SEARCH · Engineering Papers

Results for “DIPS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

DOE OSTI2021

WIYN Open Cluster Study. LXXXV. Li in NGC 2243: Implications for Stellar and Galactic Evolution

High-dispersion spectra in the Li λ6708 region have been obtained and analyzed in the old, metal-deficient cluster NGC 2243. From Hydra spectra for 29 astrometric and radial velocity members, we derive rotational velocities, as well as [Fe/H], [Ca/H], [Si/H], and [Ni/H] based on 17, 1, 1, and 3 lines, respectively. Using ROBOSPECT, an automatic equivalent width measurement program, we derive [Fe/H] = −0.54 ± 0.11 (MAD), for an internal precision for the cluster [Fe/H] below 0.03 dex. Given the more restricted line set, comparable values for [Ca/H], [Si/H], and [Ni/H] are −0.48 ± 0.19, −0.44 ± 0.11, and −0.61 ± 0.06, respectively. With E(B − V) = 0.055, appropriate isochrones imply (m − M) = 13.2 ± 0.1 and an age of 3.6 ± 0.2 Gyr. Using available VLT spectra and published Li abundances, we construct an Li sample of over 100 stars extending from the tip of the giant branch to 0.5 mag below the Li dip. The Li dip is well populated and, when combined with results for NGC 6819 and Hyades/Praesepe, implies a mass/metallicity slope of 0.4 M {sub ⊙}/dex for the high-mass edge of the Li dip. The A(Li) distribution among giants reflects the degree of Li variation among the turnoff stars above the Li dip, itself a function of stellar mass and metallicity and strongly anticorrelated with a v {sub rot} distribution that dramatically narrows with age. Potential implications of these patterns for the interpretation of Li among dwarf and giant field populations, especially selection biases tied to age and metallicity, are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRS1979

The double seismic zone in downgoing slabs and the viscosity of the mesosphere

The seismic zone beneath several island arcs between about 100 and 200 km depth consists of an upper zone having down-dip compression and a lower zone having down-dip tension. Several numerical models of the Aleutian arc were computed to test the hypothesis that these double seismic zones are due to sagging of the slab under its own weight. This sagging occurs because the asthenosphere (between about 100 and 200 km) provides little support or resistance to the slab, which is supported from below by the more viscous mesosphere and from above by the lithosphere. The viscosity of the mesosphere was constrained to the interval between 0.25 x 10 to the 22nd and 0.5 x 10 to the 22nd P by noting that the slab would have mainly down-dip compression at higher viscosities and mainly down-dip tension at lower viscosities. The deviatoric stress in the slab and the fault plane between the slab and the island arc is about 200-300 bars (expressed as shear stress). The models were calibrated to the observed depth and gravity anomalies in the trench.

Sleep, N. H.↗

NASA NTRS1986

Some examples of deep structure of the Archean from geophysics

The development of Archean crust remains as one of the significant problems in earth science, and a major unknown concerning Archean terrains is the nature of the deep crust. The character of crust beneath granulite terrains is especially fascinating because granulites are generally interpreted to represent a deep crustal section. Magnetic data from this area can be best modeled with a magnetized wedge of older Archean rocks (granulitic gneisses) underlying the younger Archean greenstone terrain. The dip of the boundary based on magnetic modeling is the same as the dip of the postulated thrust-fault reflection. Thus several lines of evidence indicate that the younger Archean greenstone belt terrain is thrust above the ancient Minnesota Valley gneiss terrain, presumably as the greenstone belt was accreted to the gneiss terrain, so that the dipping reflection represents a suture zone. Seismic data from underneath the granulite-facies Minnesota gneiss terrain shows abundant reflections between 3 and 6 s, or about 9 to 20 km. These are arcuate or dipping multicyclic events indicative of layering.

