Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Enabling Function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Mojave firmware 1.09 FW valuation- Firmware 1.09 Results

This quick note outlines what we found after our conversion with you and your team. As suggested, we loaded 1547-2003 source requirements document (SRD) and then went back and loaded 1547-2018 SRD. This did result in implementing the new 1547-2018 settings. This short report focuses on the frequency-watt function and shows a couple of screen shots of the parameter settings via the Mojave HMI interface and plots of the results of the inverter with FW function enabled in both default and most aggressive settings response to frequency events. The first screen shot shows the 1547-2018 selected after selecting 1547-2003.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Modular Control Architecture for Scalable, Resilient, and Cybersecure Microgrids Test Results [Mojave firmware 1.09 FW valuation]

This quick note outlines what we found after our conversion with you and your team. As suggested, we loaded 1547-2003 source requirements document (SRD) and then went back and loaded 1547-2018 SRD. This did result in implementing the new 1547-2018 settings. This short report focuses on the frequency-watt function and shows a couple of screen shots of the parameter settings via the Mojave HMI interface and plots of the results of the inverter with FW function enabled in both default and most aggressive settings response to frequency events. The first screen shot shows the 1547-2018 selected after selecting 1547-2003.

42 ENGINEERING↗
DOE OSTI2026

Bioinspired Design of Dissipative Self-Assembly of Active Materials (Final Technical Report)

The major objective of this DOE-funded research program was to establish general, experimentally validated design principles for dissipative, out-of-equilibrium self-assembly of synthetic active materials. In living systems, structures such as actin filaments and microtubules are maintained far from thermodynamic equilibrium through continuous energy consumption. This persistent nonequilibrium operation enables functions including adaptability, self-healing, directed motion, and force generation—properties that are largely absent in traditional equilibrium soft materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Metasurfaces with Multipolar Resonances and Enhanced Light–Matter Interaction

Metasurfaces, composed of engineered nanoantennas, enable unprecedented control over electromagnetic waves by leveraging multipolar resonances to tailor light–matter interactions. This review explores key physical mechanisms that govern their optical properties, including the role of multipolar resonances in shaping metasurface responses, the emergence of bound states in the continuum (BICs) that support high-quality factor modes, and the Purcell effect, which enhances spontaneous emission rates at the nanoscale. These effects collectively underpin the design of advanced photonic devices with tailored spectral, angular, and polarization-dependent properties. This review discusses recent advances in metasurfaces and applications based on them, highlighting research that employs full-wave numerical simulations, analytical and semi-analytic techniques, multipolar decomposition, nanofabrication, and experimental characterization to explore the interplay of multipolar resonances, bound and quasi-bound states, and enhanced light–matter interactions. A particular focus is given to metasurface-enhanced photodetectors, where structured nanoantennas improve light absorption, spectral selectivity, and quantum efficiency. By integrating metasurfaces with conventional photodetector architectures, it is possible to enhance responsivity, engineer photocarrier generation rates, and even enable functionalities such as polarization-sensitive detection. The interplay between multipolar resonances, BICs, and emission control mechanisms provides a unified framework for designing next-generation optoelectronic devices. This review consolidates recent progress in these areas, emphasizing the potential of metasurface-based approaches for high-performance sensing, imaging, and energy-harvesting applications.

Kerker effect↗
DOE OSTI2025

Instant Folded Strings, Dark Energy and a Cyclic Bouncing Universe

We present a wholly self-consistent, complete cyclic bouncing cosmology based on components drawn from string theory and constructed in a way that is under perturbative control throughout (e.g., with temperature much less than the string scale and string coupling $g_s \ll 1$ at all times). The cyclic evolution is governed by standard dilaton-gravity in $(3+1)$-dimensions with a perturbatively generated potential and a coupling between the dilaton and a second field that becomes massless at $ϕ= ϕ_{ESP}$, resulting in an enhanced symmetry point (ESP) that prevents the dilaton from running all the way to zero coupling. A central role is played by instant folded strings (IFSs) - fundamental strings with the unusual property of being much lighter than the string mass while extending far beyond the string length, and violating the Null Energy Condition (NEC). IFSs are produced classically when the string coupling grows with time, which occurs at two critical points in each cycle. In turn, they fulfill a dual function: enabling cosmological bounces and initiating transient epochs of dark-energy domination that naturally transition into slow contraction. The resulting cosmology eliminates the cosmic singularity and multiverse problems of big bang inflationary models and robustly predicts time-varying IFS-induced dark energy and the absence of primordial B-mode polarization in the cosmic microwave background.

