Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLOCCULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Soil Organic Matter Stabilization by Polyvalent Cations in a Buried Alkaline Soil

Buried paleosols can store large quantities of organic carbon (C), much of which persists for millennia due to isolation from surface processes that promote decomposition. Subsoil organic matter (SOM) persistence is often enhanced by mineral associations and ionic conditions—particularly high clay content and polyvalent cations—that limit microbial degradation and leaching. However, the vulnerability of these deep C stocks under erosion or environmental change remains poorly understood. This study investigates controls on SOM stabilization in the Brady paleosol and overlying modern soils across contrasting geomorphic settings in the Great Plains of Nebraska where Late Quaternary loess deposition and erosion created a sequence of buried and exposed paleosols. We sampled soils along burial and erosional toposequences and analyzed their physicochemical properties and radiocarbon‐based persistence of occluded particulate organic matter (oPOM) and mineral fractions (MF). Brady paleosol showed greater persistence (lower Fm) of oPOM and MF than modern soils, particularly under burial. This was linked to higher silt and clay content, elevated electrical conductivity, and increased exchangeable calcium and magnesium content, supporting roles for organo‐mineral interactions, flocculation, and carbonate cementation. In modern soils, SOM persistence and C content were more strongly tied to pH and cation exchange capacity. Erosional exposure reduced SOM stability and promoted geochemical convergence toward modern surface soils. These findings show that burial enhances SOM persistence via multiple stabilization mechanisms, while erosion increases subsoil C vulnerability. Our results underscore the importance of geomorphic and geochemical context in predicting soil C stability under environmental change.

Environmental sciences↗

Simulation of shear thickening in attractive colloidal suspensions

The influence of attractive forces between particles under conditions of large particle volume fraction is addressed using numerical simulations which account for hydrodynamic, Brownian, conservative and frictional contact forces. The focus is on conditions for which a significant increase in the apparent viscosity at small shear rates, and possibly the development of a yield stress, is observed. The high shear rate behavior for Brownian suspensions has been shown in recent work [R. Mari, R. Seto, J. F. Morris & M. M. Denn, PNAS, 2015, 112, 15326-15330] to be captured by the inclusion of pairwise forces of two forms, one a contact frictional interaction and the second a repulsive force common in stabilized colloidal dispersions. Under such conditions, shear thickening is observed when shear stress is comparable to the sum of the Brownian stress and a characteristic stress based on the combination of interparticle force with kT the thermal energy. At sufficiently large volume fraction, this shear thickening can be very abrupt. Here it is shown that when attractive interactions are present with the noted forces, the shear thickening is obscured, as the viscosity shear thins with increasing shear rate, eventually descending from an infinite value (yield stress conditions) to a plateau at large stress; this plateau is at the same level as the large-shear rate viscosity found in the shear thickened state without attractive forces. It is shown that this behavior is consistent with prior observations in shear thickening suspensions modified to be attractive through depletion flocculation [V. Gopalakrishnan & C. F. Zukoski J. Rheol., 2004, 48, 1321-1344]. The contributions of the contact, attractive, and hydrodynamics forces to the bulk stress are presented, as are the contact networks found at different attractive strengths.

36 MATERIALS SCIENCE↗

Graphite to ultrafine nanocrystalline diamond phase transition model and growth restriction mechanism induced by nanosecond laser processing

To have a clear insight into nanocrystal growth from graphite to diamond upon high energy pulsed laser irradiation of graphite suspension, synthesis of ultrafine nanocrystalline diamonds with laser energy set up from 0.3 J to 12 J, repetition rate of 10 Hz has been studied. The method allows synthesizing ultrafine nanocrystalline particles continuously at the ambient temperature and normal pressure. The particle size is shown independent of laser energy, which is ultrafine and ranges in 2–6 nm. The theoretical grown size of nano-diamonds is found in well agreement with the experiment results. Four kinds of production were found: nano-diamond, spherical carbon nano-particles, flocculent amorphous carbon, and graphene nano-ribbon rolls. A solid-vapor-plasma-liquid coexistence model describing phase transition from graphite to diamond induced by nanosecond laser processing was proposed. Graphene nano-ribbon rolls might be the intermediate phase in the conversion from graphite to diamond.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

