SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The NASA Lewis Research Center's Remote Access Control Room (RACR) uses off-the-shelf video conferencing software integrated with existing facility data systems to provide access to the test data by networking from virtually anywhere in the country. The system allows research engineers in remote locations to participate in tests and monitor data in real time just as if they were present in the control room.
The two-dimensional plasma potential measurements are given of a space-charge dominated double sheath near a hot cathode. Laboratory data show that a virtual cathode is a self-consistent solution only for a transient cathode-plasma system. Slow charge exchange ions get trapped in the potential dip that forms the virtual cathode and eventually destroy it.
The Committee on Earth Observation Satellites (CEOS) is leading the CEOS Analysis Ready Data for Land (CARD4L) initiative. A goal of analysis ready data products is to limit the effort needed by users to pre-process the data allowing them to concentrate on the end products. CARD4L provides a set of specifications that data providers need to meet to be considered to satisfy CARD4L. One of the working groups within CEOS, the Working Group on Calibration and Validation (WGCV) is providing a peer review process to evaluate the documentation of the data providers validation and data product accuracy assessment. The approach makes use of the expertise within WGCV to collaborate with both the CEOS Land Surface Imaging Virtual Constellation and the data providers to work towards acceptance of the...
When the first edition of NASA’s Small Spacecraft Technology State-of-the-art report was published in 2013, 247 CubeSats and 105 other non-CubeSat small spacecraft under 50 kilograms (kg) had been launched, and these represented less than 2% of launched mass into orbit. By 2019, small spacecraft with mass less than 180 kg made up almost 7% of all mass launched into orbit. Additionally, 63% of spacecraft under 600 kg had mass less than 180 kg and of those 47% were CubeSats (1). Since 2013, flight heritage for small spacecraft, primarily CubeSats, has nearly doubled and with dedicated smallsat launch capabilities readily available and expanding, opportunities to demonstrate new technologies and systems are expected to increase. The 2020 edition of this report captures and distills the wealth of new information available on small spacecraft systems from NASA and other publicly available sources. Overall, this report is a survey of small spacecraft technologies sourced from open literature; it does not endeavor to be an original source, and only considers literature in the public domain to identify and classify devices. Commonly used sources for data include manufacturer datasheets, press releases, conference papers, journal papers, public filings with government agencies, news articles, presentations, and Small Spacecraft Systems Virtual Institute Federated Search. Data not appropriate for public dissemination, such as proprietary, export controlled, or otherwise restricted data, are not considered. As a result, this report includes many dedicated hours of desk research performed by subject matter experts reviewing resources noted above.
Climate science is a big data domain that is experiencing unprecedented growth. In our efforts to address the big data challenges of climate science, we are moving toward a notion of Climate Analytics-as-a-Service (CAaaS). CAaaS combines high-performance computing and data-proximal analytics with scalable data management, cloud computing virtualization, the notion of adaptive analytics, and a domain-harmonized API to improve the accessibility and usability of large collections of climate data. MERRA Analytic Services (MERRA/AS) provides an example of CAaaS. MERRA/AS enables MapReduce analytics over NASA's Modern-Era Retrospective Analysis for Research and Applications (MERRA) data collection. The MERRA reanalysis integrates observational data with numerical models to produce a global temporally and spatially consistent synthesis of key climate variables. The effectiveness of MERRA/AS has been demonstrated in several applications. In our experience, CAaaS is providing the agility required to meet our customers' increasing and changing data management and data analysis needs.
Error detection incorporated with automatic-repeat-request (ARQ) is widely used for error control in data communication systems. This method of error control is simple and provides high system reliability. If a properly chosen code is used for error detection, virtually error-free data transmission can be attained. Various types of ARQ and hybrid ARQ schemes, and error detection using linear block codes are surveyed.