Cosmology and Nongalactic Astrophysics (astro-ph.C↗
DOE OSTI2018

Data from: An updated gene atlas for maize reveals organ-specific and stress-induced genes

Maize(Zea mays L.), a model species for genetic studies, is one of the two most important crop species worldwide.The genome sequence of the reference genotype, B73, representative of the stiff stalk heterotic group was recently updated (AGPv4) using long‐read sequencing and optical mapping technology. To facilitate the use of AGPv4 and to enable functional genomic studies and association of genotype with phenotype, we determined expression abundances for replicated mRNA‐sequencing datasets from 79 tissues and five abiotic/biotic stress treatments revealing 36,207 expressed genes. Characterization of the B73 transcriptome across six organs revealed 4,154 organ‐specific and 7,704 differentially expressed genes following stress treatment. Gene co‐expression network analyses revealed 12 modules associated with distinct biological processes containing 13,590 genes providing a resource for further association of gene function based on co‐expression patterns. Presence/absence variants (PAVs) previously identified using whole genome resequencing data from 61 additional inbred lines were enriched in organ‐specific and stress‐induced differentially expressed genes, suggesting PAVs may function in phenological variation and adaptation to environment. Relative to core genes conserved across the 62 profiled inbreds, PAVs have lower expression abundances which are correlated with their frequency of dispersion across inbreds and on average, have significantly fewer co‐expression network connections suggesting that a subset of PAVs may be on an evolutionary path to pseudogenization. To facilitate use by the community, we developed the Maize Genomics Resource website(maize.plantbiology.msu.edu) for viewing and data‐mining these resources and deployed two new views on the Maize electronic Fluorescent Pictograph Browser (bar.utoronto. ca/efp_maize)

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2014

Ground-based All-sky Mid-infrared and Visible Imagery for Purposes of Characterizing Cloud Properties

This paper describes the All Sky Infrared Visible Analyzer (ASIVA), a multi-purpose visible and infrared sky imaging and analysis instrument whose primary functionality is to provide radiometrically calibrated imagery in the mid-infrared (mid-IR) atmospheric window. This functionality enables the determination of diurnal hemispherical cloud fraction (HCF) and estimates of sky/cloud temperature from which one can derive estimates of cloud emissivity and cloud height. This paper describes the calibration methods and performance of the ASIVA instrument with particular emphasis on data products being developed for the meteorological community. Data presented here were collected during a field campaign conducted at the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) Climate Research Facility from May 21 to July 27, 2009. The purpose of this campaign was to determine the efficacy of IR technology in providing reliable nighttime HCF data. Significant progress has been made in the analysis of the campaign data over the past several years and the ASIVA has proven to be an excellent instrument for determining HCF as well as several other important cloud properties.

analyzer↗
DOE OSTI2015

Quantifying error of lidar and sodar Doppler beam swinging measurements of wind turbine wakes using computational fluid dynamics

Wind-profiling lidars are now regularly used in boundary-layer meteorology and in applications such as wind energy and air quality. Lidar wind profilers exploit the Doppler shift of laser light backscattered from particulates carried by the wind to measure a line-of-sight (LOS) velocity. The Doppler beam swinging (DBS) technique, used by many commercial systems, considers measurements of this LOS velocity in multiple radial directions in order to estimate horizontal and vertical winds. The method relies on the assumption of homogeneous flow across the region sampled by the beams. Using such a system in inhomogeneous flow, such as wind turbine wakes or complex terrain, will result in errors. To quantify the errors expected from such violation of the assumption of horizontal homogeneity, we simulate inhomogeneous flow in the atmospheric boundary layer, notably stably stratified flow past a wind turbine, with a mean wind speed of 6.5 m s -1 at the turbine hub-height of 80 m. This slightly stable case results in 15° of wind direction change across the turbine rotor disk. The resulting flow field is sampled in the same fashion that a lidar samples the atmosphere with the DBS approach, including the lidar range weighting function, enabling quantification of the error in the DBS observations. The observations from the instruments located upwind have small errors, which are ameliorated with time averaging. However, the downwind observations, particularly within the first two rotor diameters downwind from the wind turbine, suffer from errors due to the heterogeneity of the wind turbine wake. Errors in the stream-wise component of the flow approach 30% of the hub-height inflow wind speed close to the rotor disk. Errors in the cross-stream and vertical velocity components are also significant: cross-stream component errors are on the order of 15% of the hub-height inflow wind speed (1.0 m s −1 ) and errors in the vertical velocity measurement exceed the actual vertical velocity. By three rotor diameters downwind, DBS-based assessments of wake wind speed deficits based on the stream-wise velocity can be relied on even within the near wake within 1.0 s -1 (or 15% of the hub-height inflow wind speed), and the cross-stream velocity error is reduced to 8% while vertical velocity estimates are compromised. Furthermore, measurements of inhomogeneous flow such as wind turbine wakes are susceptible to these errors, and interpretations of field observations should account for this uncertainty.