REGULATION OF STAR FORMATION RATES IN MULTIPHASE GALACTIC DISKS: A THERMAL/DYNAMICAL EQUILIBRIUM MODEL

We develop a model for the regulation of galactic star formation rates {Sigma}{sub SFR} in disk galaxies, in which interstellar medium (ISM) heating by stellar UV plays a key role. By requiring that thermal and (vertical) dynamical equilibrium are simultaneously satisfied within the diffuse gas, and that stars form at a rate proportional to the mass of the self-gravitating component, we obtain a prediction for {Sigma}{sub SFR} as a function of the total gaseous surface density {Sigma} and the midplane density of stars+dark matter {rho}{sub sd}. The physical basis of this relationship is that the thermal pressure in the diffuse ISM, which is proportional to the UV heating rate and therefore to {Sigma}{sub SFR}, must adjust until it matches the midplane pressure value set by the vertical gravitational field. Our model applies to regions where {Sigma} {approx}< 100 M{sub sun} pc{sup -2}. In low-{Sigma}{sub SFR} (outer-galaxy) regions where diffuse gas dominates, the theory predicts that {Sigma}{sub SFR{proportional_to}{Sigma}{radical}}({rho}{sub sd}). The decrease of thermal equilibrium pressure when {Sigma}{sub SFR} is low implies, consistent with observations, that star formation can extend (with declining efficiency) to large radii in galaxies, rather than having a sharp cutoff at a fixed value of {Sigma}. The main parameters entering our model are the ratio of thermal pressure to total pressure in the diffuse ISM, the fraction of diffuse gas that is in the warm phase, and the star formation timescale in self-gravitating clouds; all of these are (at least in principle) direct observables. At low surface density, our model depends on the ratio of the mean midplane FUV intensity (or thermal pressure in the diffuse gas) to the star formation rate, which we set based on solar-neighborhood values. We compare our results to recent observations, showing good agreement overall for azimuthally averaged data in a set of spiral galaxies. For the large flocculent spiral galaxies NGC 7331 and NGC 5055, the correspondence between theory and observation is remarkably close.

79 ASTRONOMY AND ASTROPHYSICS↗

GRAVITATIONAL INSTABILITIES IN TWO-COMPONENT GALAXY DISKS WITH GAS DISSIPATION

Growth rates for gravitational instabilities in a thick disk of gas and stars are determined for a turbulent gas that dissipates on the local crossing time. The scale heights are derived from vertical equilibrium. The accuracy of the usual thickness correction, (1 + kH){sup -1}, is better than 6% in the growth rate when compared to exact integrations for the gravitational acceleration in the disk. Gas dissipation extends the instability to small scales, removing the minimum Jeans length. This makes infinitesimally thin disks unstable for all Toomre-Q values and reasonably thick disks stable at high Q primarily because of thickness effects. The conventional gas+star threshold, Q{sub tot}, increases from {approx}1 without dissipation to 2 or 3 when dissipation has a rate equal to the crossing rate over a perturbation scale. Observations of Q{sub tot} {approx} 2-3 and the presence of supersonic turbulence suggest that disks are unstable over a wide range of scales. Such instabilities drive spiral structure if there is shear and clumpy structure if shear is weak; they may dominate the generation of turbulence. Feedback regulation of Q{sub tot} is complex because the stellar component does not cool; the range of spiral strengths from multiple arm to flocculent galaxies suggests that feedback is weak. Gravitational instabilities may have a connection to star formation even when the star formation rate scales directly with the molecular mass because the instabilities return dispersed gas to molecular clouds and complete the cycle of cloud formation and destruction. The mass flow to dense clouds by instabilities can be 10 times larger than the star formation rate.

79 ASTRONOMY AND ASTROPHYSICS↗

GAS SURFACE DENSITY, STAR FORMATION RATE SURFACE DENSITY, AND THE MAXIMUM MASS OF YOUNG STAR CLUSTERS IN A DISK GALAXY. II. THE GRAND-DESIGN GALAXY M51