Smithson, S. B.↗

NASA NTRS1986

The 7 and 25 June 1985 Neptune occultations - Constraints on the putative Neptune 'arc'

Data were obtained on stellar occultations by Neptune on June 7 and 25, 1985 in an attempt to validate previous data which supported the presence of a ring-like 'arc' near the planet. The data were taken with an IR photometer at the South African Astronomical Observatory using continuous measurements at 2.2 microns. One dip was observed in the light curve of an occulted binary star. The dip was similar to a previously observed dip and, because no dip was seen for the companion star, indicated a discontinuous structure. Two estimates, around 62,600 and 63,760 km, are made for the equatorial radius of the potential arc structure, which may be discontinuous on a scale of a few thousand kilometers.

Covault, C. E.↗

NASA NTRS1988

Tool For Tinning Integrated-Circuit Leads

As many as eight flatpacks held. Tool made of fiberglass boards. Clamps row of flatpacks by their leads so leads on opposite side of packages dipped. After dipping, nuts on boards loosened, flatpacks turned around, nuts retightened, and untinned leads dipped. Strips of magnetic material grip leads of flatpacks (made of Kovar, magnetic iron/nickel/cobalt alloy) while boards repositioned. Micrometerlike screw used to adjust exposed width of magnetic strip to suit dimensions of flatpacks. Holds flatpack integrated circuits so leads tinned. Accommodates several flatpacks for simultaneous dipping of leads in molten solder. Adjusts to accept flatpacks in range of sizes.

Prosser, Gregory N.↗

NASA NTRS1988

Mach number effects on transonic aeroelastic forces and flutter characteristics

Transonic aeroelastic stability analysis and flutter calculations are presented for a generic transport-type wing based on the use of the CAP-TSD (Computational Aeroelasticity Program - Transonic Small Disturbance) finite-difference code. The CAP-TSD code was recently developed for transonic unsteady aerodynamic and aeroelastic analysis of complete aircraft configurations. A binary aeroelastic system consisting of simple bending and torsion modes was used to study aeroelastic behavior at transonic speeds. Generalized aerodynamic forces are presented for a wide range of Mach number and reduced frequency. Aeroelastic characteristics are presented for variations in freestream Mach number, mass ratio, and bending-torsion frequency ratio. Flutter boundaries are presented which have two transonic dips in flutter speed. The first dip is the usual transonic dip involving a bending-dominated flutter mode. The second dip is characterized by a single degree-of-freedom torsion oscillation. These aeroelastic results are physically interpreted and shown to be related to the steady state shock location and changes in generalized aerodynamic forces due to freestream Mach number.

Mohr, Ross W.↗

NASA NTRS1988

Mach number effects on transonic aeroelastic forces and flutter characteristics

Mohr, Ross W.↗

NASA NTRS1992

Design of small Stirling dynamic isotope power system for robotic space missions

Design of a multihundred-watt Dynamic Isotope Power System (DIPS) based on the U.S. Department of Energy (DOE) General Purpose Heat Source (GPHS) and small (multihundred-watt) free-piston Stirling engine (FPSE) technology is being pursued as a potential lower cost alternative to radioisotope thermoelectric generators (RTG's). The design is targeted at the power needs of future unmanned deep space and planetary surface exploration missions ranging from scientific probes to Space Exploration Initiative precursor missions. Power level for these missions is less than a kilowatt. Unlike previous DIPS designs which were based on turbomachinery conversion (e.g. Brayton), this small Stirling DIPS can be advantageously scaled down to multihundred-watt unit size while preserving size and mass competitiveness with RTG's. Preliminary characterization of units in the output power ranges 200-600 We indicate that on an electrical watt basis the GPHS/small Stirling DIPS will be roughly equivalent to an advanced RTG in size and mass but require less than a third of the isotope inventory.

