Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Gap Assessment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Systems and methods for assessing cable insulation

Methods for assessing cable insulation are provided that can include engaging a first tine gap interdigital capacitor assembly with the exterior of the cable jacket to determine a first capacitance and dissipation factor value of the insulation using the first tine gap interdigital capacitor assembly; engaging a second tine gap interdigital capacitor assembly with the exterior of the cable jacket to determine a second capacitance and dissipation factor value of the insulation using the second tine gap interdigital capacitor assembly.Systems for assessing cable insulation are also provided. The systems can include a cable jacket encompassing cable insulation and conductive material; at least two tine gap interdigital capacitor assemblies engaged with the cable jacket; and processing circuitry operatively engaged with the capacitor assemblies.

Glass, III, Samuel W.↗
DOE OSTI2020

Cybersecurity Vulnerability Mitigation Framework through Empirical Paradigm: Enhanced Prioritized Gap Analysis

Existing cybersecurity vulnerability assessment tools were designed based on the policies and standards defined by organizations such as the U.S. Department of Energy and the National Institute of Standards and Technology (NIST). Frameworks such as the cybersecurity capability maturity model (C2M2) and the NIST Cybersecurity Framework (CSF) are often used by the critical infrastructure owners and operators to determine the cybersecurity maturity of their facility. Although these frameworks are exceptional at performing qualitative cybersecurity analysis and identifying vulnerabilities, they do not provide a means to perform prioritized mitigation of those vulnerabilities in order to achieve a desired cybersecurity maturity. To address that challenge, we developed a framework and software application called the cybersecurity vulnerability mitigation framework through empirical paradigm (CyFEr). This paper presents the detailed architecture of CyFEr’s enhanced prioritized gap analysis (EPGA) methodology and its application to CSF. The efficacy of the presented framework is demonstrated by comparing against existing similar models and testing against the cyber injects from a real-world cyber-attack that targeted industrial control systems (ICS) in critical infrastructures.

Gourisetti, Sri Nikhil G.↗
NASA NTRS1977

A methodology for experimentally based determination of gap shrinkage and effective lifetimes in the emitter and base of p-n junction solar cells and other p-n junction devices

An experimentally based methodology that determines the effective gap shrinkage and lifetime in the emitter of a p-n junction solar cell is described which provides an experimental means for assessing the importance of gap shrinkage relative to that of large recombination rates in the highly doped emitter. The base lifetime is also determined. The methodology pertains to a solar cell after the junction is formed, so that each material parameter determined includes the effects of the processing used in junction fabrication. The methodology consists of strategy and procedures for designing experiments and interpreting data consistently with the physical mechanisms governing device behavior. This careful linking to the device physics uncover the material parameters concealed in the data. To illustrate the procedures, they are applied to an n(+)-p solar cell having substrate resistivity of about 0.1 ohm-cm.

Lindholm, F. A.↗
NASA NTRS1975

Technology and public policy: The process of technology assessment in the Federal Government

Conclusions drawn from research and a series of recommendations for the improvement of the technology assessment process in Federal agencies are presented. The following topics are discussed: (1) who is doing technology assessment; (2) the organization of technology assessments; (3) disciplines and techniques used in technology; (4) analysis of a sample of technology assessment studies: initiation, disciplines, techniques, costs, scope, purpose, and utilization; (5) gaps and overlaps in governmental assessment of nine major technologies; (6) prerequisites for further improvement of technology assessment; and (7) recommendations.

Coates, V. T.↗
NASA NTRS1996

Calculation of tip clearance effects in a transonic compressor rotor

The flow through the tip clearance region of a transonic compressor rotor (NASA rotor 37) was computed and compared to aerodynamic probe and laser anemometer data. Tip clearance effects were modeled both by gridding the clearance gap and by using a simple periodicity model across the ungridded gap. The simple model was run with both the full gap height, and with half the gap height to simulate a vena-contracta effect. Comparisons between computed and measured performance maps and downstream profiles were used to validate the models and to assess the effects of gap height on the simple clearance model. Recommendations were made concerning the use of the simple clearance model. Detailed comparisons were made between the gridded clearance gap solution and the laser anemometer data near the tip at two operating points. The computer results agreed fairly well with the data but overpredicted the extent of the casing separation and underpredicted the wake decay rate. The computations were then used to describe the interaction of the tip vortex, the passage shock, and the casing boundary layer.

