Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DISULFIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Enhanced absorption of monolayer molybdenum disulfide (MoS{sub 2}) using nanostructures with symmetrical cross resonator in the visible ranges

In order to enhance the absorption of monolayer molybdenum disulfide (MoS{sub 2}), a novel nanostructure with symmetrical cross resonator based on MoS{sub 2} in the visible wavelength ranges has been proposed. At a resonant wavelength of 623 nm, the absorption of monolayer MoS{sub 2} in the absorption structure is as high as 82%, much higher than the bare MoS{sub 2} in the air. The electric field around monolayer MoS{sub 2} is enhanced by the guided mode resonance, thereby enhancing the absorption of monolayer MoS{sub 2} in the structure. The relevant parameters of the proposed structure are adjusted to achieve the tunability of the resonant wavelength in the visible ranges and the high-efficiency absorption of monolayer MoS{sub 2} in the structure, which is of great significance for the applications of MoS{sub 2}-based optoelectronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Dynamic mechanical properties, thermal and heat resistance of multiblock co-poly(urethane-imide) films with graphene and tungsten disulfide

Organic-inorganic composites filled with nanoscale graphene and tungsten disulfide particles using thermoelastoplastic multiblock co-poly(urethane-imide)s as polymer matrices were obtained. The matrix polymers were the products of the polycondensation of 1,3-bis-(3′,4-dicarboxyphenoxy)benzene dianhydride, 1,4-bis(aminophenoxy)diphenyl sulfone, and two aliphatic polyesters terminated by 2,4-toluene diisocyanate, namely, polypropylene glycol (M{sub n} = 2300) and poly(ethylene adipate) (M{sub n} = 2700). The weight fraction of aromatic segments in samples of co-poly(urethane-imide)s differed by a factor of two. Obtained composites were investigated by TGA, DSC, and DMA methods.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Friction and Wear Behavior of TiAl Matrix Composites Incorporated with Silver and Molybdenum Disulfide

TiAl matrix composites incorporated with silver (Ag) and molybdenum disulfide (MoS{sub 2}) are investigated to identify the improved friction and wear behavior over a wide temperature range. The results show that the excellent friction-reducing and anti-wear properties are obtained by the incorporation of Ag and MoS{sub 2}, and the composite with 8 wt.% Ag and 4 wt.% MoS{sub 2} exhibits the lowest friction coefficients and wear rates under all testing temperatures. Such phenomenon is attributed to the adaptive-lubricating action of Ag and MoS{sub 2} as the temperature changes. Specifically, Ag and MoS{sub 2} are responsible for the improvements in friction and wear performance within 300 °C; MoS{sub 2}, MoO{sub 3} and Ag{sub 2}MoO{sub 4} are be beneficial to the decrease in friction coefficient and wear rate at 500 °C; Ag{sub 2}MoO{sub 4} plays a supporting role in obtaining favorable frictional capability and good wear resistance at 700 °C.

36 MATERIALS SCIENCE↗

The Tribological Behavior of Hybrid Graphene/Tungsten Disulfide Nanoparticle Coatings

Environmental concerns regarding the disposal of fluid lubricants have led to the application of green technologies to metalworking processes in the form of dry lubricants. These dry lubricants are typically applied as spray coatings that employ the use of nanoparticles. The possible use of graphene in the form of graphene/tungsten disulfide (G/WS{sub 2}) nanoparticle spray coatings has been examined in this research. The investigation was performed through the use of ball-on-disk tests at ambient temperatures to ascertain the possible application of the aerosol spray coatings to the aluminum forming processes. The coatings proved to possess good adhesion to the Al-Mg alloy substrate. The nanoparticle spray coatings were tested at various graphene to WS{sub 2} concentrations and under varying loads. A low steady-state COF was noted for all graphene concentrations during sliding contact under all the loads examined. The durability of the coatings was observed to improve with increasing loads. The low COF was attributed to the formation of wear-induced transfer layers on the steel balls and tribolayers on the coated Al-Mg surfaces. The coating durability was related to the concentration of graphene within the nanoparticle spray coatings and the stability of the tribolayers during sliding contact. The results highlight that the G/WS{sub 2} nanoparticle spray coatings could be considered for aluminum metalworking processes.

