Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “F2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Evolution of the ionosphere

Studies were made of the electron density profiles at various stages of atmospheric evolution, with the assumption that the atmospheric composition has changed due to the gradual increase of oxygen while the nitrogen level has remained constant. The result of model calculations indicates that when the oxygen content is less than about 1% of the present earth's atmosphere level, the major ions in the F2 region will change from O(+) to N(+). The maximum number density of N(+) ions reaches approximately 10 million per cu cm because of the absence of a rapid loss mechanism for N(+). The height of the N(+) ion density peak is much lower than the height of the F2 layer peak of the current ionosphere.

Shimizu, M.↗
NASA NTRS1976

F-region enhancements induced by solar flares

ATS-6 total electron content (NT) observations during solar flares exhibit four types of response: (1) a sudden increase in NT (SITEC) for about 2 min with several maxima in growth rate, then a maximum or a distinct slowing in growth, followed by a slow smooth increase to a flat peak, and finally a slow decay in NT; (2) a SITEC that occurs during ionospheric storms, where NT decays abruptly after the first maximum; (3) slow enhancements devoid of distinct impulsive structure in growth rate; and (4) no distinct response in NT, even for relatively large soft X-ray flares. Flare-induced increases in NT are dominated by low-loss F2 ionization produced by 90-911-A emission. The impulsive flare component is relatively intense in the 90-911-A range, but is short lived and weak for flares near the edge of the visible solar disk and for certain slow flares. The impulsive flare component produces the rapid rise, the sharp maxima in growth rate, and the first maximum in SITECs. The slow flare components are strong in the 1-90-A range but relatively weak in the 90-911-A range and accumulatively contribute to the second maximum in type 1 and 3 events, except during storms when F2 loss rates are abnormally high in type 2 events.

Donnelly, R. F.↗
NASA NTRS1977

Spontaneous emission from ScF in a supersonic mixing flame

An investigation was conducted of the two reactions: Sc + F2 yields ScF(asterisk) + F and Y + Cl2 yields YCl(asterisk) + Cl. Experiments were designed for studying the reactions under the relatively high pressure conditions (5-20 torr) appropriate for chemical laser operation. A shock tube was used to provide a short duration flow through a supersonic nozzle array. Shock wave heating is used to dissociate the ScCl3 or YCl3 at temperatures of about 6000 K, before the gases are accelerated and expanded through the supersonic nozzle array. The expanded primary flow is then mixed with a secondary flow of F2 introduced through slots at the trailing edge of each nozzle blade. Graphs show the temporal behavior of the visible spontaneous emission over the range from 3000 to 9000 A for a typical test condition, a microdensitometer tracing of the visible emission over the range from 4000 to 7000 A, and the spontaneous emission from ScF(asterisk) obtained by computer image processing of intensity data.

Fischell, D. R.↗
NASA NTRS1983

Evaporation from a partially wet forest canopy

The results of experimental studies of water storage in a Sitka-spruce canopy are presented and analyzed in terms of model simulations of evaporation. Wet-branch cantilever deflection was measured along with meteorological data on three days in August, 1976, to determine the relationship of canopy evaporation to wind speed and (hence) aerodynamic resistance. Two versions of a simple unilayer model of sensible and latent heat transport from a partially wet canopy were tested in the data analysis: model F1 forbids the exchange of heat between wet and dry foliage surfaces; model F2 assumes that this exchange is highly efficient. Model F1 is found to give results consistent with the rainfall-interception model of Rutter et al. (1971, 1975, 1977), but model F2 gives results which are more plausible and correspond to the multilayer simulations of Sellers and Lockwood (1981) and the experimental findings of Hancock and Crowther (1979). It is inferred that the role of eddy diffusivity for water vapor is enhanced relative to momentum transport, and that the similarity hypothesis used in conventional models may fail in the near vicinity of a forest canopy.

