Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “D LAYER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Motions and Initial Conditions in Star-Forming Dense Cores

The main focus was the study of star-forming regions through high spectral- and spatial resolution observations of mm-wavelength lines, and through models of the observations. The main accomplishments were a) demonstration that more than 15 starless cores show substantial evidence of extended inward motion at about half the sound speed; b) observations of infall asymmetry in several cores, in lines of N2H(+) and DCO(+), low- depletion tracers of the "inner core"; c) observation of "infall asymmetry" of spectral lines over approx. 0.5 pc in the NGC1333 cluster-forming region; d) observations indicating that cores are nearly at rest with respect to their envelopes; and e) development of analytic, power-series solutions to the equations of motions for condensing 1-D systems (layers, cylinders and spheres).

Myers, Philip C.↗
NASA NTRSDate not supplied

Investigation of Geomorphological Signatures of Permafrost in the Polar Lunar Areas With VIPER

A study of images of the polar regions shows that small craters near the poles of the Moon are distinguished by the following features: 1. they have a smoother shape - see Fig (a); 2. patterned ground (“wrinkled skin”) is often observed in and around the crater - see Figs (a,b,c); 3. outside the craters landslides and cracks are noticeable - see Fig (d); 4. layers or scarps are often visible on the inner slope - see Fig (e). These features (scarps and patterned ground) are typical for Martian craters in the permafrost zone (see Fig f), as well as for similar zones on Earth. It is hypothesized that these features of lunar craters are associated with the presence of permafrost in the polar regions of the Moon. In 2023, the VIPER rover will investigate the distribution of ice (volatile) deposits in the region of the Moon's South Pole. VIPER navigation cameras represent a unique opportunity for the geomorphological analysis of the lunar surface and the study of physical properties of regolith due to multiple key factors: - A large number of high-quality digital images with a good resolution of the South Pole of the Moon, which is a key region for the landing of manned expeditions. - A low position of the Sun, which generates long shadows, creates favorable conditions for object recognition algorithms. - A presence of a rover track in the images enables VIPER wheels to be used as tools for the study of the regolith and the development of a geotechnical model of regolith in the South Pole region. Rover navigation cameras will allow investigation of the distribution and shape of small craters and other structures along the path of the rover and test the hypothesis about geomorphological signatures of permafrost in the lunar polar areas. If a relationship between characteristics of lunar craters and the distribution of permafrost is confirmed, this will open a possibility to remotely determine the deposits of lunar ice from satellite imagery.

VIPER↗
NASA NTRS1990

Comparison of 3-D viscous flow computations of Mach 5 inlet with experimental data

A time marching 3-D full Navier-Stokes code, called PARC3D, is validated for an experimental Mach 5 inlet configuration using the data obtained in the 10 x 10 ft supersonic wind tunnel at the NASA Lewis Research Center. For the first time, a solution is obtained for this configuration with the actual geometry, the tunnel conditions, and all the bleed zones modeled in the computation. Pitot pressure profiles and static pressures at various locations in the inlet are compared with the corresponding experimental data. The effect of bleed zones, located in different places on the inlet walls, in eliminating the low energy vortical flow generated from the 3-D shock-boundary layer interaction is simulated very well even though some approximations are used in applying the bleed boundary conditions and in the turbulence model. A further detailed study of the effect of individual bleed ports is needed to understand fully the actual mechanism of efficiently eliminating the vortical flow from the inlet. A better turbulence model would help to improve the accuracy even further in predicting the corner flow boundary layer profiles.

Reddy, D. R.↗
NASA NTRS1992

Secondary instabilities in compressible boundary layers

The secondary instability mechanisms in a two-dimensional (2-D) compressible boundary layer over a flat plate have been examined for a range of Mach numbers up to 4.5. For subsonic and low supersonic flows, fundamental resonance dominates when the amplitude of the (2-D) primary disturbance is high, while subharmonic resonance prevails in an environment with a low primary disturbance. At a high supersonic Mach number of 4.5, the secondary instability of the second-mode primary is stronger than that of the first-mode primary. Further, the subharmonic and the combination resonance modes, which are slightly detuned from the subharmonic, are the dominant instabilities. The influence of the propagation direction of the primary disturbance on secondary instabilities is investigated at Mach 1.6. Whereas the fundamental and the subharmonic disturbances propagate synchronously with a 2-D primary wave, this is not true for an oblique primary. A subset of the secondary instability results is verified against direct numerical simulations. Some comparisons between spatial and temporal secondary instabilities have been made at Mach 1.6.