We analyze the relationship between maximum cluster mass and surface densities of total gas ({Sigma}{sub gas}), molecular gas ({Sigma}{sub H{sub 2}}), neutral gas ({Sigma}{sub H{sub I}}), and star formation rate ({Sigma}{sub SFR}) in the grand-design galaxy M51, using published gas data and a catalog of masses, ages, and reddenings of more than 1800 star clusters in its disk, of which 223 are above the cluster mass distribution function completeness limit. By comparing the two-dimensional distribution of cluster masses and gas surface densities, we find for clusters older than 25 Myr that M{sub 3rd}{proportional_to}{Sigma}{sub H{sub I}{sup 0.4{+-}0.2}}, whereM{sub 3rd} is the median of the five most massive clusters. There is no correlation with{Sigma}{sub gas},{Sigma}{sub H2}, or{Sigma}{sub SFR}. For clusters younger than 10 Myr, M{sub 3rd}{proportional_to}{Sigma}{sub H{sub I}{sup 0.6{+-}0.1}} and M{sub 3rd}{proportional_to}{Sigma}{sub gas}{sup 0.5{+-}0.2}; there is no correlation with either {Sigma}{sub H{sub 2}} or{Sigma}{sub SFR}. The results could hardly be more different from those found for clusters younger than 25 Myr in M33. For the flocculent galaxy M33, there is no correlation between maximum cluster mass and neutral gas, but we have determined M{sub 3rd}{proportional_to}{Sigma}{sub gas}{sup 3.8{+-}0.3}, M{sub 3rd}{proportional_to}{Sigma}{sub H{sub 2}{sup 1.2{+-}0.1}}, and M{sub 3rd}{proportional_to}{Sigma}{sub SFR}{sup 0.9{+-}0.1}. For the older sample in M51, the lack of tight correlations is probably due to the combination of strong azimuthal variations in the surface densities of gas and star formation rate, and the cluster ages. These two facts mean that neither the azimuthal average of the surface densities at a given radius nor the surface densities at the present-day location of a stellar cluster represent the true surface densities at the place and time of cluster formation. In the case of the younger sample, even if the clusters have not yet traveled too far from their birth sites, the poor resolution of the radio data compared to the physical sizes of the clusters results in measured{Sigma} that are likely quite diluted compared to the actual densities relevant for the formation of the clusters.

79 ASTRONOMY AND ASTROPHYSICS↗

The onset of spiral structure in the universe

The onset of spiral structure in galaxies appears to occur between redshifts 1.4 and 1.8 when disks have developed a cool stellar component, rotation dominates over turbulent motions in the gas, and massive clumps become less frequent. During the transition from clumpy to spiral disks, two unusual types of spirals are found in the Hubble Ultra Deep Field that are massive, clumpy, and irregular like their predecessor clumpy disks, yet spiral-like or sheared like their descendants. One type is 'woolly' with massive clumpy arms all over the disk and is brighter than other disk galaxies at the same redshift, while another type has irregular multiple arms with high pitch angles, star formation knots, and no inner symmetry like today's multiple-arm galaxies. The common types of spirals seen locally are also present in a redshift range around z ∼ 1, namely grand design with two symmetric arms, multiple arm with symmetry in the inner parts and several long, thin arms in the outer parts, and flocculent, with short, irregular, and patchy arms that are mostly from star formation. Normal multiple-arm galaxies are found only closer than z ∼ 0.6 in the Ultra Deep Field. Grand design galaxies extend furthest to z ∼ 1.8, presumably because interactions can drive a two-arm spiral in a disk that would otherwise have a more irregular structure. The difference between these types is understandable in terms of the usual stability parameters for gas and stars, and the ratio of the velocity dispersion to rotation speed.

79 ASTRONOMY AND ASTROPHYSICS↗

A CATALOG OF DETAILED VISUAL MORPHOLOGICAL CLASSIFICATIONS FOR 14,034 GALAXIES IN THE SLOAN DIGITAL SKY SURVEY

We present a catalog of detailed visual classifications for 14,034 galaxies in the Sloan Digital Sky Survey (SDSS) Data Release 4 (DR4). Our sample includes nearly all spectroscopically targeted galaxies in the redshift range 0.01 < z < 0.1 down to an apparent extinction-corrected limit of g < 16 mag. In addition to T-Types, we record the existence of bars, rings, lenses, tails, warps, dust lanes, arm flocculence, and multiplicity. This sample defines a comprehensive local galaxy sample which we will use in future papers to study low-redshift morphology. It will also prove useful for calibrating automated galaxy classification algorithms. In this paper, we describe the classification methodology used, detail the systematics and biases of our sample, and summarize the overall statistical properties of the sample, noting the most obvious trends that are relevant for general comparisons of our catalog with previously published work.