Chima, R. V.↗
NASA NTRS1998

Calculation of Tip Clearance Effects in a Transonic Compressor Rotor

The flow through the tip clearance region of a transonic compressor rotor (NASA rotor 37) was computed and compared to aerodynamic probe and laser anemometer data. Tip clearance effects were modeled both by gridding the clearance gap and by using a simple periodicity model across the ungridded gap. The simple model was run with both the full gap height, and with half the gap height to simulate a vena-contracta effect. Comparisons between computed and measured performance maps and downstream profiles were used to validate the models and to assess the effects of gap height on the simple clearance model. Recommendations were made concern- ing the use of the simple clearance model Detailed comparisons were made between the gridded clearance gap solution and the laser anemometer data near the tip at two operating points. The computed results agreed fairly well with the data but overpredicted the extent of the casing separation and underpredicted the wake decay rate. The computations were then used to describe the interaction of the tip vortex, the passage shock, and the casing boundary layer.

Chima, R. V.↗
NASA NTRSDate not supplied

Can Resilience Assessments Inform Early Design Human Factors Decision-making?

There is a growing call among researchers for tighter coupling between human factors and human reliability assessments. In this research, we explore if early design stage resilience assessments can help bridge some of the gaps between human factors and human reliability assessments. Resilience in systems is their ability to recover reasonably and operate within acceptable bounds during failures and unexpected events. The fmdtools toolkit allows designers to assess the resilience of a system by modeling the human error and machine-related failure propagation in both nominal and faulty scenarios during the early design stages. As a result, the fmdtools toolkit has a low-fidelity dynamic human reliability assessment component built into it. In this paper, we study if the results from the fmdtools simulations can help inform and prioritize human factors design decision-making, resulting in tighter coupling between human factors and human reliability assessments during the design process. Specifically, we explore the results from a rover design example to understand the types of information that can help guide human factor-related decision-making.

Resilience-based Design↗
NASA NTRS2007

Spatial Aspects of Multi-Sensor Data Fusion: Aerosol Optical Thickness

The Goddard Earth Sciences Data and Information Services Center (GES DISC) investigated the applicability and limitations of combining multi-sensor data through data fusion, to increase the usefulness of the multitude of NASA remote sensing data sets, and as part of a larger effort to integrate this capability in the GES-DISC Interactive Online Visualization and Analysis Infrastructure (Giovanni). This initial study focused on merging daily mean Aerosol Optical Thickness (AOT), as measured by the Moderate Resolution Imaging Spectroradiometer (MODIS) onboard the Terra and Aqua satellites, to increase spatial coverage and produce complete fields to facilitate comparison with models and station data. The fusion algorithm used the maximum likelihood technique to merge the pixel values where available. The algorithm was applied to two regional AOT subsets (with mostly regular and irregular gaps, respectively) and a set of AOT fields that differed only in the size and location of artificially created gaps. The Cumulative Semivariogram (CSV) was found to be sensitive to the spatial distribution of gap areas and, thus, useful for assessing the sensitivity of the fused data to spatial gaps.

Leptoukh, Gregory↗
NASA NTRSDate not supplied

Validation of a Probabilistic Continuity Assessment Method for Earth Observation Portfolios

With the increased reliance on spaceborne Earth observation data among the Earth science community and other end users, it is important that efforts are made to promote data continuity for a range of parameters of interest. Continuity gaps may occur between missions measuring like parameters due to mission development delays or early termination and introduce the potential of increased uncertainty for retrieved parameters. To inform portfolio-level decisions for Earth observing missions, Ivanco et al. developed a method that enables the assessment of the probability of continuity gaps for multi-mission architectures and provides a framework to assess this probability in the context of multiple scenarios that represent possible future states of the architecture [Ivanco et al., “A Scenario-Based Approach to Assess Continuity Gaps in Earth Observations,” IEEE Aerospace Conf., 2024]. While this method was previously applied to assess continuity gaps for a specific multi-mission architecture, it had not yet been validated with historical data. This paper outlines the process of validating the probabilistic gap assessment method by utilizing data obtained from past NASA Earth Science mission formulation documents and provides a discussion of the results and takeaways from the validation. Future areas of improvement pertaining to both the modeling and simulation methodologies and underlying assumptions are identified and discussed.

