Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Extremism”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Distributed Motor Controller (DMC) for Operation in Extreme Environments

This paper presents an extreme environment capable Distributed Motor Controller (DMC) module suitable for operation with a distributed architecture of future spacecraft systems. This motor controller is designed to be a bus-based electronics module capable of operating a single Brushless DC motor in extreme space environments: temperature (-120 C to +85 C required, -180 C to +100 C stretch goal); radiation (>;20K required, >;100KRad stretch goal); >;360 cycles of operation. Achieving this objective will result in a scalable modular configuration for motor control with enhanced reliability that will greatly lower cost during the design, fabrication and ATLO phases of future missions. Within the heart of the DMC lies a pair of cold-capable Application Specific Integrated Circuits (ASICs) and a Field Programmable Gate Array (FPGA) that enable its miniaturization and operation in extreme environments. The ASICs are fabricated in the IBM 0.5 micron Silicon Germanium (SiGe) BiCMOS process and are comprised of Analog circuitry to provide telemetry information, sensor interface, and health and status of DMC. The FPGA contains logic to provide motor control, status monitoring and spacecraft interface. The testing and characterization of these ASICs have yielded excellent functionality in cold temperatures (-135 C). The DMC module has demonstrated successful operation of a motor at temperature.

SiGe↗
NASA NTRS2012

Methods for Improving Long-Range Wireless Communication Between Extreme Terrain Vehicles

Axel is an extreme terrain, two-wheeled rover designed to traverse rocky surface and sub-surface landscapes in order to conduct remote science experiments in hard-to-reach locations. The rover's design meets many requirements for a mobile research platform capable of reaching water seeps on Martian cliff sides. Axel was developed by the Mobility and Robotic Systems section at the Caltech Jet Propulsion Laboratory. Unique design criteria associated with extreme terrain mobility led to a unique rover solution, consisting of a central module, which provides long-term energy storage and space for large-scale science payloads, and two detachable Axels that can detach and explore extreme terrain locations that are inaccessible to conventional rovers. The envisioned mission could involve a four-wheeled configuration of Axel called 'DuAxel' that is able to traverse the benign, flattened terrain of a landing site and approach the edge of the targeted crater or cave where it would deploy anchoring legs and detach one of the Axel rovers [1]. A tether provides a secure link between the Axel rover and the central module, acting as an anchor to allow Axel to descend along steep crater walls to collect data from the scientifically relevant sites along the water seeps or crater ledges. After completing its scientific mission Axel would hoist itself up to the central module and dock autonomously (using its on-board stereo cameras), allowing the once-again recombined DuAxel to travel to another location to repeat data collection.

wireless communication↗
NASA NTRS2020

Effect of Irrigation on Humid Heat Extremes

Most studies of irrigation as an anthropogenic climate forcing focus on its cooling effects. However, irrigation also increases humidity, and so may not ameliorate humid heat and its extremes. We analyzed global climate model results over hot locations and seasons at high temporal resolution to estimate the impact of irrigation on humid heat extremes, quantified as different percentiles of wet-bulb temperature (T(sub w)), under contemporary conditions. We found that although irrigation reduced temperature, the median and higher percentiles of T(sub w) on average did not decrease. Increases in T(sub w) percentile values and increases in frequency of dangerous T(sub w) of several days per year due to irrigation were found in some densely populated regions, including the central United States and the Middle East, while the Ganges basin saw reduced T(sub w). Changes in T(sub w) were partly associated with the differential regional impacts of irrigation on moisture transport. These results underline the importance of considering impacts of climate forcings on humidity as well as temperature in evaluating associated effects on heat extremes.

