Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fe doping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Acceptor dopant mediated electrical property modification in Bi0.5Na0.5TiO3-based piezoceramic

The effect of Mn and Fe dopants on the electromechanical and electrochemical properties of 0.88[Bi 0.5 Na 0.5 ]TiO 3 –0.08[Bi 0.5 K 0.5 ]TiO 3 –0.04[Bi 0.5 Li 0.5 ]TiO 3 piezoceramic is investigated with particular emphasis on complex impedance in the temperature range from 450 to 600 °C. The impedance spectra have been simulated with equivalent circuits in order to extract bulk and grain boundary characteristics and to determine activation energies of conduction. Mn and Fe dopants considerably enhance the mechanical quality factor and decrease the dielectric loss compared to the undoped composition. Mn doping leads to dramatically higher resistivity in the bulk and a modest increase in the bulk activation energy. On the other hand, conductivity increases dramatically via Fe doping with a significant lowering of activation energy in the bulk and corresponding raising of the activation energy at grain boundaries in comparison to Mn-doped and undoped ceramic. The bulk conductivity of Fe-doped piezoceramic reaches as high as 0.01 S cm -1 at 600 °C.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Tuning 2D magnetism in Fe 3+X GeTe 2 films by element doping

Two-dimensional (2D) ferromagnetic materials have been discovered with tunable magnetism and orbital-driven nodal-line features. Controlling the 2D magnetism in exfoliated nanoflakes via electric/magnetic fields enables a boosted Curie temperature (T C ) or phase transitions. One of the challenges, however, is the realization of high T C 2D magnets that are tunable, robust and suitable for large scale fabrication. Here, we report molecular-beam epitaxy growth of wafer-scale Fe 3+X GeTe 2 films with T C above room temperature. By controlling the Fe composition in Fe 3+X GeTe 2 , a continuously modulated T C in a broad range of 185–320 K has been achieved. This widely tunable T C is attributed to the doped interlayer Fe that provides a 40% enhancement around the optimal composition X = 2. We further fabricated magnetic tunneling junction device arrays that exhibit clear tunneling signals. Our results show an effective and reliable approach, i.e. element doping, to producing robust and tunable ferromagnetism beyond room temperature in a large-scale 2D Fe 3+X GeTe 2 fashion.

2D ferromagnetic material↗
DOE OSTI2026

The Effects of Iron and Manganese Doping on the Carbonation of Brucite [Mg(OH) 2 ]

Brucite [Mg(OH) 2 ] is a promising sorbent for carbon dioxide removal (CDR) due to its availability and low calcination temperatures. However, natural and synthetic brucites tend to contain metal impurities, such as iron or manganese, and how these impurities affect the interfacial chemical reactivity is uncertain. Here, in this study, the impact of low concentrations of iron and manganese impurities on the carbonation efficiency of Mg(OH) 2 was examined. Mg(OH) 2 with small amounts (1–5 mol %) of Fe and Mn was synthesized. The increasing substitution of Fe into Mg(OH) 2 was accompanied by the oxidation of Fe. The phase transformation sequence during the carbonation was found to be brucite [Mg(OH) 2 ] → amorphous magnesium carbonate (MgCO 3 ·nH 2 O) → nesquehonite (MgCO 3 ·3H 2 O), regardless of impurity concentration. Both the Fe- and Mn-doped Mg(OH) 2 samples were more reactive than endmember Mg(OH) 2 , possibly due to their higher surface areas and lower stabilities. During carbonation, 3 mol % Fe- and Mn-doped Mg(OH) 2 showed the highest reactivity. The variance in reactivity for Mn-doped Mg(OH) 2 was less than that of Fe-doped Mg(OH) 2 . These results suggest that natural or industrial waste Mg(OH) 2 with less than 5 mol % Fe and Mn impurities may be targeted as more effective CDR sorbents than endmember Mg(OH) 2 .