Ng, Lian L.↗
NASA NTRS1991

The 3-D Navier-Stokes analysis of crossing, glancing shocks/turbulent boundary layer interactions

Three dimensional viscous flow analysis is performed for a configuration where two crossing and glancing shocks interact with a turbulent boundary layer. A time marching 3-D full Navier-Stokes code, called PARC3D, is used to compute the flow field, and the solution is compared to the experimental data obtained at the NASA Lewis Research Center's 1 x 1 ft supersonic wind tunnel facility. The study is carried out as part of the continuing code assessment program in support of the generic hypersonic research at NASA Lewis. Detailed comparisons of static pressure fields and oil flow patterns are made with the corresponding solution on the wall containing the shock/boundary layer interaction in an effort to validate the code for hypersonic inlet applications.

Reddy, D. R.↗
NASA NTRS1991

3-D Navier-Stokes analysis of crossing, glancing shocks/turbulent boundary layer interactions

Three dimensional viscous flow analysis is performed for a configuration where two crossing and glancing shocks interact with a turbulent boundary layer. A time marching 3-D full Navier-Stokes code, called PARC3D, is used to compute the flow field, and the solution is compared to the experimental data obtained at the NASA Lewis Research Center's 1 x 1 ft supersonic wind tunnel facility. The study is carried out as part of the continuing code assessment program in support of the generic hypersonic research at NASA Lewis. Detailed comparisons of static pressure fields and oil flow patterns are made with the corresponding solution on the wall containing the shock/boundary layer interaction in an effort to validate the code for hypersonic inlet applications.

Reddy, D. R.↗
NASA NTRS1991

A laser velocimeter investigation of the normal shock-wave boundary layer interaction

Nonintrusive 3-D measurements were made of a normal shock wave/turbulent boundary layer interaction. The measurements were made through a quadrant of a square test section of a continuous flow supersonic wind tunnel in which a normal shock wave had been stabilized. Two dimensional measurements were made throughout the interaction region while 3-D measurements were made near the corner in the vicinity of the shock where 3-D flow effects were expected to be significant. Laser Doppler velocimetry, surface static pressure measurements, and flow visualization techniques were used for two freestream nominal Mach number test cases: 1.6 and 1.3. No turbulence information was obtained. The mean velocity measurements were converted to Mach number by recording the wind tunnel total temperature. Some shock oscillation was present during both of the test cases. After startup of the wind tunnel, the shock oscillated with an amplitude of approx. + or - 1 cm, however, after reaching steady condition, the shock oscillation amplitude was greatly reduced, as evidenced by the laser velocimeter results. The Mach 1.3 test case resulted in a nearly uniform flow without secondary shock waves and with no or very isolated corner separation.

Chriss, Randall M.↗
NASA NTRS1988

Slip velocity method for three-dimensional compressible turbulent boundary layers

A slip velocity method for 2-D incompressible turbulent boundary layers was presented in AIAA Paper 88-0137. The inner part of the boundary layer was characterized by a law of the wall and a law of the wake, and the outer part was characterized by an arbitrary eddy viscosity model. In the present study for compressible flows, only a law of the wall is considered. The problem of 2-D compressible flow is treated first; then the extension to 3-D flow is addressed. A formulation for primitive variables is presented.

Barnwell, Richard W.↗
NASA NTRS1991

Heat transfer, velocity-temperature correlation, and turbulent shear stress from Navier-Stokes computations of shock wave/turbulent boundary layer interaction flows

The properties of 2-D shock wave/turbulent boundary layer interaction flows were calculated by using a compressible turbulent Navier-Stokes numerical computational code. Interaction flows caused by oblique shock wave impingement on the turbulent boundary layer flow were considered. The oblique shock waves were induced with shock generators at angles of attack less than 10 degs in supersonic flows. The surface temperatures were kept at near-adiabatic (ratio of wall static temperature to free stream total temperature) and cold wall (ratio of wall static temperature to free stream total temperature) conditions. The computational results were studied for the surface heat transfer, velocity temperature correlation, and turbulent shear stress in the interaction flow fields. Comparisons of the computational results with existing measurements indicated that (1) the surface heat transfer rates and surface pressures could be correlated with Holden's relationship, (2) the mean flow streamwise velocity components and static temperatures could be correlated with Crocco's relationship if flow separation did not occur, and (3) the Baldwin-Lomax turbulence model should be modified for turbulent shear stress computations in the interaction flows.

