Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DIGESTIBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Gill bacteria enable a novel digestive strategy in a wood-feeding mollusk

In animals, gut microbes are essential for digestion. Here in this paper, we show that bacteria outside the gut can also play a critical role in digestion. In shipworms, wood-eating marine bivalves, endosymbiotic bacteria are found within specialized cells in the gills. We show that these endosymbionts produce wood-degrading enzymes that are selectively transported to the shipworm’s bacteria-free gut, where wood digestion occurs. Because only selected wood-degrading enzymes are transported, the shipworm system naturally identifies those endosymbiont enzymes most relevant to lignocellulose deconstruction without interference from other microbial proteins. Furthermore, this work expands the known biological repertoire of bacterial endosymbionts to include digestion of food and identifies previously undescribed enzymes and enzyme combinations of potential value to biomass-based industries, such as cellulosic biofuel production.

59 BASIC BIOLOGICAL SCIENCES↗

Analytical Study to Use the Excess Digester Gas of Wastewater Treatment Plants

This study presents an analytical method that can be used to enhance the power production rate and the energy-saving at wastewater treatment plants. The digester used at wastewater treatment plants produces digester gas by anaerobic digestion, with which biofuel production can be achieved. Biofuels can be used to meet some of the energy requirements of the wastewater treatment facility through combined heat and power (CHP) gas engines (cogeneration). Using micro gas turbine (MGT), a CHP technology can be introduced in wastewater treatment plants (WWTPs). The combination of MGTs and absorption chillers is a promising technology as it produces electricity, heating, and cooling simultaneously. The study demonstrated how the waste heat of MGTs could be used to drive absorption chillers. In this analytical study, a detailed technical and economic analysis is provided on the trigeneration system, i.e., the integration of MGTs and absorption chillers driven by waste digester gas of the wastewater treatment plants. It can meet the heating and cooling demands of the plants, which promote the reduction of utility costs. The technology presented is also useful for other thermal energy users.

09 BIOMASS FUELS↗

Synthesis of CdSe/ZnS and CdTe/ZnS Quantum Dots: Refined Digestive Ripening

We report synthesis of CdSe and CdTe quantum dots (QDs) from the bulk CdSe and CdTe material by evaporation/co‐condensation using the solvated metal atom dispersion (SMAD) technique and refined digestive ripening. The outcomes of this new process are (1) the reduction of digestive ripening time by employing ligands (trioctylphosphine oxide (TOPO) and oleylamine (OA)) as capping agent as well as digestive ripening solvent, (2) ability to tune the photoluminescence (PL) from 410 nm to 670 nm, (3) demonstrate the ability of SMAD synthesis technique for other semiconductors (CdTe), (4) direct comparison of CdSe QDs growth with CdTe QDs growth based on digestive ripening times, and (5) enhanced PL quantum yield (QY) of CdSe QDs and CdTe QDs upon covering with a ZnS shell. Further, the merit of this synthesis is the use of bulk CdSe and CdTe as the starting materials, which avoids usage of toxic organometallic compounds, eliminates the hot injection procedure, and size selective precipitation processes. It also allows the possibility of scale up. These QDs were characterized by UV‐vis, photoluminescence (PL), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM), X‐ray photoelectron spectroscopy (XPS), and powder XRD.

Cingarapu, Sreeram↗

The Prognostic Value of a Pathologic Complete Response After Neoadjuvant Therapy for Digestive Cancer: Systematic Review and Meta-Analysis of 21 Studies

Background: Neoadjuvant therapy (NAT) before radical excision has become the preferred initial option for locally advanced digestive cancers such as esophageal cancer (EC), esophagogastric junction adenocarcinoma (EGJAC), gastric adenocarcinoma (GAC), rectal cancer (RC), and pancreatic cancer (PC). Although some patients reportedly achieve a pathologic complete response (pCR) after neoadjuvant therapy, the published data are inconsistent regarding whether pCR yields a survival benefit. The current meta-analysis was performed to assess the potential prognostic value of pCR after preoperative therapy for patients with digestive cancers. Methods: An extensive electronic search in PubMed, Web of Science, and the Cochrane Library was performed for relevant articles, from which data relative to independent correlations of pCR with overall survival (OS) and disease-free survival (DFS) were extracted for analysis. A random-effects model was used to calculate the pooled hazard ratios (HRs) with their corresponding 95% confidence intervals (CIs). Results: The study identified 6780 patients who met the inclusion and exclusion criteria. The results showed that pCR was significantly correlated with better OS (HR, 0.50; 95% CI, 0.43–0.58; P < 0.001) and DFS (HR, 0.49; 95% CI, 0.40–0.60; P < 0.001) for the digestive cancer patients who achieved pCR than for those who did not achieve pCR. Subgroup analysis showed that the correlation of pCR with OS was significant in EC (HR, 0.57; 95% CI, 0.47–0.69; P < 0.001), EGJAC/GAC (HR, 0.38; 95% CI, 0.17–0.86; P = 0.02), RC (HR, 0.48; 95% CI, 0.28–0.81; P = 0.006), and PC (HR, 0.41; 95% CI, 0.17–0.97; P = 0.04). In addition, the survival benefit for pCR patients was of similar magnitude, irrespective of the type of study, type of NAT, or ethnicity. Conclusions: A pCR is correlated with favorable survival outcomes compared with a non-pCR for digestive cancer patients after NAT.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