Irrigation↗
NASA NTRSDate not supplied

All-Metal Antennas for Applications in Extreme Space Environments

The feasibility of an all-metal antenna for transmission of science data by spacecraft, landers, and rovers operating in the extreme environment of space is investigated. The all-metal antenna is of the short backfire type with a waveguide feed and generates a linearly polarized radiation. The investigation includes the modeling, design, fabrication, and characterization of the antenna. The paper summarizes the preliminary results. Potential applications of an all-metal antenna include communication systems required to operate in the extreme hot environment of Mercury and Venus, extreme cold and high radiation environment of Jupiter’s icy moon, and Artemis missions that involve human/robotic exploration and long-term presence on the Moon.

Extreme Environment↗
NASA NTRSDate not supplied

All-Metal Antennas for Applications in Extreme Space Environments

The feasibility of an all-metal antenna for transmission of science data by spacecraft, landers, and rovers operating in the extreme environment of space is investigated. The all-metal antenna is of the short backfire type with a waveguide feed and generates a circularly polarized radiation. The investigation includes the modeling, design, fabrication, and characterization of the antenna. The paper summarizes the preliminary results. Potential applications of an all-metal antenna include communication systems required to operate in the extreme hot environment of Venus and in the extreme cold and high radiation environment of Jupiter’s icy moon.

Antennas↗
NASA NTRS2023

The Extreme 2016 Wheat Failure in France

France suffered in 2016 the most extreme wheat yield decline in recent history, with some districts losing 55% yield. To attribute causes, we combined the largest coherent detailed wheat field experimental dataset with statistical and crop model techniques, climate information and yield physiology. The 2016 yield was composed of up to 40% fewer grains that were up to 30% lighter than expected across eight research stations in France. The flowering stage was affected by prolonged cloud cover and heavy rainfall when 31% of the loss in grain yield was incurred from reduced solar radiation and 19% from floret damage. Grain filling was also affected as 26% of grain yield loss was caused by soil anoxia, 11% by fungal foliar diseases and 10% by ear blight. Compounding climate effects caused the extreme yield decline. The likelihood of these compound factors recurring under future climate change is estimated to change with a higher frequency of extremely low wheat yields.

Extreme weather↗
NASA NTRS2023

A Multi-Satellite Framework to Rapidly Evaluate Extreme Biosphere Cascades: The Western US 2021 Drought and Heatwave

The increasing frequency and intensity of climate extremes and complex ecosystem responses motivate the need for integrated observational studies at low-latency to determine biosphere responses and carbon-climate feedbacks. Here, we develop a satellite-based rapid attribution workflow and demonstrate its use at a 1–2-month latency to attribute drivers of the carbon cycle feedbacks during the 2020-2021 Western US drought and heatwave. In the first half of 2021, concurrent negative photosynthesis anomalies and large positive column CO 2 anomalies were detected with satellites. Using a simple atmospheric mass balance approach, we estimate a surface carbon efflux anomaly of 132 TgC in June 2021, a magnitude corroborated 28 independently with a dynamic global vegetation model. Integrated satellite observations of hydrologic processes, representing the soil-plant-atmosphere continuum (SPAC), show that these surface carbon flux anomalies are largely due to substantial reductions in photosynthesis because of a spatially widespread moisture-deficit propagation through the SPAC between 2020 and 2021. A causal model indicates deep soil moisture stores partially drove photosynthesis, maintaining its values in 2020 and driving its declines throughout 2021. The causal model also suggests legacy effects may have amplified photosynthesis deficits in 2021 beyond the direct effects of environmental forcing. The integrated, observation framework presented here provides a valuable first assessment of a biosphere extreme response and an independent testbed for improving drought propagation and mechanisms in models. The rapid identification of extreme carbon anomalies and hotspots can also aid mitigation and adaptation decisions.