Bents, D. J.↗

NASA NTRS2000

Multiwaveband Monitoring of the Radio Galaxy 3C 120

This project started new weekly observations of the radio galaxy 3C 120 during Cycle 3 (1998) of the RXTE mission. It is clear that the weekly observations in 1998 did not resolve the variations of the X-ray emission. The most prominent features are three dips in the X-ray flux, separated from each other by about one year. The dips (as well as the the general flux level) is not correlated with the radio emission. However, the times of the dips coincided, within the errors, with the times of zero separation between apparently superluminal features in the radio jets and the cores of the jets. This is potentially a very exciting finding, which would, if confirmed, link the physics of this radio galaxy with that of the binary star system in our Galaxy, 1915+105. The X-ray dip would then be interpreted as the dissociation of the inner accretion disk, with the extra accretion onto the black hole being accompanied by enhanced flow of energy and material down the relativistic jet. This would result in the creation of the observed new superluminal knot.

Marscher, Alan P.↗

NASA NTRS2002

The 1999 Hector Mine Earthquake, Southern California: Vector Near-Field Displacements from ERS InSAR

Two components of fault slip are uniquely determined from two line-of-sight (LOS) radar interferograms by assuming that the fault-normal component of displacement is zero. We use this approach with ascending and descending interferograms from the ERS satellites to estimate surface slip along the Hector Mine earthquake rupture. The LOS displacement is determined by visually counting fringes to within 1 km of the outboard ruptures. These LOS estimates and uncertainties are then transformed into strike- and dip-slip estimates and uncertainties; the transformation is singular for a N-S oriented fault and optimal for an E-W oriented fault. In contrast to our previous strike-slip estimates, which were based only on a descending interferogram, we now find good agreement with the geological measurements, except at the ends of the rupture. The ascending interferogram reveals significant west-sidedown dip-slip (approximately 1.0 m) which reduces the strike-slip estimates by 1 to 2 m, especially along the northern half of the rupture. A spike in the strike-slip displacement of 6 m is observed in central part of the rupture. This large offset is confirmed by subpixel cross correlation of features in the before and after amplitude images. In addition to strike slip and dip slip, we identify uplift and subsidence along the fault, related to the restraining and releasing bends in the fault trace, respectively. Our main conclusion is that at least two look directions are required for accurate estimates of surface slip even along a pure strike-slip fault. Models and results based only on a single look direction could have major errors. Our new estimates of strike slip and dip slip along the rupture provide a boundary condition for dislocation modeling. A simple model, which has uniform slip to a depth of 12 km, shows good agreement with the observed ascending and descending interferograms.

Sandwell, David T.↗

NASA NTRS2008

Joint XMM-Newton, Chandra, and RXTE Observations of Cyg X-1 at Phase Zero

We present first results of simultaneous observations of the high mass X-ray binary Cyg X-1 for 50 ks with XMM-Newton, Chandra-HETGS and RXTE in 2008 April. The observations are centered on phase 0 of the 5.6 d orbit when pronounced dips in the X-ray emission from the black hole are known to occur. The dips are due to highly variable absorption in the accretion stream from the O-star companion to the black hole. Compared to previous high resolution spectroscopy studies of the dip and non-dip emission with Chandra, the addition of XMM-Newton data allows for a better determination of the continuum, especially through the broad iron line region (with RXTE constraining the greater than 10 keV continuum).

Pottschmidt, Katja↗

NASA NTRS2016

Discovery of Rapidly Moving Partial X-Ray Absorbers Within Cassiopeiae

Gamma Cassiopeiae is an enigmatic Be star with unusually strong hard X-ray emission. The Suzaku observatory detected six rapid X-ray spectral hardening events called "softness dips" in a approx.100 ks observation in 2011. All the softness dip events show symmetric softness-ratio variations, and some of them have flat bottoms apparently due to saturation. The softness dip spectra are best described by either approx.40% or approx.70% partial covering absorption to kT approx.12 keV plasma emission by matter with a neutral hydrogen column density of approx.(2−8) ×10(exp 21)/sq cm, while the spectrum outside these dips is almost free of absorption. This result suggests the presence of two distinct X-ray-emitting spots in the gamma Cas system, perhaps on a white dwarf (WD) companion with dipole mass accretion. The partial covering absorbers may be blobs in the Be stellar wind, the Be disk, or rotating around the WD companion. Weak correlations of the softness ratios to the hard X-ray flux suggest the presence of stable plasmas at kT approx 0.9 and 5 keV, which may originate from the Be or WD winds. The formation of a Be star and WD binary system requires mass transfer between two stars; gamma Cas may have experienced such activity in the past.