Hancock, N. H.↗
NASA NTRS1986

The calculation of theoretical chromospheric models and the interpretation of solar spectra from rockets and spacecraft

Calculated results based on two chromospheric flare models F1 and F2 of Machado, et al., (1980) are presented. Two additional models are included: F1*, which has enhanced temperatures relative to the weak-flare model F1 in the upper photosphere and low chromosphere, and F3 which has enhanced temperatures relative to the strong flare model F2 in the upper chromosphere. Each model is specified by means of a given variation of the temperature as a function of column mass. The corresponding variation of particle density and the geometrical height scale are determined by assuming hydrostatic equilibrium. The coupled equations of statistical equilibrium is solved as is radiative transfer for H, H-, He I-II, C I-IV, Si I-II, Mg I-II, Fe, Al, O I-II, Na, and Ca II. The overall absorption and emission of radiation by lines throughout the spectrum is determined by means of a reduced set of opacities sampled from a compilation of over 10 to the 7th power individual lines. That the white flight flare continuum may arise by extreme chromospheric overheating as well as by an enhancement of the minimum temperature region is also shown. The radiative cooling rate calculations for our brightest flare model suggest that chromospheric overheating provides enhanced radiation that could cause significant heating deep in the flare atmosphere.

Avrett, E. H.↗
NASA NTRS1986

A method for extracting meridonal winds from ionosonde measurements by using ionospheric models

There has been great progress in modelling and measuring the dynamics of the neutral upper atmosphere in recent years. However, future progress will depend on the availability of global measurements of neutral winds. Attention is drawn to a relatively cheap means of supplementing the data base of neutral winds provided by radar and optical measurements with data obtained by ionosondes. Rishbeth in his review of F-region dynamics, derived the relationship between the height of the F2 layer and the component of the neutral wind parallel to the magnetic field of the Earth. The sensitivity is examined of the height and density of the F2 layer over Boulder, Colorado on 30 July 1982 to changes in meridional wind speed using a comprehensive interhemispheric numerical model that solves the continuity and momentum equations for H+ and O+, the energy equations for Te and Ti, and the 2-stream photoelectron equations to obtain electron heating rates. For the neutral atmosphere temperature and densities, the mass spectrometer incoherent scatter radar model of Hedin was used.

Richards, P. G.↗
NASA NTRS1985

Chromosphere flare models

Further calculated results based on the F1 and F2 chromospheric models of Machado et al. (1980) are presented in addition to results from a model with enhanced temperatures relative to the weak-flare model F1 in the upper photosphere and low chromosphere, and from a model with enhanced temperatures relative to the strong flare model F2 in the upper chromosphere. The coupled equations of statistical equilibrium and radiative transfer for H, H(-), He I-II, C I-IV, Si I-II, Mg I-II, Fe, Al, O I-II, Na, and Ca II are solved, and the overall absorption and emission of radiation by lines throughout the spectrum are determined by means of a reduced set of opacities taken from a compilation of over 10 million lines. Semiempirical models show that the white light flare continuum may arise by extreme chromospheric overheating, as well as by an enhancement of the minimum temperature region.

Avrett, E. H.↗
NASA NTRS1990

Ultraviolet observations of the enigmatic bipolar nebula M1-92

IUE observations of the bipolar nebula M1-92 indicate that this object is an evolved object and possibly a preplanetary nebula. Data acquired in the SWP camera clearly show a flat UV continuum indicative of a relatively unobscured O subdwarf. Data acquired in the long wavelength region of the SWP and in the LWP camera reveal an object which mimics the characteristics of an F2 supergiant. These results, combined with other data at visual and infrared wavelengths, strongly favor that the central object of M1-92 is an evolved binary system. The He I 5876 and 6678 A absorption seen in optical spectra is extremely problematic. This, plus the presence of Fe II, Mg II, and Mg I absorption arising from resonance transitions and transitions from low-lying metastable levels, leads to the suggestion that the object resembling an F2 star is actually an early-type subdwarf cloaked in a thick circumstellar nebula. This interpretation and the similarities of the IR flux distribution to Vy 2-2, a preplanetary prototype, is consistent with M1-92 being in the process of forming a planetary nebula. The bipolar flow, the optical Fe II and ultraviolet Mg II emission of M1-92 are also characteristics of T Tauri stars. Although constraints definitely rule out that M1-92 is a pre-main-sequence object, these similarities imply that in many cases it may be difficult to distinguish between T Tauri stars and protoplanetary nebulae.