Causal model↗
NASA NTRSDate not supplied

GEER (Glenn Extreme Environments Rig): Current Project Status

Venus is Earth’s closest planetary neighbor, and it is often considered as Earth’s twin for its size and density. However, the extreme Venus surface conditions (temperatures of ~ 460 o C, pressure of ~90 bars, and reactive atmospheric chemical species such as supercritical CO 2 , sulfuric acid, and other toxic elements) results in short duration of Venus lander missions to date to survive for only 127 minutes. It is essential to enable multiple longer-lived Venus surface missions to understand the planet’s origin, history, climate, and interior. A systematic approach for future Venus lander material selection is to characterize and study the reactivity of high potential materials by exposing materials to a simulated Venus surface conditions. Glenn Extreme Environments Rig (GEER) at NASA’s Glenn Research Center (GRC) has been the leading facility simulating the high-temperature and pressure extremes of Venus as well as reproducing conditions of the gas mixture expected at the Venus surface since 2015. Here, we report on GEER’s recent accomplishments in assessing risks for future potential Venus missions and ongoing testing process and capability enhancement in supporting other planetary science missions.

GEER↗
NASA NTRSDate not supplied

Capabilities for Long-Duration Landers in Extreme Environments

Missions to the surface of planets that experience high temperatures, like Venus or Mercury, have had limited consideration and development in recent decades partially because of the extreme temperatures and environments the planets experience. In the case of Mercury this is up to 430C for nearly 30 days and for Venus almost 60 days at 460C. Several landers have been sent to Venus many decades ago but 127 minutes was the longest any operated on the surface. Venus, and Mercury, hold many mysteries and successful surface missions will result in compelling new science that will have significant bearing on us here on Earth. To enable this compelling new science, NASA has been developing capabilities for a small lander that is designed to operate for months in the extreme temperatures found on Venus and Mercury. The capabilities promise to enable new missions not yet considered. This work summarizes technical advances that are preparing us for long-duration (months) operations in extreme environments on other planets.

Extreme Environment Lander↗
NASA NTRS2024

Wear and Neutron Shielding Resilience of Titanium-Hexagonal Boron Nitride Coatings Against Extreme Lunar Radiation and Thermal Cycles

Ti6Al4V and Al6061 are aerospace alloys used in lunar structural components and rovers owing to their high specific strength. However, they deteriorate rapidly when subjected to demanding conditions of the lunar environment, such as extreme thermal cycles, solar particle radiation, and abrasive regolith. Cryo-milled powders were employed to deposit hBN-reinforced protective titanium coatings through plasma spray (atmospheric APS and vacuum-VPS) with 2 and 10 vol% of hBN on Ti6Al4V and Al6061 substrates. These coatings were evaluated for durability under extreme lunar-like conditions, including thermal cycling, electron radiation, and synergistic (electron radiation-thermal cycle) exposure. The coatings exhibited radiation-induced hardening, resulting in a substantial increase in their microhardness ~20–40% compared to virgin condition. Bright-field transmission electron microscopy (TEM) analysis reveals the presence of high dislocation densities, black dot defects, and dislocation clusters, providing evidence of the severe impact of synergistic environmental stresses. Ball-on-disk tribological tests were conducted in the presence of JSC-1 A lunar regolith simulant to evaluate the wear performance of coatings. Compared to conventional Ti6Al4V substrate, 50%, 90%, and 70% reductions in wear volume were observed in the Ti/2 vol% hBN coatings in thermal-only, radiation-only, and synergistic environments. Neutron shielding tests indicate that the synergistic coatings offer higher neutron shielding performance by up to 28% compared to virgin coatings, attributed to improved neutron capture by 10B isotopes. Upon a comprehensive assessment and ranking of multiple coatings under varying conditions, the VPS Ti/2 vol% hBN coating emerges as the top choice for protection against extreme radiation and thermal cycles for future lunar explorations.