University of Wisconsin Oshkosh Anaerobic Dry Digestion Facility

The University of Wisconsin Oshkosh Anaerobic Dry Digestion Facility is a demonstration project that supported the first commercial-scale use in the United States of high solids, static pile technology for anaerobic digestion of organic waste to generate biogas for use in generating electricity and heat. The research adds to the understanding of startup, operation and supply chain issues for anaerobic digester technology. Issues and performance were documented for equipment installation and modifications, feedstock availability and quality, weekly loading and unloading of digestion chambers, chemical composition of biogas produced, and energy production. This facility also demonstrated an urban industrial ecology approach to siting such facilities near sewage treatment plants (to capture and use excess biogas generated by the plants) and organic yard waste collection sites (a source of feedstock).

09 BIOMASS FUELS↗

How does pelleting alter the enzymatic digestibility of corn stover?

Pelleting of lignocellulosic biomass facilitates its transportation, storage and handling and offers opportunities to improve the enzymatic digestibility of pelleted biomass. Here, we report the impact of pelleting on the enzymatic digestibility of corn stover prior to pretreatment and associated substrate characteristics. Pelleting almost doubles the digestibility of unpretreated corn stover, from 8.2 to 15.5% glucan conversion, at 5% solid loading using 1 FPU Cellic CTec2 per g solids. Compositional analysis indicates that loose and pelleted corn stover have similar non-dissolvable compositions, although their extractives are slightly different. Enzymatic hydrolysis of washed corn stover after size reduction to normalize particle sizes and removal of extractives confirms that pelleting improves corn stover digestibility. Such differences may be explained by the decreased particle size, increased specific surface area, improved cellulose accessibility, and reduction of the polymer length of cellulose induced by pelleting. These findings help to design processing schemes for sustainable and efficient use of lignocellulose.

Chen, Xueli↗

Best Methods for Fluoride Fuel Salt Dissolution and Digestion

This report serves as the deliverable for Milestone M4FT-26AN080502015 (Report on methodology for elemental/isotopic analysis of fluoride fuel salts). The review within this document is a summary of the current literature identified by Argonne regarding fluoride salt dissolution and digestion methods and provides guidance on selecting optimal fluoride dissolution and digestion methods for future fuel salt qualification studies. Methods are compared based on completeness of digestion, chemical hazards, and tradeoffs such as equipment needs or potential to introduce impurities. Recommendations are provided for best dissolution and digestion methods for uranium- and thorium-bearing salts, and ideas for key future experiments are described.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

VERIFICATION OF THE DEFENSE WASTE PROCESSING FACILITY PROCESS DIGESTION METHOD FOR THE SLUDGE BATCH 6 QUALIFICATION SAMPLE