Feibelman, Walter A.↗
NASA NTRS1992

Solar EUV index for aeronomical studies at earth from Langmuir probe photoelectron measurements on the Pioneer Venus orbiter

A solar EUV index for aeronomical studies at earth, obtained from the Langmuir probe measurement of photoelectron current on the Pioneer Venus orbiter, is presented. To examine the potential of E sub EUV as a solar EUV flux index, the behavior of ionospheric parameters f sub 0 E, f sub 0 F1, and f sub 0 F2 are studied at midlatitude stations, and their relationship with E sub EUV and with the 10.7-cm solar radio flux is compared. f sub 0 F1 and f sub 0 F2 are found to be better correlated with E sub EUV than with the 10.7-cm flux. F sub 0 E is better correlated with the 10.7-cm flux, because the 10.7-cm flux is also a proxy for soft X-rays, which are an important ionizing source in the E region. A table is also presented for the EUV index, E sub EUV, for the period February 12, 1979, through most of 1991.

Hoegy, W. R.↗
NASA NTRS1993

Thermodynamic data for fifty reference elements

This report is a compilation of thermodynamic functions of 50 elements in their standard reference state. The functions are C(sub p)(sup 0), (H(sup 0)(T) - H(sup 0)(0)), S(sup 0)(T), and -(G(sup 0)(T) - H(sup 0)(O)) for the elements Ag, Al, Ar, B, Ba, Be, Br2, C, Ca, Cd, Cl2, Co, Cr, Cs, Cu, F2, Fe, Ge, H2, He, Hg, I2, K, Kr, Li, Mg, Mn, Mo, N2, Na, Nb, Ne, Ni, O2, P, Pb, Rb, S, Si, Sn, Sr, Ta, Th, Ti, U, V, W, Xe, Zn, and Zr. Deuterium D2 and electron gas e(sup -) are also included. The data are tabulated as functions of temperature as well as given in the form of least-squares coefficients for two functional forms for C(sub p)(sup 0) with integration constants for enthalpy and entropy. One functional form for C(sub p)(sup 0) is a fourth-order polynomial and the other has two additional terms, one with T(exp -1) and the other with T(exp -2). The gases Ar, D2, e(sup -), H2, He, Kr, N2, Ne, O2, and Xe are tabulated for temperatures from 100 to 20,000 K. The remaining gases Cl2 and F2 are tabulated from 100 to 6000 K and 1000 to 6000 K. The second functional form for C(sub p)(sup 0) has an additional interval from 6000 to 20,000 K for the gases tabulated to 20,000 K. The fits are constrained so that the match at the common temperature endpoints. The temperature ranges for the condensed species vary with range of the data, phase changes, and shapes of the C(sub p)(sup 0) curves.

Mcbride, Bonnie J.↗
NASA NTRS1992

Lunar mining of oxygen using fluorine

Experiments during the first year of the project were directed towards generating elemental fluorine via the electrolysis of anhydrous molten fluorides. Na2SiF6 was dissolved in either molten NaBF4 or a eutectic (minimum-melting) mixture of KF-LiF-NaF and electrolyzed between 450 and 600 C to Si metal at the cathode and F2 gas at the anode. Ar gas was continuously passed through the system and F2 was trapped in a KBr furnace. Various anode and cathode materials were investigated. Despite many experimental difficulties, the capability of the process to produce elemental fluorine was demonstrated.