Boron nitride↗
NASA NTRSDate not supplied

Materials for Power Transmission in Extreme Environments

NASA’s goal for a sustained human presence on the Moon and a future Lunar economy requires the development of novel power transmission materials for extreme environments. As an increasing number of public and private entities set their sights towards a future on the Moon, the demand for surface power will dramatically increase – potentially up to megawatt levels. A Lunar economy is envisioned to include a human habitat, manned and unmanned science exploration assets, excavation rovers and systems, and large-scale infrastructure construction such as solar arrays and power grids. A NASA trade study estimated that 1 to 3 km of power transmission lines (1 to 3 KV ac and dc) will be needed over time. Current high power and voltage SOA cables/wire can easily exceed 1 kg/m where mass is not as critical. Connectors, deployment spools and robots further increase the subsystem mass significantly increasing costs. On the other hand, advances in aeronautics provides path towards space missions. The operating environment on the Moon presents substantial risk to safe and reliable power transmission due to space weathering and degradation. These challenges include cosmic and UV radiation, extreme temperatures swings, the electrostatic Lunar exosphere, and the electrostatic and abrasive lunar regolith. The critical need for lightweight, safe and reliable power cables/wires materials is evident. In this presentation, the extreme high altitude and lunar environments and recent materials development from NASA Glenn Research Center’s High Voltage Materials team towards meeting NASA’s objectives and goals for aeronautics and space missions.

Cu/CNT conductors↗
NASA NTRSDate not supplied

Cloud-Based Time Series Analysis of Extremes: Use Cases and Applications

"Extreme weather events, such as hurricanes, tornadoes, floods, droughts, heatwaves, and blizzards, can cause widespread damage, disrupting ecosystems, agricultural production, and economies. The frequency and intensity of these events have been increasing, likely due to climate change, raising concerns and the need for more accurate analysis and predictions. NASA's Goddard Earth Sciences Data and Information Services Center (GES DISC) has migrated its long-term historical datasets, including precipitation data from MERRA-2 reanalysis, GLDAS land data assimilation, and IMERG satellite observations, to the cloud. This cloud-stored data enables scientists and researchers to utilize cloud computing for advanced modeling and forecasting of extreme weather events, eliminating the need to download large datasets. In this presentation, we will provide an overview of the cloud-based data and services managed by GES DISC; demonstrate methods for accessing and analyzing time series data stored in the cloud; and compare results across various datasets to address critical questions related to extreme precipitation. We will present use cases including: 1. Determining the average total precipitation in California during January and February from 2000 to 2024, and identifying anomalous precipitation in 2021. 2. Calculating the 10, 20, 50, and 100-year return periods for maximum daily rainfall based on 25 years of historical precipitation data (2000-2024) for Maryland.

time series↗
NASA NTRS1959

Effects of Nose Radius and Extreme Cooling on Boundary-Layer Transition for Three Smooth 15°-Cone-Cylinders in Free Flight at Mach Numbers to 8.50

Three highly polished 15°- included- angle cone- cylinders with hemispherical tips of several diameters ( 2, 3, and 4 in.) have been flown in order to obtain boundary- layer transition data at very low wall to local stream temperature ratios, and heat- transfer data. All surfaces had a 2-microinch average roughness height. Laminar flow existed over the entire hemispherical nose of the 2- and 3-inch-tip- diameter models throughout the complete flight history. Extreme cooling to wall to local stream temperature ratios at the sonic point as low as 0.20 did not cause transition on the nose for diameters as large as 3 inches. However, extreme cooling did cause early transition on the 4-inch model where it appears probable that transition occurred forward of the 45° station at a wall to local stream temperature ratio of about 0.26. Variations in tip diameter influenced transition downstream of the nose under conditions of extreme cooling. The 2-inch- tip model was laminar at all cone- cylinder stations at temperature ratios as low as 0.32 whereas the 3- and 4-inch-tip models were turbulent at the same local flow conditions but at higher wall to local temperature ratios. Transition on the cone and cylinder of the 3- and 4-inch- tip bodies appeared to be sensitive to local Mach number, and occurred at higher local temperature ratios when values of local Mach number were higher. Increasing the nose diameter from 2 to 3 inches significantly changed the local flow conditions for which laminar flow existed on the cone- cylinder afterbody. However, a further increase in tip size t o a 4-inch diameter had no discernable effect on the local flow conditions at transition. The transition results of the 3- and 4-inch-nose-diameter smooth bodies are similar to those observed on a 7/8-inch-nose-diameter body with roughened surfaces. Turbulent boundary layers resulted in both cases at very low wall to local stream temperature ratios. Both laminar and turbulent heat-transfer data were in good agreement with theoretical Stanton numbers when heat-transfer reduction due to tip blunting was considered.

