Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DRYING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Defining a compact dry cooler design to reduce LCOE contribution in a CSP facility

Concentrating solar power (CSP), when coupled with a supercritical carbon dioxide (sCO 2 ) power cycle and sensible heat storage, presents a renewable and clean alternative for utility-scale power generation. However, in order to be competitive in the current and future markets, CSP facilities must limit their levelized cost of electricity (LCOE) by minimizing capital costs and reducing operating costs over the lifetime of the plant. Targeting this goal, this study investigates the LCOE impact of the power cycle pre-cooler. This study considers a compact dry cooler with micro-channel technology on the CO 2 side and formed fin geometry on the air side, using directly-coupled centrifugal fans and a transition duct to improve air distribution across the fins as well as protect the fins from contaminants which may cause blockage, soiling, fouling, and damage. In an effort to better understand the dry cooler impact on LCOE, a sensitivity study was conducted using various combinations of end-to-end approach temperatures, air-side pressure drop values, CO 2 -side pressure drop values, fan types, cooler turndown control schemes, cooler module sizes, and design-point ambient temperatures. Furthemore, off-design cycle performance data was calculated for each dry cooler design using NPSS simulation software; cycle performance data were then input to System Advisor Model (SAM) along with the associated capital costs for LCOE prediction of a 100 MW system over a 30 year plant lifetime. Results of this study show the LCOE is most sensitive to air-side performance, followed by heat transfer effectiveness and capital cost. It was found that a power cycle with a mid- to high-performance dry cooler will produce the most competitive power-production costs. Designing at the extreme ends for approach temperature (or effectiveness), design-point ambient temperature, and compactness (footprint) produce higher LCOE values; mid-range values for these parameters balance performance, operating costs, and associated capital cost to optimize LCOE.

14 SOLAR ENERGY↗
DOE OSTI2024

Experimental analysis of conductive drying of paper and board

The primary heat transfer source in the conventional multi-cylinder drying of paper and board is conduction. Conduction is facilitated by high-tension contact with steam-heated cylinders, while convective drying, the main mass transfer source, operates as heated air flows over the paper web in the pockets. This conduction process occurs at elevated temperatures and contact pressures to ensure effective contact between the wet paper web and the heated cylinders. The contact pressures and temperatures of the hot surface significantly influence the conductive drying characteristics. This research paper presents an experimental study that involves designing a simple lab-scale setup with in-situ and continuous sensing capabilities for various commercially available grades of paper and board. Embedded thermocouples measure the temperatures of the heated platen and the sheet, allowing the collection of flux data to determine heat transfer characteristics. Here, the goal of this study is to ascertain the instantaneous contact coefficients for different basis weights as a function of moisture content. The acquired data will provide valuable insights and information towards process development, design and simulation of the paper drying process.

42 ENGINEERING↗
DOE OSTI2020

Development of Dry Cask Risk Tools

The Nuclear Regulatory Commission (NRC) has repeatedly expressed a desire to increase the use of risk in its decision-making. The Probabilistic Risk Assessment (PRA) Policy Statement published in 1995 formalized the Commission’s commitment to risk-informed regulation through the expanded use of PRA. While a great deal of work has been done to incorporate risk insights into the regulatory framework for at-power nuclear reactors. Far less progress has been made to risk inform the dry-casks and nuclear waste transportation areas of the nuclear fuel cycle. INL was tasked with incorporating the information from the two completed dry cask PRAs as well as any additional available information into a tool that helps the NRC use those insights to identify levels of risk at various stages in the nuclear waste cycle. The first task was to address the License Amendment Request (LAR) Process for Dry Cask storage, the second task is for the incorporate transportation into the tool, and the third and final task will be incorporate any additional regulatory applications for dry cask storage. This report covers the first task of the tool and will eventually incorporate the remaining two tasks may be completed in the future and built off the model described here. Task 1 specifically asked to incorporate the risk insights into the process for determining and prioritizing review of license amendment changes related to storage applications by outlining a resource allocation strategy and defining recommendations of for the depth and breadth of the LAR review. It was requested that the tool be similar in design to the SDP notebooks/worksheets and contain quantitative, qualitative, or semi-quantitative approaches to assessing the risk of the change. The final tool that was selected by INL to be developed was a flowchart and associated rationale document that allows the reviewer to quickly assess potential LAR changes and their associated risks as well as the rationale behind the risk categorization. This risk categorization will lead to specific actionable recommendations to expect from a change of that specific category. This allows for a more consistent review process as well as improving the overall efficiency of the review itself.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2021