79 ASTRONOMY AND ASTROPHYSICS↗

MID-INFRARED GALAXY MORPHOLOGY FROM THE SPITZER SURVEY OF STELLAR STRUCTURE IN GALAXIES (S{sup 4}G): THE IMPRINT OF THE DE VAUCOULEURS REVISED HUBBLE-SANDAGE CLASSIFICATION SYSTEM AT 3.6 {mu}m

Spitzer Space Telescope Infrared Array Camera imaging provides an opportunity to study all known morphological types of galaxies in the mid-IR at a depth significantly better than ground-based near-infrared and optical images. The goal of this study is to examine the imprint of the de Vaucouleurs classification volume in the 3.6 {mu}m band, which is the best Spitzer waveband for galactic stellar mass morphology owing to its depth and its reddening-free sensitivity mainly to older stars. For this purpose, we have prepared classification images for 207 galaxies from the Spitzer archive, most of which are formally part of the Spitzer Survey of Stellar Structure in Galaxies (S{sup 4}G), a Spitzer post-cryogenic ('warm') mission Exploration Science Legacy Program survey of 2331 galaxies closer than 40 Mpc. For the purposes of morphology, the galaxies are interpreted as if the images are blue light, the historical waveband for classical galaxy classification studies. We find that 3.6 {mu}m classifications are well correlated with blue-light classifications, to the point where the essential features of many galaxies look very similar in the two very different wavelength regimes. Drastic differences are found only for the most dusty galaxies. Consistent with a previous study by Eskridge et al., the main difference between blue-light and mid-IR types is an {approx}1 stage interval difference for S0/a to Sbc or Sc galaxies, which tend to appear 'earlier' in type at 3.6 {mu}m due to the slightly increased prominence of the bulge, the reduced effects of extinction, and the reduced (but not completely eliminated) effect of the extreme population I stellar component. We present an atlas of all of the 207 galaxies analyzed here and bring attention to special features or galaxy types, such as nuclear rings, pseudobulges, flocculent spiral galaxies, I0 galaxies, double-stage and double-variety galaxies, and outer rings, that are particularly distinctive in the mid-IR.

79 ASTRONOMY AND ASTROPHYSICS↗

EVOLUTION OF COLD STREAMS AND THE EMERGENCE OF THE HUBBLE SEQUENCE

A new physical framework for the emergence of the Hubble sequence is outlined, based on novel analyses performed to quantify the evolution of cold streams of a large sample of galaxies from a state-of-the-art ultra-high resolution, large-scale adaptive mesh-refinement hydrodynamic simulation in a fully cosmological setting. It is found that the following three key physical variables of galactic cold inflows crossing the virial sphere substantially decrease with decreasing redshift: the number of streams N {sub 90} that make up 90% of concurrent inflow mass flux, average inflow rate per stream M-dot {sub 90} and mean (mass flux weighted) gas density in the streams n {sub gas}. Another key variable, the stream dimensionless angular momentum parameter λ, is found to instead increase with decreasing redshift. Assimilating these trends and others naturally leads to a physically coherent scenario for the emergence of the Hubble sequence, including the following expectations: (1) the predominance of a mixture of disproportionately small irregular and complex disk galaxies at z ≥ 2 when most galaxies have multiple concurrent streams, (2) the beginning of the appearance of flocculent spirals at z ∼ 1-2 when the number of concurrent streams are about 2-3, (3) the grand-design spiral galaxies appear at z ≤ 1 when galaxies with only one major cold stream significantly emerge. These expected general trends are in good accord with observations. Early-type galaxies are those that have entered a perennial state of zero cold gas stream, with their abundance increasing with decreasing redshift.