36 MATERIALS SCIENCE↗

Protein disulfide isomerase enhances tissue factor-dependent thrombin generation

Protein disulfide isomerase (PDI) plays an important role in fibrin generation in vivo, but the underlying mechanism remains largely unknown. In this study, using thrombin generation assay (TGA), we investigated whether PDI contributes to tissue factor (TF)-mediated thrombin generation. Human peripheral blood mononuclear cells (PBMCs) were treated with 100 ng/ml lipopolysaccharide (LPS), the expression of TF on cell surface was analyzed by flow cytometry. After incubation with an inhibitory anti-TF antibody, recombinant PDI protein or a PDI inhibitor PACMA31, LPS-stimulated human PBMCs were incubated with human plasma, and thrombin generation was assessed by Ceveron Alpha TGA and a fluorescent thrombin substrate. Bone marrow mononuclear cells isolated from PDI-knockout and wild-type mice were stimulated by LPS, followed by measurement of thrombin generation. LPS stimulation increased expression of TF on PBMCs, and thrombin generation. Inhibitory anti-TF antibody almost completely suppressed thrombin generation of LPS-stimulated PBMCs, suggesting that thrombin generation was TF-dependent. Recombinant PDI protein increased thrombin generation, while PACMA31 attenuated thrombin generation. Compared with control cells, PDI-deficient marrow mononuclear cells had less capacity in thrombin generation. Taken together, these data suggest that PDI enhances TF-dependent thrombin generation.

60 APPLIED LIFE SCIENCES↗

Template synthesis and characterization of molybdenum disulfide nanotubules

Graphical abstract: The image is a SEM image of branched MoS{sub 2} nanotubes, which are prepared in AAO templates. It is obvious to observe the branch of MoS{sub 2} nanotubes (labeled by arrows), and it reflects the microcosmic morphologies of pores in templates. Highlights: {yields} Large quantities of hollow MoS2 tubules. {yields} Explanation for the formation of branched shape. {yields} Explanation for the morphology of bamboo-like structure. -- Abstract: Molybdenum disulfide nanotubules were prepared by thermal decomposition of ammonium thiomolybdate ((NH{sub 4}){sub 2}MoS{sub 4}) precursors on anodized aluminum oxide template. Large quantities of hollow MoS{sub 2} nanotubules with the bamboo-like structure were obtained. The morphology and structures of MoS{sub 2} tubules were characterized by scanning electron microscopy, high-resolution transmission electron microscopy, energy dispersive spectroscopy, electron diffraction and optical absorption spectroscopy. MoS{sub 2} nanotubules completely reflected the three-dimensional structure of nanopores in template. The properties of Mo-S chemical bonds in lattice structure and the wetting state between porous surface and precursor have a great effect on the formation of sections in nanotubules, the ridges in the nanopores also play a very special role of this formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid-phase reaction synthesis of mesostructured tungsten disulfide material with a high specific surface area

Highlights: {yields} WS{sub 2} material was synthesized through solid-phase reaction. {yields} (NH{sub 4}){sub 2}WS{sub 4} as precursor and n-octadecylamine as template. {yields} WS{sub 2} material has high specific surface area (145.9 m{sup 2}/g). {yields} The whole preparation process is simple, convenient, green and clean. -- Abstract: A mesostructured tungsten disulfide (WS{sub 2}) material was prepared through a solid-phase reaction utilizing ammonium tetrathiotungstate as the precursor and n-octadecylamine as the template. The as-synthesized WS{sub 2} material was characterized by X-ray powder Diffraction (XRD), Low-temperature N{sub 2} Adsorption (BET method), Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM). The characterization results indicate that the WS{sub 2} material has the typical mesopore structure (3.7 nm) with a high specific surface area (145.9 m{sup 2}/g), and large pore volume (0.18 cm{sup 3}/g). This approach is novel, green and convenient. The plausible mechanism for the formation of the mesostructured WS{sub 2} material is discussed herein.

