal speed in the parsec-scale nuclear jets. In this project we studied several aspects of such waves. We considered constraints on jet deceleration by mass pickup, and found that bolometric luminosities of the active nuclei cannot constrain core jet speeds usefully. We also simulated observations of ballistic, helical trajectories and helical waves moving directly outwards along the jet. We found that ballistic trajectories are not allowed by the data; the helical features seen are very likely to be helical waves. We believe these are waves propagating in the jet plasma. To this end, we studied waves propagating in relativistic pair plasma jets. In particular, we undertook a program whose goal was to determine the nature of waves which can propagate in relativistic pair plasmas, and how such waves propagating in streaming jet plasma would be observed by an external observer. We developed the possibility of using pulsars as test cases for our models; this takes advantage of new technology in pulsar observations, and the similarity of the physical conditions in the pulsar magnetosphere to the dense, relativistic pair plasmas which exist in radio-strong quasars.

Eilek, Jean A.↗
DOE OSTI2020

Theory of edge localized mode suppression by static resonant magnetic perturbations in the DIII-D tokamak

According to a recent paper [Hu et al ., Phys. Plasmas 26, 120702 (2019)], mode penetration at the top of the pedestal is a necessary and sufficient condition for the suppression of edge localized modes (ELMs) by a resonant magnetic perturbation (RMPs) in an H-mode tokamak discharge. This paper employs asymptotic matching theory to model a particular DIII-D discharge in which ELMs were suppressed by an externally generated, static, n ¼ 2, RMP whose amplitude was modulated at a frequency of 1 Hz. It is demonstrated that the response of the plasma to the applied RMP, in the immediate vicinities of the rational (i.e., resonant) surfaces, is governed by nonlinear, rather than by linear, physics. This is the case because the magnetic island widths associated with driven reconnection exceed the linear layer widths, even in cases where driven reconnection is strongly suppressed by plasma rotation. The natural frequency at a given rational surface (i.e., the helical frequency at which the locally resonant component of the RMP would need to propagate in order to maximize driven reconnection) is found to be offset from the local E B frame in the ion diamagnetic direction. The size of the offset is mostly determined by neoclassical poloidal rotation. Finally, the predictions of a fully nonlinear plasma response model are found to be broadly consistent with the DIII-D experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

A reduced-turbulence regime in the Large Helical Device upon injection of low-Z materials powders

Abstract Recently an improved confinement regime, characterized by reduced turbulent fluctuations has been observed in the Large Helical Device upon the injection of boron powder into the plasma (Nespoli et al 2022 Nat. Phys. 18 350–56). In this article, we report in more detail the experimental observations of increased plasma temperature and the decrease of turbulent fluctuations across the plasma cross section, on an extended database. In particular, we compare powders of different materials (B, C, BN), finding similar temperature improvement and turbulence response for the three cases. Modeling of the powder penetration into the plasma and of neoclassical electric field and fluxes support the interpretation of the experimental results. Additionally, we report evidence of the temperature improvement increasing with powder injection rates and decreasing for both increasing density and heating power. Though, plasma turbulence response varies depending on the initial conditions of the plasma, making it difficult to draw an inclusive description of the phenomenon.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Initial operation and data processing on a system for real-time evaluation of Thomson scattering signals on the Large Helical Device

A scalable system for real-time analysis of electron temperature and density based on signals from the Thomson scattering diagnostic, initially developed for and installed on the NSTX-U experiment, was recently adapted for the Large Helical Device (LHD) and operated for the first time during plasma discharges. During its initial operation run, it routinely recorded and processed signals for four spatial points at the laser repetition rate of 30 Hz, well within the system's rated capability for 60 Hz. We present examples of data collected from this initial run and describe subsequent adaptations to the analysis code to improve the fidelity of the temperature calculations.

Thomson scattering, real-time, LHD, plasma diagnos↗
DOE OSTI2023

Principal Challenges in Toroidal Magnetic Confinement Fusion Systems

Research efforts toward a practical and economical magnetically confined fusion power source have made steady progress over the years. Today, the principal approaches to confining a hot plasma of Deuterium and Tritium ions long enough for a significant frac/on to undergo thermonuclear burn employ toroidal geometries. Such geometries are attractive because charged particles are tightly bound around the field lines, undergoing locally helical orbits as they travel along those lines. In the core regions of the plasma, the field lines have no connection to the material surfaces making up the interior of the vacuum vessel, so that plasma confinement times can be long enough for significant thermonuclear burnup via fusion reactions to take place. For good confinement, the geometry of the field lines must be such that nested field lines (which lie on nested flux surfaces) twist around the toroidal axis (a quasi-circular line that approximately lies in the center of the confined plasma) at rates that vary based on their distance from that axis. The rotational transform (or field line pitch), iota/2π , is defined as the number of poloidal transits per single toroidal transit of a field line on a toroidal flux surface.