Technical Basis for Extended Dry Storage of Aluminum-Clad Spent Nuclear Fuel

This report addresses previously identified technical knowledge and technology gaps and presents the key findings of the multiyear, EMTD-funded research efforts with the goal of evaluating whether ASNF can be safely stored dry for many decades and whether changes to existing ASNF management practices are appropriate. The findings formulate the technical basis for the extended dry storage of ASNF, leading to the main conclusion: All completed work to close the identified knowledge gaps on extended (>50 years) ASNF dry storage supports the conclusion that extended ASNF dry storage is both safe and viable.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Mechanical and durability properties of ultra-high-performance concrete of spent nuclear fuel dry storage systems: a review

Dry storage systems are used for interim storage of spent nuclear fuel (SNF). However, with the growing need to extend the operational periods of these systems, there are concerns about the degradation of their concrete overpacks, which could compromise the system's structural integrity and safety during hazardous events. Traditional concrete mixtures used in SNF dry storage systems have remained largely unchanged since their inception and often use conventional ingredients. These materials are susceptible to degradation mechanisms such as chemical attacks, alkali-silica reactions (ASR), and freeze–thaw cycles, which can lead to a loss of strength and durability over time. To address these challenges, this paper reviews the application of ultra-high-performance concrete (UHPC) as a promising alternative for spent nuclear fuel dry storage system overpacks. UHPC offers superior mechanical properties, exceptional durability, and reduced susceptibility to degradation mechanisms compared to conventional concrete. This paper focuses on the role of supplementary cementitious materials (SCMs) such as silica fume, fly ash, and metakaolin in enhancing UHPC performance for SNF storage applications. These SCMs have been shown to significantly improve the material’s microstructure, strength, and resistance to environmental stressors typically encountered in SNF storage environments. Moreover, incorporating SCMs supports sustainable construction by reducing cement consumption and associated carbon emissions. The review brings together existing research and experimental data, providing insights for engineers and researchers on developing UHPC mixtures that meet the rigorous demands of spent nuclear fuel dry storage systems, extending their service life and minimizing inspection intervals.

36 - MATERIALS SCIENCE↗
DOE OSTI2024

High‐Loading Lithium‐Sulfur Batteries with Solvent‐Free Dry‐Electrode Processing

Abstract Lithium‐sulfur (Li‐S) batteries, with their high energy density, nontoxicity, and the natural abundance of sulfur, hold immense potential as the next‐generation energy storage technology. To maximize the actual energy density of the Li‐S batteries for practical applications, it is crucial to escalate the areal capacity of the sulfur cathode by fabricating an electrode with high sulfur loading. Herein, ultra‐high sulfur loading (up to 12 mg cm −2 ) cathodes are fabricated through an industrially viable and sustainable solvent‐free dry‐processing method that utilizes a polytetrafluoroethylene binder fibrillation. Due to its low porosity cathode architecture formed by the binder fibrillation process, the dry‐processed electrodes exhibit a relatively lower initial capacity compared to the slurry‐processed electrode. However, its mechanical stability is well maintained throughout the cycling without the formation of electrode cracking, demonstrating significantly superior cycling stability. Additionally, through the optimization of the dry‐processing, a single‐layer pouch cell with a loading of 9 mg cm −2 and a novel multi‐layer pouch cell that uses an aluminum mesh as its current collector with a total loading of 14 mg cm −2 are introduced. To address the reduced initial capacity of dry‐processed electrodes, strategies such as incorporating electrocatalysts or employing prelithiated active materials are suggested.