36 MATERIALS SCIENCE↗

Nanoparticles synthesis of tungsten disulfide via AOT-based microemulsions

Graphical abstract: A controlled synthesis of WS2 nanoparticles (most probably inorganic fullerene (IF)) via microemulsion was applied for the first time to prepare WS2 (7–12 nm) by acidification of the water cores of the AOT reverse microemulsion. Highlights: ► An innovative reverse microemulsion technique was developed for WS{sub 2} synthesis. ► WS{sub 2} nanoparticles were obtained with narrow size distribution in range of 7–12 nm. ► Operating cost of microemulsion was lower in contrast to quartz reactor method. ► WS{sub 2} morphology could be controlled to obtain highly active and selective catalysts. ► Lower size of WS{sub 2} in this study overcomes the shortcoming of quartz reactor method. -- Abstract: The tungsten disulfide (WS{sub 2}) nanoparticles (most probably inorganic fullerene (IF)) with a narrow size distribution were synthesized by a reverse micelle technique for the first time. The particle size was controlled by varying water-to-surfactant molar ratio (W{sub 0}), aging time and reagent concentration. The synthesized WS{sub 2} nanoparticles were characterized by zetasizer, UV–visible spectrophotometers and transmission electron microscopy (TEM). The WS{sub 2} nanoparticles with particle diameter size of 7–12 nm were obtained via 24 h aging time. The particle size was controlled by changing the aging time and molar ratio of water/surfactant. Doubling W{sub 0} increased the amount and particle size of WS{sub 2} by 22 and 26%, respectively. The effect of aging time in the range of 6–24 h was investigated and the complete disappearance of yellowish color at 24 h resulted in an optically clear solution, which was the indication of WS{sub 2} formation with 100% conversion of reactant ((NH{sub 4}){sub 2}WS{sub 4}) in the batch reactor.

36 MATERIALS SCIENCE↗

2D nanocomposite of hexagonal boron nitride nanoflakes and molybdenum disulfide quantum dots applied as the functional layer of all-printed flexible memory device

Highlights: • We have proposed a flexible, rewritable and NVM device based on an advanced 2D nanocomposite. • 2D nanocomposite is synthesized by mixing hBN flakes and MoS{sub 2} QDs. • Entire device was fabricated through extremely simple and highly controllable printing technology. • The RRAM device was tested electrically, mechanically, thermally and chemically. - Abstract: In this study, we have proposed a flexible, rewritable and nonvolatile memory device based on an advanced 2D nanocomposite of hexagonal boron nitride (hBN) flakes and molybdenum disulfide quantum dots (MoS{sub 2} QDs). Complete device fabrication was carried out by using extremely simple and highly controllable all printed technology. The electrical characteristics exhibited by the as developed memory devices included the switching ratio, electrical endurance and retention time of ∼10{sup 3}, 10{sup 3} and 10{sup 4} respectively. The device turned ON and OFF at the SET and RESET threshold voltages of +1.4 V and −1 V respectively. The obtained results of electrical and thermal characterizations exhibited that the switching ratio decreases via either increasing temperature (300 K–380 K) or device size (42 μm–100 μm) hence verifying the formation of conductive filament through the functional layer. Moreover, no major degradation in the switching characteristics was observed even after 1500 bending cycles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electronic and optical properties of ultra-thin 2D tungsten disulfide for photovoltaic applications

Atomically thin 2D layered semiconductor materials such as Transition Metal Di-Chalcogenides (TMDCs) have great potential for use as flexible, ultra-thin photovoltaic materials in solar cells due to their favorable photon absorption and electronic transport properties. The electronic properties, such as band structure and bandgap, and optical absorption properties of Tungsten Disulfide (WS 2 ) were obtained from Density Functional Theory (DFT) calculations; the properties of WS 2 make it a favorable photovoltaic material. Using these properties, we have modelled, using numerical calculations and simulations, a solar cell based on monolayer and bulk WS 2 together with amorphous silicon (a-Si). The maximum efficiency of this cell is 23.26% with V OC of 0.843 V and J SC of 33.49 mA/cm 2 . The performance of our solar cell is comparable to many commercial cells. The results show how monolayer WS 2 can serve as a suitable photovoltaic material, opening possibilities to develop solar cells based on 2D TMDC materials.