42 ENGINEERING↗
DOE OSTI2024

Novel intrinsic helical cores and MHD dynamo flux pumping evidence in DIII-D

Evidence of a MHD dynamo brought about by intrinsic helical core structures in negative triangularity (NT) and ITER baseline scenario (IBS) plasmas demonstrates paths to operating tokamaks without seeds for deleterious global MHD modes. A stationary sawtooth- and edge localized mode-free state maintains high performance for long durations in a strong NT shape in the DIII-D tokamak. Disparity between minimum safety factor values predicted by magnetic flux diffusion theory and derived from experiment suggests anomalous flux diffusion by an MHD dynamo, driven by flows associated with quasi-interchange modes. Stability calculations with the GATO code find NT and IBS experimental equilibria unstable to quasi-interchange modes, in agreement with observed saturated activity. IBS discharges with similar magnetic winding structure occupy robust helical core states following a transition from sawtooth instabilities. These states agree with prior modeling of helical core bifurcation thresholds with the VMEC equilibrium code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Islands and current singularities in quasisymmetric toroidal plasmas

The presence of current singularities in a quasisymmetric magnetic field is explored. Quasisymmetry is shown effective in isolating Pfirsch–Schlüter singularities, to leading order, to a single magnetic surface resonant with the helicity of the symmetry. The effects of pressure driven currents are analyzed, indicating that exclusion of this surface from the plasma volume reduces the potential opening of islands but does not generally eliminate them completely due to higher order asymmetric geometric effects. These three-dimensional effects are contained in quasisymmetry and indicate the complexity of finding consistent solutions and their potential sensitivity. The δ-function current singularities show a distinct quasisymmetric behavior only when the higher-order Fourier content of B is relevant for the resistive stability parameter D R (not included in leading-order near-axis expansions). In such scenarios, quasisymmetry proves advantageous, both in simplicity and avoidance of amplification by low-order rational surfaces.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Resilient stellarator divertor characteristics in the Helically Symmetric eXperiment

Resilient divertor features connected to open chaotic edge structures in the Helically Symmetric eXperiment are investigated. For the first time, an expanded vessel wall was considered that would give space for implementation of a physical divertor target structure. The analysis was done for four different magnetic configurations with very different chaotic plasma edges. A resilient plasma wall interaction pattern was identified across all configurations. This manifests as qualitatively very similar footprint behavior across the different plasma equilibria. Overall, the resilient field lines of interest with high connection length L C lie within a helical band along the wall for all configurations. This resiliency can be used to identify the best location of a divertor. The details of the magnetic footprint’s resilient helical band is subject to specific field line structures which are linked to the penetration depth of field lines into the plasma and directly influence the heat and particle flux patterns. The differences arising from these details are characterized by introducing a new metric, the minimum radial connection min $(\delta_N)$ of a field line from the last closed flux surface. The relationship, namely the deviation from a scaling law, between min $(\delta_N)$ and L C of the field lines in the plasma edge field line behavior suggests that the field lines are associated with structures such as resonant islands, cantori, and turnstiles. This helps determine the relevant magnetic flux channels based on the radial location of these chaotic edge structures and the divertor target footprint. These details will need to be taken into account for resilient divertor design.

divertor↗
DOE OSTI2022

A resistive MHD model and simulation on plasma flow evolution in the presence of resonant magnetic perturbation in a tokamak

Nonaxisymmetric magnetic fields such as the intrinsic error field and the externally applied resonant magnetic perturbation (RMP) in a tokamak are known to influence the plasma momentum transport and flow evolution through plasma response, which itself strongly depends on the plasma flow as well. The nonlinear interaction between plasma response and flow has been previously modeled in the conventional error field theory with the “no-slip” condition, which has been recently extended to allow the “free-slip” condition. In this work, we further target this specific process and numerically simulate the nonlinear plasma response and flow evolution in the presence of a single-helicity RMP in a circular-shaped model tokamak configuration, based on the full resistive MHD model in the initial-value code NIMROD. Time evolution of the parallel (to k) flow or “slip frequency” profile and its asymptotic steady state obtained from the NIMROD simulations are compared with both conventional and extended nonlinear response theories. Here, k is the wave vector of the propagating island. Good agreement with the extended theory with free-slip condition has been achieved for the parallel flow profile evolution in response to RMP in all resistive regimes, whereas the difference from the conventional theory with the no-slip condition tends to diminish as the plasma resistivity approaches zero.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Towards improved neutral exhaust in the HSX stellarator

To improve our knowledge of neutral exhaust in non-resonant divertors, a particle exhaust study is performed for the Helically Symmetric eXperiment (HSX). The chaotic magnetic field topology in the plasma edge is examined with connection lengths and Lyapunov exponents. Plasma flux tubes are identified and these flux tubes deposit particles onto plasma facing components. This helps determine the areas where neutrals are generated and provides guidance on where to put baffles. As shown using EMC3-EIRENE simulations, the introduction of baffles can help increase the neutral pressure at and away from the strike line locations. Furthermore, it is demonstrated that baffle design cannot only be based on placing structures at locations with small connection lengths.

Baffles↗
DOE OSTI2026

Progress in Extending the High-Temperature Plasma Regime in the LHD

In this paper, we show the expansion of the high-temperature regime and related physical phenomena in the Large Helical Device (LHD). At the LHD, we have developed a high-temperature operational regime for both ion (T i ) and electron (T e ) temperatures through understanding the physical characteristics of high-temperature plasma, the enhancement of plasma heating, and the development of technical methods such as wall recycling control and impurity control. In particular, the formation of the ion internal transport barrier (i-ITB) and electron internal transport barrier (e-ITB) in the plasma core region is the key to improving plasma performance. In addition, the deuterium experiment that began in 2017 showed that, due to the isotope effect, the thermal transport of both ions and electrons is suppressed in deuterium plasma compared to light hydrogen plasma, and that a high central temperature can be achieved efficiently. Furthermore, the combination of neutral beam injection (NBI) and electron cyclotron heating (ECH) has extended the operating conditions that simultaneously maintain high T i and T e , and comprehensive research on plasma confinement characteristics with an eye to future fusion reactor conditions has progressed.

Large Helical Device↗