Burt, Donald M.↗
NASA NTRS1994

Ionoshperic effects of the March 1990 magnetic storm: Comparison of theory and measurement

This paper presents a comparison of the measured and modeled ionospheric response to magnetic storms at Millstone Hill and Arecibo during March 16-23, 1990. Magnetic activity was low until midday Universal Time (UT) on day 18 when Kp reached 6, days 19 and 20 were quiet, but a large storm occurred around midnight UT on day 20 (Kp=7) ad it was a moderately disturbed (Kp=4) for the remainder of the study period. At Millstone Hill, the daytime peak density (Nm F2) showed only a modest 30% decrease in response to the first storm and recovered to prestorm values before the onset of the second storm. The model reproduces the daytime peak electron density well for this period. However, the severe storm on March 20 caused a factor of 4 deplection in electron density, while the model densities were not greatly affected. the inclusion of vibrationally excited nitrogen N2(sup *) in the model was unable to account for the observed large electron density depletions afterward March 20. The storm did not appear to affect the overall magnitude of the electron density at Arecibo very much, but did cause unusual wavelike structure in the peak density and peak height following the storm. The model reproduces the daytime Nm F2 very well for Arecibo, but after sunset the model densities decay too rapidly. This study indicates that successful modeling of severe ionospheric stroms will require better definition of the storm time inputs, especially of the neutral atmosphere.

Richards, P. G.↗
NASA NTRS1994

Solar activity variations in midlatitude thermospheric meridional winds

Upper thermospheric meridional wind data at midlatitudes and for low magnetic activity are examined for solar activity variations following an analysis scheme suggested by a Coordinated Analysis of the Thermosphere workshop. Wind data from incoherent scatter, Fabry-Perot, and F2 peak heights show decreasing diurnal amplitudes with increasing solar activity during all seasons, except for Saint Santin data, which show a slight increase in summer. Equivalent winds from F2 peak height data have strong decreases in diurnal amplitude in all seasons. The coupled thermosphere ionosphere model and thermosphere ionosphere global circulation model predictions of diurnal amplitude, while differing considerably in magnitude, also show decreasing amplitudes during all seasons except summer, while the HWM90 empirical model amplitudes increase slightly with solar activity during all seasons. The diurnal mean wind trends with solar activity are fairly weak, except for Millstone Hill incoherent scatter radar, which shows a shift from strong southward to near zero or northward wind with increasing activity. Model results for the mean generally fall within the band of measurements. Near midnight, most of the data also show that the typically southward winds weaken with increasing solart activity in all seasons except summer, when results are mixed. There are significant differences between the trends and between absolute values for the various data sets and models which need further investigation.

Hedin, A. E.↗
NASA NTRS1998

In Situ Infrared Spectroscopy of the Gaseous Species Present in a Diamond Chemical Vapor Deposition System

We interfaced a Hot-Filament Chemical Vapor Deposition (HFCVD) system to the emission port of an FT-IR spectrometer, in order to study the gas phase species present during the deposition of diamond thin films. The implementation of the infrared (IR) emission technique in situ allowed the study of various carbon-containing species believed to be crucial in diamond film growth. The two IR-active vibrational fundamentals of methane, v(3)(f2) and v(4)(f2), were observed at three different filament temperatures: 1000, 1500 and 2000 C. However, the net signal of v(3) was emission, while that of v(4) was absorption. These results indicate that the v(4) fundamental is excited beyond equilibrium, while the v(3) fundamental remains mostly in the ground state. This is due to the small concentration of methane, the low energy of v(4) compared to v(3) or to the Hz vibrational mode, and symmetry considerations that forbid interaction among the four fundamentals of methane. Thus, the excitation of v(3) is more likely than its decay under HFCVD conditions, producing a non-equilibrium population. At a filament temperature of 2000 C, the v(3) (sigma(+)(3)) fundamental of acetylene and a band at 1328 cm-l also ascribed to acetylene (v5 (pi(U)) + v4) appear in net absorption. This correlates well with the onset of molecular hydrogen breaking by the filament, which occurs at temperatures around 2000 C and above. The hydrogen atoms produced in this heterogeneous reaction give rise to a chain of reactions that lead to acetylene, among other carbonaceous species.