Carbon dioxide removal↗
DOE OSTI2020

Soft elastic constants from phonon spectroscopy in hole-doped Ba 1-x (K,Na) x Fe 2 As 2 and Sr 1-x Na x Fe 2 As 2

We report inelastic x-ray scattering measurements of the in-plane polarized transverse acoustic phonon mode propagating along q ∥ [ 100 ] in various hole-doped compounds belonging to the 122 family of iron-based superconductors. Additionally, the slope of the dispersion of this phonon mode is proportional to the square root of the shear modulus C 66 in the q → 0 limit and, hence, sensitive to the tetragonal to orthorhombic structural phase transition occurring in these compounds. In contrast to a recent report for Ba ( Fe 0.94 Co 0.06 ) 2 As 2 [Weber et al. , Phys. Rev. B 98 , 014516 (2018) ], we find qualitative agreement between values of C 66 deduced from our experiments and those derived from measurements of the Young modulus in Ba 1 - x ( K , Na ) x Fe 2 As 2 at optimal doping. These results provide an upper limit of about 50 Å for the nematic correlation length for the investigated optimally hole-doped compounds. Furthermore, we also studied compounds at lower doping levels exhibiting the orthorhombic magnetic phase, where C 66 is not accessible by volume probes, as well as the C 4 tetragonal magnetic phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Enhanced Phase Stability of Sm 2 (Fe, Al) 17 C x

Aluminum doping can improve the phase stability of metastable compound Sm 2 Fe 17 C x with a high carbon content (x > 1.5). We investigated the preferential site substitution of Al, chemical bonding, and structural stability in Sm 2 (Fe,Al) 17 C 3 using first-principle calculations. Our results reveal a strong correlation between the preferential substitution of Fe by Al and the atomic site chemical environment, which affects the overall phase stability. Specifically, Al preferentially occupies the 9d site in Sm 2 (Fe,Al) 17 C 3 . At the same time, Al prefers the site 6c in its parent phase Sm 2 (Fe,Al) 17 . Partial replacement of Fe with Al leads to a more negative formation energy, indicating enhanced thermodynamic stability. Crystal Orbital Hamilton Population (COHP) and Crystal Orbital Bond Index (COBI) analysis suggest that insertion of carbon weakens the bonding strength of Sm-Fe (18f) and Sm-Fe (18h), resulting in metastability of Sm 2 Fe 17 C x . Doping Al strengthens Al-Fe, Al-Sm, Sm-Fe (18f, 18h) and Fe–C bonding in Sm 2 (Fe,Al) 17 C 3 , as revealed by calculated COHP and COBI. These effects contribute to improved phase stability in the Al-doped 2:17 interstitial compound.

chemical bonding↗
DOE OSTI2025

Manipulating the Second Coordination Shell of Single-Atom Fe for Enhanced Fenton Reaction

While current methods use oxidizable metals as electron donors to effectively reduce Fe 3+ , they suffer from the irreversible oxidation of these metals, ultimately compromising the catalyst’s longevity. To address this challenge, we engineered the second coordination shell of a single-atom Fe center by doping boron (B) onto a graphene-based support (Fe 1 /B-graphene) and utilized H 2 O 2 as the electron source for efficient Fe 2+ regeneration. Experimental results, supported by theoretical calculations, revealed that the Fe–O–B motif functions like a micro galvanic cell, with intermediary O atoms facilitating electron transfer between electrodes. Specifically, electrons consumed during H 2 O 2 activation at Fe 1 sites (positive electrode) are replenished by electrons extracted from H 2 O 2 at B atoms (negative electrode), where the activation energy for H 2 O 2 oxidation is significantly lower than that at Fe 1 sites. This study offers inspirational insights into the design of Fenton catalysts through precise regulation of the second coordination shell, demonstrating the potential of tailoring the outer coordination environment of single-atom catalysts to enhance catalytic performance across various reactions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Insights into ε - Fe 2 O 3 interactions via Cr doping