Katharine Burn↗
NASA NTRS2008

Effect of Protuberance Shape and Orientation on Space Shuttle Orbiter Boundary-Layer Transition

This document describes an experimental study conducted to examine the effects of protuberances on hypersonic boundary-layer transition. The experiment was conducted in the Langley 20-Inch Mach 6 Tunnel on a series of 0.9%-scale Shuttle Orbiter models. The data were acquired to complement the existing ground-based boundary-layer transition database that was used to develop Version 1.0 of the boundary-layer transition RTF (return-to-flight) tool. The existing ground-based data were all acquired on 0.75%-scale Orbiter models using diamond-shaped ( pizza-box ) trips. The larger model scale facilitated in manufacturing higher fidelity protuberances. The end use of this experimental database will be to develop a technical basis (in the form of a boundary-layer transition correlation) to assess representative protrusion shapes, e.g., gap fillers and protrusions resulting from possible tile repair concepts. The primary objective of this study is to investigate the effects of protuberance-trip location and geometry on Shuttle Orbiter boundary-layer transition. Secondary goals are to assess the effects of gap-filler orientation and other protrusion shapes on boundary-layer transition. Global heat-transfer images using phosphor thermography of the Orbiter windward surface and the corresponding streamwise and spanwise heating distributions were used to infer the state of the boundary layer, i.e., laminar, transitional, or turbulent.

King, RUdolph A.↗
DOE OSTI2022

Compounding Risks from Natural Phenomena Hazards at U.S. Department of Energy Facilities

U.S. Department of Energy (DOE) facilities are exposed to adverse effects of natural phenomena hazards (NPHs). While the DOE Standard (STD) 1020-2016 provides criteria and guidance for assessing these effects, certain gaps exist, particularly related to combinations of NPHs that can compound the risk to DOE facility assets. This report describes a methodology to systematically consider compounding NPHs, identified gaps in DOE-STD-1020-2016, and recommends ways to update the standard. At any given DOE facility, NPH effects depend on the site-specific hydrometeorologic and geoseismic conditions. Therefore, compounding NPHs should be determined using site-specific assessments. DOE facility assets generally are assessed using site-specific NPHs with the assessment usually limited to the DOE site extents. However, an inventory analysis of a selected DOE facility also revealed that some assets may have off-site dependencies. These dependencies may be part of threat pathways that can lead to on-site asset failures because of off-site effects of the same NPHs that also affect the DOE site. These threat pathways usually are not accounted for in traditional NPH analyses. The report also describes the effects of duration of NPH effects. Duration of disruption, particularly for off-site dependencies can lead to on-site asset failures, disruption of evacuation roadways, and consequent human health and safety effects. Finally, the report recommends some considerations for updating DOE-STD-1020-2016 to include explicit consideration of compounding NPHs.

42 ENGINEERING↗
NASA NTRSDate not supplied

Development of Slat-gap and Slat-cove Filler Treatments for Noise Reduction Assessment on the High Lift Common Research Model in the NASA LaRC 14x22

Airframe noise is an important issue during the approach and landing phases of flight because engines are throttled back, and airframe sources become an equal or greater contributor to environmental noise. The leading-edge slat component of the high-lift system for transport aircraft has been identified as a prominent source of airframe noise. Noise production mechanisms and potential treatments to mitigate airframe noise have been areas of active research for nearly three decades. Two promising technologies for slat noise reduction are the slat-gap filler (SGF) and slat-cove filler (SCF). Previous work was done using a 2D section of a transport class aircraft wing to demonstrate their feasibility via benchtop and computational models. A wind tunnel test campaign was recently undertaken to test the SGF and SCF technologies in a flight-like environment by installing dynamically scaled treatments on the 10%-scale High-Lift Common Research Model (CRM-HL), which is representative of a commercial twin-aisle transport aircraft. Advancement of the SGF and SCF technologies to overcome challenges of integration with 3D airframe structures, computational simulations of the CRM-HL predicting the aerodynamic and aeroacoustic performance and structural loads, and design of wind tunnel model hardware with features accommodating noise treatments were conducted in parallel. Details of innovations in the SGF and SCF technologies for 3D airframe feasibility will be described. The loads the treatments must sustain in flight and the influence of those loads on the design is also discussed. Finally, the design of wing leading-edge assemblies to treat the 10% CRM-HL with dynamically scaled SGF and SCF components is presented. The treatments were successfully tested in 2020/2021 providing a demonstration of leading-edge noise reduction using components that would allow slat articulation.

airframe noise reduction↗
DOE OSTI2026

Data for Filling the Cellulosic Bio-economy Gap by Utilizing a Wedge Approach Combined with Stakeholder Collaboration