79 ASTRONOMY AND ASTROPHYSICS↗

Zymomonas diversity and potential for biofuel production

Abstract Background Zymomonas mobilis is an aerotolerant α-proteobacterium, which has been genetically engineered for industrial purposes for decades. However, a comprehensive comparison of existing strains on the genomic level in conjunction with phenotype analysis has yet to be carried out. We here performed whole-genome comparison of 17 strains including nine that were sequenced in this study. We then compared 15 available Zymomonas strains for their natural abilities to perform under conditions relevant to biofuel synthesis. We tested their growth in anaerobic rich media, as well as growth, ethanol production and xylose utilization in lignocellulosic hydrolysate. We additionally compared their tolerance to isobutanol, flocculation characteristics, and ability to uptake foreign DNA by electroporation and conjugation. Results Using clustering based on 99% average nucleotide identity (ANI), we classified 12 strains into four clusters based on sequence similarity, while five strains did not cluster with any other strain. Strains belonging to the same 99% ANI cluster showed similar performance while significant variation was observed between the clusters. Overall, conjugation and electroporation efficiencies were poor across all strains, which was consistent with our finding of coding potential for several DNA defense mechanisms, such as CRISPR and restriction–modification systems, across all genomes. We found that strain ATCC31821 (ZM4) had a more diverse plasmid profile than other strains, possibly leading to the unique phenotypes observed for this strain. ZM4 also showed the highest growth of any strain in both laboratory media and lignocellulosic hydrolysate and was among the top 3 strains for isobutanol tolerance and electroporation and conjugation efficiency. Conclusions Our findings suggest that strain ZM4 has a unique combination of genetic and phenotypic traits that are beneficial for biofuel production and propose investing future efforts in further engineering of ZM4 for industrial purposes rather than exploring new Zymomonas isolates.

09 BIOMASS FUELS↗

Export of Extracellular Polysaccharides Modulates Adherence of the Cyanobacterium Synechocystis

The field of cyanobacterial biofuel production is advancing rapidly, yet we know little of the basic biology of these organisms outside of their photosynthetic pathways. We aimed to gain a greater understanding of how the cyanobacterium Synechocystis PCC 6803 (Synechocystis, hereafter) modulates its cell surface. Such understanding will allow for the creation of mutants that autoflocculate in a regulated way, thus avoiding energy intensive centrifugation in the creation of biofuels. We constructed mutant strains lacking genes predicted to function in carbohydrate transport or synthesis. Strains with gene deletions of slr0977 (predicted to encode a permease component of an ABC transporter), slr0982 (predicted to encode an ATP binding component of an ABC transporter) and slr1610 (predicted to encode a methyltransferase) demonstrated flocculent phenotypes and increased adherence to glass. Upon bioinformatic inspection, the gene products of slr0977, slr0982, and slr1610 appear to function in O-antigen (OAg) transport and synthesis. However, the analysis provided here demonstrated no differences between OAg purified from wild-type and mutants. However, exopolysaccharides (EPS) purified from mutants were altered in composition when compared to wild-type. Our data suggest that there are multiple means to modulate the cell surface of Synechocystis by disrupting different combinations of ABC transporters and/or glycosyl transferases. Further understanding of these mechanisms may allow for the development of industrially and ecologically useful strains of cyanobacteria. Additionally, these data imply that many cyanobacterial gene products may possess as-yet undiscovered functions, and are meritorious of further study.

Fisher, ML↗

Trihalomethane precursor reactivity changes in drinking water treatment unit processes during a storm event

Source water quality can significantly impact the efficacy of water treatment unit processes and the formation of chlorinated and brominated trihalomethanes (THMs). Current water treatment plant performance models may not accurately capture how source water quality variations, such as organic matter variability, can impact treatment unit processes. To investigate these impacts, a field study was conducted wherein water samples were collected along the treatment train for 72 hours during a storm event. Systematic sampling and detailed analyses of water quality parameters, including non-purgeable organic carbon (NPOC), UV absorbance, and THM concentrations, as well as chlorine spiking experiments, reveal how the THM formation potential changes in response to treatment unit processes. Results show that the NPOC remaining after treatment has an increased reactivity towards forming THMs, and that brominated THMs form more readily than chlorinated counterparts in a competitive reaction. Thus both the reactivity and quantity of THM precursors must be considered to maintain compliance with drinking water standards, a finding that should be incorporated into the development of model-assisted treatment operation and optimization. Advanced granular activated carbon (GAC) treatment beyond conventional coagulation–flocculation–sedimentation processes may also be necessary to remove the surge loading of THM-formation precursors during a storm event.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recovery of Rare Earth Elements from Coal Mining Waste Materials