We report innovative materials, particularly multiferroics, have the potential to transform technology. Full optimization of their usage will require an in-depth understanding of the underlying electronic and magnetic interactions. One such material is ε-Fe 2 O 3 . However, because this hard ferrimagnet with strong magnetoelectric coupling is composed of only Fe 3+ , distinguishing the role of the various sites is incredibly challenging. To overcome this challenge, Cr 3+ ions were doped into the DOh1 sites of ε-Fe 2 O 3 nanoparticles, effectively creating electron deficient defects. The ε-(Fe 1-x Cr x ) 2 O 3 (x = 0.01 to 0.12) nanoparticles have reduced μ 0 H C (T) and M S (T) as the Cr concentration increases. The impact of Cr doping on the local electronic and magnetic structure is characterized. At 10 K, subtle changes are measured, with the T d site electrons becoming increasingly localized as the concentration of electron-deficient DOh1 sites increases. Far more dramatic changes occur at 300 K, when the T d site of the ε-(Fe 1-x Cr x ) 2 O 3 splits into two distinct local environments with Fe 2+ and Fe 4+ character. The nature of this splitting suggests that dynamic electron interactions play a significant role in ε-Fe 2 O 3 ’s magnetic anisotropy and magnetoelectric properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Fe 1+ y Te x Se1- x : A Delicate and Tunable Majorana Material

Here, we report the observation for the p z electron band and the band inversion in Fe 1 + y Te x Se 1–x with angle-resolved photoemission spectroscopy. Furthermore, we found that excess Fe (y > 0) inhibits the topological band inversion in Fe 1 + y Te x Se 1 – x , which explains the absence of Majorana zero modes in previous reports for Fe 1+y Te x Se 1 – x with excess Fe. Based on our analysis of different amounts of Te doping and excess Fe, we propose a delicate topological phase in this material. Thanks to this delicate phase, one may be able to tune the topological transition via applying lattice strain or carrier doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Evidence of multiscale supercurrents in K-doped BaFe 2 As 2

K-doped BaAs 2 Fe 2 (K-Ba122) superconductor is a promising material for applications. However, it has been found challenging to achieve high critical current density (J c ) in untextured bulk sample. In this paper we investigated bulk samples prepared by varying the milling energy density, which affects the grain and grain boundary microstructures, and we investigated their magnetic performance to better understand what causes their different J c . We found that in our samples, which all have small grain size, T c does not appear directly correlated to J c . Moreover, AC susceptibility reveals in at least one case obvious signs of multiscale supercurrents, not caused by granularity but that directly influence the overall J c performance. Considering the microstructural features and the magnetization response we ascribed the J c differences to lack of connectivity on a larger scale due to nano-cracks at some grain boundaries, which subdivided the samples into macroscopic regions and inevitably limited the overall performance. We discuss possible routes to overcome those extrinsic current-blocking defects.

AC susceptibility↗
DOE OSTI2020

Iron-Doped Sodium Vanadium Oxyflurophosphate Cathodes for Sodium-Ion Batteries—Electrochemical Characterization and In Situ Measurements of Heat Generation

Sodium-ion batteries (NaIBs) are increasingly being envisioned for grid-scale energy-storage systems because of cost advantages. However, implementation of this vision has been challenged by the low-energy densities delivered by most NaIB cathodes. Toward addressing this challenge, the authors report the synthesis and characterization of a new iron-doped Na 3 Fe 0.3 V 1.7 O(PO 4 ) 2 F 2 cathode using a novel facile hydrothermal route. The synthesized material was characterized using scanning electron microscopy, X-ray diffraction, and Mössbauer spectroscopy techniques. The obtained discharge capacity in the half-cell configuration lies from 119 to 125 to 130 mA h/g at C/10 while tested using three different electrolyte formulations, dimethyl carbonate–ethylene carbonate (EC)–propylene carbonate (PC), diethyl carbonate–EC, and EC–PC, respectively. The synthesized cathodes were also evaluated in full-cell configurations, which delivered an initial discharge capacity of 80 mA h/g with NaTi 2 (PO 4 ) 3 MWCNT as the anode. Ionic diffusivity and interfacial charge transfer kinetics were also evaluated as a function of temperature and sodium concentration, which revealed that electrochemical rate performances in this material were limited by charge-transfer kinetics. To understand the heat generation mechanism of the Na/Na 3 Fe 0.3 V 1.7 O(PO 4 ) 2 F 2 half-cell during charge and discharge processes, an electrochemical isothermal calorimetry measurement was carried out at different current rates for two different temperatures (25 and 45 °C). The results showed that the amount of heat generated was strongly affected by the operating charge/discharge state, C-rate, and temperature. Altogether, this work provides a new synthesis route for the development of iron-doped Na 3 Fe 0.3 V 1.7 O(PO 4 ) 2 F 2 -based high-performance sodium cathode materials aimed at providing a viable pathway for the development and deployment of large-scale energy-storage based on sodium battery systems.