The prototype architecture and implementation of a high-speed level zero processing (LZP) system are discussed. Due to the new processing algorithm and VLSI technology, the prototype LZP system features compact size, low cost, high processing throughput, and easy maintainability and increased reliability. Though extensive control functions have been done by hardware, the programmability of processing tasks makes it possible to adapt the system to different data formats and processing requirements. It is noted that the LZP system can handle up to 8 virtual channels and 24 sources with combined data volume of 15 Gbytes per orbit. For greater demands, multiple LZP systems can be configured in parallel, each called a processing channel and assigned a subset of virtual channels. The telemetry data stream will be steered into different processing channels in accordance with their virtual channel IDs. This super system can cope with a virtually unlimited number of virtual channels and sources. In the near future, it is expected that new disk farms with data rate exceeding 150 Mbps will be available from commercial vendors due to the advance in disk drive technology.
Science Data Systems (SDS) comprise an important class of data processing systems that support product generation from remote sensors and in-situ observations. These systems enable research into new science data products, replication of experiments and verification of results. NASA has been building systems for satellite data processing since the first Earth observing satellites launched and is continuing development of systems to support NASA science research and NOAAs Earth observing satellite operations. The basic data processing workflows and scenarios continue to be valid for remote sensor observations research as well as for the complex multi-instrument operational satellite data systems being built today. System functions such as ingest, product generation and distribution need to be configured and performed in a consistent and repeatable way with an emphasis on scalability. This paper will examine the key architectural elements of several NASA satellite data processing systems currently in operation and under development that make them suitable for scaling and reuse. Examples of architectural elements that have become attractive include virtual machine environments, standard data product formats, metadata content and file naming, workflow and job management frameworks, data acquisition, search, and distribution protocols. By highlighting key elements and implementation experience we expect to find architectures that will outlast their original application and be readily adaptable for new applications. Concepts and principles are explored that lead to sound guidance for SDS developers and strategists.
The removal of atmospheric CO2 from a spacecraft is of particular importance to NASA’s mission, and is an area of continual study and technological advancement. One of the more recent advancements has been with reusable sorbents being regenerated with a combination of heat and vacuum. One such technology is the Thermal Amine Scrubber (TAS) flight experiment on the ISS, though several others are currently flying or preparing to fly. A model was created of the TAS to predict chemical performance, using fundamental chemistry and physics based on principles rather than empirical relations. Since the physical laws are true across all conditions, such a model enables greater model accuracy outside the bounds of test data, and allows for virtual testing of the hardware at conditions that are prohibitively difficult or expensive to actually test. This paper details the model’s development, operation, and correlation to data from the flight unit. The model is then compared to a data set taken from the flight unit under different flow, CO2 partial pressure, and bed configuration conditions, resulting in only a 2% error. The equations and principles laid forth in this paper are applicable to a wide range of thermally regenerated sorbents, and additional models of a similar nature would allow for potentially the most straightforward and direct method of comparison of technologies available to date.
The NASA DEVELOP Program conducted 10-week long feasibility projects in a remote work setting, including partnering with The Nature Conservancy’s Washington Chapter and the Puget Sound Clean Air Agency to investigate wildfire smoke from 2000 - 2020 in the Pacific Northwest using satellite-derived data. The team engaged with platforms for collaboration both internally with NASA affiliates and externally with community organizations. Working from multiple states, the team members used a variety of software including Google Meet, Microsoft Teams, and Google Earth Engine to foster communication and work with data in a shared virtual environment. Throughout the project, the team learned that executing the project in a distanced work setting made it easier to reach out to scientists across the country for expertise and guidance. To study changes in air quality resulting from wildfire smoke, the team utilized data from NASA’s Fire Information from Resource Management System (FIRMS) and the ESA’s Sentinel-5 TROPOspheric Monitoring Instrument (TROPOMI). The team created a Google Earth Engine web-based tool, “Plume Hazards and Observations of Emissions by Navigating an Interactive eXplorer” (PHOENIX), to visualize changes in pollutants and aerosol optical depth after fire events. The potential relationship between plume height and fire radiative power was evaluated by using NASA’s Moderate Resolution Imaging Spectroradiometer (MODIS) aboard Aqua and Terra satellites and NASA’s Multi-angle Imaging SpectroRadiometer (MISR) aboard Terra with the MISR INteractive eXplorer (MINX). The PHOENIX smoke assessment tool and science communication infographics will be shared electronically with the partner organizations. Furthermore, the team introduced the partners to MINX and will provide a tailored tutorial that included a recorded video and a written component with a live virtual workshop. These resources build capacity for further research and education on wildfire smoke and air quality within communities.