tars: emission-line↗

NASA NTRSDate not supplied

ATM-X Digital Information Platform

High level introduction of Digital Information Platform (DIP) objectives as a sub-project under Airspace Traffic Management - Exploration (ATM-X). Important information is emerging in digital form and additional effort is required to utilize this information. DIP will provide the capability to integrate key flight information from multiple sources. DIP is currently in planning phase will take a community-involved, collaborative approach to define and develop the framework. DIP is seeking community and stakeholder input to operational needs, metrics of interest and demonstration contribution

Digital Information Platform↗

NASA NTRS2022

Extension and Validation of the Pendulum Model for Longitudinal Solar Prominence Oscillations

Context. Longitudinal oscillations in prominences are common phenomena on the Sun. These oscillations can be used to infer the geometry and intensity of the filament magnetic field. Previous theoretical studies of longitudinal oscillations made two simplifying assumptions: uniform gravity and semicircular dips on the supporting flux tubes. However, the gravity is not uniform and realistic dips are not semicircular. Aims. Our aim is to understand the effects of including the nonuniform solar gravity on longitudinal oscillations and explore the validity of the pendulum model with different flux-tube geometries. Methods. We first derived the equation describing the motion of the plasma along the flux tube including the effects of nonuniform gravity, yielding corrections to the original pendulum model. We also computed the full numerical solutions for the normal modes and compared them with the new pendulum approximation. Results. We find that the nonuniform gravity introduces a significant modification in the pendulum model. We also found a cut-off period; i.e., the longitudinal oscillations cannot have a period longer than 167 min. In addition, considering different tube geometries, the period depends almost exclusively on the radius of curvature at the bottom of the dip. Conclusions. We conclude that nonuniform gravity significantly modifies the pendulum model. These corrections are important for prominence seismology, because the inferred values of the radius of curvature and minimum magnetic-field strength differ substantially from those of the old model. However, we find that the corrected pendulum model is quite robust and is still valid for noncircular dips.

Sun: corona↗

DOE OSTI2025

High-resolution spectroscopy of uranium laser-produced plasma using saturated absorption spectroscopy

High-resolution spectroscopy of laser ablation plumes or laser-produced plasmas (LPPs) is valuable for various applications, including measuring crowded spectral features, determining spectroscopic constants, characterizing plasmas, and performing isotopic analysis. However, various line broadening mechanisms in plasmas limit its use for several applications. Here, in this study, we present the use of saturated absorption spectroscopy (SAS) for Doppler-free linewidth analysis in a uranium LPP. We demonstrate that SAS is effective in obtaining Doppler-free Lamb dip profiles with linewidths on the order of ≤ 20 MHz. The effects of saturation on the Doppler-broadened absorption and Lamb dip profiles at different pressures and probe intensities are quantified, and their impact on measurements of plasma properties is discussed. Finally, we show that the linewidths of the Lamb dips can be used for quantitative estimates of pressure and natural broadening in the plasma.

Absorption spectroscopy↗

DOE OSTI2025

Performance of a dynamic single bubbler in single and two-phase immiscible liquids

Ensuring nonproliferation and safeguards of special nuclear materials (SNM) is a critical aspect of advancing the nuclear fuel cycle. Traditional bubbler systems used to estimate liquid levels and densities in nuclear recycling processes have limitations, particularly in harsh environments where dip-tube corrosion and buildup necessitate frequent maintenance and recalibration. This study explores the Dynamic Single Bubbler (DSB) method, which utilizes a single dip-tube attached to a linear actuator to estimate liquid properties dynamically. This approach is extended to estimate liquid-liquid interfaces in immiscible liquids and employs a linear regression method to reduce uncertainties and improve accuracy. The DSB method achieved density estimate uncertainties of less than 0.5% and surface level estimate uncertainties typically under 0.5%, across various fluids including water, acetone, methanol, mineral oil, glycerol, and aqueous salt solutions. Results indicate that the DSB method provides accurate and robust estimates of liquid density and surface levels with minimal maintenance and without the need for calibration. Additionally, the method's applicability to immiscible liquids and various dip-tube geometries was demonstrated, showing promise for widespread use in nuclear and other industrial applications.