The price gap between the market and breakeven prices of cellulosic biomass for farmers represents a significant barrier to the development of a low-carbon cellulosic bioeconomy. Using a bottom-up, agent-based modeling tool that replicates the behaviors and interactions of key stakeholders, this study analyzes the emergence of a cellulosic bioeconomy at the local scale through a wedge approach that examines an integrated portfolio of multiple policy options, including subsidies for small-scale bioproducts and environmental credits. The role of collaboration among multiple stakeholders, such as biomass producers (farmers), bio-refinery industry, government, and society, is assessed for filling the price gap. Using the Sangamon River Basin as a case study site, we evaluate the effectiveness of the wedge approach by comparing simulation results from multiple scenarios, each incorporating different combinations of bioeconomy wedges, with and without stakeholder collaboration. Results underscore that active collaboration among stakeholders acts as a catalyst enlarging the effectiveness of bioeconomy wedges. Including the carbon credits and environmental value in the policy portfolio is found to bridge the price gap through collective contributions from diverse stakeholders, where the cellulosic biofuel and bioproduct industry plays a pivotal role. Although this study is conducted at the local watershed scale, the methodology and findings offer valuable insights for market development in other watersheds and the potential scaling of local markets to regional and national levels.

Economics↗
DOE OSTI2021

Health Analysis and Research for Public Events (HARPE) Tool (Final CRADA Report)

Based on its experience in building assessment tools, Argonne National Laboratory (Argonne) has demonstrated expertise in developing comparative methodologies and question sets that provide both a physical and cyber-based risk assessment for the commercial facilities sector. A high-level risk assessment tool can be beneficial for venues and organizations that fall under a wide array of facility characterizations, ultimately accommodating the evolving landscape of threats specific to these facilities. The Health Analysis and Research for Public Events (HARPE) Tool is an assessment that seeks to help facility managers assess and mitigate aspects of safety, security, and emergency management within their venues. With the pandemic featuring prominently in today’s landscape, we have adapted and extended the scope of the HARPE tool so that it offers users the ability to integrate assessments of their preparation for, response to, and recovery from threats faced at the venue arising from the COVID-19 pandemic. Traditional threats and hazards remain prevalent in today’s landscape, and the best defense is a proactive approach to preventing and mitigating these threats. At the very core of prevention and mitigation is the first step of conducting a risk assessment—this is the gap that HARPE fills. While it is obvious that the response to COVID-19 is health and sanitation driven, leaders within the commercial facilities sector must also know where to best extend their efforts in mitigating future threats arising from the pandemic. Public events and mass gatherings are directly impacted by COVID-19; however, with the help of HARPE, leaders can focus their attention on core impact areas related to the safety and security of returning to a new normal, as they assess their risks using the Argonne-developed tool. HARPE provides an important solution to the COVID-19 situation by assisting venue managers and health officials in identifying their risks.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Security Self-Assessment Toolkit for Nuclear Materials Facilities: Focus on Insider Threat Mitigation

Theft or sabotage of weapons-usable nuclear materials is a global concern. To minimize this threat, establishing and maintaining an effective nuclear security regime is required to protect against criminal or other negligent acts. Use of a formalized insider threat mitigation program is one such security measure. Individuals who have or held authorized access to an organization's critical assets, such as nuclear materials, are considered "insiders." Insider threats, or insider adversaries, are motivated individuals who possess access, authority, and knowledge to conduct a malicious act or facilitate that of an external party. To thwart insider threats (both intentional and unintentional), organizations can formalize an enterprise-wide approach to identify and mitigate the unique risks presented by insiders. This report provides an approach to evaluate an insider threat mitigation program at facilities with nuclear materials. Formal program evaluations serve many purposes and can be designed using several different methods and techniques. This report presents a self-assessment approach to program evaluation whereby an organization can assess its strengths, identify key gaps, and set priorities for ongoing improvement efforts to mitigate insider threats. Results of the self-assessment can provide critical information to contribute to the continuous improvement of an organization’s insider threat mitigation program within eight specific domain areas.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2025

STARFIRE – Science and Technology Accelerated Research for Fusion Innovation and Reactor Engineering progress report