25 ENERGY STORAGE↗
DOE OSTI2020

Engineering efficient bifunctional electrocatalysts for rechargeable zinc–air batteries by confining Fe–Co–Ni nanoalloys in nitrogen-doped carbon nanotube@nanosheet frameworks

Developing precious-metal-free bifunctional oxygen reduction and evolution reaction (ORR/OER) electrocatalysts is of great significance for several key energy conversion and storage systems, yet remains a formidable challenge. In this work, we systematically designed Fe–Co–Ni trimetallic nanoalloys encapsulated in nitrogen-doped carbon nanotube@nanosheet frameworks (FeCoNi-NC) for application as effective bifunctional ORR/OER electrocatalysts. The rational structural design of FeCoNi-NC provides hierarchical porosity coupled with greatly increased effective electrochemical specific area for exposing abundant active sites and enhanced mass-transfer capability toward the ORR/OER. Experimental observations and theoretical calculations confirmed that Fe–Co–Ni nanoalloys interacting with pyridinic nitrogen-rich carbon synergistically optimized the adsorption/desorption free energies of oxygen intermediates, thus significantly enhancing the intrinsic ORR/OER activity. Consequently, FeCoNi-NC exhibits remarkable bifunctionality for the ORR (half-wave potential of 0.89 V) and OER (1.54 V at 10 mA cm –2 ) with ΔE = 0.65 V, and even outperforms Pt/C–RuO 2 benchmarks. Moreover, the corresponding zinc–air battery shows large power density (315.2 mW cm –2 ), high capacity (803.78 mA h g –1 at 100 mA cm –2 ) and excellent cycling durability (over 100 hours at 50 mA cm –2 ), further testifying its practical applications. This work demonstrates an effective pathway to highly active non-precious-metal bifunctional catalysts toward sustainable energy technologies.

25 ENERGY STORAGE↗
DOE OSTI2023

Chemical Kinetic Method for Active-Site Quantification in Fe-N-C Catalysts and Correlation with Molecular Probe and Spectroscopic Site-Counting Methods

Mononuclear Fe ions ligated by nitrogen (FeN x ) dispersed on nitrogen-doped carbon (Fe-N-C) serve as active centers for electrocatalytic O 2 reduction and thermocatalytic aerobic oxidations. Despite their promise as replacements for precious metals in a variety of practical applications, such as fuel cells, the discovery of new Fe-N-C catalysts has relied primarily on empirical approaches. In this context, the development of quantitative structure–reactivity relationships and benchmarking of catalysts prepared by different synthetic routes and by different laboratories would be facilitated by the broader adoption of methods to quantify atomically dispersed FeN x active centers. In the present study, we develop a kinetic probe reaction method that uses the aerobic oxidation of a model hydroquinone substrate to quantify the density of FeN x centers in Fe- N-C catalysts. The kinetic method is compared with low-temperature Mössbauer spectroscopy, CO pulse chemisorption, and electrochemical reductive stripping of NO derived from NO 2 – on a suite of Fe-N-C catalysts prepared by diverse routes and featuring either the exclusive presence of Fe as FeN x sites or the coexistence of aggregated Fe species in addition to FeN x . The FeN x site densities derived from the kinetic method correlate well with those obtained from CO pulse chemisorption and Mössbauer spectroscopy. The broad survey of Fe-N-C materials also reveals the presence of outliers and challenges associated with each site quantification approach. Furthermore, the kinetic method developed here does not require pretreatments that may alter active-site distributions nor specialized equipment beyond reaction vessels and analytical instrumentation (e.g., NMR).