Explore the source record for details and available documents.
Throughout the last decade, Computer Aided Design was seen as a Great Promise. Much was accomplished, but that pales in comparison with what was promised. Ultimate achievement has always seemed just a step away. During the era of the early turnkey system, the one step was limited by modeling geometry through a wire frame. Besides being cumbersome to deal with in three dimensions, it was continually shown that a wire frame is ambiguous. This made the modeling of geometry for engineering purposes even more frustrating. The fundamentals of computer aided engineering design rest on the ability to do various analyses. Presently, solid modeling is taking the mechanical engineering CAD world by storm. There are no fewer than 20 solid modeling packages around the world, and more appearing with each vendor show. The question of integration, that is, the combination of elements of the CAD process into unified and easily usable design tools still exists.
Communications security for space systems has been a specialized field generally far removed from considerations of mission interoperability and cross-support in fact, these considerations often have been viewed as intrinsically opposed to security objectives. The space communications protocols defined by the Consultative Committee for Space Data Systems (CCSDS) have a twenty-five year history of successful use in over 400 missions. While the CCSDS Telemetry, Telecommand, and Advancing Orbiting Systems protocols for use at OSI Layer 2 are operationally mature, there has been no direct support within these protocols for communications security techniques. Link-layer communications security has been successfully implemented in the past using mission-unique methods, but never before with an objective of facilitating cross-support and interoperability. This paper discusses the design of a standard method for cryptographic authentication, encryption, and replay protection at the data link layer that can be integrated into existing CCSDS protocols without disruption to legacy communications services. Integrating cryptographic operations into existing data structures and processing sequences requires a careful assessment of the potential impediments within spacecraft, ground stations, and operations centers. The objective of this work is to provide a sound method for cryptographic encapsulation of frame data that also facilitates Layer 2 virtual channel switching, such that a mission may procure data transport services as needed without involving third parties in the cryptographic processing, or split independent data streams for separate cryptographic processing.
Linear mixed-effects models provide several benefits over more traditional statistical inference tests that are particularly useful for most human-in-the-loop tracking experiment data. However, surprisingly, mixed models are virtually not used for the analysis of tracking experiment data. This paper uses of linear mixed-effects models to analyze combined tracking data from two previous human-in-the-loop roll tracking experiments that compared control behavior metrics collected in both a research aircraft and a motion-base simulator. In the experiments, pilots' behavior under 10 different motion configurations with varying motion filter gains and break frequencies was evaluated and compared to that in the real aircraft. The linear mixed-effects model analysis on the combined dataset confirmed the main statistical outcomes of the individual experiments. The main benefits of mixed models for this type of data were demonstrated by successfully combining data from two experiments that used different experimental conditions and of which one had an additional apparatus and the other a missing participant. Finally, the mixed-model analysis was able to explicitly test for scientifically relevant statistical differences in the dependent measures between the aircraft and simulator, as well as both experiments.
Systematic software design can be based on the development of a 'hierarchy of virtual machines', each representing a 'level of abstraction' of the design process. The reported investigation presents the concept of 'data space' as a formal model for virtual machines. The presented model of a data space combines the notions of data type and mathematical machine to express the close interaction between data and control structures which takes place in a virtual machine. One of the main objectives of the investigation is to show that control-independent data type implementation is only of limited usefulness as an isolated tool of program development, and that the representation of data is generally dictated by the control context of a virtual machine. As a second objective, a better understanding is to be developed of virtual machine state structures than was heretofore provided by the view of the state space as a Cartesian product.