Chemistry↗
DOE OSTI2026

Influence of plateau, slope, and valley on soil hydrology during the dry season in a Central Amazon old‐growth forest

Soil moisture regulates plant water supply and drought sensitivity in tropical forests, yet its vertical and topographic variation remains poorly characterized. We combined high-frequency time-domain reflectometry measurements from 5 to 100 cm across plateau, slope, and valley landforms at the Zona Florestal 2 research site north of Manaus, Central Amazonia, to quantify how soil moisture memory, timing of responses to rainfall, dry-down rates (τ), and soil–water depletion vary across these contrasting landforms. Landform-specific soil moisture calibration curves ensured accurate volumetric water content estimates in these highly weathered soils. During the 2023 dry-to-wet transition (August–November), soil moisture memory showed strong topographic contrasts, with valley profiles increasing from ∼47 h at 5 cm to ∼154 h at 100 cm, while plateaus exhibited higher near-surface persistence (∼124 h at 5 cm) but weaker memory at depth. Dry-down behavior reinforced these differences as valley soils exhibited τ values exceeding ∼200 h, more than double the characteristic τ of plateau soils (∼90 h). Rainfall–soil moisture correlations indicated immediate responses at shallow depths in valleys and progressively longer lags with depth on plateaus and slopes. These hydrologic patterns were mirrored in depletion profiles, which declined sharply below 30 cm on plateaus but remained high and sustained throughout the upper meter in slopes and valleys. Together, these findings provide the first depth-resolved field measurements of soil moisture memory, rainfall coupling, dry-down constants, and depletion dynamics across major upland landforms in Central Amazonia and offer clear observational benchmarks for improving land-surface and ecosystem model representations of soil–water processes.

Hillslope↗
DOE OSTI2021

Simultaneous x-ray and neutron 4D tomographic study of drying-driven hydro-mechanical behavior of cement-based materials at moderate temperatures

The drying of cement-based materials is intimately related to their durability, which has significant economic, social and environmental repercussions. The evolution of the saturation of the pore network and the associated drying shrinkage are in fact leading causes of cracking and of the ensuing penetration of aggressive chemicals. This process is highly heterogeneous, due to the thermo-hydric spatial gradients developing in the material from the exposed surfaces to its core and because of local effects, driven by the intrinsically heterogeneous micro-structure (e.g., by the distribution of pores and aggregates). It follows that macroscopic, sample-scale measurements cannot fully disclose the complexity of the underlying processes. In the last few decades, significant advances in full-field techniques have allowed an unprecedented insight into these local processes. For cement-based materials, x-ray and neutron tomography lend themselves as ideal, and highly complementary, tools for the study of their thermo-hydro-mechanical behavior. Notably, the high sensitivity to density variations of x-ray imaging gives access to the developments of fractures, in 4D (3D + time). On the other hand, neutron tomography allows the study of the evolution of the moisture field in 4D, thanks to its high hydrogen sensitivity. The combination of these two techniques provides a unique insight in thermo-hydro-mechanical couplings, e.g., the effect of cracks on the water content field. This contribution presents novel 5D datasets (3D tomographies along time, plus truly simultaneous x-ray and Neutron rapid acquisitions) in-operando of a cement paste and of a concrete sample heated at moderate temperatures (up to 140{sup ∘}C). The analysis of this 5D data-set (once aligned in time and across modalities) allows for example a quantification of the 4D moisture profiles which were found to predict an overall water loss at hydric equilibrium coherent with the corresponding analytical analysis. In the cement paste sample, the x-ray dataset captures the evolution of an extensive cracking network, opening and propagation toward the core of the sample. A novel analysis procedure is here proposed which allows the extraction of these fractures and the analysis of their interplay with local drying as captured through neutron imaging. This for example reveals the depth of penetration of drying in the vicinity of the fractures along time, which is essential for the assessment and calibration of hydro-mechanical coupled models.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Intra-annual variation in microclimatic conditions in relation to vegetation type and structure in two tropical dry forests undergoing secondary succession