CYLINDRICAL AFTERBODY↗
NASA NTRS1976

Extreme ultraviolet survey experiment MA-083

A grazing incidence telescope sensitive to radiation in the 5- to 100-nanometer band was flown in the Apollo service module. On 10 nighttime revolutions, the command and service module was maneuvered to point the instrument at 30 different stellar targets for periods of 1 to 20 minutes, thus constituting the first sensitive search for extreme ultraviolet radiation from nonsolar sources. Several hours of supplementary data were also obtained during nighttime orbits when other experiments in the scientific instrument module bay were operating. Preliminary analysis of a small fraction of the total data indicates the definite detection of a strong source of extreme ultraviolet radiation during observations made during revolution 109. The source is located in Coma Berencies. The suggested optical identification is the white dwarf HZ 43. If this association is correct, the star has the highest temperature of any known white dwarf. Regardless of the optical identification, however, this object is the first nonsolar source to be detected in the extreme ultraviolet band.

Bowyer, S.↗
NASA NTRS1985

Microbial ecology of extreme environments: Antarctic yeasts and growth in substrate-limited habitats

The high, dry valleys of the Ross Desert of Antarctic, characterized by extremely low temperatures, aridity and a depauperate biota, are used as an analog of the postulated extreme climates of other planetary bodies of the Solar System to test the hypothesis that if life could be supported by Ross, it might be possible where similar conditions prevail. The previously considered sterility of the Ross Desert soil ecosystem has yielded up an indigenous yeast, Cryptoccus vishniacci, which is able to resist the extremes of cold, wet and dry freezing, and long arid periods, while making minimal nutritional demands on the soil.

Vishniac, H. S.↗
NASA NTRS1986

High resolution spectroscopy of six new extreme helium stars

High resolution spectra of six newly discovered extreme helium stars are presented. LSS 5121 is shown to be a spectroscopical twin of the hot extreme helium star HD 160641. A preliminary LTE analysis of LSS 3184 yielded an effective temperature of 22,000 K and a surface gravity of log g = 3.2. Four stars form a new subgroup, classified by sharp-lined He I spectra and pronounced O II spectra, and it is conjectured that these lie close to the Eddington limit. The whole group of extreme helium stars apparently is inhomogeneous with respect to luminosity to mass ratio and chemical composition.

Heber, U.↗
NASA NTRS1988

Extreme ultraviolet reflectivity studies of gold on glass and metal substrates

The paper reports measurements of the extreme ultraviolet reflectivity of gold from 44 to 920 A at grazing incidence. Gold was deposited using vacuum evaporation and electroplating on substrates of glass and polished nickel, respectively. Measurements are also presented of the extreme ultraviolet reflectivity of electroless nickel in the same wavelength region, where one of the polished nickel substrates was used as a sample. Derived optical constants for evaporated and electroplated gold and electroless nickel are presented. Additional studies of the effects of various contaminants on the EUV reflectivity are also reported. The variations of the optical constants are discussed in terms of density variations, surface roughness and contamination effects. These results ae reported as part of studies for the Extreme Ultraviolet Explorer satellite program to determine acceptance criteria for the EUV optics, contamination budgets and calibration plans.

Jelinsky, Sharon R.↗
NASA NTRS1989

Analysis of extreme wind shear

New methods utilizing extreme value statistical theory are applied in the analysis of the largest wind component shear in a wind profile as a function of shear layer thickness and season. Seasonal variability of extreme shear decreases as the shear layer thickness decreases. Wind profile measurement system smoothing and its effect upon extreme wind shear statistics is simulated by application of digital low-pass filters to Jimsphere wind profiles.

Adelfang, Stanley I.↗