NASA's LEARN Project is an innovative program that provides long-term immersion in the practice of atmospheric science for middle and high school in-service teachers. Working alongside NASA scientists and using authentic NASA Science Mission Directorate research data, teachers develop individual research topics of interest during two weeks in the summer while on-site at NASA Langley. With continued, intensive mentoring by NASA scientists, the teachers further develop their research throughout the academic year through virtual group meetings and data team meetings mirroring scientific collaborations. At the end of the first year, LEARN teachers present scientific posters. The LEARN experience has had such an impact that multiple teachers from the first two cohorts have elected to continue their research. The LEARN project evaluation has provided insights into particularly effective elements of this new approach. Findings indicate that teachers? perceptions of the scientific enterprise have changed, and that LEARN provided substantial resources to help them take real-world research to their students. This presentation will focus on key factors from LEARN?s implementation that inform best practices for the incorporation of authentic scientific research into teacher professional development experiences. We suggest that these factors should be considered in the development of other such experiences, including: (1) The involvement of a single scientist as both the project leader/manager and the project scientist, to ensure that the project can meet teachers? needs. (2) An emphasis on framing and approaching scientific research questions, so that teachers can learn to evaluate the feasibility of studies based on scope, scale, and availability of data. (3) Long term, ongoing relationships where teachers and scientists work as collaborators, beyond the workshop ?mold.? (4) A focus on meeting the needs of individual teachers, whether their needs relate to elements of research and analysis, or to their tight professional schedules. (5) Above all, flexibility and patience. LEARN builds relationships with teachers slowly, over a long period of time. In the middle, life often intervenes. LEARN has emphasized that teachers? success is more important than deadlines or following a rigid protocol.
The end-to-end performance of a program implementing IEEE Std 802.2 logical link control protocol, which provides virtual circuit and datagram service and which constitutes the top sublayer of the data link layer of the reference model for Local Area Networks is studied. The measurements of relative execution times of various functions required in transferring data, over virtual circuits or as datagrams, showed that most of the program execution time is spent in a few relatively low-level functions. One of these functions performs block movement of data in memory, and two other functions provide access to various queues. Based on this result, two alternative versions of the program which move data efficiently were written and measured. In this paper the results of the study are reported and their impact on designing hardware and software systems for a network interface are discussed.
The U.S. Science Team’s Integrated Multi-satellitE Retrievals for the Global Precipitation Measurement (GPM) mission (IMERG) product provides estimates of surface precipitation rate and related information on a global 0.1° half-hour grid. It is run three times at increasingly longer latency and higher information input to serve different communities. This presentation will briefly summarize the major upgrades included in Version 07. The Goddard Profiling (GPROF) algorithm (applied to passive microwave sensor data from the GPM virtual constellation) and the Combined Radar-Radiometer Algorithm (CORRA) that provide input to IMERG V07 are both improved, and the new Precipitation Estimation from Remotely Sensed Information Using Artificial Neural Networks–Dynamic Infrared Rain Rate (PDIR) algorithm is being applied to infrared data, which employs an additional, warmer infrared temperature threshold than the previous infrared scheme and a deep neural network. V07 has improved bias performance as a result of calibrations that now employ the entire swath widths of CORRA and GPROF GPM Microwave Imager precipitation estimates. As well, time continuity in precipitation features is improved as a result of changes to the Kalman filter that approximately preserve the local histogram of precipitation rates (Scheme for Histogram Adjustment with Ranked Precipitation Estimates in the Neighborhood, or SHARPEN), and that better account for differences in sensor performance. A long-standing bug in the geolocation that shifted grid values 0.1° to the east in the latitude band 70°N-S has been corrected. Other changes in V07 include a hierarchical selection among motion vector sources to address deficiencies in the precipitation propagation near orography, an update to the precipitation phase specification for improved consistency with current inputs, and a renewed effort to implement climatological gauge adjustment to the near-real-time Runs. Early evaluations of V07 IMERG show interesting behavior across the TRMM orbit boost that is highly relevant to the planned orbit boost for the GPM Core observatory.