Microclimate acts as a strong filter on species performance in restored and regenerating forests, particularly in seasonally dry tropical forests (SDTF). Yet few studies have measured microclimate patterns across succession in SDTF. Furthermore, although dynamic vegetation models simulate microclimate, evaluation of these simulated variables with field observations has been relatively uncommon. Here, we investigated the seasonal patterns of soil temperature and soil water in naturally regenerated and planted successional vegetation in SDTF in Costa Rica and Puerto Rico, using complementary approaches of intensive field observations and simulation modeling with the Ecosystem Demography model. We found that plots representing later successional stages were wetter on average, but only during the dry season. During the wet season, mean soil water did not differ across vegetation types, but open, early successional vegetation experienced more frequent extreme wet and dry conditions than older forest and plantations. Soil temperature tended to decline with forest structure, and later successional vegetation also experienced less extreme daily temperature fluctuations. Basal area and leaf area index were the best predictors of differences in soil water and temperature across plots. Model simulations were consistent with observations of wet season soil temperature and soil water, but the model failed to reproduce dry season soil moisture dynamics, suggesting that further work is needed to reduce model biases in microclimate variables. Collectively, our results imply that common assumptions about how microclimates influence successional processes in SDTF should be revisited.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Recurrence analysis of friction based dry-couplant ultrasonic Lamb waves in plate-like structures

Here, in this study, the effect of friction on the generation of dry-coupled Lamb waves is experimentally investigated. Recurrence analysis is performed to analyze the complex behavior of friction based dry-coupled Lamb waves. In particular, the effect of the normal force, which is necessary for a stronger dry-coupled Lamb wave generation and the friction, on the transmission of mechanical energy and determinism characteristics of Lamb waves are investigated. The results verify that larger friction coefficient and friction force are crucial for generation and propagation of strong Lamb waves supporting the fact that the main mechanism to transfer mechanical energy using dry-couplant is friction. The sensitivity of Lamb waves to the friction coefficient, highlights the importance of designing specific pads with respect to condition of the surface. Besides, the results show that the normal force and friction coefficient can change the determinism characteristics behavior of multimode Lamb waves. Furthermore, it is shown that the determinism value is sensitive to the friction coefficient and normal force. A similar trend is observed in the determinism values and friction coefficient. In general, a smaller friction coefficient indicates smaller determinism value. Additionally, it is shown that a normal load can change the behavior of a system, as observed from recurrence plots, owing to changes in the Lamb waves trajectories in the phase-space domain. In addition, it is shown that recurrence plots enable the detection of mode transitions in multimode Lamb waves. Recurrence analysis is a complementary tool to frequency domain methods for accurate analysis of multimode Lamb waves behavior.

42 ENGINEERING↗
DOE OSTI2023

Residual Strain and Nanostructural Effects during Drying of Nanocellulose/Clay Nanosheet Hybrids: Synchrotron X-ray Scattering Results

Cellulose nanofibrils (CNF) with 2D silicate nanoplatelet reinforcement readily form multifunctional composites by vacuum-assisted self-assembly from hydrocolloidal mixtures. The final nanostructure is formed during drying. The crystalline nature of CNF and montmorillonite (MTM) made it possible to use synchrotron X-ray scattering (WAXS, SAXS) to monitor structural development during drying from water and from ethanol. Nanostructural changes in the CNF and MTM crystals were investigated. Changes in the out-of-plane orientation of CNF and MTM were determined. Residual drying strains previously predicted from theory were confirmed in both cellulose and MTM platelets due to capillary forces. The formation of tactoid platelet stacks could be followed. We propose that after filtration, the constituent nanoparticles in the swollen, solid gel already have a “fixed” location, although self-assembly and ordering processes take place during drying.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Supply Cost and Life-Cycle Greenhouse Gas Footprint of Dry and Ensiled Biomass Sorghum for Biofuel Production