Wang, C. R.↗
DOE OSTI2025

Charge Trap Layer Supercharging for Improved Bit Reliability in 3-D NAND Flash Under Proton Irradiation

Single-event upset (SEU) cross sections are reduced in 176-layer charge trap (CT) 3-D nand devices under proton irradiation when multiple write operations are applied sequentially without the typical erase-before-write. Here, this effect is observed for multiple data patterns and in both single-level cell (SLC) and triple-level cell (TLC) operating modes. SEU cross section calculation methodologies are discussed for highly scaled 3-D devices both with and without the application of rewrites, and potential implications for long-term endurance effects are proposed.

Breeding, Matthew Luel [Sandia National Laboratori↗
NASA NTRS1989

Updated users' guide for TAWFIVE with multigrid

A program for the Transonic Analysis of a Wing and Fuselage with Interacted Viscous Effects (TAWFIVE) was improved by the incorporation of multigrid and a method to specify lift coefficient rather than angle-of-attack. A finite volume full potential multigrid method is used to model the outer inviscid flow field. First order viscous effects are modeled by a 3-D integral boundary layer method. Both turbulent and laminar boundary layers are treated. Wake thickness effects are modeled using a 2-D strip method. A brief discussion of the engineering aspects of the program is given. The input, output, and use of the program are covered in detail. Sample results are given showing the effects of boundary layer corrections and the capability of the lift specification method.

Melson, N. Duane↗
NASA NTRS1988

Numerical simulations of thermal-chemical instabilities at the core-mantle boundary

Numerical simulations of thermal-chemical instabilities in the D-double-prime layer at the core-mantle boundary are presented which show that strong lateral heterogeneities in the composition and density fields can be initiated and maintained dynamically if there is continuous replenishment of material from subduced slabs coming from the upper mantle. These chemical instabilities have a tendency to migrate laterally and may help to support core-mantle boundary topography with short and long wavelengths. The thermal-chemical flows produce a relatively stagnant D-double-prime layer with strong lateral and temporal variations in basal heat flux, which gives rise to thermal core-mantle interactions influencing the geodynamo.

Hansen, Ulrich↗
NASA NTRS1988

Numerical solutions of the complete Navier-Stokes equations

The physical phenomena within supersonic flows that sustain chemical reactions are investigated. An earlier study to develop accurate physical models for supersonic reacting flowfields focused on 2-D laminar shear layers. The objective is to examine the mixing and subsequent combustion within turbulent reacting shear layers. To conduct this study, a computer program has been written to solve the axisymmetric Reynolds averaged Navier-Stokes equations. The numerical method uses a cell-centered finite volume approach and a Runge Kutta time stepping scheme. The Reynolds averaged equations are closed using the eddy viscosity concept. Several zero-equation models have been tested by making calculations for an H2-air nonreacting coaxial jet flow. Comparisons made with experimental data show that Cohen's eddy viscosity model provides best agreement. The finite rate chemistry model used in the study of 2-D laminar shear layers is incorporated into the computer program and data is compared from a recent experiment performed at NASA Langley.

Hassan, H. A.↗
NASA NTRS1991

Modeling of the heat transfer in bypass transitional boundary-layer flows

A low Reynolds number k-epsilon turbulence model and conditioned momentum, energy and turbulence equations were used to predict bypass transition heat transfer on a flat plate in a high-disturbance environment with zero pressure gradient. The use of conditioned equations was demonstrated to be an improvement over the use of the global-time-averaged equations for the calculation of velocity profiles and turbulence intensity profiles in the transition region of a boundary layer. The approach of conditioned equations is extended to include heat transfer and a modeling of transition events is used to predict transition onset and the extent of transition on a flat plate. The events, which describe the boundary layer at the leading edge, result in boundary-layer regions consisting of: (1) the laminar, (2) pseudolaminar, (3) transitional, and (4) turbulent boundary layers. The modeled transition events were incorporated into the TEXSTAN 2-D boundary-layer code which is used to numerically predict the heat transfer. The numerical predictions in general compared well with the experimental data and revealed areas where additional experimental information is needed.

Simon, Frederick F.↗