17 WIND ENERGY↗
DOE OSTI2016

An inverse problem strategy based on forward model evaluations: Gradient-based optimization without adjoint solves

This study presents a new nonlinear programming formulation for the solution of inverse problems. First, a general inverse problem formulation based on the compliance error functional is presented. The proposed error functional enables the computation of the Lagrange multipliers, and thus the first order derivative information, at the expense of just one model evaluation. Therefore, the calculation of the Lagrange multipliers does not require the solution of the computationally intensive adjoint problem. This leads to significant speedups for large-scale, gradient-based inverse problems.

42 ENGINEERING↗
DOE OSTI2020

DER Planning with Resilience Analysis Using REopt Lite: A Behind-the-Meter Techno-Economic Analysis Tool

REopt Lite is a techno-economic decision support model for behind-the-meter energy systems design and dispatch modeling. REopt Lite is used to optimize energy systems for buildings, campuses, communities, and microgrids. It is based on a Mixed Integer Linear Programming (MILP) optimization model. It is a fully automated and streamlined energy modeling tool that can be used off-the-shelf for a wide variety of distributed generation integration analyses and at the same time is architected to be extensible for user-specific customizations for advanced users and subject matter experts. It is publicly available as a webtool as well as has an Application Programming Interface (API). The API functionality enables programmatic access to the model facilitating smooth integration with other distribution systems modeling tools, and automated multiple scenarios/sensitivity studies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Industrialized and Robotic Construction Advances in Terrestrial Construction and Opportunities in Space Construction

Advanced Building Construction (ABC) methods such as industrialized prefabrication and robotically controlled additive deposition are becoming promising technologies to support rapid construction of buildings at volume and scale. However, apart from the structural shell of the building, optimal integration of other systems – mechanical, electrical, plumbing, thermal, power generation, storage and distribution, is key to enabling functional buildings. Leveraging ABC methods to integrate such systems in the buildings requires the building design to be optimized for constructability constraints imposed by the industrialized and robotically controlled production setups entailing such ABC methods. The Industrialized Construction Innovation (ICI) team at the National Renewable Energy Laboratory (NREL) has been focusing on research and development of such ABC technologies and processes that can lead to production of buildings which are resilient to extreme climatic conditions at reduced cost and time. There is a potential synergy between such advancements in terrestrial construction, which can be leveraged for the benefit of space (orbital and extra-terrestrial) construction. Similarly, advances in space construction can lend itself to accelerated adoption of robotic construction methods in terrestrial construction. This presentation will give an overview of selective research efforts of the ICI team at NREL, along with a vision for potential collaborations with agencies like NASA.

3D printing↗
DOE OSTI2017

Use of immersive 3D virtual reality environments in control room validations - 203

Advanced technologies (e.g., virtual and augmented reality) may provide new possibilities to facilitate control room (CR) design and evaluation activities. We studied how immersive 3D environments may augment and advance the evaluation of safety-critical CR systems. The 3D virtual reality (VR) CR was compared with a real-life development simulator environment where hardwired panels were substituted with Virtual panels. A multi-user functionality enables several operators to be and collaborate in the same VR CR environment at the same time. There is also a realistic representation of emergency operating procedures in the VR CR. Spatial audio communication through headsets makes the experience even more realistic. The results section of the paper address both technical and human factors issues associated with the use of immersive 3D VR environments in CR validation tests, e.g.: amount of technical resources required as compared to normal validation in a real-life simulator environment, creation of methodologically new testing opportunities and new opportunities to data registration and analysis. (authors)

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Polymers depolymerizable by metathesis of a cleavable unit

Novel polymers are depolymerizable by metathesis of a cleavable unit. As an example, a series of linear and crosslinked polyurethanes were prepared that can be selectively depolymerized under mild conditions. Two unique polyols were synthesized bearing unsaturated units in a configuration designed to favor ring-closing metathesis to five- and six-membered cycloalkenes. These polyols were co-polymerized with toluene diisocyanate to generate linear polyurethanes and trifunctional hexamethylene- and diphenylmethane-based isocyanates to generate crosslinked polyurethanes. The polyol design is such that the ring-closing metathesis reaction cleaves the backbone of the polymer chain. Upon exposure to dilute solutions of Grubbs' catalyst under ambient conditions, the polyurethanes were rapidly depolymerized to low molecular weight, soluble products bearing vinyl and cycloalkene functionalities. These functionalities enabled further re-polymerization by traditional strategies for polymerization of double bonds. This general approach can be expanded to develop a range of chemically recyclable condensation polymers that are readily depolymerized by orthogonal metathesis chemistry.