For each sludge batch that is processed in the Defense Waste Processing Facility (DWPF), the Savannah River National Laboratory (SRNL) confirms applicability of the digestion method to be used by the DWPF lab for elemental analysis of Sludge Receipt and Adjustment Tank (SRAT) receipt samples and SRAT product process control samples.1 DWPF SRAT samples are typically dissolved using a room temperature HF-HNO3 acid dissolution (i.e., DWPF Cold Chem (CC) Method, see DWPF Procedure SW4-15.201) and then analyzed by inductively coupled plasma - atomic emission spectroscopy (ICPAES). In addition to the CC method confirmation, the DWPF lab's mercury (Hg) digestion method was also evaluated for applicability to SB6 (see DWPF procedure 'Mercury System Operating Manual', Manual: SW4-15.204. Section 6.1, Revision 5, Effective date: 12-04-03). This report contains the results and comparison of data generated from performing the Aqua Regia (AR), Sodium Peroxide/Hydroxide Fusion (PF) and DWPF Cold Chem (CC) method digestion of Sludge Batch 6 (SB6) SRAT Receipt and SB6 SRAT Product samples. For validation of the DWPF lab's Hg method, only SRAT receipt material was used and compared to AR digestion results. The SB6 SRAT Receipt and SB6 SRAT Product samples were prepared in the SRNL Shielded Cells, and the SRAT Receipt material is representative of the sludge that constitutes the SB6 Batch or qualification composition. This is the sludge in Tank 51 that is to be transferred into Tank 40, which will contain the heel of Sludge Batch 5 (SB5), to form the SB6 Blend composition. In addition to the 16 elements currently measured by the DWPF, this report includes Hg and thorium (Th) data (Th comprising {approx}2.5 - 3 Wt% of the total solids in SRAT Receipt and SRAT Product, respectively) and provides specific details of ICP-AES analysis of Th. Thorium was found to interfere with the U 367.007 nm emission line, and an inter-element correction (IEC) had to be applied to U data, which is also discussed. The results for any one particular element should not be used in any way to identify the form or speciation of a particular element without support from XRD analysis or used to estimate ratios of compounds in the sludge.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Microwave digestion preparation and ICP determination of boron in human plasma

A microwave digestion procedure, followed by Inductively Coupled Argon Plasma Spectroscopy, is described for the determination of boron (B) in human plasma. The National Institute of Standards and Technology (NIST) currently does not certify the concentration of B in any substance. The NIST citrus leaves 1572 (CL) Standard Reference Material (SRM) and wheat flour 1567a (WF) were chosen to determine the efficacy of digestion. CL and WF values compare favorably to those obtained from an open-vessel, wet digestion followed by ICP, and by neutron activation and mass spectrometric measurements. Plasma samples were oxidized by doubled-distilled ultrapure HNO3 in 120 mL PFA Teflon vessels. An MDS-81D microwave digestion procedure allows for rapid and relatively precise determination of B in human plasma, while limiting handling hazards and sources of contamination.

Ferrando, A. A.↗

Yearlong semi-continuous operation of thermophilic two-stage anaerobic digesters amended with biochar for enhanced biomethane production

This study aimed to scale up an integrated waste-to-energy system for producing pipelinequality biomethane from shake flasks experiments to two-stage digester systems with semicontinuous operation. The yearlong operation was successfully conducted to compare the performance of thermophilic anaerobic digestion (AD) of sewage sludge amended with corn stover biochar (CSBC) and pine biochar (PBC) to the control under various conditions. Both CSBC and PBC promoted the substrate utilization, methane productivity, and process stability of AD, while CSBC showed superior potential. CSBC enhanced methane content in biogas (CH 4 %) and methane production rate (P CH$_4$ ) by up to 25% and 37% respectively in comparison to the control, with maximum CH 4 % of 95% and CH 4 yield of 0.34 L/g volatile solid (VS)-added being achieved at steady state. The biochar supplementation also led to a substantial increase of the macro- and micro-nutrients (P, K, Ca, Mg, Fe) by up to 33 times in the digestate, increasing its fertilizer value. Finally, microbial community structure and dynamics were also investigated and compared, and in particular, CSBC promoted the abundance of Clostridia and Methanosarcina. Collectively, this study proves that pyro-biochar as an effective additive material enhances AD performance with continuous operation and that CSBC shows greater potential.

54 ENVIRONMENTAL SCIENCES↗

Anaerobic digestion of pressed off leachate from the organic fraction of municipal solid waste

A highly polluted liquid ('press water') was obtained from the pressing facility for the organic fraction of municipal solid waste in a composting plant. Methane productivity of the squeezed-off leachate was investigated in batch assays. To assess the technical feasibility of 'press water' as a substrate for anaerobic digestion, a laboratory-scale glass column reactor was operated semi-continuously at 37 {sup o}C. A high methane productivity of 270 m{sup -3} CH{sub 4} ton{sup -1} COD{sub added} or 490 m{sup -3} CH{sub 4} ton{sup -1} VS{sub added} was achieved in the batch experiment. The semi-continuously run laboratory-scale reactor was initially operated at an organic loading rate of 10.7 kg COD m{sup -3} d{sup -1}. The loading was increased to finally 27.7 kg COD m{sup -3} d{sup -1}, corresponding to a reduction of the hydraulic retention time from initially 20 to finally 7.7 days. During the digestion, a stable elimination of organic material (measured as COD elimination) of approximately 60% was achieved. Linearly with the increment of the OLR, the volumetric methane production of the reactor increased from 2.6 m{sup 3} m{sub reactor}{sup -3} d{sup -1} to 7.1 m{sup 3} m{sub reactor}{sup -3} d{sup -1}. The results indicated that 'press water' from the organic fraction of municipal solid waste was a suitable substrate for anaerobic digestion which gave a high biogas yield even at very high loading rates.