36 MATERIALS SCIENCE↗

First-Principles Modeling of Sodium Ion and Water Intercalation into Titanium Disulfide Interlayers for Water Desalination

Recent experiments revealed the possibility of using titanium disulfide (TiS 2 ) as the cathode material in capacitive deionization (CDI) devices for water desalination. Although it performed stably up to 70 cycles with a salt removal capacity of 14 mg/g (corresponding to a sodium ion removal capacity of 35.8 mg/g) at high molar concentration (600 mM NaCl), the maximum capacity of TiS 2 as a CDI electrode was much lower (~70 mAh/g) than as a supercapacitor (239 mAh/g). Understanding why the ion capacities of these two configurations of the same material differ will entail elucidating detailed charge/discharge mechanisms at the atomic scale. Here, we present density functional theory simulations of sodium intercalation into TiS 2 interlayers in order to gain such understanding. We systematically investigated TiS 2 stacking patterns and ion intercalation sites, energetics of the intercalated compounds, and phase transformation during sodium intercalation. The calculated structural evolution and capacitance–voltage curve agree quite well with previous measurements. We conclude that the different maximum capacities of TiS 2 measured in aqueous and dry environments originate from weaker interlayer interactions with respect to shear strain after ~33% intercalation of Na + –H 2 O pairs, which is detrimental to the mechanical stability of TiS 2 . In conclusion, this study sheds light on the underlying mechanisms of ion intercalation into layered materials and contributes to understanding requirements for future design and optimization of CDI electrode materials for water desalination.

36 MATERIALS SCIENCE↗

Highly efficient hydrogen evolution reaction using crystalline layered three-dimensional molybdenum disulfides grown on graphene film.

Electrochemistry is central to applications in the field of energy storage and generation. However, it has advanced far more slowly over the last two decades, mainly because of a lack of suitable and affordable catalysts. Here, we report the synthesis of highly crystalline layered three-dimensional (3D) molybdenum disulfide (MoS2) catalysts with bare Mo-edge atoms and demonstrate their remarkable performance for the hydrogen evolution reaction (HER). We found that Mo-edge-terminated 3D MoS2 directly grown on graphene film exhibits a remarkable exchange current density (18.2 mu A cm(-2)) and turnover frequency (>4 S-1) for HER. The obtained exchange current density is 15.2 and 2.3 times higher than that of MoS2/graphene and MoS2/Au catalysts, respectively, both with sulfided Mo-edge atoms. An easily scalable and robust growth process on a wide variety of substrates, along with prolonged stability, suggests that this material is a promising catalyst in energy-related applications.

Behranginia, Amirhossein↗

Molybdenum Disulfide as a Protection Layer and Catalyst for Gallium Indium Phosphide Solar Water Splitting Photocathodes

Gallium indium phosphide (GaInP2) is a semiconductor with promising optical and electronic properties for solar water splitting, but its surface stability is problematic as it undergoes significant chemical and electrochemical corrosion in aqueous electrolytes. Molybdenum disulfide (MoS2) nanomaterials are promising to both protect GaInP2 and to improve catalysis since MoS2 is resistant to corrosion and also possesses high activity for the hydrogen evolution reaction (HER). In this work, we demonstrate that GaInP2 photocathodes coated with thin MoS2 surface protecting layers exhibit excellent activity and stability for solar hydrogen production, with no loss in performance (photocurrent onset potential, fill factor, and light limited current density) after 60 hours of operation. This represents a five-hundred fold increase in stability compared to bare p-GaInP2 samples tested in identical conditions.

14 SOLAR ENERGY↗

Layer-by-Layer Sorting of Rhenium Disulfide via High-Density Isopycnic Density Gradient Ultracentrifugation

Isopycnic density gradient ultracentrifugation (iDGU) has been widely applied to sort nanomaterials by their physical and electronic structure. Yet, the commonly used density-gradient medium iodixanol has a finite maximum buoyant density that prevents the use of iDGU for high-density nanomaterials. Here, we overcome this limit by adding cesium chloride (CsCl) to iodixanol, thus increasing its maximum buoyant density to the point where the high-density two-dimensional nanomaterial rhenium disulfide (ReS 2 ) can be sorted in a layer-by-layer manner with iDGU. The resulting aqueous ReS 2 dispersions show photoluminescence at ~1.5 eV, which is consistent with its direct bandgap semiconductor electronic structure. Moreover, photocurrent measurements on thin films formed from solution-processed ReS 2 show a spectral response that is consistent with optical absorbance and photoluminescence data. In addition to offering a pathway for effective solution processing of ReS 2 , this work establishes a general methodology for sorting high-density nanomaterials via iDGU.