Morell, G.↗
NASA NTRS2001

Thermodynamic Data for Fifty Reference Elements

This report is a compilation of thermodynamic functions of 50 elements in their reference state. The functions are: C(sup 0, sub p), {H(T)-H(sup 0)(0)}, S(sup 0)(T), and - {G(sup 0)(T) - H(sup 0)(0)} for the elements Ag, Al, Ar, B, Ba, Be, Br2, C, Ca, Cd, Cl2, Co, Cr, Cs, Cu, F2, Fe, Ge, H2, He, Hg, I2, K, Kr, Li, Mg, Mn, Mo, N2, Na, Nb, Ne, Ni, O2, P, Pb, Rb, S, Si, Sn, Sr, Th, Th, Ti, U, V, W, Xe, Zn, and Zr. Deuterium D, and electron gas e(sup -) are also included. The data are tabulated as functions of temperature as well as given in the form of least-squares coefficients for two functional forms for C(sup 0, sub p) with integration constants for enthalpy and entropy. One functional form for C(sup 0, sub p) is a fourth-order polynomial and the other has two additional terms, one with T(sup -1) and the other with T(sup -2). The gases Ar, D2, e(sup -), H2, He, Kr, N2, Ne, O2, and Xe are tabulated for temperatures from 100 to 20 000 K. The remaining gases Cl2 and F2 are tabulated from 100 to 6000 K. The polynomial functional form for C(sup 0, sub p) for all these gases is split into two temperature intervals of 200 to 1000 K and 1000 to 6000 K. The second functional form for (sup 0, sub p) has an additional interval from 6000 to 20 000 K for the gases tabulated to 20 000 K. The fits are constrained so that the properties match at the common temperature endpoints. The temperature ranges for the condensed species vary with range of the data, phase changes, and shapes of the C(sup 0, sub p) curves.

McBride, Bonnie J.↗
NASA NTRSDate not supplied

GLDAS-2 Land Surface Model Data and Data Services at NASA GES DISC

The goal of the NASA Global Land Data Assimilation System (GLDAS, https://ldas.gsfc.nasa.gov/gldas(https://ldas.gsfc.nasa.gov/gldas)) is to generate optimal fields of land surface states and fluxes by ingesting satellite- and ground-based observational data products, using advanced land surface modeling and data assimilation techniques (Rodell et al., 2004).The GLDAS dataset currently archived at and distributed by the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC, https://disc.gsfc.nasa.gov/ (https://disc.gsfc.nasa.gov/)) is GLDAS Version 2 (GLDAS-2). It contains a series of output fields from the upgraded Noah-3.6, Catchment-F2.5, and VIC-4.1.2 Land Surface Models (LSMs) in the Land Information System (LIS-V7, https://lis.gsfc.nasa.gov/ (https://lis.gsfc.nasa.gov/)). GLDAS-2 has three components:GLDAS-2.0, GLDAS-2.1, and GLDAS-2.2. GLDAS-2.0 is forced entirely with the upgraded Princeton Meteorological ForcingV2.2 Dataset and provides a temporally consistent series from 1948 through 2014. GLDAS-2.1 is forced with a combination of model and observation data, with data spanning from 2000 to the present. The GLDAS-2.2 product suite uses data assimilation(DA), whereas the GLDAS-2.0 and GLDAS-2.1 products are "open-loop" (i.e., no data assimilation). The choice of forcing data, as well as DA observation source, variable, and scheme, varies for different GLDAS-2.2 products. The currently availableGLDAS-2.2 data contain a daily 0.25-degree output from the Catchment-F2.5 LSM in LIS-V7. The data are forced with the meteorological analysis fields from the operational European Centre for Medium-Range Weather Forecasts Integrated Forecasting System (ECMWF-IFS) and assimilated with GRACE and GRACE-FO data, ranging from February 1, 2003 to the present. The current GLDAS-2.0 and 2.1 Noah LSM data were reprocessed in November 2019 and January 2020 respectively and their data from Catchment and VIC LSMs are new to the GLDAS-2 collection. This presentation provides a summary of theGLDAS-2 data products, their land surface fields, and their related data services at the GES DISC; and a description of the majorGLDAS-2 climatological characteristics as well as the intercomparison with the data of the previous version.