09 BIOMASS FUELS↗

Improved valorization of sewage sludge in the circular economy by anaerobic digestion: Impact of an innovative pretreatment technology

Anaerobic digestion (AD) of sewage sludge shows low carbon conversion efficiency (CCE) due to the poor biodegradability of sewage sludge. Here, the lack of digestibility is specifically linked to the waste-activated sludge (WAS) making up the majority of sewage sludge along with a smaller portion of primary sludge, depending on the wastewater treatment plant configuration. In this study, we examine the Advanced Wet Oxidation & Steam Explosion process (AWOEx) for improving the CCE of digested sewage sludge (DSS) by thermophilic AD. The effect of the pretreatment temperature in the range between 160 and 185 °C at a fixed residence time of 20 min with and without oxygen added at a dosage of 5 % of the organics present was tested. Methane yield improved by 97.92 % to 183.91 ± 4.93 mL/g vS over the untreated DSS (control), whose methane yield was 92.92 ± 9.07 mL/g vS We have demonstrated for the first time that 84 % of the organics in sewage sludge can successfully be transformed into biogas following AWOEx pretreatment, which can contribute significantly to the circular economy instead of greenhouse gas emissions from landfilling.

09 BIOMASS FUELS↗

Solubility of {sup 238}U radionuclide from various types of soil in synthetic gastrointestinal fluids using “US in vitro” digestion method

238U radionuclide is a naturally occuring radioactive material that can be found in soil. In this study, the solubility of 238U radionuclide obtained from various types of soil in synthetic gastrointestinal fluids was analysed by “US P in vitro” digestion method. The synthetic gastrointestinal fluids were added to the samples with well-ordered, mixed throughly and incubated according to the human physiology digestive system. The concentration of 238U radionuclide in the solutions extracted from the soil was measured using Induced Coupling Plasma Mass Spectrometer (ICP-MS). The concentration of 238U radionuclide from the soil samples in synthetic gastrointestinal fluids showed different values due to different homogenity of soil types and chemical reaction of 238U radionuclide. In general, the solubility of 238U radionuclide in gastric fluid was higher (0.050 – 0.209 ppm) than gastrointestinal fluids (0.024 – 0.050 ppm). It could be concluded that the US P in vitro digestion method is practicle for estimating the solubility of 238U radionuclide from soil materials and could be useful for monitoring and risk assessment purposes applying to environmental, health and contaminated soil samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly Stable Trypsin-Aggregate Coatings on Polymer Nanofibers for Repeated Protein Digestion

A stable and robust trypsin-based biocatalytic system was developed and demonstrated for proteomic applications. The system utilizes polymer nanofibers coated with trypsin aggregates for immobilized protease digestions. After covalently attaching an initial layer of trypsin to the polymer nanofibers, highly concentrated trypsin molecules are crosslinked to the layered trypsin by way of a glutaraldehyde treatment. This new process produced a 300-fold increase in trypsin activity compared with a conventional method for covalent trypsin immobilization and proved to be robust in that it still maintained a high level of activity after a year of repeated recycling. This highly stable form of immobilized trypsin was also resistant to autolysis, enabling repeated digestions of bovine serum albumin over 40 days and successful peptide identification by LC-MS/MS. Finally, the immobilized trypsin was resistant to proteolysis when exposed to other enzymes (i.e. chymotrypsin), which makes it suitable for use in “real-world” proteomic applications. Overall, the biocatalytic nanofibers with enzyme aggregate coatings proved to be an effective approach for repeated and automated protein digestion in proteomic analyses.