36 MATERIALS SCIENCE↗

Addressing the Stability Gap in Photoelectrochemistry: Molybdenum Disulfide Protective Catalysts for Tandem III–V Unassisted Solar Water Splitting

While photoelectrochemical (PEC) solar-to-hydrogen efficiencies have greatly improved over the past few decades, advances in PEC durability have lagged behind. Corrosion of semiconductor photoabsorbers in the aqueous conditions needed for water splitting is a major challenge that limits device stability. In addition, a precious-metal catalyst is often required to efficiently promote water splitting. In this work, we demonstrate unassisted water splitting using a nonprecious metal molybdenum disulfide nanomaterial catalytic protection layer paired with a GaInAsP/GaAs tandem device. This device was able to achieve stable unassisted water splitting for nearly 12 h, while a sibling sample with a PtRu catalyst was only stable for 2 h, highlighting the advantage of the nonprecious metal catalyst. In situ optical imaging illustrates the progression of macroscopic degradation that causes device failure. Furthermore, this work compares unassisted water splitting devices across the field in terms of the efficiency and stability, illustrating the need for improved stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cathode based on molybdenum disulfide nanoflakes for lithium-oxygen batteries.

Lithium-oxygen (Li-O-2) batteries have been recognized as an emerging technology for energy storage systems owing to their high theoretical specific energy. One challenge is to find an electrolyte/cathode system that is efficient, stable, and cost-effective. We present such a system based on molybdenum disulfide (MoS2) nanoflakes combined with an ionic liquid (IL) that work together as an effective cocatalyst for discharge and charge in a Li-O-2 battery. Cyclic voltammetry results show superior catalytic performance for this cocatalyst for both oxygen reduction and evolution reactions compared to Au and Pt catalysts. It also performs remarkably well in the Li-O-2 battery system with 85% round-trip efficiency and reversibility up to 50 cycles. Density functional calculations provide a mechanistic understanding of the MoS2 nanoflakes/IL system. cocatalyst reported in this work could open the way for exploiting the unique properties of ionic liquids in Li-air batteries in combination with nanostructured MoS2 as a cathode material.

Asadi, Mohammad↗

Carbene Functionalization of Monolayer Tungsten Disulfide for Enhanced Quantum Emission

Semiconducting two-dimensional (2D) transition metal dichalcogenides (TMDs) are promising materials for an array of applications, ranging from conventional field-effect transistors, photodetectors, and light-emitting diodes to their more recent use in quantum photonic technologies. Chemical functionalization of 2D TMDs with organic ligands and adlayers provides an additional means for customizing their electronic and optical properties. While many pathways have been reported for the chemical functionalization of 2D TMDs, their frequent reliance on solution-based methods results in limited control over adlayer thickness and coverage, thus hindering utility in high-performance applications. Here, in this study, we describe the vapor-phase functionalization of a 2D TMD with carbene ligands, specifically tungsten disulfide (WS 2 ) with N-heterocyclic carbenes (NHCs), resulting in molecularly smooth, thin, and uniform adlayers. Reacting NHCs with monolayer WS 2 reduces the broad photoluminescence background observed at cryogenic temperatures by 58%, which facilitates the detection of single-photon emitters from strained monolayer WS 2 , as indicated by second order correlation values ( g (2) ) as low as 0.17 ± 0.07. Chemical characterization coupled with density functional theory calculations suggests that the NHC adlayer has a dual defect-passivation and doping effect on monolayer WS 2 that results in enhanced single-photon emission. Overall, this study establishes vapor-phase carbene functionalization as a homogeneous surface modification scheme for tailoring the quantum emission properties of semiconducting 2D TMDs.

N-heterocyclic carbenes↗

Nonradiative Energy Transfer from Individual CdSe/ZnS Quantum Dots to Single-Layer and Few-Layer Tin Disulfide

We study the combination of zero-dimensional (0D) colloidal CdSe/ZnS quantum dots with tin disulfide (SnS 2 ), a two-dimensional (2D)-layered metal dichalcogenide, results in 0D–2D hybrids with enhanced light absorption properties. These 0D–2D hybrids, when exposed to light, exhibit intrahybrid nonradiative energy transfer from photoexcited CdSe/ZnS quantum dots to SnS 2 . Using single nanocrystal spectroscopy, we find that the rate for energy transfer in 0D–2D hybrids increases with added number of SnS 2 layers, a positive manifestation toward the potential functionality of such 2D-based hybrids in applications such as photovoltaics and photon sensing.

36 MATERIALS SCIENCE↗