Here we discuss Biomass sorghum as a promising feedstock for cellulosic biorefineries because of its high yield and drought tolerance. However, the difficulty of effectively drying sorghum in some regions means that it may require different handling than previously studied grassy feedstocks. This study compares the delivered cost and life-cycle greenhouse gas (GHG) footprint of field drying and baling, module storage (wrapped, densely packed biomass), pelletizing, and ensiling. Ensiling has not been widely considered for use in bioenergy production. For farms within 66 km of the biorefinery, ensiled biomass is of the lowest cost and GHG strategy despite additional cost and energy demand for hauling wet biomass. Field drying and baling, if feasible, is the most cost-effective option for sorghum between 66 km and 104 km, beyond which pellets are preferable. A 2000 bone-dry-metric ton (bdt)/day biorefinery can source sorghum with 18 bdt/ha yield cultivated on 5% of surrounding land at costs ranging from $\$$122 (silage) to $\$$167 (pellets)/bdt and a life-cycle GHG footprint of 111 (silage) to 179 kg CO2e/bdt (pellets). With 28 bdt/ha biomass yield, 10% cultivation of surrounding land, and low fertilizer application, costs can range from $\$$66 (silage) to $\$$85 (pellets)/ bdt and GHG footprint of 43 (silage) to 96 kg CO2e (pellets)/bdt.

09 BIOMASS FUELS↗
DOE OSTI2020

Towards Understanding of Cracking during Drying of Thick Aqueous-Processed LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathodes

Replacing N-methyl-2-pyrrolidone (NMP) with water for processing of lithium-ion battery (LIB) electrodes has both cost and environmental benefits, which include reduced drying time, lower dryer capital cost, elimination of NMP recovery capital equipment, and no release of volatile organic compounds (VOCs) into the environment. However, aqueous-processed thick cathodes (≳4 mAh/cm 2 ) typically exhibit detrimental cracking during drying that is not observed for the NMP-based counterpart. The reasons for cracking of these water-based thick electrodes are still not well understood due to the complex nature of the colloidal dispersions used in the LIB electrode processing steps. In this work, the contributions of various factors responsible for cracking are discussed. We show that eliminating hydrogen evolution due to corrosion of the aluminum current collector eliminated the majority of the cracks regardless of the coating thickness, identifying the gas evolution as the primary reason for electrode cracking. Some secondary cracks and pinhole-type defects remained after addressing the aluminum current collector corrosion, which are thought to be caused by an inferior binding network formed by carbon black and binder in aqueous-processed cathodes compared to those processed with NMP. The thick aqueous processed cathodes are not able to sufficiently withstand the drying stresses without crack formation. We demonstrate reduction of these secondary defects by either improving the binding network or by reducing the drying stress. The former was achieved by replacing carbon black with vapor grown graphite tubes (VGGTs) that caused a more efficient utilization of the emulsion binder. Here, the latter was achieved by adding a small amount of IPA as a co-solvent that has been shown to reduce capillary stresses.

25 ENERGY STORAGE↗
DOE OSTI2022

New Evidence for the Importance of Non-Stomatal Pathways in Ozone Deposition During Extreme Heat and Dry Anomalies

Dry deposition could partially explain the observed response in ambient ozone to extreme hot and dry episodes. We examine the response of ozone deposition to heat and dry anomalies using three long-term co-located ecosystem-scale carbon dioxide, water vapor and ozone flux measurement records. We find that, as expected, canopy stomatal conductance generally decreases during days with dry air or soil. However, during hot days, concurrent increases in non-stomatal conductance are inferred at all three sites, which may be related to several temperature-sensitive processes not represented in the current generation of big-leaf models. This may offset the reduction in stomatal conductance, leading to smaller net reduction, or even net increase, in total deposition velocity. We find the response of deposition velocity to soil dryness may be related to its impact on photosynthetic activity, though considerable variability exists. Our findings emphasize the need for better understanding and representation of non-stomatal ozone deposition.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

The Dichotomy of Wet and Dry Trends Over India by Aerosol Indirect Effects in CMIP5 Models

Abstract Aerosol‐cloud interactions, also known as aerosol indirect effect (AIE), substantially impact rainfall frequency and intensity. Here, we analyze NEX‐GDDP, a multimodel ensemble of high‐resolution (0.25°) historical simulations and future projections statistically downscaled from 21 CMIP5 models, to quantify the importance of AIE on extreme climate indices, specifically consecutive dry days (CDD), consecutive wet days (CWD), and simple daily intensity index (SDII). The 21 NEX‐GDDP CMIP5 models are classified into models with reliable (REM) and unreliable (UREM) monsoon climate simulated over India based on their simulations of the climate indices. The REM group is further decomposed based on whether the models represent only the direct (REM ADE ) or the direct and indirect (REM ALL ) aerosol effects. Compared to REM ADE , including all aerosol effects significantly improves the model skills in simulating the observed historical trends of all three climate indices over India. Specifically, AIE enhances dry days and reduces wet days in India in the historical period, consistent with the observed changes. However, by the middle and end of the 21st century, there is a relative decrease in dry days and an increase in wet days and precipitation intensity. Moreover, the REM ALL simulated future CWD and CDD changes are mostly opposite to those in REM ADE , indicating the substantial role of AIE in the future projection of dry and wet climates. These findings underscore the crucial role of AIE in future projections of the Indian hydroclimate and motivate efforts to accurately represent AIE in climate models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Precipitation trends determine future occurrences of compound hot–dry events