59 BASIC BIOLOGICAL SCIENCES↗

Anaerobic Co-Digestion of Vegetable and Fruit Market Waste in LBR + CSTR Two-Stage Process for Waste Reduction and Biogas Production

Vegetable and fruit waste (VFW) is becoming a heavy burden of municipal waste disposal because of its huge amount, but it is a potentially valuable resource that can be developed into high value products such as methane. Conventional anaerobic digestion processes are not suitable for solving the problem of easy acidification of VFW. Thus, a two-stage laboratory-scale anaerobic digestion system was assembled for waste reduction and biogas production of VFW in the mesophilic temperatures. The biphasic system consists of a 70-L leach bed reactor (LBR) and a 35-L continuous stirred tank reactor (CSTR). Water is sprinkled over the material to enhance the extraction process of acidification phase. The leachate was then transferred to the CSTR for biogas production. Batch digestion was lasted 120 h until no biogas was produced. Leachate with a volatile fatty acid (VFA) concentration of 7.6 g/L was obtained within 10 h. The results showed that overall 70.9% of the volatile solids (VS) was removed in the solid-phase system. Over 90% of VFAs were reduced in the methanogenic reactor, and it has been observed that the maximum biogas production rate was 51.26 mL/(d gVS). The maximum methane concentration in the produced biogas was 71%.

60 APPLIED LIFE SCIENCES↗

Effect of pelleting on the enzymatic digestibility of corn stover

Pelleting of lignocellulosic biomass to improve its transportation, storage and handling impacts subsequent processing and conversion. Here, this work reports the role of high moisture pelleting in the enzymatic digestibility of corn stover prior to pretreatment, together with associated substrate characteristics. Pelleting increases the digestibility of unpretreated corn stover, from 8.2 to 15.5% glucan conversion, at 5% solid loading using 1 FPU Cellic® CTec2 per g solids. Compositional analysis indicates that loose and pelleted corn stover have similar non-dissolvable compositions, although their extractives are different. Enzymatic hydrolysis of corn stover after size reduction to normalize particle sizes and removal of extractives confirms that pelleting improves corn stover digestibility. Such differences may be explained by the decreased particle size, improved substrate accessibility, and hydrolysis of cross-linking structures induced by pelleting. These findings are useful for the development of processing schemes for sustainable and efficient use of lignocellulose.

09 BIOMASS FUELS↗

Role of redox-active biochar with distinctive electrochemical properties to promote methane production in anaerobic digestion of waste activated sludge

Biochar has been reported as an effective additive to improve methane production during anaerobic digestion (AD). However, the mechanism for such a stimulatory impact remains unclear. Here we investigated the capability of three pyrolytic biochars with distinctive electrochemical properties (BC300, BC500, BC700) to promote methanogenic performance of anaerobic digesters treating waste activated sludge (WAS). The cumulative methane production and the maximum methane production rate were increased by 46.9% and 181.6%, respectively, with BC300 amendment. By characterizing the electrochemical properties of biochar, our research team found out that methane production in AD of sludge was positively correlated to biochar’s electron-donating capacity (EDC) rather than its bulk electrical conductivity. These results indicate that the electron transfer mediated by the redox-active functional groups may prevail over the direct electron migration as the predominant mechanism to facilitate interspecies electron transfer in syntrophic communities for enhanced methanogenesis. Microbial community analysis suggests that biochar enriched Methanosarcina and Methanobacterium. Overall, this study shows that functional groups-mediated electron transfer contributes greatly to the improved methane production in WAS digester with biochar amendment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sequential extraction of metals from mixed and digested sludge from aerobic WWTPs sited in the south of Spain

The content of heavy metals is the major limitation to the application of sewage sludge in soil. However, assessment of the pollution by total metal determination does not reveal the true environmental impact. It is necessary to apply sequential extraction techniques to obtain suitable information about their bioavailability or toxicity. In this paper, sequential extraction of metals from sludge before and after aerobic digestion was applied to sludge from five WWTPs in southern Spain to obtain information about the influence of the digestion treatment in the concentration of the metals. The percentage of each metal as residual, oxidizable, reducible and exchangeable form was calculated. For this purpose, sludge samples were collected from two different points of the plants, namely, sludge from the mixture (primary and secondary sludge) tank (mixed sludge, MS) and the digested-dewatered sludge (final sludge, FS). Heavy metals, Al, Cd, Co, Cr, Cu, Fe, Hg, Mn, Mo, Ni, Pb, Ti and Zn, were extracted following the sequential extraction scheme proposed by the Standards, Measurements and Testing Programme of the European Commission and determined by inductively-coupled plasma atomic emission spectrometry. The total concentration of heavy metals in the measured sludge samples did not exceed the limits set out by European legislation and were mainly associated with the two less-available fractions (27-28% as oxidizable metal and 44-50% as residual metal). However, metals as Co (64% in MS and 52% in FS samples), Mn (82% in MS and 79% in FS), Ni (32% in MS and 26% in FS) and Zn (79% in MS and 62% in FS) were present at important percentages as available forms. In addition, results showed a clear increase of the concentration of metals after sludge treatment in the proportion of two less-available fractions (oxidizable and residual metal)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