The STARFIRE hub leverages foundational science and technology (S&T) research and integrated plant modeling tools to advance Inertial Fusion Energy (IFE). S&T breakthroughs achieved in each thrust are incorporated into an integrated modeling tool to assess and prioritize remaining gaps to bridge for IFE to become viable. Scientific highlights span high-gain target design, diode-pumped solid-state lasers, and innovative target manufacturing. Key highlights include the investigation of shock propagation through various foam structures among other limiting factors of compression of IFE target, exploration of novel 3D printing techniques such as light-sheet additive manufacturing for 2-photon polymerization foams, and diode-pumped solid-state laser architectures required for several IFE approaches. In addition, the STARFIRE team has established two public-private working groups to address laser diode supply chain issues and test advanced laser diode configurations. Finally, a lite version of the integrated modeling tool has been developed to facilitate outreach and engage with private companies. STARFIRE’s management structure has been designed to ensure agile resource allocation, robust performance assessment, and alignment with the broader fusion energy mission. STARFIRE’s breakthroughs are disseminated to the community via reports, presentations, and publications, while agreements with private companies are set in place to protect proprietary information.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Antimicrobial resistance of enteric pathogens in the Military Health System, 2009 – 2019

Abstract Background Acute diarrhea (AD) can have significant impacts on military troop readiness. Medical providers must understand current trends of enteropathogen antimicrobial resistance (AMR) in service members (SMs) to inform proper, timely treatment options. However, little is known of enteric pathogen profiles across the Military Health System (MHS). The primary objectives of this study were to identify gaps in enteric pathogen surveillance within the MHS, describe the epidemiology of AMR in enteric pathogens, and identify trends across the MHS both within the Continental United States (CONUS) and outside of the Continental United States (OCONUS). Methods Health Level 7 (HL7)-formatted laboratory data were queried for all specimens where Salmonella , Shigella , and Campylobacter species, as well as Shiga toxin-producing Escherichia coli ( E. coli ) (STEC) were isolated and certified between 1 January 2009 - 31 December 2019. Antibiotic susceptibility testing (AST) results were queried and summarized where available. Descriptive statistics were calculated for each organism by specimen source, year, and susceptibility testing availability. Results Among a total of 13,852 enteric bacterial isolates, 11,877 (86%) were submitted from CONUS locations. Out of 1479 Shigella spp. and 6755 Salmonella spp. isolates, 1221 (83%) and 5019 (74%), respectively, reported any susceptibility results through the MHS. Overall, only 15% of STEC and 4% of Campylobacter spp. specimens had AST results available. Comparing AST reporting at CONUS versus OCONUS locations, AST was reported for 1175 (83%) and 46 (78%) of Shigella isolates at CONUS and OCONUS locations, respectively, and for 4591 (76%) and 428 (63%) of Salmonella isolates at CONUS and OCONUS locations, respectively. Conclusions This study revealed inconsistent enteropathogen AST conducted across the MHS, with differing trends between CONUS and OCONUS locations. Additional work is needed to assess pathogen-specific gaps in testing and reporting to develop optimal surveillance that supports the health of the force.

Ashbaugh, Hayley↗
DOE OSTI2025

Geologic hydrogen: From natural occurrences to anthropogenic generation – A review of fundamentals, potential, challenges and prospects

Growing demand for hydrogen is exposing the environmental and economic limits of reforming-based and carbon-managed supply chains, while the scale-up of electrolytic capacity remains capital-constrained. Geologic hydrogen, defined as molecular H₂ generated and stored within the Earth's crust offers a complementary, potentially lower-cost resource, yet exploration is still ad hoc. This review (1) revisits a global inventory of confirmed hydrogen seeps and subsurface occurrences; (2) analyzes the controlling reactions, migration pathways, and trapping conditions governing these occurrences; (3) proposes a process-based geologic hydrogen system concept analogous to, yet distinct from, the petroleum system; and (4) evaluates potential geologic hydrogen systems within the United States as a representative case study. Here, we contrast natural systems powered by serpentinization, mantle degassing or radiolysis with anthropogenic systems that stimulate the same reactions or convert in-situ hydrocarbons. Stable hydrogen accumulations require generation rates that outpace combined physical, chemical and microbial losses; the Bourakébougou field (Mali) exemplifies a self-recharging, free-gas reservoir sustained by meteoric-water serpentinization beneath an efficient caprock. Prospective geologic hydrogen resources are likely to occur in regions where iron-rich lithologies, deep-seated faults, and low-permeability sealing formations coexist. Applying this principle, we highlight three promising hydrogen play types in U.S. geological terrains: ophiolite belts (Appalachian and Californian regions), the Midcontinent Rift and the Lake Superior banded‑iron formations. Multiphysics numerical models and positive-unlabeled machine-learning workflows help to accelerate play screening and de-risk future production; yet, reaction kinetics, stimulation strategies, and full techno-economic and life-cycle assessments remain pivotal knowledge gaps.

Anthropogenic hydrogen generation↗