Compound hot–dry events—co-occurring hot and dry extremes—frequently cause damages to human and natural systems, often exceeding separate impacts from heatwaves and droughts. Strong increases in the occurrence of these events are projected with warming, but associated uncertainties remain large and poorly understood. Here, using climate model large ensembles, we show that mean precipitation trends exclusively modulate the future occurrence of compound hot–dry events over land. This occurs because local warming will be large enough that future droughts will always coincide with at least moderately hot extremes, even in a 2°C warmer world. By contrast, precipitation trends are often weak and equivocal in sign, depending on the model, region and internal climate variability. Therefore, constraining regional precipitation trends will also constrain future compound hot–dry events. These results help to assess future frequencies of other compound extremes characterized by strongly different trends in the drivers.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Global assessment of the carbon–water tradeoff of dry cooling for thermal power generation

Water scarcity and climate change are dual challenges that could potentially threaten energy security. Yet, integrated water–carbon management frameworks coupling diverse water- and carbon-mitigation technologies at high spatial heterogeneity are largely underdeveloped. Here we build a global unit-level framework to investigate the CO 2 emission and energy penalty due to the deployment of dry cooling—a critical water mitigation strategy—together with alternative water sourcing and carbon capture and storage under climate scenarios. We find that CO 2 emission and energy penalty for dry cooling units are location and climate specific (for example, 1–15% of power output), often demonstrating notably faster efficiency losses than rising temperature, especially under the high climate change scenario. Despite energy and CO 2 penalties associated with alternative water treatment and carbon capture and storage utilization, increasing wastewater and brine water accessibility provide potential alternatives to dry cooling for water scarcity alleviation, whereas CO 2 storage can help to mitigate dry cooling-associated CO 2 emission tradeoffs when alternative water supply is insufficient. By demonstrating an integrative planning framework, our study highlights the importance of integrated power sector planning under interconnected dual water–carbon challenges.

42 ENGINEERING↗
DOE OSTI2025

Simulating evaporative wet and dry cycles in Gale crater, Mars using thermochemical modeling techniques

The aim of this work is to provide a model‐backed hypothesis for the formation of evaporites—sulfates, borates—in Gale crater using thermochemical modeling to determine constraints on their formation. We test the hypothesis that primary evaporites required multiple wet–dry cycles to form, akin to how evaporite assemblages form on Earth. Starting with a basalt‐equilibrated Mars fluid, Mars‐relevant concentrations of B and Li were added, and then equilibrated with Gale lacustrine bedrock. We simulated the cycles of evaporation followed by groundwater recharge/dilution to establish an approximate minimum number of wet–dry cycles required to form primary evaporites. We determine that a minimum of 250 wet–dry cycles may be required to start forming primary evaporites that consist of borates and Ca‐sulfates. We estimate that ~14,250 annual cycles (~25.6 k Earth years) of wet and dry periods may form primary borates and Ca‐sulfates in Gale crater. These primary evaporites could have been remobilized during secondary diagenesis to form the veins that the Curiosity rover observes in Gale crater. No Li salts form after 14,250 cycles modeled for the Gale‐relevant scenario (approximately 10 6 cycles would be needed) which implies Li may be leftover in a groundwater brine after the time of the lake. No major deposits of borates are observed to date in Gale crater which also implies that B may be leftover in the subsequent groundwater brine that formed after evaporites were remobilized into Ca‐sulfate veins.

58 GEOSCIENCES↗