Jones, Brad Howard↗
DOE OSTI2025

Dual-function lignin monomers enable high-performance graphene electrodes via interface confinement and proton transfer enhancement

Graphene oxide (GO)-based energy storage faces dual bottlenecks: unsustainable reduction methods and sluggish proton transfer kinetics. Here, we introduce a groundbreaking green strategy using lignin-derived vanillyl alcohol (VA) as a dual-function monomer to simultaneously address these challenges. By thermally annealing GO/VA films at mild temperatures (<100 °C), VA triggers an interface-confined reduction of GO while self-polymerizing into redox-active oligomers (P-VA) that intercalate between graphene layers. This dual role-reducing agent and proton highway enables a 3D conductive network with minimized graphene restacking, abundant redox sites, and rapid H + transport pathways. Density Functional Theory (DFT) reveals how P-VA optimizes proton dynamics, while the resulting rGO-P-VA4-T90 electrode achieves a record volumetric capacitance of 311.1F/cm 3 (777.8F/cm 2 ) and retains 87.8 % capacity after 10,000 cycles. Flexible solid-state supercapacitors deliver 94.2 μWh/cm 2 energy density at 63.8 μW/cm 2 , rivaling state-of-the-art devices. Furthermore, this work redefines sustainable graphene engineering, merging biomass valorization with high-performance energy storage in a scalable, eco-friendly paradigm.

Graphene oxide reduction↗
DOE OSTI2014

Piezoelectricity above the Curie temperature? Combining flexoelectricity and functional grading to enable high-temperature electromechanical coupling

Most technologically relevant ferroelectrics typically lose piezoelectricity above the Curie temperature. This limits their use to relatively low temperatures. In this Letter, exploiting a combination of flexoelectricity and simple functional grading, we propose a strategy for high-temperature electromechanical coupling in a standard thin film configuration. We use continuum modeling to quantitatively demonstrate the possibility of achieving apparent piezoelectric materials with large and temperature-stable electromechanical coupling across a wide temperature range that extends significantly above the Curie temperature. With Barium and Strontium Titanate, as example materials, a significant electromechanical coupling that is potentially temperature-stable up to 900 °C is possible.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

From Structure to Functions: Metagenomics-Enabled Predictive Understanding of Soil Microbial Feedbacks to Climate Change

Understanding the responses, adaptations and feedback mechanisms of biological communities to climate change is critical to project future states of earth and climate systems. Although a significant amount of knowledge is available on the feedbacks of aboveground communities to climate change, the responses of belowground microbial communities are still poorly understood. This is due to challenges in analyzing soil microbial communities in terms of their diversity, structure and function. Thus, the ultimate goal of this study is to advance system-level predictive understanding of the feedbacks of belowground microbial communities to multiple climate change factors and their impacts on soil carbon (C) cycling processes. For this, cutting-edge integrated metagenomic technologies are employed to establish mechanistic linkages among aboveground plant communities, belowground microbial communities, ecosystem processes and functions and climate change. Towards this goal, the following four specific objectives are pursued: (i) To determine the responses of microbial community structure, functions and activities to climate warming, altered precipitation, soil moisture regime and/or clipping in the tundra and temperate grassland ecosystems; (ii) To determine the temperature sensitivity and the effect of substrate priming on recalcitrant C decomposition; (iii) To determine microbiological bases underlying temperature sensitivity of recalcitrant C decomposition; and (iv) To develop integrated bioinformatics and modeling approaches to scale information across different organizational levels towards predictive understanding of ecosystem responses to multiple climate change factors in collaboration with the Knowledge Base (KBase) and integrated into their database. Warming experiments in an Alaskan tundra permafrost soil (AK) as well as an Oklahoma temperate grassland soil (OK) provide a more complete picture of the effects of warming on belowground microbial communities of different (key) soil ecosystems. Numerous research activities have been carried out by the institutions under the support of this program. For brevity, a few key results and their significance are highlighted in this report.

54 ENVIRONMENTAL SCIENCES↗