Hydrology↗
NASA NTRSDate not supplied

Sleep, Sleepiness, and Performance Across Three In-Flight Bunk Rest Opportunities

Introduction: Airline pilots are required to take a rest break in a bunk during long-haul flights in an effort to reduce sleepiness during critical phases of flight. It is unclear, however, whether each rest break affords equal opportunity for sleep. We aimed to characterize sleep, sleepiness, and performance outcomes across three in-flight rest breaks during long-haul flights. Methods: Thirty-seven pilots wore actiwatches and completed sleep diaries for approximately two weeks while flying a variety of long-haul routes (n=126 flights). Self-reported in-flight bunk rest (BR) periods were used to set rest intervals and sleep was estimated within these intervals using actigraphy software (wake threshold set to medium). Pilots provided Karolinska Sleepiness Scale ratings (KSS) and performed a 5-minute psychomotor vigilance task (PVT) before landing. A linear mixed-effects model with participant included as a random effect and allowed to vary by intercept was used to assess differences between BR opportunities. Results : The majority (97%, n=122) of bunk rest periods contained sleep (as estimated by actigraphy). The mean (+/- standard deviation) sleep duration for the first, middle, and third BR opportunity was 152.8 (69.7), 149.2 (44.1), 125.2 (44.9) minutes, respectively. There was a significant effect of BR opportunity for sleep duration (F2,54 = 3.747, p=.03) and KSS (F2,44 = 7.869, p=.001). Bonferroni adjusted planned pairwise contrasts revealed that pilots using the third BR obtained significantly less sleep than in the first BR (p=.029). KSS ratings prior to landing were higher for the third BR compared to both the first (p=.001) and middle BR (p=.017). There were no significant differences for PVT speed or lapses (all p>05). Conclusion: These results suggest that the last rest break is associated with shorter sleep, lower alertness, and no differences in performance relative to the other rest breaks. Further analysis is required to determine whether the higher KSS ratings following the third rest break are associated with sleep inertia, or whether other factors may be involved.

sleepiness↗
DOE OSTI2023

Analysis of Unpolarised p+p¿ Photoproduction with the GlueX Experiment

This thesis presents measurements of spin-density matrix elements in unpolarised p+p? photoproduction on a proton target. The dominant resonance contribution to the dipion system is the r(770) meson. Due to the large production cross section for this resonance, a valid comparison can be made between the obtained final results and r(770) spin-density matrix elements measured previously with other experiments. The measurement was performed over the 3:0 ? 11:6 GeV beam energy regime, which is a more extensive energy range than has ever been studied previously for the r(770). Results were obtained by analysing data from the GlueX experiment based at Jefferson Lab. Extended maximum likelihood fits were applied to extract three spin-density matrix elements using Markov chain Monte Carlo based parameter estimations. This was performed using various binning configurations to probe the energy, mass, and four-momentum transfer dependence of the determined physics observables. Spin-density matrix elements are shown to be consistent with the model of s-channel helicity conservation at low ?t. The effects of pomeron and f2 exchanges are clearly visible in the energy dependence of the measured observables. These observations provide valuable insights into the relative strengths of both processes as a function of the photon energy, and may enable theorists to disentangle the f2=P coupling ratio. Spin-density matrix elements are seen to be highly dependent on the reconstructed resonance mass. This observation is likely to be a result of non-resonant S-wave background processes, and emphasises the need for a more detailed model of the p+p? angular distribution that considers all of the competing angular momentum components that contribute to the measured final state. The statistical precision of measurements performed for this thesis surpass what was achievable in previous studies of the r(770) by several orders of magnitude. Studies of the energy and four-momentum transfer dependence, and insights into the effects of non r(770) background contributions provide valuable input for production models. This will help inform the choice of wave-sets used for partial wave analyses, supporting GlueX in its search for exotic hybrid meson states.

Fitches, James↗