The objective of this proposed project was to locate coal overburden material that had rare earth elements (REEs) at concentrations of 300 ppm or higher. After securing the feedstock the next goal was to efficiently extract and purify the feedstocks to a purity of greater than 95%. A techno economic analysis was conducted to determine the economic viability of mining and processing REEs associated with Appalachian coal deposits. All aspects of mining, mineral processing, by-product potential, waste management, permitting and economics were examined. Attention was paid to the separation, degree of purification and marketing of Rare Earth elements. Along with REEs we evaluated the economics of the recovery of other metals of interest aong with the REEs. Our site location chosen was at the Jeddo Coal Site near Hazleton, Pennsylvania. The primary site was at the Upper Leigh High Mine. However, that changed to the North Eckley Mine site. We have analyzed a third site that will now be our second alternative to North Eckley. That site is the Highland mine site. This site is in a similar basin as the North Eckley site. During this project we evaluated various acids and extraction conditions. We have settled on using HCl as the acid of choice. One of the advantages of using HCl is it allows for easy removal of the highest contaminating metal, iron. When iron reacts with HCl in the presence of high chlorides it creates the anion complex FeCl 4 -1 . This FeCl 4 -1 complex will bind with an anion exchange resin. Greater than 99.8% of the iron is removed with this technique. Once the FeCl 4 -1 complex is bound to the anion exchange resin it can be released easily by just passing water over it. This water dilutes the FeCl 4 -1 to form FeCl 3 which is not anionic and therefore not attracted to the anion exchange resin. The FeCl 3 solution is a popular water flocculating agent used all over the world for water purification. We plan on this being one of our products produced. One of our goals was to create a multipurpose facility that was capable of handling multiple feedstocks. The proposed multipurpose facility will be able process all coal biproducts and coal products. These include 1.) clays that can easily be leached with ion exchange or acid 2.) Hard mineral deposits that can be leached with high pressure acid digestion 3.) Fly ash can be leached in the high-pressure acid digestion reactor. Fly ash is not a focus of this proposal but, the beneficial aspect of its utilization in this design cannot be overlooked. 4.) Acid Mine Drainage (AMD) Sludge is a high source of REE’s and can easily be dissolved to form a pregnant leach solution. Not shown on this simplified block flow diagram but crucial to its success is the recycle of acids. Our REE separation system is a continuous ion exchange process. The first stage is the separation of the non-REEs from the REEs. This is accomplished because the REEs are relatively larger than most of the non-REEs and typically have higher oxidation states (+3) than the non-REEs. In this step all the elements stick onto the column. However, as the columns are rinsed with various concentrations of acids different elements come off. For example, monovalent elements such as sodium and potassium elute off the column with a 1M HCl solution. Divalent elements such as calcium and magnesium do not elute until a 2M HCl solution is passed over the columns. The trivalent elements (REEs) are not eluted until a much higher concentrated acid is passed of the columns. Iron is also a trivalent, but it was removed in a prior anion exchange system. Aluminum is trivalent too, but it is much smaller than the REE atoms and elutes near the end of the 2 M HCl with the divalents. At the stage 2 and 3 our volume and masses have become too small to run on the continuous system. Therefore, we used a batch chromatography column or a flash chromatography column. The stage 2 process separates these REEs into 3 different fractions. A light, mid and heavy fraction. We calculated that we recovered greater than 90% of the REEs. This third column was packed with a different stationary phase. Five elements were chosen and purified to higher than 95% purity as shown by our internal testing. These elements were shipped to the DOE.

01 COAL, LIGNITE, AND PEAT↗

Integrated Anaerobic Membrane Bioreactor (AnMBR) – electro assisted fermentation platform for total resource recovery from diverse wastewaters

The overall objective of the project was to demonstrate a successful wastewater resource recovery platform comprising an Anaerobic Membrane Bioreactor (AnMBR) to achieve >50% Carbon sequestration efficiency as Volatile Fatty Acids (VFAs) or as methane gas from agricultural (animal feeding operations) wastewater along with the generation of final water exceeding Biological Nutrient Removal (BNR) standards for indirect potable reuse by coupling with constructed wetlands has been successfully accomplished. The AnMBR achieved stable performance over 350 days, removing 80–90% of COD and BOD₅ and recovering methane (0.17±0.07 L CH4/g COD at 66.5±0.03% v/v) at 3-5 LMH flux and 5-9 days HRT with 3-5% w/v total solids. Phosphorus recovery via CaO addition in an 80-L coagulation-flocculation-sedimentation unit ranged from 40.6% to 99.7%, yielding products with 11.4–13.6% P content and citric acid solubility of 32–38.6% P, comparable to rock phosphate mineral. Ammonium adsorption achieved ~94.5% recovery with exchange capacity of 10 – 16 g NH4-N/kg clinoptilolite. The CW polishing step met Kansas discharge standards for BOD5 and TN (<30 and <10 mg /L,) and approached the TP standard (~2.5 – 4 mg P/L). These findings have either already resulted in two peer reviewed publications, two patent applications, and one publication in conference proceedings.