36 MATERIALS SCIENCE↗
DOE OSTI2025

Ab initio prediction of FeCr sigma (001)/FCC Fe(111) interfacial energy: Effect of interfacial doping of C, B, and N

Interfacial energy plays a crucial role for high-temperature material systems in determining their microstructure evolution and mechanical properties. Optimizing the interfacial energy through doping can improve the stability, performance, and overall functionality of these materials. Here, the present study delivers theoretical investigation on the sigma FeCr (001)//FCC Fe (111) interfacial energy using ab initio methods, focusing on the implications of interfacial doping with important interstitial elements carbon (C), boron (B), and nitrogen (N). The calculated interfacial energy without doping is 0.183J/m 2 . Upon doping, notable reductions in interfacial energy were observed. Doping with B decreased the interfacial energy to 0.046J/m 2 , with single C doping to 0.126J/m 2 , with two C doping to 0.098J/m 2 , and with a single N doping to 0.071J/m 2 . These findings not only shed light on the atomistic origin for the effect of stabilizing the microstructure of stainless steel at elevated temperatures by interstitial doping, but also present a systematic, thorough ab initio approach to predict interfacial doping properties and guide alloy design to enhance the performance and stability.

FeCr sigma phase↗
DOE OSTI2022

Tuning the Co/Fe ratio in BaCo x Fe 0.8– x Zr 0.1 Y 0.1 O 3– δ , a promising triple ionic and electronic conducting oxide, to boost electrolysis and fuel cell performance

The triple conducting oxide BaCo 0.4 Fe 0.4 Zr 0.1 Y0.1O 3–δ (BCFZY4411), which accommodates simultaneous transport of protons, oxygen ions, and p-type electronic carriers, has been intensively investigated in recent years as a high-performance positive electrode material for fuel cell and electrolysis applications. The heavy Co and Fe-based transition metal doping in BCFZY4411 ensures adequate electrical conductivity while the multiple oxidation states of Co and Fe assist the electrocatalytic and redox ability. Despite the considerable role of Co and Fe transition metal doping in controlling electrochemical activity, however, the study of alternative BCFZY compositions with varying Co/Fe ratios has not yet been pursued. Here, we evaluate the electrochemical performance of a series of BaCo x Fe 0.8–x Zr 0.1 Y0.1O 3–δ compositions with varying Co/Fe ratio (x = 0.1, 0.2, 0.4, 0.6, 0.7) and use oxygen ion tracer diffusion and in situ high-temperature X-ray diffraction to investigate the effect of Co/Fe ratio on electrocatalytic activity, electronic conductivity, oxygen ion incorporation and transport kinetics, and thermomechanical behavior. We find that Co-rich BCFZY7111 yields the highest performance due to exceptionally high oxygen vacancy diffusion and shows a lower and more linear thermal expansion behavior compared to Fe-rich compositions. A protonic ceramic button cell incorporating a BCFZY7111 positive electrode yields a peak power density of 695 mW cm –2 under fuel cell mode and an electrolysis current density of 1976 mA cm –2 at 1.4 V at 600 °C, underscoring the promise of this new BCFZY electrode composition.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

Magnetic and superconducting anisotropy in Ni-doped RbEuFe 4 As 4 single crystals

We investigate the effect of Ni doping on the Fe site in single crystals of the magnetic superconductor RbEuFe 4 As 4 for doping concentrations of up to 4%. A clear suppression in the superconducting transition temperature is observed in specific-heat, resistivity, and magnetization measurements. Upon Ni doping, the resistivity curves shift up in a parallel fashion, indicating a strong increase of the residual resistivity due to scattering by charged dopant atoms while the shape of the curve and thus the electronic structure appear largely unchanged. The observed step Delta C/T c at the superconducting transition decreases strongly for increasing Ni doping in agreement with expectations based on a model of multiband superconductivity and strong interband pairing. The upper critical field slopes are reduced upon Ni doping for in-plane as well as out-of-plane fields, leading to a small reduction in the superconducting anisotropy. The specific-heat measurements of the magnetic transition reveal the same Berezinskii-Kosterlitz-Thouless behavior close to the transition temperature T m for all doping levels. The transition temperature is essentially unchanged upon doping. The in-plane to out-of-plane anisotropy of Eu magnetism observed at small magnetic fields is unaltered as compared to the undoped compound. In conclusion, all of these observations indicate a decoupling of the Eu magnetism from superconductivity and essentially no influence of Ni doping on the Eu magnetism in this compound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