98 - NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL↗

DOE OSTI2024

Electronic excitations and spin interactions in chromium trihalides from embedded many-body wavefunctions

Although chromium trihalides are widely regarded as a promising class of two-dimensional magnets for next-generation devices, an accurate description of their electronic structure and magnetic interactions has proven challenging to achieve. Here, we quantify electronic excitations and spin interactions in CrX 3 (X = Cl, Br, I) using embedded many-body wavefunction calculations and fully generalized spin Hamiltonians. We find that the three trihalides feature comparable d-shell excitations, consisting of a high-spin 4 A 2 ($t^3_{2g}$$e^0_g$) ground state lying 1.5–1.7 eV below the first excited state 4 T 2 ($t^2_{2g}$$e^1_g$). CrCl 3 exhibits a single-ion anisotropy A sia = - 0.02 meV, while the Cr spin-3/2 moments are ferromagnetically coupled through bilinear and biquadratic exchange interactions of J 1 = - 0.97 meV and J 2 = - 0.05 meV, respectively. The corresponding values for CrBr 3 and CrI 3 increase to A sia = -0.08 meV and A sia = - 0.12 meV for the single-ion anisotropy, J 1 = -1.21 meV, J 2 = -0.05 meV and J 1 = -1.38 meV, J 2 = -0.06 meV for the exchange couplings, respectively. We find that the overall magnetic anisotropy is defined by the interplay between A sia and A dip due to magnetic dipole–dipole interaction that favors in-plane orientation of magnetic moments in ferromagnetic monolayers and bulk layered magnets. The competition between the two contributions sets CrCl 3 and CrI 3 as the easy-plane (A sia + A dip >0) and easy-axis (A sia + A dip <0) ferromagnets, respectively. The differences between the magnets trace back to the atomic radii of the halogen ligands and the magnitude of spin–orbit coupling. Our findings are in excellent agreement with recent experiments, thus providing reference values for the fundamental interactions in chromium trihalides.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Measuring characteristic differences between high- and low-performing discharges on the MegaJOuLe Neutron Imaging Radiography (MJOLNIR) DPF

A dense plasma focus (DPF) is a compact coaxial plasma gun, which completes its discharge as a Z-pinch, producing short (<100 ns) pulses of ions, x rays, and/or neutrons. Lawrence Livermore National Laboratory recently constructed and began operating a new device, the MJOLNIR (MegaJOuLe Neutron Imaging Radiography) DPF, which is designed for single-pulse flash neutron radiography. This device has achieved neutron yields of up to 4.1×10 11 neutrons/pulse at 3.3 MA peak current, and higher-current commissioning is under way. Like most DPFs, MJOLNIR exhibits variable yields in some configurations. Here, we present evidence of the role of parasitic current paths within the gun in stochastically influencing the yield. First through “conditioning shots,” where new hardware has been introduced, we show that increased run-down and run-in speeds correlate with higher yields. These observations are consistent with current being delivered to the electrodes but not to the main plasma sheath, degrading the implosion-driving force. Once nominal conditions are established, we correlate low-performing discharges with smaller current dip and associated voltage spike for a fixed machine configuration. A snow-plow model is able to recreate small-magnitude current dips through the introduction of a parasitic current path, and particle-in-cell simulations establish how parasitic current paths lower the ion beam energy available to produce neutrons. Finally, we observe an increased likelihood of shots with low yield and smaller current dip with increasing fill pressure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