42 ENGINEERING↗

Modeling Turbulence in Galactic Centers

Turbulence is a prevalent phenomenon in the interstellar medium, and in particular, the environment at the centers of galaxies. For example, detailed observations of the Milky Way’s Central Molecular Zone (CMZ) revealed that it has a complex and turbulent structure. Turbulence on galactic scales is often modeled using star formation and feedback. However, these effects do not appear to be sufficient for explaining the high-velocity dispersion observed in the CMZ, indicating that additional gas-stirring processes are likely to be operating. Here we introduce a proof-of-concept method to drive turbulence in gas that orbits under the influence of a galactic potential. Instead of relying on a particular physical mechanism, we have adopted a Fourier forcing module and have applied it using a smoothed particle hydrodynamics code. To test our method, we performed simulations of a simplistic model of the CMZ. Our turbulence injection method is capable of balancing the self-gravity of the gas, which allows us to run the simulations for long timescales and thereby follow the evolution of the CMZ. Our results show that turbulence induces a flocculent spiral pattern in our model, analogous to that found in galactic-scale simulations. Furthermore, we find that our turbulence injection method induces inward migration of gas, a result consistent with previous numerical simulations. We submit that this injection method is a promising new tool to simulate turbulence in galactic centers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fluid Induced Elemental and Mineralogy Alterations of Caney Shale

ABSTRACT: Studies were conducted on cores and rock cuttings recovered from two wells drilled in Caney shale in the Southern Oklahoma. Mineralogical compositions of these samples were obtained by X-Ray Diffraction (XRD) measurements using two methods of sample preparation: conventional powder (by crushing and grinding of rock fragments) and spray-drying of micronized rock powder method. Microstructure and microanalysis were acquired by Scanning Electron Microscopy/Energy Dispersive Spectroscopy (SEM/EDS). Batch experiments were then conducted using selected rock samples and fracturing fluid whilst deionized water was used as control sample for fluid/rock interaction. These were conducted at 95°C and ambient pressure for various time periods to assess the geochemical reactivity of the Caney shale. The rock samples were subsequently recovered from fluid, dried and analysis repeated using identical XRD and SEM/EDS measurements, following the same conditions. Preliminary experimental results show rock mineralogical compositions are predominantly quartz with relatively high clay content. The clay minerals are mainly illite. Carbonate content is less than 10% by weight for most samples, with other non-clay minerals pyrite, albite, dolomite, and some apatite. In general, sprayed samples showed more intense peaks and less full width at half maxima (FWHM) relative to conventional rock-powder samples. Post-experimental mineralogical changes were observed in samples with clay portions breaking down to amorphous entities. As expected, dissolution of carbonates (calcite and dolomite) was observed and newly detected dissolution of biogenic micro quartz resulted in formation of amorphous silica. 1.0 INTRODUCTION Formation of sedimentary rocks involves processes where rock sediments are emplaced with fluids starting interactions that persist over long periods. During the lithification process, sediments and fluids react and attain equilibrium state. This equilibrium is disturbed during drilling, completion, hydraulic fracturing and other operations that involve the introduction of engineered fluids into the subsurface. To return to equilibrium, dissolution and precipitation of minerals may occur. These reactions have implications on the petrophysical properties of the reservoir. Whiles dissolution and precipitation of minerals can enhance porosity and permeability, the reverse can also be true. For example, when acidic fluids are introduced into formations with high carbonate contents, carbonate minerals dissolve into solution thus increasing the porosity and permeability of the formation. In contrast, when alkaline fluids with pH above 11 are introduced into an illite-rich shale formation, the rock-fluid interaction leads to de-flocculation of illite platelets causing substantial increase in clay fines migration, consequently significant reduction in permeability (Salles et al., 2008).

Awejori, G.↗

Polyelectrolytes with high charge density

Polymers can be used as flocculants to clarify residential and industrial water supplies and as bactericidal and fungicidal agents. They can be used in preparation of electroconductive photocopy papers, to improve living cell adhesion to glass or plastic, and as anticancer agents.

Rembaum, A.↗